N97 and SAP V2 Bluetooth

Hi
I have a Mercedes Benz E220 CDI with the COMAND systems and a SAP V2 Bluetooth cradle, which I currently use in conjunction with my Nokia N95
I am consiering buying the new N97 and want to know whether it is compatiable with the SAP V2?
Can anyone help?

I can help. I have that running since yesterday when my new N97 came and it runs like magic. Not only is the pairing relatively easy but the remote access works wonderfully. Then you press 0000 / dial on the Car phone (MB Command in my case) and the phone book is transferred to the Merc including ALL !!! numbers that you have per contact. In other words no more multiple entries in your Outlook, just because the stupid Bluetooth in your car can't handle multiple numbers per contact. Hats off to the folks at Nokia. Nice Bluetooth SAP implementation.
The one thing you need to know is that the MB command takes a very long time for the initial pairing and phone book transfer. It takes for absolutely ever and while it is working on it it constantly gives you messages to the effect that 'no phone is detected' and 'no connection can be established' and "Sorry but you are a total loser" etc. when in fact everything is absolutely fine. This threw me the first time I did this. Once you have the pairing completed, just dial for zeros and hit dial and let it do its thing and give it 10 mins or so. Once you are set up, in the future you just get in the car and everything is automatic, as long as you have Bluetooth enabled on the phone.
However, it does not stop there. WHILE you have your N97 paired up in SIM ACCESS mode, you go to the N's music player, start your favourite music, select random play, switch on the FM transmitter on your phone and the thing will actually start transmitting your favourite music to your car radio in great quality. Now, THIS is all you ever wanted from a mobile comms system and never dared to ask, a clean car interior in terms of radiation, sweetened with some smooth music from your mobile phone and all with just one device. I got so carried away, that I actually fiddled on my car's command system in order to switch tracks on the N. Took a minute to realize I was listening to a Radio station called Nokia which was what appeared on the Radio's Display as the Broadcast Station's name ;-). Obviously I don't know about any other cars. Mine is a SL350 / 2007 with its standard MB command system.
I then figured that my radio actually supports WAP and also gives me access to my SMS text messages, including text or voice response option. Next thing I'll try is whether I can get a stock ticker or RSS feed of sorts pushed to my radio display via WAP. As you figure by now I am very happy with the N97. It is an expensive phone but if it holds up mechanically, I think I will be using this for a long time.

Similar Messages

N97 - unable to perform bluetooth operation

Hi,
for some reason my bluetooth stopped working. As you see I got this message when trying to turn it on: unable to perform bluetooth operation.
I've tried to hard reset the phone, restore factory defaults, I've even flashed it with new firmware even though it was the latest installed. (11.0.021)
Is there anything I can do to fix this?
Thanks in advance.
ex N97 20.0.019 owner
Happy iPhone owner with ALL features actually working :]

I come to use the Bluetooth. ( The Same as Everybody Else!!!!!!)
It won’t switch on! Unable to perform Bluetooth operation. It keeps coming back with.
Other things I’ve tried:
Taking a photo & Song and send via Bluetooth. It ask me: Bluetooth is currently switched off. Switch on? So press Yes. Comes back with: Unable to connect!
Done Factory Reset!
Even tried taking sim out. This gets you a little further, But when you press Yes it Freezes the Phone!
I’ve updated the software:
Software Version
V 20.0.019
Software Version Date
13-10-09
Custom Version
20.0.019.C01.01
Custom Version Date
13-10-09
Language set
38
Model
N97
Type
RM-505
But to no avail same thing.
Please can someone help me resolve this problem or give me a fix.
I’ve always had Nokia. I’m beginning to rethink.
Many regards

N97 and HandsFreeLink

Does anyone have a problem setting up your N97 and the Handsfreelink in your car? For some reason N97 does not recognize the Handsfreelink system. The pairing process works and the bluetooth recognition works just when I want to make a phone call I hear nothing and nothing will connect.Worked fine with the N95. ( I am starting to miss my N95 now).
Just wondering ....

ll give mine a go in the next few days and let you know what happensI

What is difference between SAP R3 And SAP IS Mills Product

HI Friends
What is difference between SAP R3 And SAP IS Mills Product
What are the futures are availables in IS MIlls
Regards

