N97 cannot use as modem after firmware upgrade

Hi, sorry if this is a repeat post but driven to distraction.
I use my N97 as a modem to connect to the internet from my laptop when I'm away from home. Since upgrading the firmware I cannot connect through 1 touch access or direct through dial up.
When attempting to connect through 1 touch I get as far as connecting device and then I get the message "Failed to connect device".
I have removed the modem through internet properties and reinstalled PC Suite (after using PC suite cleaner). I am running windows 7 but was connecting through 7 before the firmware upgrade.
Now I'm at a loss. Anyone got any ideas?

Saw another post here that said they make a completely new network with a different name and it worked. I decided to give it a try and it actually did work!!! Don't have any clue why but I don't really care since my network is running again.

Similar Messages

  • 7920 cannot register with AP after firmware upgrade

    We have a customer using 7920 with Firmware 1.08.
    He tries to test the Beta firmware (cmterm_7920_3.3.02_05_005.bin) on some 7920.
    The upgrade finished correctly and after reconfiguration, 7920 register to the APS.
    On two devices, he got a problem:
    - The configuration menu is hidden. We try to enter the sequence *## ‘send’ but without success.
    - The ‘reset’ with sequence *7#9#2#0#* is not working (it was working on other 7920 when locked by password)
    - USB parameter is hidden, so we cannot activate it.
    - We try to download an old firmware (cmterm_7920_3.3.01.03.bin) trough USB port, using the boot function after power on, but we got the message: ERR304-Memory insufficient to upload the firmware image.
    - We try to use an AP with basic configuration, broadcasting SSID cisco or tsunami, but 7920 stay with the message ‘No AP found’.
    So, these two 7920 are unusable now.
    Have you any suggestion? Daniel Bill

    First off 02-05-005 is not a 7920 image. He may be using 02-01-XXX, which is an engineering image and shouldn't be used in production. Can try Menu->*##->Send then config menus will be unhidden.
    Also *7#9#2#0#*, will just factory default the phone if phone lock is enabled, where you are prompted for a password at power on.
    Are you saying the phone will not boot now? If so, then call TAC. If they can boot, you can enter admin secret to expose hidden menus and enable usb to upload the firmware via USB or either configure the 802.11b paramaters to upload via TFTP wirelessly.

  • T410i SSD user and master password problem after firmware upgrade

    Hello.
    I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
    Previous firmware version: 1.3
    Current firmware version: 1.3.3
    SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

    My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
    You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

  • PC-Suite sync fails after Firmware upgrade of E65

    After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
    - PC-Suite updated to 7.0.9.2
    - Outlook 2003
    - XP Prof.
    Any ideas?
    Solved!
    Go to Solution.

    The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
    Does somebody has an idea?

  • Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition

    Hi.
    I had PhotoShop CS6 trial, which expired.
    I have purchased Creative Cloud student edition, I receive a message that my PhotoShop trial has expired.
    I am prompted to purchase the product to extend it, or type in the product's serial number
    (I never received a serial number.)
    I paid for Creative Cloud and have an order number, I should not be having this issue. 
    I have uninstalled and reinstalled PhotoShop CS6 multiple times, I also use DreamWeaver and am fearful that I will encounter the same issue. How can I use the Photoshop CS6 after I have paid for it?
    Curonda in Milwaukee, WI.

    Hi.
    The trial expired 2 weeks ago - Monday.
    I purchased the Cloud Yesterday, also 2 weeks ago Monday 10/15/2012.
    I purchased it twice thinking 1 purchase did not complete.
    I still will need to request a refund for 1, I've been too busy between, work, school, and kid. I'm at work now.
    Miss Curonda
    ...Remember, happiness is not a mood its a decision.
    Date: Thu, 25 Oct 2012 05:59:51 -0600
    From: [email protected]
    To: [email protected]
    Subject: Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition
    Re: Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition created by Nikhil Bisne in Trial Download & Install FAQ - View the full discussion
    Curonda,
    Can you let us know the date when your trial expired and when you bought the Creative Cloud Subscription?
    Thanks
    Nikhil
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4799512#4799512
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4799512#4799512
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4799512#4799512. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Trial Download & Install FAQ by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Cannot use photoshop cs6 after trial expired, even after purchasing creative cloud

    cannot use photoshop cs6 after trial expired, even after purchasing creative cloud

