N97 lock key problem

Whenever my phone turns off because of the empty battery I connect to my PC in rder to charge but when I turn it on the csreen lock key does not function. the phone start unlocked but when it get locked the key does not unlock the phone. So the ony way to go back to normal is removing the battery to switch off the pho and restart it.
Is this a common issue?

I have this exact same bug and basically this prevents me from using the device in a way that would be normal. Honestly, I paid quite some money for this machine, and it keeps annoying me with these relatively small, but very user un-friendly bugs.
It almost certainly has to do with firmware upgrades, because I didn't have this particular bug before upgrading the firmware, although the older version had other bugs...
It doesn't look promising...

Similar Messages

  • Shift-Lock Key Problem

    Any other MBA users finding that you sometimes have to press the shift-lock key twice to get it to engage?
    It is not a problem with the button because it works 100% of the time if I cycle it on and off, however, sometimes when I first press it, it does not seem to recognise the first press.

    Hi,
    simple reasoning. Quite often you incidentally hit the caps lock key while trying to hit the shift key, thus from then on all following letters are in UPPERCASE - so you have to press the key a bit longer before it is locked. less OFTEN PEOPLE shout at each other in discussions for example
    Volker

  • Caps lock key problem

    In Mack Book pro - the CAPS lock key will have to be kept pressed for a long time. There is no way to get rid of this. Any of you if you face this problem please let me know how to solve this.

    See this similar discussion: Is there a way to disable this behavior? It is amazingly annoying.

  • Caps Lock key problem please help me

    Sir
    i want to check the caps lock key on or off
    how can i do?
    Please help me
    Thanks in advance

    Toolkit.getDefaultToolkit().getLockingKeyState(...);

  • Caps Lock Key Problem or Feature?

    just wondering if this is a new feature on Penryn Macbooks, but if i hit the CAPS LOCK Key too fast it doesnt activate or turn on, if i hit it slower, like leave the finger on it a bit longer it does, is this the same for everyone?

    Anyone else confirm this? and also does anyone find it annoying?

  • Lion - num lock and caps lock keys problem

    Since installing lion I have to have num lock key and caps lock key turned on to type normally (otherwise I get all numbers if num lock off, or all caps if cap lock off). It's like the keys' functions have been reversed. (2.16 GHz MacBook).
    Any help much appreciated.

    CHi Chubrock
    if you run Windows 8 and I guess you have backlit keyboard for your GT70 ONE, please try to download new firmware here, and give it a try, I guess the worng firmware installed in your system ,  please choose the firmware with backlit KB and install , good luck
    http://www.msi.com/product/nb/GT70-0NE.html#/?div=Firmware&nbos=win8

  • Keypad lock key problem

    I recently upgraded the phone software to nokia v 20 in my nokia asha 202. The updates are nowhere to be seen in the phone which is a different issue but after the update the key lock button has started malfunctioning. Previously it used to lock and unlock the keypad but now it doesnt unlock the keypad anymore, the display lights just comes on and I have to press the unlock button in the screen to unlock it. Can anyone offer any help?
    Thanks

    As per official Nokia site..the change log is..
    Asha 202
    Change log of Nokia Asha 202 20.36/20.37 SW release:
    Nokia Browser 2.0
    New version of the Nokia Store app
    New version of the Nokia Maps app
    Call timer for viewing call duration
    Can now unsubscribe from the Tips and Offers service
    General usability and performance improvements
    For the Keypad lock issue, first Back-up your data and try a Factory Reset..
    Else, can you re-install the Firmware and check if the issue remains ...

  • Caps lock and num lock key problems

    hi- so when the caps lock and num lock are lit my keys type lower case. when the caps is not lit and the num is lit my keys type upper case. when the caps and the num are not lit just the num keys work meaning j=1 k=2 etc... any ideas how to get back to normal? thanks patch

    Try the suggestions in this thread.
    (13280)

  • Problem with lock key.

