N97 cant connect to internet after firmware update

Let me start by saying that I've always been a loyal nokia supporter until the n97.
from the first day out of the box it has given me nothing but trouble!!! and i think that Nokia made a lot of mistakes with this "flagship phone"
But on to a more recent problem I've been having. i updated my firmware (via computer) to firmware v20.0.0.19 unfortunately I've completly lost the ability to go online through any form (3g /wifi) I've done everything i could think of (soft reset, hard reset) but nothing helps. I've read many threads who appear to have the same problem, only nobody has found a full prove solution (as far as i can see)
please prove me wrong. I'm at the point where it annoys me so much that i want to trow the phone out of a 5 story window

hi, sorry you're having problems, it may seem obvious but have you tried deleting all your internet access points, and then adding new access point ? May help, also I'm sure I saw another post with a similar issue also on 3, maybe worth contacting them as they are renound for tightly controling there branded phones and may be able to send you some new settings.
Hope you get it sorted it's a great phone once it's running right, and mine is on V2.1.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Cant connect to internet after ios6 update

cant connect to internet after ios6 update

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can't connect to internet after firmware update?

well last night i did a firmware update and now i can't connect to my network at home. i have a server running dhcp. so i gave the extreme a static ip in the range. dns and router ip are set to the servers ip. this all was working fine till last night. what am i doing wrong? i can't even log onto the server from my MBP. the APE is connected directly by ethernet to the server.
thanks

HI and welcome......
On your iPad...
Tap Settings / General / Reset / Reset Network Settings.
That resets to factory default. You may be prompted for your network password.
Hope that helps...
Carolyn

I cannot connect to internet after I update system.

Hi,
I update my system a few day ago (use systemd to replace rc.d) and I cannot connect internet. I guess my router table is broken, but I cannot find any problem.
I use ping to try some IP. And I find I connect to local machine only.
Do I miss some configuration ?
[~]ping -c 3 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2000ms
[~]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.13.254 0.0.0.0 UG 204 0 0 eth2
10.10.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.27.12.0 0.0.0.0 255.255.254.0 U 204 0 0 eth2
[ ~]$ ping 172.27.13.254
PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
--- 172.27.13.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
[ ~]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.13.254 0.0.0.0 UG 204 0 0 eth2
10.10.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.27.12.0 0.0.0.0 255.255.254.0 U 204 0 0 eth2
[~]$ ping 172.27.13.254
PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
--- 172.27.13.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
--- 172.27.13.254 ping statistics ---
41 packets transmitted, 0 received, 100% packet loss, time 40131ms

Hi,
I have 2 network interface.
The eth1 is for test only. It is connected to a 8 port LAN switch, and there are 2 NAS connected to this switch.
I use eth2 to connect to internet, for example, update system. I try to disable eth1, but it is still not work.
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
inet 10.10.12.50/24 brd 10.10.12.255 scope global eth1
inet6 fe80::2e0:81ff:fe27:3261/64 scope link
valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
inet 172.27.12.23/23 brd 172.27.13.255 scope global eth2
inet6 fe80::207:e9ff:fe01:a136/64 scope link
valid_lft forever preferred_lft forever
ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
link/ether 00:e0:81:27:32:60 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
Last edited by guardkuo (2012-12-22 10:52:35)

Lost Internet after firmware update!

I have use this router some years, and I have no problem, then I have made an Firmware update, and now sometimes I have lost internet, not connection but only Internet. Can I get a default firmware or where is problem?

I have also had problems connecting to the internet
I upgraded my WRT54G version 2 router's firmware to 4.21.1 last week, taking the opportunity to upgrade after the area I live in suffered a temporary power cut, which somehow caused my router settings to reset, even though the router was not switched on at the time.
Since upgrading I can connect wirelessly to the router, but I cannot access the internet via wireless. I am using exactly the same settings as I did before the upgrade and also made a backup of these settings after the upgrade, but every day I attempt to connect wirelessly I lose my net access again (but by restoring the backup settings - the very same settings already held by the router - I regain my net access, but then the next day I have to repeat the whole process.
Yesterday I tried disabling the wireless security, which allowed me to access the net again, but soon as the security is re-enabled, the problem reoccurs.
I have a laptop, a desktop and 2 PS3s connecting wirelessly via the router and have had no problem with any of them until this upgrade. I have just reapplied my wireless settings & will try again tomorrow and will attempt using a wired connection and post an update as soon as i'm done.