    Hi Rshmaine,
    please follow the steps provided on the link mentioned below and let us know if that resolved the issue or not .
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Kartikay Sharma

  • I m using window vista32 after itunes upgrade.. itunes crash .. Problem signature:

    i m using window vista32 after itunes upgrade.. itunes crash ..
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          iTunes.exe
      Application Version:          11.1.4.62
      Application Timestamp:          52ddbf7a
      Fault Module Name:          ntdll.dll
      Fault Module Version:          6.0.6000.16386
      Fault Module Timestamp:          4549bdc9
      Exception Code:          c0000005
      Exception Offset:          00062086
      OS Version:          6.0.6000.2.0.0.768.3
      Locale ID:          16393
      Additional Information 1:          a183
      Additional Information 2:          96f68295953afa2675d1551e001cfa2f
      Additional Information 3:          5630
      Additional Information 4:          5482da5e28e2dc79b1d40bd90d8c9b

    Hello there, jasibrar.
    The following Knowledge Base article offers up some great steps for troubleshooting your issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    This additional article may prove useful to you as well:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Cannot use face time after upgrating to ios 6 .password is not recognisible.pls help urgently

    I cannot use face time after updating to IOS 6'password  is not recognisible here nor to imessage pls help urgently

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • I cannot download sny apps after i upgrade to IOS6 ,message keep telling me ' Your session has timed out. Try again. I need help ����

    cannot download sny apps after i upgrade to IOS6 ,message keep telling me ' Your session has timed out. Try again. I need help  

    From Apple Support...
    Here are troubleshooting steps that should help you fix the problem.
    1) Quit App Store in multi-tasking.
    2) Tap Settings.
    3) Tap Safari.
    4) Tap Clear History.
    5) Tap the Clear History button.
    6) Tap Clear Cookies and Data.
    7) Tap the Clear Cookies and Data button.
    Try purchasing an app again from the device to get the security question prompt. You really need to set up the security question.
    ...it seems to have worked for me.....

  • Crippled 192.168.1.1 page after firmware upgrade

    hi,
    i recently upgraded the firmware of my WRT160N V2 to 2.0.03.
    but since then when i login i get a crippled page on 192.168.1.1 with not even a menu. so i cant even downgrade. is there something i can do?

    It is good to know that the issue is resolved
    After firmware upgrade it is always recommended to reset and reconfigure the router and I think that is why you were unable to see the menu on the setup page of your router.

  • Safari keeps printing that I cannot use it to get and upgrade for OX 10.9.3

    Safari keeps printing that I cannot use it to get and upgrade OX 10.9.3?
    Yet nothing but Safari shows up on the upper left hand "Safari" word just next to an Apple logo.
    I have no way to do anything else as nothing else has or will come up on my screen.
    Just getting here involved a great deal of flickering of any images on each screen.
    What can I do next?
    Or what can you do to help my iMac upgrade to OX Mavericks or better?

    First, save and close any active documents, then all active applications you have started. If Safari will not close, find "Force Quit" under your Apple menu and close Safari that way.
    Now restart the computer.See if Safari is behaving.
    I just joined this community because Aplle screen demanded I show some group.
    Have no idea what that means either! These forums have been wacky since a major format change (I can;t call it and upgrade) about three weeks ago. You posted just fine--we can work with that.
    Another thought. Navigate this path: Macintosh HD > Applications. Find Safari and highlight it (single-click). Now press teh SPACE bar. What does it show for your version of Safari? If is says version 7.1, that is another issue we need to address.

  • Cannot use internal microphone after upgrading Win 10 Home 64bit

    After upgrading from Windows 7 Home Premium 64 bit to Windows 10 Home 64 bit on my laptop HP 1000 Notebook PC, Windows cannot hear the internal microphone, I think the mic signal is too small. I cannot use Cortana, Skype chat or Hangout. Windows says that the recording driver is still available and connected but there's no recording signal. I already uninstall and reinstall driver from Realtek and HP website  but no effect. Also I used Windows Troubleshooting and HP Support Assistant but it is still not normal.Some one can help me to solve this problem. I really want to use all the function of Cortana.