    Dear Sir/Madam,
    I would like to inform you that, I am facing problem in my lock key since from the last one year after apple change my i phone 5 due to sparking problem in phone at the time of charging. Then apple replace my phone but within few weeks i realize that my lock key not working properly then i have gone to apple service center but i was shocked when apple told me that some liquid spot found inside your i phone so we will not able to help you. I was shocked that apple give me this kind of completely negative response. I was never expect that apple behave like this. Apple give this ph by replaced my old one & now apple behaving like this. They never thought that customer not fool that he will use his ph in to the water.
    After one year I have read an article in apple support site that mostly i phone 5 got the same problem ( lock key problem)  and they are ready to change the lock mechanism for those i phone 5 having the same problem. I check my serial no also & found my phone is also eligible for the same service. I have go to the apple service center & give him my phone but i was shocked again when they also told me that sorry sir some liquid spot found in your phone we are not able to help you.
    I am not able to understand what happen to the apple services after sir stive jobs. I have no physical damage in my phone then why don't apple change the lock key mechanism if they already know that fault is totally from the apple end.
    I am just expecting that apple will take my issue seriously i am facing the problem since last one year but no one giving me positive response. I am still thinking that is their i have done any mistake for choosing the apple product. Is it the apple of sir stive jobs the people are talking about this.
    I am giving sone detail to you for your reference.
    Serial no. F18K85WBDTWD
    IMEI No. 01 355600 892277 1
    Waiting for your positive response.
    Regards
    Sanjay Ghildiyal
    9953335431

    We are just users like yourself and don't work for Apple therefore I suggest you contact them. The information on how to do that is on their web site.

  • Problem that starts with *apparent* sticking caps lock key

    I have a mid-2009 MacBook Pro (two weeks outside of AppleCare, of course!).  Last night, it appeared the caps lock key was sticking. It would type in all caps even when I hit the button and the green indicator light went off. Moments later, I noticed that the option that shows you all the windows on the same screen was suddenly going very, very slow. I tried to restart but it started in safe mode - twice. It finally started correctly on the third or fourth reboot. I hoped it was a fluke.
    Unfortunately it's happening again and rebooting doesn't seem to fix it - I can't put in my password to login because it thinks I'm typing in all caps.
    Any ideas, please?  Thanks.

    This may enter the Apple Hall of Fame for stupid posts.  I spent a couple hours last night restarting the computer, trying restore etc....and really doing anything I could from clinton's link in order to identify the problem.  I'd even called our local store to let them know I would be there first thing in the morning (I'm boarding a plane in a few minutes and really needed my laptop for this trip).
    So after doing all of those things + removing the caps lock key to see if it was somehow manually stuck, I go the store this morning.  Virtual panic.  I needed a presentation off the laptop for a workshop tomorrow and I hadn't backed up since I created it...
    I enter the store, I begin to explain the situation in detail, I open up the laptop....
    And the guy at the store says "Did you notice your shift key is stuck down?".  Why No, I hadn't noticed that!  With a tiny wiggle and a tap, that key popped back into place and the computer worked fine.  The Safe Mode was happening because the shift key was down.

  • N8 problem with side lock key

    Hi,
           Did anyone find any problem with N8 side locking key. Mine one has to be slided really hard to get it locked and unlocked, the mechanism is not as smooth as in the earlier phones.
    Trying to wrap people in the cocoon of seamless connectivity during their mobility.

    I also have this problem after installing version 5.0.0.508. It appears that I no longer have an option for locking the keyboard. When I select Options/Screen/Keyboard and select Left Side Convienence Key Options it does not show up in the list of selectable options.

  • Software 5 update problem with keyboard lock key

    I just downloaded the software update v5 and when it was all done my keyboard lock key stopped working, has anybody else had this problem? any solutions other than a downgrade?

    I also have this problem after installing version 5.0.0.508. It appears that I no longer have an option for locking the keyboard. When I select Options/Screen/Keyboard and select Left Side Convienence Key Options it does not show up in the list of selectable options.

