N97 Errors when connecting via mini usb

Hey All,
I am a happy new owner of an N97, it took alot to leave my normal HTC and HP iPaq but i love the N97.
Except one little thing, i am unable to connect my phone to the PC suite via USB.
when i connect the phone it does give me the option to select PC Suite and i choose it but Nokia PC synch and Ovi Suite says the phone is not connected!
please can someone help??
Solved!
Go to Solution.

An alternative to PC Suite is to use Nokia's Ovi Suite 2. There is a recently released beta available from Nokia's Beta Labs. It's a much nicer interface and everything is integrated into one interface instead of a mish-mash of bits and pieces that form PC Suite.
http://betalabs.nokia.com/ovisuite
Ovi Suite 2 has been a lot less problematic for me. When it goes from Beta to Final release, Nokia will be getting rid of PC Suite anyway so you'll already be familiar with the software when it's the only offering from Nokia.
Message Edited by matt_t on 08-Oct-2009 11:13 AM
Nokia N8 on O2-UK
Firmware 022.014

Similar Messages

Password expired error when connecting via AFP to a server.

Hello everyone, I am new to OSX server and have had much help from everyone here on many issues just be reading the posts. But now I have one issue that is driving me nuts and I cannot seem to fix it.
I have 10.5.8 with Open Directory and one shared folder on that server. Half the users that connect to the server via AFP (Because they have laptops and conenct remotely) get a password expired error. As a work around I have setup new accounts for them with different ID's which do work but no matter what I do, the old ones wont. I have also noticed that a user can try and connect just one time and thier account gets disabled even though we have it set to disable after 5 failed attempts.
Any help would be greatly appreciated. Thank you.

Hi
One thing you could try is to double-check the Self Signed Certificate has not expired. I've seen this cause similar problems to yours. If it has expired you'll see a Red Triangle by the side of it. Amend it and change the start date to the current date and the expiry date to sometime in the future. It makes sense to set it to 3 or more years from the set start date. There's no logical reason to leave it at the default 12 months. Especially as you'll probably forget this and not watch out for it when it's due to expire.
After you've done this you could set a Password Policy for your users to change their passwords at next login.
Tony

Error when connecting via ODBC connections

Alright, so....
I have a Windows 7, 64 bit OS. I installed Oracle 10g, I installed Crystal Reports Xi release 2.
Via ODBC Administrator, I set up my data sources, and they all connect successfully.
I go into Crystal Reports, create a new report, and attempt to set a new connect and use those same data sources. I get prompted for my user name and password. I get the error:
Logon failed.
Details: IM004:[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandel on SQL_HANDEL_ENV failed
HELP! I've changed security settings, I've wiped my machine and started over from scratch, I've even installed Oracle 11g. Please help! I'm about to pull my hair out. I am sure this is probably something easy or something I've overlooked, but I give up and throw the towel in.

Go into \windows\syswow64 and use the odbcadm32.exe located in there. It's the 32 bit version of the ODBC Administrator.
Also, search before posting and this has been answered.
And you need Service Pack 6 to be supported on Windows 7.
Thank you
Don
Edited by: Don Williams on Aug 27, 2010 2:31 PM

Apache is throwing NLS_LANG error when connecting via HTTPS using a DAD

Our Apache server is throwing this error
[Wed May 6 11:53:52 2009] [alert] [client 69.246.251.48] [ecid: 223452213192,1] mod_plsql: Unable to issue alter session : alter session set nls_language= "AMERICAN" ""
every time we connect to the server using HTTPS (the connection is using DAD -- see below for the DAD configuration).
If we run the same connection using HTTP it works fine.
Anyone know why this would happen and how we can correct it?
DAD configuration:
<Location /plshes>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername hes
PlsqlDatabasePassword @<password here>=
PlsqlDatabaseConnectString hpprd NetServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA_WE8ISO8859P1
PlsqlAuthenticationMode PerPackageOwa
PlsqlSessionStateManagement StatelessWithFastResetPackageState
PlsqlErrorStyle ModPlsqlStyle
PlsqlAlwaysDescribeProcedure Off
</Location>