Hi,
SAP R/3 is the central enterprise version. It is not specifically designed for any inducstry sectors and it can cater many of the industry types.
Is is developed for specific industries an for SMB's (small and medium business). It will have components specifically for the industry.
The SAP Mill Products component adds sector-specific functionality to an ERP system to satisfy the complex requirements of mill industries (e.g. metal, wood, paper, textiles, construction materials, and cable sectors).
These industry segments differ from others primarily in that the materials used have a large number of characteristics and variants. The materials in the segments listed above are also predominantly area-based (e.g. paper, textiles, plastic film) or length-based (e.g. cables, piping). Account must be taken of these material characteristics throughout the entire supply chain.
To cater for the particularities of these industry segments, SAP Mill Products features processes and functions that cover the entire supply-chain cycle from product design and configuration, through planning, order processing, capacity planning and production, to final delivery. Additional functions are available in costing and inventory management. SAP Mill Products are also integrated into Quality Management, Financial Accounting, and Controlling.
Prase

Using ale u can send from sap to sap and sap to non sap systems

hi,
using ale u can send from sap to sap and sap to non sap systems,
then what is diff b/w ALE and EDI

Hello KALYAN KUMAR,
Application Link Enabling (ALE)
1.You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems.
2.ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
3.ALE enables the integration of business processes across several SAP or non-SAP systems.
Electronic Data Interchange (EDI)
1.You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor).
2. The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12).
3. This enables communication with non-SAP systems.
By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message
I hope u understands the difference:)

How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS

Hi
I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
Does anybody know where this file went or can somebody tell me an alternative place to get this file?
Jacob

Please open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
Hope that works!
Elise

Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM

Hello ASUG Community.
I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM. The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
The question I've been trying to design around is "where to store the SAP-MDM item number"?
I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality? It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s. Or can this be done using the standard OCI functionality?
I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
Any insight would be most appreciated.
Thanks. Sincerely,
Rich Wortmann

I would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
Sorry not sure about the BADI to use.

Loading transaction data to CRM and SAP/R3 from legacy system

Where can I find information about expected timing to load orders from a legacy system to CRM and SAP R/3? Does anyone know how long it would take to do the update in CRM using RFC's and BAPI's and then load to SAP/R3 if the order had an average of 3.2 line items per order and there were 50.7 million orders? It is assumed we would run multiple loads concurrently. So I guess a better question is how long does it normally take to load one order with 3.2 line items onto CRM and also SAP R/3?
Any advise would be greatly appreciated. Thank you.

Hi Qutubuddin,
Can you please let me know how you achieved moving data from non sap system to r3 using webdynpro java?
thanks
sunil

Reporting tools and SAP BW

Dear Sirs,
We have Business Objects BI 4.0 and SAP BW 7.3.
Actually we are using Web Intelligence and BEx Query to reporting.
We have not Business Layer (Universe) between BW and BO because BO it's not supported to create universe (unx) on BW. So we create document in WEBI using BEx Query.
We want to use Xcelsius (Dashboard Design) 2011 and I was thinking that we can use query from universe to connect with BW (new functionality in version 2011). Can we? Or maybe we should to connect to BW using "Connecttion to SAP BW"?
We want to use Explorer (on iPad and iPhone), but Explorer requires universe (unx).
Is not possible to create universe (unx, because unv is not supported via Explorer) based on SAP BW, is it true?
We should we do, when we want to use Explorer with SAP BW?
Do I understand connection between reporting tools and SAP BW:
Crystal Reports - can I use cubes or BEx queries
Xcelsius - using "Connection to SAP BW"
WEBI - BExqueries or universe (but only UNV - old version).
Explorer - in my opinion is not possible
Analysis for OLAP - drirect to cube in SAP BW
Could you please comment.

Hi
With the current version of the BI 4.0 SP2 BI Platform, one cannot create a universe (.UNX format) against BW using the OLAP connection. However you can create a universe (.UNX format) using the Relational connection (see OSS note: 1656905 - How to create UNX universe based on Business Warehourse InfoCubes). One limitation is the use of hierarchies with the relational connection.
Then you can create the Information spaces based on the universe (.UNX format) that the Explorer can use.
BO Reporting tools:
1. Crystal Reports for Enterprise = you can use the OLAP connection (BICS) directly against the BW InfoCubes or Queries, if queries already exist in the BW system then you can leverage these directly (less time spent recreating the entire query in Crystal)
2. Xcelsius = you can use the BICS or Web Service or Universe to access the data
3. Web Intelligence = you can use the OLAP Connection (BICS)
4. Explorer = you can use a universe (.UNX format) via a Relational Connection
5. Analysis for OLAP = you can use the OLAP connection (BICS) to either a query or InfoCube.
It is hoped that in Feature Pack 3 which will be released later this year, that missing functionalities will be delivered for BI 4.0.
Regards
Derek

