N97, dont know how to set up 2 things !?!

I hope somebody can help me out. I did not find anything usefull till now. (maby i had wrong search words?)
First problem : 
When i connect USB to my PC, it beginns to charge. Can this be stopped somehow ? Or does this nothing to the battery ? I thought to many charging is killing the battery ?
Second thing : Is there a way to get the realplayer in a total Fullscreen ? I have black borders on the left and right.
regards OptX
Solved!
Go to Solution.

This is nonsense about the battery.
Nickel-based batteries (NiCd and NiMH), which are a thing of the past as far as phones are concerned, did not like to be over-charged and had to be fully depleted before being fully recharged again in order to avoid memory effect.
Phones for the past 5 years or so have always had lithium-based batteries (li-ion or li-polymer), which is a totally different technology that needs to be cared for in a totally different way. Like nickel batteries, you have to charge lithium batteries fully and deplete them fully a few times for the battery to reach optimum capacity. However, once that "running in" period is over, lithium batteries like being charged as much as you can and can even be damaged by fully depleting them too often. Furthermore it is impossible to over-charge them, even if you leave the charger connected 24/7, because the electronics inside the phone shut the charging current off once the battery is full.
As for getting realplayer full-screen, if you have a 4:3 aspect ratio picture on-screen on a 16:9 aspect ratio screen then there will inevitably be black on the sides unless you either deform the picture or just zoom in and crop off the top and bottom.
Tap the screen during playback, then "Options" > "Change aspect ratio". You can choose between "natural", which leaves the picture as-is, "stretch", which will deform the picture to make it fill the screen, and "zoom", which will enlarge it so that it fits in the width but chops off the top and bottom.
Message Edited by grschinon on 17-Jul-2009 03:37 PM
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • I just got an ipad mini and I dont know how to set up an icloud email, please help?

    I just got an ipad mini and I dont know how to set up an icloud email. I know I have an icloud account but it is set up to my gmail. Can someone please help?

    Have a read here:
    http://support.apple.com/kb/ht4810

  • I downloaded a app an its for your background an i dont know how to set it

    i downloaded a app an its for your background an i dont know how to set it

    Contact the Developer of the App.

  • HT5312 I dont know how to set a rescue email!!!!!

    Who could tell me how to set a rescue email

    There are instructions on the page that you posted from :
    Navigate to appleid.apple.com using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
    Once you've finished editing your rescue email address, click the Save button directly below the email field.
    If you are asking because you've forgotten your security questions then you won't be able to add one until you've had the questions reset - in whic case see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

  • I dont know how to set a site setup and edit some ready html files

    how to set up a site in dreamweaver when using a WAMP SERVER and edit some html files

    Is it a PHP or ASP site or does it have SSI components?
    If not you don't need to seet up a server. You can preview pages offline in a browser window.
    If it IS a PHP, ASP or SSI site, you need to copy it (the site folder)  to your "www" folder of the WAMP folder and then define the site using the folder you placed in the "www" folder as the root.

  • How to make XML element used in RTF PRIVATE/PUBLIC ? I know how to hide columns in RTF, but dont know how to generate the xml in below way. Please help.

    Hi
    I am following below link to hide/show my columns dynamically. See "Column Formatting"
    http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187.pdf
    As per doc, element can be made private/public.
    <items type="PUBLIC">
    <item>
      <name>Plasma TV</name>
      <quantity>10</quantity>
      <price>4000</price>
    </item>
    <item>
    And same can be used to hide the column using condition
    <?if@column:/items/@type="PUBLIC"?>
    MY QUESTION IS HOW TO DO THIS IN MY XML BELOW?
    Below is part of my XML code which I am using in Data Definition for RTF.
    <group name="GH3" source="QH3">
    <element name="COLUMN_HEAD3" value="COLUMN_NAME" />
    </group>
    <group name="GH4" source="QH4">
    <element name="COLUMN_HEAD4" value="COLUMN_NAME" />
    </group>
    I am getting output like this.
    <LIST_GH3>
    <GH3>
    <COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3>
    </GH3>
    </LIST_GH3>
    <LIST_GH4>
    <GH4>
    <COLUMN_HEAD4>XYZ</COLUMN_HEAD4>
    </GH4>
    </LIST_GH4>
    In order to use logic as per oracle document I want output like this.
    <LIST_GH3 type="PUBLIC">
    <GH3>
    <COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3>
    </GH3>
    </LIST_GH3>
    <LIST_GH4 type="PRIVATE">
    <GH4>
    <COLUMN_HEAD4>BLANK</COLUMN_HEAD4>
    </GH4>
    </LIST_GH4>
    What changes I need to make in my XML code to get the runtime output as above? Please help. Where do i need to make changes in the above xml? Group name? Element name?
    I am planning to use below condition in RTF template to hide the column,  but dont know how to set the type of column as PRIVATE/PUBLIC in the XML output used to populate data in the RTF at runtime.
    <?if@column:/BTSPIEXP/LIST_GH3/@type=”PUBLIC”?>COLUMN_HEAD3<?end if?>
    Regards,
    Swapnil K.

    Hi,
    Issue has been resolved. I used the value of the element to determine to display it or not.
    Regards,
    Swapnil K.

