N97 Charging Funny Problem + Headset Issues

I have been experiencing a funny problem when charging my N97. I bought my phone in August last year. It had been working fine till now and still is. I really have no complaints when it is concerned to performance and usablity. Initial issues were promptly solved with the firmware updates.
Yesterday night, I found out that I had this problem. When I hooked up my phone with my charger, it did not show any light. I tried to use the charger on another mobile(SAMSUNG) which sports the same USB port as my N97 and it worked ! I also used the samsung charger (though its only 700mA) on my N97 and the charging indicator glowed ! To my surprise, the charger adapter pin that ships with the N97 allowing us to charge the phone with older chargers also allowed me to charge my phone. In short, everything charged my phone(including USB) except the provided charger. Any help regarding this matter will be deeply appreciated.
Secondly, of lately the headset has become dogdy. Earlier, even if I ran while having hooked up, the connection was good. Now, even if I move the slightest, the phone looses the connection with the headset and the headset icon disappears. Then I need to plug it out and the plug it in again for about 2-3 times to get the icon to reappear. Now if anyone can explain to me why this is happening and the solution to it, I would be really happy.
Thanks !

3 days but still no response. Anyways, I had my device taken to the local Nokia Care Outlet. It appears as though it was some hardware issue and I shall have my handset repaired in about a week. Since the warranty is still active, no problems what-so-ever.
Thanks for OR whatever ! Expected better from this forum....

Similar Messages

N97 Charging Battery Problem

Had my N97 two days, first time i gave my battery a full charge with the mains charger it worked fine but now when ever i connect the mains charger my N97 wont charge it just keeps flashing with the message: unplug charger from power supply to save energy, even when my battery is low i get this problem and even if i switch my phone off it still wont charge with the mains charger but strange thing is i can charge my N97 no problem with usb cable from my pc but i cant always be near a pc to charge my battery so really need it to charge by mains how can i fix this problem? my firmware is V 10.0.012 Type RM-505
Message Edited by becky_ on 03-Jul-2009 11:35 PM

ichapman wrote:
Ah...so it's not just me then.
Put the unit onto charge Thursday night and didn't really check what the battery looked like when I unplugged it Friday morning, but was very surprised to have gotten to 4pm and the unit announced Battery Low and then shortly switched itself off.
As a result put it on charge again Friday evening, just a moment ago unplug it to find that the battery is only charged to 2 bars.
Like most, can't see if the new firmware addresses the issue as it's not been released for my carrier branded handset model.
Iain
Message Edited by ichapman on 04-Jul-2009 10:50 AM
Me too, is it a faulty phone? does anyone experience the same problem beside ichapman? Please share ur experience
Please look at my recorded video n97 charging
http://www.youtube.com/watch?v=iZ8d_gHSrt0 -> N97 charged full indicator at 2 bar
http://www.youtube.com/watch?v=5rzVyxLFPN0 -> N97 power up when charger still plug, still show indicator 2 bar
http://www.youtube.com/watch?v=aT0LjXvs40w -> N97 charger unplug n plug again,showing message "charging complete" but the indicator still at 2 bar
The next day I took it to Nokia care point, they reflash the firmware n the same thing happen again
N97 Black n E71 Red
Indonesia Nokia ESeries Forum (eseries.commoe.com)

Battery charging and power adaptor issues

I'm having slight issues with both my power adaptor and the battery itself.
First I think I have cord issues as the light status can change from dim green to red or bright green if I move the cord around.
Second, my MBP is having trouble recognising if power is going to the battery or if it's charging etc. It can recognise if there's no adaptor connected at all, but if there's an adaptor connected, it has trouble seeing if there's power coming from the adaptor even if the light is on. I.e. it can stay at 100% and supply comes from the power adaptor and then suddenly drop to 80% power and start charging agan. One issue that happened earlier today was the adaptor was connected, and the battery indicator was at 100% with supply from the adaptor. Suddenly the MBP shutdown, and when I rebooted it was at 17% (I've tried repeating that in case of a dodgy battery but I couldn't)
System profiler Power information: (MPB is 18 month old)
Battery Information:
Model Information:
Manufacturer: SMP
Device name: ASMB012
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 4779
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4876
Health Information:
Cycle count: 111
Condition: Normal
Battery Installed: Yes
Amperage (mA): 285
Voltage (mV): 12603
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 0
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: No
Battery Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 0
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00527d2c
Charging: Yes

Try an SMC reset.
http://support.apple.com/kb/HT3964
If that doesn't help, the problem could be the adapter, the battery, or the I/O board (or a couple of less likely things). If you can borrow another adapter and/or battery, try them to see where the problem is. Or, if you're near an Apple Store, take it in and they'll diagnose it for you (for free, but they will charge for repairs if you need them and don't have AppleCare).

Curve 8330 Stereo Headset Issue.