@AMN -- I'm sort of in your camp in that I don't think I should have to remove that line (which I've not been able to test yet, by the way). It's possible removing the line might bypass the issue since the statement will never get issued in the first place, but I will know there is some sort of issue between HTTP and HTTPS that is throwing this error.
To answer your questions:
1. The portal database (IASDB) returns:
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CHARACTERSET WE8ISO8859P1
2. What do you mean by "pls/hes"?
3b. Which type of OAS? Can you clarify this question? OAS 10g (which means IASDB is version 9i). We run Apache using Webcache. This OAS serves up a custom application written largely in Forms and PL/SQL. Hmmm, maybe that's not what you mean by this question , though...
3a. Explain our SSL configuration -- I'll try. I configfured this 4 to 5 years ago and haven't changed it at all other than to update the Oracle Wallet certificates every year or two. We have a single physical server that hosts our infrsastructure and mid-tier components and nothing more. As mentioned, Apache is our webserver and we run Oracle's Webcache. The twist in our configuration (and probably the source of this issue we are having is somewhere in this twist) is that we use one physical server and one Apache web server to serve up both HTTP and HTTPS using a virtual host within Apache and then we deifned multiple sites and origin servers with several redirects on various ports so we can handle SSL and non-SSL connections depending on whether they come to us externally (inTERnet) or internally (inTRAnet).
Webcache sites (hes2 is the server name):
Site Origin Server
hes2:7778 hes2:7779
www.OurWebSite.com:80 hes2:8000
hes2:80 hes2:7779
sso.OurWebSite.com:80 hes2:7777
www.OurWebSite.com:443 hes2:4444
Webcache origin servers:
hes2:7777 HTTP
hes2:7779 HTTP
hes2:8000 HTTP
www.OurWebSite.com:4444 HTTPS
Webcache listen ports:
443 HTTPS -- has Oracle wallet defined for it
7778 HTTP
80 HTTP
Navigating to http://www.OurWebSite.com will redirect to hes2:8000, which is our virtual server (configuration below). Navigating to https://www.OurWebSite.com will redirect to hes2:4444.
There is probably a little more I need to provide to answer the "SSL configuration" question, but I think that is enough for now as this is already a long response -- my apologies for that.
Virtual host configuration in httpd.conf:
<VirtualHost *:8000>
ServerName www.OurWebsiteName.com
ServerAdmin [email protected]
Port 80
DocumentRoot "/u01/app1/oracle/10gasm/Apache/Apache/htdocs"
RewriteEngine on
RewriteOptions inherit
RewriteCond %{HTTP_HOST}!^www\.OurWebSite\.com [NC]
RewriteRule ^/(.*) http://www.OurWebSite.com/$1 [L,R]
OssoIpCheck off
OssoConfigFile /u01/app1/oracle/10gasm/Apache/Apache/conf/osso/osso-www.conf
<Location /portal>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Location>
<Location /forms>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Location>
<Location /discoverer>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Location>
<Directory /u01/app1/oracle/10gasm/Apache/Apache/htdocs/docs>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Directory>
<Directory /u01/app1/oracle/10gasm/Apache/Apache/htdocs/images>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Directory>
<Directory /u01/app1/oracle/10gasm/Apache/Apache/htdocs/optiform>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Directory>
LogLevel error
ErrorLog "|/u01/app1/oracle/10gasm/Apache/Apache/logs/www_error_log 43200"
</VirtualHost>

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

Mac pro does not recognize ipad device when connected via usb port, suggestions?

mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7

Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

Apple tv showing wire to connect to itunes via mini usb cable which i dont have?

apple tv showing wire to connect to itunes via mini usb cable which i dont have?

You need to get the cable to restore the ATV to factory settings, following the procedure here.
USB mini cables are available from many different sources; often even from local stores like CVS or Walgreens. They are inexpensive, as little as a few dollars online & around $5 from some local discount stores.

I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

Not all car systems are compatible with the iPod touch. Does the documentation/website for the car system say it is compatible with an iPod with iOS 5?

My computer can not recognize the new Apple iPod touch when it is connected via the USB cable (that goes with it) attempt to attach it to the computer.

My computer can not recognize the new Apple iPod touch when it is connected via the USB cable (that goes with it) attempt to attach it to the computer.

You do have iTunes installed right?
See:
iOS: Device not recognized in iTunes for Windows

My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.

My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB. I have reinstalled iTunes to no avail.

Hey, I may have to if I can't get this one to work!!
I have tried a different USB to no avail. Both cables work on my old Dell so I don't believe they are the issue.
I uninstalled iTunes as directed by Apple Support and reinstalled. Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs.

Had a problem with my iPad 2 and took it into apple store to get it restored to factory settings. I now need to restore from iTunes but can't see my iPad when connected via USB, any ideas please?

Help !! I had a problem with my iPad 2 this morning which resulted in me taking into the apple store and them restoring it to factory settings. They advised me to restore all my apps etc from iTunes which I am trying to do, however once connected via the USB I cannot see it as a device on iTunes, and I keep getting the message on my laptop "the iPad cannot be used because it requires iTunes version 11.1 or later, go to iTunes.com/uk and download the latest version"
I cannot see what the version of iTunes is on my iPad and have gone into safari to try and download but not able to as it tells me iTunes is already loaded. I have the latest version on my laptop so I am stuck as to what to do next. Any suggestions please??