  • HT1699 i dont know how to connect my new ipod touch to itunes to set it up

    i dont know how to connect my new ipod touch to itunes to set it up

    Look at the Users Guide:
    iPod touch User Guide (For iOS 5.0 Software)

  • How do i set up my kindle to receive audio books? Is there a MAC filter? it must be disabled and I dont know how to do this

    how do i set up my kindle to receive audio books? Is there a MAC filter? it must be disabled and I dont know how to do this

    By default, any type of MAC filtering is disabled on the AirPort base stations ... unless, of course, you or someone else enabled it.
    If it is enabled, to disable it, you would use the AirPort Utility.
    AirPort Utility > Select the AirPort > Manual Setup > AirPort > Access Control tab > MAC Address Access Control: Not Enabled

  • HT5312 I really need help. I forgot my security question answers and i dont remember them. I dont know how to get to this email thing and i dont remember if i ever set one up or not.. Please help quickly

    I forgot my security questions and i dont know how to get to the email rescue and don't think i ever set one up with my account.. Please help me !!!!

    The Three Best Alternatives for Security Questions and Rescue Mail
        1. Use Apple's Express Lane.
              Go to https://expresslane.apple.com ; click 'See all products and services' at the
              bottom of the page. In the next page click 'More Products and Services, then
              'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
              ID security questions' and click 'Continue'.
         2.  Call Apple Support in your country: Customer Service: Contact Apple support.
         3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • I bought an ipod shuffle 2nd gen a few years ago. tried setting it up got bored and never tried again. really wat to use it now but i dont know how. any help would be greatly appreciated!!

    I bought an ipod shuffle 2nd gen a few years back. i did try to set it up at the time but found it hard (i was young and impatient!!) got bored and never tried again. I really would love to start using it now, but i dont know how....please help!!!

    Hello emmalemonjuice,
    Why not take a look and make use of your iPod's User Guide?
    http://manuals.info.apple.com/en_US/iPod_shuffle_Features_Guide.pdf
    B-rock

  • How do i set up my 3g sim for my iPad? the sim is already activated but i dont know how to get it to work

    how do i set up my 3g sim for my iPad? the sim is already activated but i dont know how to get it to work

    Setting>Cellular Data>On

  • I had set my passcode by pressing 1 repeatedly till it filled the passcode box. I dont know how many times I have pressed 1. Can someone tell me the character length of the text box of the Passcode

    Hi,
    My son foolishly pressed a single digit till it just filled the text box of the passcode. Now i dont know how many times he has pressed it. If I can know the charcter length, or how many digits can just fill the text box of passcode, I can unlock my ipad2. If anyone reading this has ipad2, he can do the same thing and count how many digits will just fill the text box. I will really appreciate the help.
    Thanks

    You can put the iPad into Recovery mode and Restore it. See this link and note the sentence commencing, 'If you restore from a different computer.... ' down near the bottom of the page.
    http://support.apple.com/kb/HT1808

  • HT201269 I accidently used the old iPhone 4s, and did not set as a new phone for my 5, now I dont know how to fix it

    I got a new phone last month. I just tried to sync it to my computer and I forgot to click on new account,, it synced with my old phone now I dont know how to get my new phone info in here

    Hey philly rose,
    It sounds like you accidentally restored your new iPhone 5 with the backup of your iPhone 4S. If you want to return the iPhone 5 to factory settings, and have the option to setup as new, you'll want to restore it with iTunes (omitting the steps about backing up and restoring from backup):
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Enjoy your new iPhone!
    Matt M.

  • How can i sync my ipod shuffle from my itunes i own an itouch i want to sync in the same itunes but dont know how

    hello to all i need help i dont know how to sync my new ipod shuffle.
    i have an itouch 2nd gen and i want my ipod shuffle to sync the same itunes library songs to my ipod shuffle.
    i read topics regarding on how to sync with multiple ipods in one library but dont understand.
    my O.S is windows xp
    thank you all!

    All you really need to do is connect the Shuffle to iTunes and set it up to sync however you like.  It will have no affect on your iPod Touch syncs.
    B-rock

  • I recently purchased songs from itunes via my pc and I dont know how to get them onto my iphone? When I click the sync button it says I will lose all the music currently on my iphone.. Help :(

    I recently purchased songs from itunes via my pc and I dont know how to get them onto my iphone? When I click the sync button it says I will lose all the music currently on my iphone.. Help

    If you're syncing with a different iTunes library than the one you previously synced with, then there is no way around it. You're gonna loose the old data. The only way round it would be to make sure that all the music files on your iPhone is also in your iTunes library. If you still have access to the computer with the old library, you could copy the files on to an external harddrive, and then import them into your new iTunes library.
    If it is in fact the same library, then the music currently on your iphone, is also in your itunes library. Just make sure that the artists/albums/playlists, or whatever you sync contains these tracks, that you allready have on your phone and don't want deleted. What i do is, i create a playlist specifically for my iPhone, and i set it up to only sync with this playlist. Whenever i hear a track from my iTunes library or buy a new track that i want on my phone, i just drag it to this playlist and next time i synchronize, it's there without deleting anything else.

Maybe you are looking for