N96 Video Camera Mode - Noise Movies

Dear All,
I love my phone so far, but I'm bit disapointed with the audio of the movies that I can make with my phone, I had a 5300 and the audio quality was better.
I have TOO MUCH noise, even when I somehow try to close the mic. Even doing that I can still get sound...
Looks like the mic volume is TOO HIGH, and I can not adjust it.
Anybody have the same problem?
Any tip or trick?
Regards
Juliano
Jay
N96 16GB

I have this same problem but with some added caveats...
If I copy the recorded video to my computer and play it from there then there is no noise i.e. it only occurs when playing through the N96.
Also, I get the same really annoying loud hissing when playing games through N-Gage. The only 2 I have installed so far are Tetris and Reset-Generation - It happens with both of these unles I turn the sound off in-game.
Was wondering if you chaps have the same extra issues or if it's just limited to recorded videos.
I spoke to Three "Technical" support yesterday who have given me the name/number of a local repair centre to go and get the handset checked, but I'm thinking it's more likely to be a firmware issue, as I'm on Three UK and the software version is still 10.065, with Three not able to tell me when/if they'll release an update (tempted to change product code & update anyway - invalidating warranty I know).
Other than that, after having had the phone over the weekend I'm pretty chuffed with it (speed has improved since I first got it), other than the battery, but then if I do run GPS, 3G and BBC iPlayer at the same time for a few hours it's to do be expected!
Any thoughts on the audio thing? Same issues for you guys or am I on my own?
Cheers.

Similar Messages

Nokia N96 Video Recording Problem - Noise

how can you remove the noise problem accumulated during recording? I was in a club near some speakers.The sound is distorted please check the recording
http://tinypic.com/r/ir52tv/5

I WILL NEVER BUY A NOKIA PHONE
MY NEXT PHONE WILL BE THE APPLE IPHONE 4G
NOKIA IS A S### !!!

How do I import a home movie into I movies from a video camera when it says format not valid

How do you import a home movie straight from your video camera to i movies when it advises format not recognised.

iMovie
http://www.apple.com/support/imovie
http://www.apple.com/support/ilife

Video Camera Doesn't Auto-Focus Nokia X2

My phones camera doesn't focus while in video camera mode... whereas when i bought this phone new, that time it was doing a proper job... Sometimes even when my camera is in photo mode it doesn't focus properly.... In video mode it doesn't do totally... i think it is the camera's lenses fault as the lenses must focus automatically it is a hardware defect i dought.....

Hi, SankarNamah. Does this issue happen regardless if the led flash is turned on or not? Are there any changes if you change the camera settings of the phone? May we know where are you located? Have you already read the post made by @armagon? If not yet, here it is:
v. 2.1.0.13 was published and it's for Middle East region only (will not be available elsewhere), and contains a few minor settings changes -> main content included in your phone is still exactly the same as in v. 2.1.0.11/2.1.0.12 releases.
We'll wait for your reply.

Is the video camera always in 720p?

i was just wondering whenever you switch to the video camera mode, is it always in 720p?

I posted a question on getting iPhone video to Apple TV. I just figured out the process myself.
Figured out a 3 step process.
1. Import video from phone to iPhoto.
2. Right click on video and choose edit. Mine opens in Quicktime.
3. Click on Share -> iTunes -> Apple TV.
It downgrades some in quality but it looks pretty good on my 48" tv.

Aluminium macbook to sony pc5e (dv video camera) connectivity

Hi, hope someone may be able to help. I have an old sony pc5e mini dv video camera and would like to connect it to my aluminium mac to download some content. Is this compatible and if so, what would I need in terms of cables and software etc. I would assume that unless a firewire input is available then it won't work? Any assistance would be greatly appreciated. Thanks very much.

I had similar problem. Bought new HDR-HC9 camera. Took tape from older mini dv camera, and recorded some test footage. Created new imovie project, and the portion of the tape recorded in hi def comes over fine, the portion of the tape recorded in standard (on the old camcorder) all I saw was the blue screen.
I also tried playing and importing some tapes that were recorded entirely on the old camera (no mix of hi def and standard on the same tape) and had the same result: iMovie saw camera, would control rev and play, video would play on camera but iMovie has blue screen.
I tried the iLink setting from the camera playback menu (HD->DV conversion) with no luck. I made sure my iMovie project was appropriate for the recorded mode (DV widescreen) with no luck. Then I happened on the solution. Go to the camera settings in video camera mode, change the recording mode from Hi Def to standard DV. At this point all the tapes recorded in standard mode (DV widescreen) from the old camera can be imported into iMovie6 just fine. I know this sounds weird, since the record mode should not effect playback (?) but it works none the less.
I have not yet experimented with importing hiDef footage with camera in standard record mode, but I expect that if there are problems, that making sure the record mode on the camera is synced with the type of footage you are playing into iMovie is the solution.
Hope this helps.

