N97 camera does not work when i open the len cover

I think the camera softeware has bug. Tthe camera software shows up when all the menu, and when i click i can see the zoom in/out slider but nothing there is no image showing up on the screen. The screen is dark and it looks like the camera sensor does not receive any image from outside. This can be fixed by restarting the phone but it's very annoying. I had to reset like 10 times a day. If i leave the software on it's fine but if i turn off the software (close the lens cover) and turn back on the bug occurs. Anyone has the same issue like me? Do i need to update the firmware? Im on the original firmware.

it does not happen all the time to me, but sometimes if I open and close it to often, it would happen.
but I don't need to reset the phone, just close and open the len cover again, and it works.
Message Edited by walkmancat on 05-Jul-2009 05:52 PM

Similar Messages

My camera will not work when I open the app the screen is blank

When I turn on the camera app the screen is blank, any suggestions

Try closing the Camera app completely and see if the camera works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting general

my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution

restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired

When I open a link in gmail the website opens as a completely black page and when I click anywhere in the page the whole thing turns white and there is nothing showing. This does not happen when I open the same link in IE

When I click on a link in gmail it will open the website as a black page. When I click anywhere on the page it turns completely white with nothing there. This does not happen when I open the same link in IE
== URL of affected sites ==
http://all

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

My camera does not work after I restored the system, how can I use it again?

My camera does not work after I restored the system, how can I use it again?
Thank you for your help!

Did try to restore "as new device" without using the backup after that?
Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

The remote does not work, when i turn the tv on I see the apple tv and the itune icon on the screen

the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.

Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV

Web cam does not work (no webcam on the device list to upgrade o to find driver )

Can anyone help i just change the os to win7 64 bit from 32 bit and the webcam doesnt work, i cant even find it on the device list, and when i try to use it says that none webcam are conected, help plz ?

Hi BlackPack,
You probably need to download and reinstall the driver for your Webcam. I checked and it is available for your computer at your computer's website.
Below are the instructions to find and install the driver.
For your computer, the Webcam software is called MediaSmart.
Download New Driver for your Webcam:
If you are having real issues getting your webcam to work, or if you have recently upgraded you Operating System, you may have to reinstall your webcam software.
NOTE: If all else fails and you cannot find a driver for YOUR Operating System, note that sometimes Vista drivers will work on Windows 7; Vista came first - Windows 7 and Vista remain closely related. Just tell your website that you have Vista and see if there is a driver for you under Vista. If even that fails, ask again for assistance and we can look for a driver for you that will work.
Go to the top of the HP forum page to Support and Drivers
Enter your Computer Model information, and then go to Software and Drivers...
Enter your Operating System in the Drop-down menu... Scroll down
Look for category Software - Multimedia
Select the appropriate Cyberlink YouCam Software OR MediaSmart Webcam Software – if available for your system
Save the appropriate *.exe installation package on your computer
NOTE the name and the location - the *.exe file will likely save to "Downloads “
I hope this helps!
We work hard to help!
Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Dragon Tips:
For those using MediaSmart:
MediaSmart Software Webcam Feature
Bookmark your Website!
Because you just changed your OS, you might want to Bookmark the link to your computer's website so you can check back to it in case you need to pick up other software or drivers at a later time. There is a lot of information at your website: manuals, how-to documents, software and drivers.
Recovery Media for your Operating System!
If you have never done so, be sure you have either created your own or ordered your Operating System Recovery discs from HP! If available, you can check for the Recovery discs at your computer's website under "Order Recovery Media"
Kind Regards,
Dragon-Fur

I downloaded hidemyass to change my ip address,but firefox does not work, when i open hidemyass program?

When using www.hiemyass.com to change my ip address, for the city i am posting ads in. For some reason,
firefox is unable to open up the addresses i place in the browser. Firefox responds by indicating that it's unable to locate the site? How can i make firefox work with the hidemyass program?

Here is the Hide My Ass support forum - http://forum.hidemyass.com/

Why spark videodisplay control does not work when i run the application?

Even in the mode design I can not see the video, thks.....

@Jorge,
Try using file:/// instead of file:/.
This seems to work for me:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx">
 <s:VideoDisplay x="159" y="96"
 source="file:///C:/Documents and Settings/pdehaan/My Documents/My Videos/walking.flv"
 loop="true"
 width="384" height="267"/>
</s:Application>
But I'd probably recommend copying the .FLV file into your Builder project or putting it online instead of trying to play it back from a hardcoded file:/// path.
Peter

Css3 animation does not work when triggerd by backing bean method

Hi,
I use Jdev 11.1.1.4 (but I guess the Jdev/ADF version does not matter in this case) and Firefox 15.0.1.
I tested some parts of article https://blogs.oracle.com/groundside/entry/css_animations_the_panel_flip from Duncan Mills.
The CSS3 animation for styleClass "rotateOut" works fine when I trigger it from mouse hover.
The problem is that the animation does not work when I set the styleclass in a backing bean.
In this case the UI component to rotate (in my case the calender component) changes immediatelly to the transition target without the transition-duration of 2 seconds and therefor there is no animation effect visible for the user.
Here the backing bean code:
    public void doRotate() {
       afCalender.setStyleClass("rotateOut");
       AdfFacesContext.getCurrentInstance().addPartialTarget(getAfCalender());
    }Here the skin:
.rotateOut {
    -moz-transition-property: -moz-transform;
    -moz-transition-delay: 2s;
    -moz-transform: rotateY(45deg);
    -moz-transition-timing-function: ease-in-out;
    -moz-transition-duration: 2s;
.rotateReturn {
    -moz-transition-property: -moz-transform;
    -moz-transform: rotateY(0deg);
    -moz-transition-timing-function: ease-in-out;
    -moz-transition-duration: 2s;
}In Duncan's article java script is used to change the style class.
Does the CSS3 animation only work when java script is used to change the style class or shoud java in a backing bean also work?
Any hints?
regards
Peter

I have tested several other settings but no success.
Any ideas?
regards
Peter

Fault policy does not work when throwing remoteFault in bpel

Hi
I have a BPEL-proces in which I throw a remoteFault.
In the fault-policy there is a condition for this fault
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-java"/>
</condition>
</faultName>
But the fault-policy does not work if I throw this remoteFault in de bpel. But when I invoke another service (which is shutdown), then I get a remoteFault and for this remoteFault the fault-policy works well.
Any idea why the fault-policy does not work when I throw the remoteFault?
Regards

BPEL fault works only on invocation failures.
Fault management will work based on the remote fault from the remote service, you cannot throw remote fault from bpel and capture that in fault management and process.
The following are the actions that we can take on faults.
1. Human Intervention
2. Rethrow [rethrowFault]
3. Termination [abort]
4. Replay Fault [replayScope]
5. Custom Java Action [javaAction]
6. Retry [retry]
Hope this helps !!!
Thanks,
Vijay

I just bought an Iphone4 from straight talk and my camera does not work. The shutter wont open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile and now that I have it, it does not work properly. Need help

I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
Thanks

Take the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace. Since you say iPhone 4, was this a used or refurbished iPhone?

When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

HT203254 my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

My iPhone 6 panoramic camera does not work properly: the arrow does not turn when i turn my phone. Furthermore sonetti da my Keyboard does not turn as well. What do you think si the problem?

My iPhone 6 panoramic camera does not work properly: the arrow does not turn when i turn my phone. Furthermore sonetti da my Keyboard does not turn as well. What do you think si the problem?

Furthermore my keyboard does not turn sometimes as well

N97 camera does not work when i open the len cover

Similar Messages

Maybe you are looking for