Hi there Paula120,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

T420 - external 24" monitor DVI- Displayport : not detected when connected via KVM switch

Hi,
I've been using a 2port USB KVM Switch from InLine for a long time connecting a mac mini and a macbook pro
to a 24" LCD. Recently I had to replace the MacBookPro with a T420. Unfortunately the T420 does not detect the
monitor, when connected via the KVM switch.
I tried:
A) T420 -> Lenovo Displayport to DVI-Adapter -> KVM-Switch -> 24" monitor: NO SUCCESS
B) T420 -> Thinkpad miniDock Series 3 DVI Port-> KVM Seitch -> 24" monitor : NO SUCCESS
C) T420 ->Thinkpad miniDock Series 3 DVI Port-> 24" monitor - > SUCCESS
D) T420 ->Thinkpad miniDock Series 3 VGA Port -> 24" monitor - > SUCCESS
So I have a workaround, but leaving out the KVM switch is not a long term option.
This is all on Win 7 professional / 64bit
Using config (A) I then installed the Intel HD Graphics Driver version 8.15.10.2342 16 May 2011
SURPRISE: during driver install, the monitor WAS detected!!!
SECOND SURPRISE: after reboot I was back in the old situation where the monitor was NOT DETECTED
CONCLUSION:
Seems like a software issue with the Intel HD Graphice driver.
ANY HINT/COMMENT/HELP highly appreciated!
Thanks,
Michael

hey mgold,
as the T420 works correctly with the external monitor and with the miniDock ; it is sad to say the the KVM switch is non-compatible.
I would recommend that you get in contact with the manufacturer of the KVM. At the same time, try uninstalling the current video drivers of your T420 and see if it makes any difference with the KVM if the T420 is running on a generic driver
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Error when connecting to portal from some machines

Hi all,
Can anyone help me with this.
I get this jserver error when connecting to portal from some
client machines.
I works fine from the others. Any ideas?
This is the error I get:
[08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
label=73 url=http://odeceixe:81/pls/portal30/!
PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
[08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
Unexpected Exception, name=content-fetcher5
java.io.EOFException: Premature EOF encountered
     at HTTPClient.StreamDemultiplexor.read
(StreamDemultiplexor.java, Compiled Code)
     at HTTPClient.RespInputStream.read(RespInputStream.java,
Compiled Code)
     at java.io.InputStream.read(InputStream.java:95)
     at java.io.InputStreamReader.fill
(InputStreamReader.java:163)
     at java.io.InputStreamReader.read
(InputStreamReader.java:239)
     at oracle.webdb.page.ContentFetcher.run
(ContentFetcher.java, Compiled Code)

Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

Error When connecting proxy

Hi,
When I try to connect proxy in application, it is not connecting instead when I check whether it is going through proxy or not it is telling that it is establishing direct connection only. Here I have posted part of the coding. Please If any error give me a hint.
            System.setProperty("ProxySet", "true");
            SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
            proxy=new Proxy(Proxy.Type.HTTP,addr);here in this code part I am checking whether is connecting with proxy or not.
URL u = new URL(url);
URLConnection uu=u.openConnection(ScrapperInterface.proxy);
try
                URI uuu = uu.getURL().toURI();
                List l=ProxySelector.getDefault().select(uuu);
                for (Iterator iter = l.iterator(); iter.hasNext(); )
                     Proxy proxy = (Proxy) iter.next();
                     System.out.println("proxy hostname : " +proxy.type());
                     InetSocketAddress add = (InetSocketAddress)proxy.address();
                     if(add == null)
                         System.out.println("No Proxy");
                     else
                         System.out.println("proxy hostname : " +add.getHostName());
                         System.out.println("proxy port : " +add.getPort());
catch (URISyntaxException ex)
                Logger.getLogger(StartThread.class.getName()).log(Level.SEVERE, null, ex);
}Output is:
proxy hostname : DIRECT
No Proxy

Re: Error When connecting proxy You didn't get any error when you created the connection. Your title is misleading. Probably you are misleading yourself - see below.
System.setProperty("ProxySet", "true");That does nothing. There is no such property, contrary to widespread belief.
SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
proxy=new Proxy(Proxy.Type.HTTP,addr);... and using java.net.Proxy has nothing to do with system properties in any case.
URLConnection uu=u.openConnection(ScrapperInterface.proxy);Here you are opening a URLConnection via the proxy. As you got output from the code further down it is clear that this step must have succeeded. So all the code below is pointless.
URI uuu = uu.getURL().toURI();Here you are getting the URI you created the connection for.
List l=ProxySelector.getDefault().select(uuu);Here you are getting the Proxies the default ProxySelector would have given you for that URI. Nothing to do with the URLConnection you created, and nothing to do with the Proxy you created either.
InetSocketAddress add = (InetSocketAddress)proxy.address();So here you are testing the proxy address for the system's default proxy for that URI. Again, nothing to do with what you did above.
What you should be doing here is using the URLConnection you have already created. Not testing an address.

N97 Errors when connecting via mini usb

Similar Messages

Maybe you are looking for