Re: Crystal Report and SAP BW Query with Variable

Crystal Report 2008 V1 SP3 and SAP Integration Kits 3.1 SP3 installed on my client machine.
I can open SAP BW Query in Crystal Report. However, in the Field Explorer >Database Fields, I dont see to be able to expan the Query and see it Key Figure/Characteristic.
I noticed this happen only if we have Variable defined in the Charactics.
If the characteristic has no variable, then I can expand the Query under Database Fields.
Do you have this problem?

Yes, once I have imported the new SAP Integration Kits XI 3.1 SP3 transports into BW system, I can now expand the it.
I can now see the Variable in Crystal Report.
Thanks!

Where do i find daily posted question on sap abap and sap webdynpro abap

Hi
where do we find Daily posted questions on sap abap and sap webdynpro abap in scn sap so that i can go through the questions and answer them .

Hi,
Go to the Content tab of any space and click on discussions. Then you can sort them by date created or any other
For ex: This link for WDA discussions: - Web Dynpro ABAP
You can also click on Receive email notifications for any space to get updates on that space.
hope this helps,
Regards,
Kiran

Crystal Reports and SAP BO XI 3.1 License purshase

Dear Professionals,
My company is looking forward to go for Crystal Reports 2008 from BEx.
I am looking for link for purchasing license for Crystal Reports and SAP BO XI 3.1 as well.
Besides the above, i am currently working on a free trial version of Crystal Reportds and also installed Crystal Viewer to publish the reports on the portal, but it was asking for Java Connector license key.
So, in addition to the above i also want to know the pricing for License of Javas Connector (JCo)
Your help is appreciated.

Hi
the Java connector is available here
service.sap.com/connectors
Regarding licenses and pricing I would recommend to contact your local SAP sales office.
Regards
Stratos

Crystal Report and SAP BW and BOE Server

Hi,
I have installed the following on my local PC:
1) Crystal Report (51038906 CRYSTAL REPORTS 2008 V1 SP3 Win Server on IA32 32bit) on my local machine.
2) SAP Integration Kits XI 3.1 SP3 (follow Ingo's document, but under the "Component", I only select the "Client" as I installed this on my local machine)
In Crystal Report, I can build new report on top of SAP BW Query. I can save into BW System via menu SAP ->Save as
In Crystal Report, menu File ->Save as, there I have the option Enterprise. When I click on the Enterprise, I can logon and save the crystal report into the BOE folder that I created, but encountered this error:
Failed to commit objects to server:
Create operation fails
Do you know what's the problem?
At the moment, I have installed BOE XI 3.1 SP2 and SAP Integration Kits XI 3.1 SP2 on the BOE Server. Do you think this is the cause of the problem (I am using SAP Integration Kits XI 3.1 SP3 on my local PC)?
Any help will be appreciated.

To start with there is no SP1 for XI 3.1
The version number 12.x.y.z can be read as follows:
12 means that you have BusinessObjects XI 3.something
x is the Service Pack Number. If x=1 this means that BOE XI 3.1 is installed. XI 3.1 is considered to be BO XI 3.0 with SP1.
z is the number of fix pack.Note that 0 means that you do not have any Fix Pack installed.
So if you see something like:
12.2.4.z
you can assume that you have BO XI 3.1 with SP 2 and FIx Pack 2.4 installed
In your case
12.1.0.z
means that you have BOE XI 3.1 installed.
Regards,
Stratos

Keynote and photos via bluetooth

A couple of questions regarding Keynote for iPad and photos:
Any way to take a photo from a non-iPhone and have it bluetooth to the ipad so I can use the photo in a keynote presentation?
Better yet, any way to have keynote grab a bluetooth photo automatically and place it in the right slide vs. bluetoothing in to photos area and then me moving it physically?
thanks forum members!

Thanks, yes email is an option, but in a non-wifi area for people not using 3G, how can we auto-magically get the photo bluetoothed to the iPad for use in Keynote?
Android phone to iPad via bluetooth is the basic question
Second part is the magic of having Keynote "grab" the photo and place automatically

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

I asked same question
Any answers

N97 and SAP V2 Bluetooth

Similar Messages

Maybe you are looking for