Hello, I purchases a new Curve 8330 a few days ago and the headset which was included with it (the 3.5mm 4 Pole Stereo Headset) does not work when I play music from the Internet or from the Media. It also doesn't work with any calls. The volume always comes out of the speaker in the phone, not the headphones. Is the headset exclusively for Bluetooth use? My iPod headphones work on my Curve and the Curve headphones work with my iPod, so I'm confused.
I read the previous posts related to headset issues and I couldn't find an answer to this. Thank you!

I'm having a similar problem... my blackberry headset does not work properly. I mean.. it was working when I first got it-- and then all of a sudden, it stopped. It was cold outside, and I never really thought about it again. I was frustrated... and about a week ago I called tech support to inquire...
They siad my blacberry headset jack was most likely damaged, as:
My boyfriend also has a blackberry, and I had the same problem with his out-of-box blackberry headset. (It would work, and then not work unless I pulled it out of the jack slightly).
Regular headphones I use with my ipod worked just fine in my blackberry (curve, by the way).
My headset worked in a sales associate phone when I took it into the store. Granted... my store doesn't fix blackberries-- they just have you send them in.
Luckily... I'm under warently. I wish I weren't so in love with this phone... it seems to be really fragile. My last one was coming apart at the seams in the back around the battery come day 2....
... wait until you try to upgrade your phone's software...... whew. It's rough.
--- ps. it's working plugged in right now and i'm indoors...

I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde

Can't charge Apple BT headset through iPhone 3G Dock?

Is this correct? I plugged the BT charging cable into the Apple iPhone 3G dock. I put the iPhone in the dock to charge, and the headset in its charging port, and left it overnight. This morning I noticed the headset had lost charging!
Then I just plugged the cable into the iPhone and it charges. If that is the case, what a waste to have bought the dock.
Also will the headset charge from the cable if not plugged into the phone?
Thanks!

It looks like simply connecting the cable to the dock stops the headset from charging. I verified this by plugging in the headset, and seeing the charge light appear. I then grabbed the dock without the phone in it, and plugged it in. Headset light turned off shortly after.
Really disappointing that there is no dock solution for the headset and the 3g iPhone. I discovered this after hooking up the cable to the dock and thinking it was working, only to find my headset battery was completely drained.

Where can i buy the charging cord for headset?

i got my cords all mixed up and cant find the charging cord for headset. where or how do i find a new one?

Visit your local Apple Store...

N97 Wi-Fi Problems

I have just received my N97, and was wondering if anybody would kindly help with the following problem:
My N97 connects, no problem, to my home network, using wi-fi, however, if i attempt to open, any of the pre-installed apps ( i-player, Facebook etc) the N97 automatically attempts to connect via gprs.
I cannot find any settings, that allow me to change the app settings.
Please help.
Thanks.

Check this out.
Under Connectivity you will find a folder named "Destinations" where you will be able to setup multiple access points under one connections point. i.e mine defaults to a Connection point named "Internet" where I have 3 access points
WLAN
Orange Internet
Orange Java
I have prioritized em in that order so when my WLAN is out of range the phone should automatically search for the next priority access point in this case Orange Internet and if that ain't available then it should search for and connect to Orange Java.
After you set this up make make it your default access point for your browser and every other app that allows you to define an access point.
Hope this helps I'd advise you to download the User guide and read the whole "Connectivity" Chapter to fully understand this.
you can it here
http://europe.nokia.com/get-support-and-software/product-support/n97/guides
Hit Kudos if I Helped out.
Nokia 3310-> 8810->N95->N95 8Gb->
Nokia N97 Black v21.0.045 RM-505 Code-0585162 (handset No 3)

Problem in Issues/message table problem in RMMAIN

Hello ,
I have a problem in Issues/messages table in tx RMMAIN
Problem:When i click on create "Issue" tab in RMMAIN,issue tab is disabled.
Please let me know what i have to do?
Regards,
Neni

Hi,
Is this problem with a roadmap assigned with a project or a roadmap not yet assigned with a project?
If this roadmap is assigned with a project, then:
1. Go to tcode: SOLAR_PROJECT_ADMIN->select the project to which this roadmap is assigned.
2. Go to tab->Project Standards->Select the tab "TABS".
3. Check the visibility of the tab "Issues/Messages". It should be "Visible".
If still the problem persists, then check whether you have this SAP_RMMAIN_EXE authorization.
Check also that you have activated BC sets for service desk.
SOLMAN40_SDESK_BASICFUNC_000
SOLMAN40_SDESK_TPI_ACT_AST_001
SOLMAN40_SDESK_ACTIONLOG_001
SOLMAN40_SDESK_ACT_ADVCLOSE_001
SOLMAN40_SDESK_TEXTTYPES_001
Let me know if this not solved your issue.
Regards,
Sanjai