IPhone 3gs cant connect to internet after OS4

Ever since i updated to OS4, i cant connect to the internet except at wi-fi hotspots. i reset all settings, restored the iphone, tried airplane mode on and off and nothing has worked. any suggestions?

I had the same problem that AT&T couldn't solve after my iOS4 Upgrade on my 3gs.
An Apple Tech double checked that airplane mode was off and then went to settings, restore network settings thru the phone's menu. It reset and suddenly all my 3g cellular connection was restored and everything worked again. But V E R Y S L O W L Y!
I am still getting 4-5 bars of connectivity, my all my speed tests show my 3g data connect at about 60-120 kbps or even slower. I don't know of it's an iOS4 bug or AT&T just overwhelmed by al the new Iphones added to it's network. I'm paying for "Unlimited Data" that now comes in so slowly, some of my apps "freeze" and time out when they can't connect.
And I have no official way of downgrading to 3.1.3 without hacking my phone...which can't be discussed here and may not even really work!

Intel Mini has problem with Mail/internet after firmware update (0.1)

Hello there.
I'm not sure, but I think my Intel Mini has gone bonkers after a firmware update (Mac mini-SMC-firmware-updater (1.0)
What happend is, that connecting to (both of) my two Gmail and Tiscali accounts is not working anymore. (no connection through gate 995)
I did not change anything in the accountsetup.
But now I notice that even my torrents (oops) can't connect anymore.
I think this all took place after the firmware update.
On Dutch sites I do not seem to get any useable answers, so I thought it be wise to go a bit more international.
Could anyone help me out on this one?
Cheers.
Marco

Wizzard,
Having the same problem here. After updating the firmware the wireless connection to the network is unstable. After rebooting the laptop most of the time I get "Low or no connectivity" message. Sometimes it connects and dies after a few minutes. And sometimes it connects and stays connected until shut down.
What do you mean by "u have to reset it for 30 seconds and then reconfigure it"? Do you mean you actually have to reset the router to default settings and reconfigure, or just power down and bring it back up?
Thanks,
Stas

HT4623 My iPad is not connecting to internet after software update what can i do

Hi everyone I just update the software 7.0.4 on my iPad 2 and after doing that cannot connect to internet, can somebody tell me
what to do to correct this issue? Please

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.
If yes you can try resetting your Network Settings. Settings > General > Reset > Reset Network Settings. Note that you will have to re-enter all of your WiFI passwords.

Can't connect to Airport after firmware update

Ever since I updated the firmware on my Airport I can't connect to it any more. I'm pretty sure I installed everything properly and reset the Airport several times but still no luck in connecting to it. Any suggestions?

DomPoggi wrote:The Airport Utility said firmware on each Airport Express needs to be updated, so I did it.
Dom
Firmware updates on the Express sometimes results in scrumbled settings.
Check that WiFi is disabled on your MacBook.
Then connect (preferabely with a LAN-Cable) the MacBook to the Express.
Open Airport Utility on the Mac and switch to the Express.
Use the wizzard to set up the Express from scratch or use manual setting zu check the settings.
Lupunus

Cant connect to wifi after ios6 update

The IOS6 update seemed to go well, but I cant connect to my wifi on my 4S. The seems as if it is connecting the redirects to an apple.com log in page that says:
Hmm the page you are looking for cant be found..
Im seeing the same issue with peoples ipads.

The IOS6 update seemed to go well, but I cant connect to my wifi on my 4S. The seems as if it is connecting the redirects to an apple.com log in page that says:
Hmm the page you are looking for cant be found..
Im seeing the same issue with peoples ipads.