  • BIT Locker Key is not working in a first attempt.

    I have enabled bit locker key for my system. when I restart the system it will ask for bit locker and like how many time I enter the password it won't work and says wrong key. My friend suggested a temporary solution which is working. I have remove
    keyboard before booting. after booting I have to plugin the keyboard and now the bit locker key works. I am not able find the problem. Please help.
    OS : Windows 7 enterprise edition 32bit
    Mallik K

    Hi,
    What's the type of your computer? Desktop or Laptop? Have you tried to use other keyboard to test this problem.
    As In my opinion, Since it shows password input error, it should not Bitlocker encrypt problem. Maybe system couldn't identify the character you typed, maybe it is keyboard or its driver problem. It would be better to change another keyboard to check this
    problem for test.
    Roger Lu
    TechNet Community Support

  • Nokia Lumia 620 Lock Key

    Hi,
    I got Lumia 620 in March and its lock key is not working now. There was no damage in phone and when i visited service center, they said that you may have pressed it hard and due to this, key has been damaged now.
    They are asking me to replace the lock key. I am really not sure why should pay for it when there is no damage in phone. There might be a possibility that key was not in good condition when i bought this phone and it start creating problem when i start to use this phone.
    Please provide me solution as i can not pay for a new key as the phone was not damaged by me.
    Thanks,
    Ashish
    Solved!
    Go to Solution.

    The Nokia Care Point following an inspection makes a call on the cause of the damage. If they think it is due to a manufacturing defect then it is covered under warranty. Otherwise it is due to misuse and not covered.
    If you are unhappy with the assessment of that particular Nokia Care Point, you can always get a second opinion from another Nokia Care Point.  

  • Locking datafile problem using oracle agent

    Hi All
    we are facing locking datafile problems when we are taking backups using oracle agent
    in veritas we have selected the option not to lock files when taking backups
    is there any other settng which we have missed so that it doe s not lock files
    regards
    kedar

    If you use a version locking policy, you should use a version field, not reuse your primary key for that. If you map the version field (you don't have to), you need to map it as read only. This makes sense: you don't want the application to change this version field, only TopLink should change it. This is where your exception comes from.
    If you want to use existing database fields for optimistic locking, you should use a field locking policy. It does not make sense to use the primary key for that: it never changes, so you never know when the object has been changed by another user.
    So you can do two things now to fix your code:
    create a version column in your database and use a version policy (preferably numeric) or use a field locking policy and use job and salary, or all fields)
    There is a pretty good description of locking policies in the TopLink guide:
    http://www.oracle.com/technology/products/ias/toplink/doc/10131/main/_html/descun008.htm#CIHCFEIB
    Hope this helps,
    Lonneke

Maybe you are looking for

  • Browser page still open ,adobe form is closed

    Hello , We are facing browser issue in Adobe Interactive forms.We are opening the form from a thirdparty portal and whenever we click on submit button the adobeform is closed but the browser is not getting closed. Can someone suggest me where should

  • How to config JDK 5.0 to use ENGLISH locale on WinXP (chinese)?

    Hi, I have just uninstall my JDK 4.0 and install JDK 5.0 on my laptop, which has a Simple Chinese Windows XP on it. When I type "javac -help", "javah -help" or "jar -help" (in fact, all .exe files in JDK/bin), I get a 'Simple Chinese' version of help

  • I can't remember my password to my itunes or app account or the security questions,

    I can't remember my password to my itunes or app account or the security questions,

  • Trying to find copyright and trademark symbols

    OK, so I know where to find the shortcuts to text symbols in windows, but where on a Mac is the chart for making "not normal" text symbols; (example): trademark, copyright, degrees, diameter, (more or less how do I find the character map file)

  • Where shall I go

    I would like to take SAP training and get a job in SAP my background: 1. B. Eng. (manufacturing) 2. MBA (US), MIS 3. MA Quant 4. ABD Economics 5. about 12 years of software development, pretty much SDLC, Project management as well 6. OOP much more Al