    Thank you very much for your attention! I checked the BIOS, my Production number: C9M71PA#UUF, HP 1000 Notebook. Also, when I tested with 1 external microphone (run normally with other computer), my latop can recognized the sound and I can use the Cortana, but I have to maximize the the Microphone Boost.I guess that windows driver lower the voice sound too much; because when I followed the instruction get started calibrating the microphone in the thread dv7t-7200: Microphone not compatible with Windows 10, it had improvement but not too much. Please help me to deal with this problem. Thank you again.

  • BEFW11S4 constant disconnect after firmware upgrade

    I was having trouble with my router losing connection every 2 hours or so . I have downloaded and installed the latest firmware and now it keeps disconnecting almost every 30 min. I have a static IP on my main pc and dhcp enabled for my xbox360. I have checked the cables if they were bad by swapping them but the problem was still there. Any help would be very much appreciated.

    After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch.  If you saved a router configuration file, DO NOT use it.
    Also, please list all the static LAN IP addresses that you are using on your network.
    If you are not using the default DHCP server range of 192.168.1.100  thru  192.168.1.149 , then please state your DHCP server range.
    Are you running any peer-to-peer (P2P) software?  If so, this is a known cause for router slow downs and disconnections.  Temporarily stop using the P2P software, then reboot router, and see if this corrects your problem.
    Who is your ISP?  Are you on a cable system?  Some cable systems monitor the MAC address of the devices connected to them, and eventually boot off any MAC address they don't recognize.  If you are on a cable modem, try cloning your MAC address (done in the router), and see if this corrects the problem.

  • Linksys SRW224G4 Fail After Firmware upgrade

    Hello Everyone,
    I am a newbie in this forum, so please excuse me If I may not make all things right.
    I have a serious problem with my Linksys SRW224G4 managed switch.
    After the one and only time that I have tried to update its Firmware, a couple of weeks ago,
    although that the firmware upgrade ended with a success, When I tried to reboot the switch
    the device went broken. Now it does not recieve an IP from the DHCP, hence I cannot see it in a list
    with the IP scanner.
    I have read and followed the manual, in order to be able to connect to the switch with Hyper Terminal
    via an RS232 serial port cable and managed to reach up to the following screenshot.

    It's not unrecoverable. It just looks like the existing image didn't take and the boot process wants you to load a new one over the serial link. You're using HyperTerminal, so you already have what's necessary to load the image.
    As soon as the switch indicates that it's downloading code using XMODEM, select the file transfer option in the HyperTerminal menu and upload the "SRW2xxG4_FW_1.2.3.0.ros" file using XMODEM. It will take awhile, but should recover the switch.
    Also, make absolutely sure that you're using an SRW224G4 revision 1.1. If you upload the firmware from the 1.0 firmware, this sort of thing will happen.
    If you happen to have a revision 1.0 switch, you can still recover it via XMODEM, but use the "fesm-12216.ros" firmware instead.

  • No contacs after firmware upgrade on N70

    Hi
    I did a firmware upgrade yesterday on my N70 using NSU. Of course I did a backup using the uptodate Nokia PC suite. After the firmware upgrade I saved the data back to the phone aagin using the Nokia PC suite. Everything looks good except that no contacts are there.
    I did the upgrade again just to make sure that everything went OK with the same result.
    Can some help or has the same problem?
    Firmware V 5.0638.3.0.1 18-09-06 RM-84
    PC Windows XP SP2
    Nokia PC Suite 6.82.22.0
    NSU 1.2.0en
    Best regards
    Chris

    not sure about your PC Suite version but this has been well documented in these forums and I had the same problem and with N70. I think it was mentioned as a PC Suite issue, or a combined PC Suite issue N70 issue with many people reporting it. Anyway nothing you can do but enter your contacts or transfer from another phone

Maybe you are looking for