Cant connect to internet after latest security update

Hi
After taking the latest security dowload for Panther my airport extreme can't reach the internet. I had a similar problem a while ago when an airport update seemed to discriminate against my 'X-Modem'. Is there a conflict in this latest security update.
DS

Does your Airport Status show you are connected to an Airport Menu ?
Are you able to connect to the X-Modem administration interface on http://10.0.0.2 and run the diagnostics ?

Ipad 2 apps cant connect to internet after 7.0.6 update

Hi there can anyone help.
Im using an IPad 2 with wi-fi only and ever since the 7.0.6 update was available, none of my apps seem to connect to the internet (it has been like this as soon as the update became available, both before and after installing).
The browsers seem to work fine, but apps such as facebook, amazon and even the appstore come back with "cannot connect" or "network error"
Anyone have a fix for this?
Thanks!

I just did this network settings reset, but my problem is persistent. My iPhone 5 connected to my Airport Extreme perfectly for a long time, then starting about 3 or 4 weeks ago it will not connect. I have several other iPhone, iPads, Apple TVs and Macs in the household which all connect fine, but for some reason my phone will no longer connect, using all the same settings and login credentials.
When I enter the wireless network password, it seems to accept the password, but never actually connects. The little windmill icon just runs and runs, never resolving. It has been this way for weeks now, but only at home, I have no trouble connecting at the coffee shop, airport, or friend's houses. What's even more strange is that the iphone appears to be receiving an IP address from the router, it just will not communicate internet data.
If anyone has had any luck resolving this problem, your help would be much appreciated.

Can't connect to WRT54G after firmware update

I just tried to update the firmware on my WRT54G (version 8.0) and have not been able to connect to the router since then. The firmware said that it had been updated successfully, however I have been unable to connect since it reset itself, and the Ethernet and Internet LEDs are all constantly on even though nothing is connected (the power light on the other hand is behaving normally, not blinking or anything). I have tried resetting the router by holding down the reset button for 30 seconds, but this does not change anything, the router still cannot even be pinged. If anyone can give me any help at all with this, it will be very much appriciated. Thanks.

It sounds like the router might already be dead. But there is always hope that you might be able to revive it.
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

Time capsule not connecting to internet after firmware 7.6.4 upgrade

Hi,
I wonder if anyone can help me, I updated my 4th gen time capsule to the latest firmware yesterday and post the update my TC was telling me that there was no internet or DNS.
After tralling the internet (using my iPhone and 3G) I eventually did a hard rest of my TC, put all my PPoE details in, wireless network details in and still I got the same error messages on the TC.
Thinking that this could be a PPoE error I plugged an old router in, did the PPoE setting and the internet is working just fine, which leads me to beleive that this is purely a firmware issue on the TC post my upgrade to 7.6.4.
I then decided to downgrade to a previous firmware however this seems to be impossible on my TC using airport utility. I dont have the drop down menu in my airport utility aplication to do a dowgrade, infact these is no option button at all (so I cant hold it down as suggested in other posts).
I am currently running OSX 10.8.5 Mountain Lion), Airport Utility 6.3.1, TC 7.6.4.
If anyone can help me resolve this issue or tell me how to downgrade the software I would be extremly gratefull! Also note I am not a techie at all, just learnt what a PPoE was!!!
Thank you.

Please do a factory reset.. it is more complete than hard reset.
The Factory Reset TC Gen1-4. Or AE Gen1-5
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
In the airport utility.. plug it in by ethernet..
Make sure ipv6 is set to link-local in both wireless and ethernet on the computer.
Then simply hold down the option key whilst you click on version.. downgrade to 7.6.1 as the last two firmware are hopeless.

Itunes store cant connect to internet after i installed itunes 9

i recently installed intunes 9 and after that i cant get onto the store... i can get onto the internet but just not on itunes. i have done everything that the help thingy said to do.....please help me!

If you get it "frequently" that tells me that it does connect for you some time. Maybe one of these things will help. I have had the issue a few times and the thing that works for me is signing in and out of my account. YMMV.
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again.

N97 cant connect to internet after firmware update

Similar Messages

Maybe you are looking for