LabVIEW Platform for Domestic Applications - Video Camera

Hello!
I’m looking into the possibility of using LabVIEW for some domestic type applications. For example, I’d like to automate the movement of a domestic type video camera. The movement would be realized with a type of low power motor with SCPI compatibility. A couple of questions to be asked:
1)      Do these types of low-powered motors exist that can support SCPI commands over a physical layer such as USB? If not, do some type of converters exist?
2)      Can a commercial grade video camera be sufficient?
3)      I would suspect that this type of application would address the Motion & Vision functions of LabVIEW?
4)      Does any supported NI documentation exist for this specific application?
Thank you in advance for your time & efforts!

Hi,
Thank you for posting on the National Instruments discussion forums.
Regarding the questions you have about your application:
1) Typically, motors require a separate drive to interpret commands received through a USB or serial port and convert these to signals of the type needed by the motor. I am not familiar with any motor which integrates the necessary hardware to do this, but it may exist.
2) Most consumer cameras are not compatible with our IMAQ for IEEE 1394 or IMAQdx drivers because they output data in a compressed format. This is explained in the following Knowledge Base article:
http://digital.ni.com/public.nsf/allkb/AFDED7F599E8A73A8625689E007672E5?OpenDocument
3) If you do have a supported camera, the IMAQdx drivers will allow you to interface with the camera. To interface with the camera in LabVIEW, you will also need the Vision Development Module. More information on the VDM can be found here:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/2881
In regards to the motion portion of your application, NI-Motion will allow you to interface between one of our motion cards and a motion drive. If you will be communicating with your motor through a USB or serial port, you will use the VISA functions in LabVIEW.
4) The IMAQdx drivers include shipping examples which demonstrate how to interface with your camera in LabVIEW. These should serve as a good starting point for your application.
I hope this helps you get started with your application. Please reply if you have any follow-up questions. Thanks.
Rishee B.
Applications Engineer
National Instruments

IPod freezing in camera mode

I was taking a video, and when I was done recording it, i tried to turn it off. It froze. Now it's freezing in camera mode. The picture is how the video camera mode loads. It's been in the same spot for more than 2 hours and it won't turn off. What should I do?

iPod Nano 5th Gen. User Manual
iPod: Frequently Asked Questions
iTunes & iPod Hints & Tips
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

HT3775 I have a bunch of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document "001.MPEG" could not be opened. A required codec isn't available." Any advice on getting these to play?

I have a slew of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document “001.MPEG” could not be opened. A required codec isn't available." Any advice on getting these to play? Thanks!

Try installing Perian or VLC. Some AVIs require a codec which simply isn't available for Mac OS X.
(85018)

Cannot switch to camera mode to import video footage

Hello,
I've been making movies by importing small video clips from my camera. Just dragging files around, no problem.
Now I need to import footage from my video camera. The camcorder is connected but iMovie doesn't switch to camera mode. Instead I can take videos of myself with the built-in iSight. When I click the camera icon, the pop-up menu shows "Built-in iSight and Time Lapse". How can I import my video footage??
I look forward to getting HELP! Thanks!
iMac Mac OS X (10.4.7)
iMac Mac OS X (10.4.7)

Hi Bengt and thanks for the tips.
I have a Sony video camera no: DCR-TRV25E. It is on play (VCR), not record.
I think the main pb is that I don't know the difference between FireWire and USB ;-(
I am using the same cable I use when I import photos with my digital camera (Canon) into iPhoto. As this cable fit in nicely in my video camera, I didn't even wonder about it. I shall go through my messy "unused cables" box asap!
Thanks again!
Yours anna
iMac Mac OS X (10.4.7)
iMac Mac OS X (10.4.7)

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

Yes. A couple of ways that might work.
First Way
What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence. Does it display correctionly?
OK, select the clip in the hd timeline and copy (command-c). Now go to the HD sequence with the material that's distorted. Select all (command-a) and paste attributes (option-v) and choose basic motion and distort. That should maek things work. What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence. That I'm pretty sure you'll have to redo.
Second Way.
Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline. You then should be able to reconnect these clips with your original HD media.

Macbook pro fails to read sd card with movies recorded on it, any ideas? I can view them in the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it.

My macbook pro is failing to read a new sd card with movies recorded on it. Any ideas please? A previously used SD card has downloaded without problems. I have tried using a card reader as well as downloading from the video camera itself, neither works.
I can view the latest recordings on the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it but didn't think of that at the time. Obviously don't want to do this now as it will wipe the movies.

Hi and Welcome to the Forums!
From everything you've described, you've done everything possible. Hence, I recommend you seek out your warranty support.
Good luck and let us know.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Stop video, switch back to camera mode

My iPad mini will not allow me to return to camera mode from video mode

Just swipe up or down anywhere on the screen until the camera mode is highlighted in yellow text on the right side of the camer screen. The selected mode appears in yellow.
Swipe up and down - not left and right.

I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

Ipad does not. Revert from video mode to camera mode

ipad 2 does not revert to camera mode from video mode

Such a simple thing but not intuitive - thanks. It was driving me crazy!

N96 Video Camera Mode - Noise Movies

Similar Messages

Maybe you are looking for