Funny Problem with method GET_GROUPED_COLUMNS

Hi All,
I am encountering a funny problem. I need to provide all Grouped Columns of my Web Dynpro Table. I used the following coding to do this:
lt_col_grp = lo_table->get_grouped_columns( ).
Now, for one table this methode return all Grouped Columns and for another table it returns not only the Grouped Columns, but also the NON Grouped Columns!!!
In the debugger this looks as follows:
1     *->{O:1752*\CLASS=CL_WD_TABLE_COLUMN}*
2     ->{O:1755*\CLASS=CL_WD_TABLE_COLUMN_GROUP}
3     ->{O:1757*\CLASS=CL_WD_TABLE_COLUMN_GROUP}
4     ->{O:1759*\CLASS=CL_WD_TABLE_COLUMN_GROUP}
5     ->{O:1761*\CLASS=CL_WD_TABLE_COLUMN_GROUP}
6     ->{O:1763*\CLASS=CL_WD_TABLE_COLUMN_GROUP}
7     ->{O:1765*\CLASS=CL_WD_TABLE_COLUMN_GROUP}
Why is that??
Does anybody know how to delete the lines that are not of type CL_WD_TABLE_COLUMN_GROUP?
Thanks,
Johannes

Hi Maik
It seems you have solved your problem. There are some actions clearing all selection and scrolling info. And since you every time create a new instance or call some method which clears your selections your selections table is lost.
For a screen session, you should use "set_table_for_first_display" for just once and for next PBO triggers you should execute the method "refresh_table_display".
*--Serdar

Funny problem with the mapping

Dear All,
I am facing with a funny problem with the mapping.
I am working on a scenario in which Invoice IDOC created in R/3 will be posted to XI and then in XI, mapping are done to create an XML file out of that IDOC.
In the Idoc, there is a segment E1EDKA1 which is getting created multiple times for different partners alongwith their details. The fields in E1EDKA1 segment are: PARVW,PARTN LIFNR etc.
In the output I just want LIFNR number where PARVW = RE or RS.
I have done the required mapping and when I am testing the mapping its giving me the required results correctly but when I make this scenario live then in real-time, the output XML file has no value for LIFNR.
Can anybody guide me out why is it happening tht during mapping testing its giving the correct result but at real time the mapping is returing no value.
Warm Regards,
N.Jain

Hi Nishant,
Are you sure the test data which you are using while testing the mapping in IR and the one which comes when you test real time is the same?
The data which comes real time. Copy the source payload and then test in mapping. See if you get the right data which you expect. If you do then theres some problem.
Now also go to the same message and in trace you can find out the GUID of the mapping program which is used.
Go to RWB - Last button..not sure what the name is .. something similar to Cache.. Find your mapping program and see if the GUID Matches. If the GUID matches then it is okay.
Also try to do the following..
Reactive the MM/IM.
Go to ID. Make some dummy change in Interface determination and then activate it.
Check the cache notification to make sure if the cache is updated.
If the above doesnt help you let us know.
Regards,
Sumit

What kind of real time problems and issues arise in Data Modelling

Hellooo experts,
I am not a BW expertise, so just want to gather some knowledge on Problems and issues related to DATA MODELLING, if any body have a document or a link can you please snd it to [email protected] or reply to this post. I promise to reward you for proper answers hope this is the way i say thanks for your help.
kishore

hi kishore,
The first and most important problem is to understand Clients requirement. Clients even some time not aware of how to utilize efficiency of BW, as they are very much use to with traditional SAP R/3 reporting. So most of time we have to suggest options to client.
If we come to technical aspect, than identifying Key Figures and Characterstics is the most important task. And how you map that to available infoobjects. Attributes also plays major roles, like which attributes is better to use as navigational one and which as exclusive attribute.
Their is long list for data modelling issues, its better you refer either Mastering BIW book by Mac'Donalds. And SAP Help Library is also having good material.
regards,
kamaljeet

Ipad 2 charger having problem intermittently

Hi there, I got my iPad 2 last week. First day I could charge without problem, after few days I failed to charge it. I could hear the charging sound, but it will not charge after 5 second. I unplugged n plug in few times, went to apple store, they do not want to replace the charger for me as it can charge in front of them in the shop. Last night, I got the same problem again, this time no charging sound and didn't charge no matter how many times tried it. After an hour, it could charge again. It really ****** me off.. Do u all have the same problem? What can I do.. :'(

It says it's not charging, but if you switch the screen off, apparently it will.
Can't you just fully charge in the wall and then plug into the Mac?

Charge IPAD problem

I have kept the I PAD 3 into charger for three hours , I came back to see, if the battery Status, I found the percentage is 4% only.

Are you using the iPad wall charger?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

N97 CHARGING PROBLEM

when i put my n97 in charge the charging light comes on like usual however after a while the screen turns all white and the nokia sign also comes up like usual but then it only shows one charging symbol and when i press the switch on button the screen goes completely black with the nokia sign still there and then the nokia sign goes away as well.
my phone just doesnt charge and i have also tried it with a usb to charge but i get the same problem.

It is looks like hardware issue! And my opinion if you still have warranty you should will go to care center! I will be do it if be i have this problem. Try also will do hard reset.

N97 Charging Funny Problem + Headset Issues

Similar Messages

Maybe you are looking for