N97: Loosing WLAN Connection

Hi friends
Me again, sorry: Since I own the N97, it happens very often, that it looses the WLAN connection at my home network, without any reason. The icon remains, when I point to it, it says that it found the network, but when I choose connect, it doesn't work. I always have to restart the device, then it works ok, maybe for more than one day, but suddenly - again it stops working, but I cannot see any action from my side which causes this.
Any idea?
Another question related to this: is it necessary to use a program like WeFi with the N97, does it have any advantages?
Thanks!
Lonie

What message do you get? Look for running apps in the background that uses WLAN. What puzzels me, is why it's getting worse after hours. Look if the phone is registered (MAC address) in the router or AP.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

  • N97 unstable WLAN connection.

    I've always had a niggling problem with N97, and previous N95 8GB, in which home WLAN connection seems to time out if left idle for few mins. Phone shows WLAN connection is established throughout, it's just not retrieving data. I can browse page to page, but if I leave a page open for a while the browser won't retrieve new page when requested, just sticks on connecting or get no gateway reply. If homescreen widget uses WLAN it stops updating. Last night I had downloaded a programme with iPlayer, when I checked it had completed I was asked to download the licence key, but as download had finished few mins before it stuck on connecting when attempting to retrieve it. Had to open file in RealPlayer, then download key when prompted.
    As you can imagine this can get frustrating at times, especially when I'm in a hurry. I need to close the app/connection, wait a minute, then reconnect. It's not a native browser specific problem as I get same behaviour with Opera Mini, YouTube app, etc.
    I'm not sure whether problem is with N97 or router, if I can rule out phone I can concentrate on investigating elsewhere. I've altered the router DHCP pool for static IP on PC, not sure if/how that would affect phone connectivity with WAN. IP address and DNS addresses are default set to automatic in phone for my WLAN. But as I say there's no problem connecting, it's that if it's not active for short time it won't get active again without reconnecting.
    Any ideas/comments?

    You can try turning off the power saving in the advaced settings of WLAN on your N97.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Equium P200: sometimes looses WLan connection

    Hi there
    Looking for help, my Equium P200 sometimes looses connection to the net. My partners do not!
    Also when in other peoples it losses signal so I know its the laptop, its very intermittent , it can go for months and nothing then it can do it twice in one night!
    When it does happen I run the off line help it says that there is nothing wrong with the pc! It says there is no networks to connect to despite i know there is any ideas
    I think its a Atheros or something similar. Sorry so vauge

    Hi
    You could try to update the WLan driver in most cases this helps
    The BIOS update would be also advisable if a newer BIOS version is available on the Toshiba European driver page.
    Sometimes something like that happens to me if it happens I click right on the WLan icon in the taskbar and choose repair.
    Mostly this helps to get the WLan back

  • Multiple WLAN connections

    Does anyone know of a way to get my PODCAST and Email applications to use multiple WLAN connections?
    I spend most of my day in one of two places, each with a different WLAN, and I'd the phone to have the sense to change WLAN connection as they become available.
    Thanks for your time.

    Depends, on what your phone is.
    If you're using an N97 or a 5800, or anything running on s60v5 for that matter, Go to Menu>Settings>Connectivity>Wireless LAN>Options>Settings>Show WLAN availability. Then you can also set how often it will set to scan for WLAN connections. This would allow the phone to scan for WLAN hotspots around you immediately. Be warned however that this will drain your battery faster.
    On an s60v3 phone, I am not very familiar but from what I know its in Menu>Tools>Connectivity>Wireless LAN>Options>Settings>Show WLAn availability.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • [SOLVED] Loosing Wireless Connection

    I am constantly loosing my wireless connection while I am trying to download something, usually I don't reach 60 MB and it's gone.
    I am also loosing my connection while browsing the internet for 2-3 hours.
    In both cases it reconnects after 2 minutes ,sometimes more.
    I still have my IP address during these 2 minutes.
    I tried different connection methods : wifi-menu, netctl, NetworkManager , manually with wpa_supplicant and dhcpcd(or dhclient) but they all lead to loosing my connection after a time.
    iwconfig
    enp11s0 no wireless extensions.
    wlp2s0 IEEE 802.11abgn ESSID:"FRITZ!Box Gastzugang"
    Mode:Managed Frequency:2.412 GHz Access Point: AccesPointX
    Bit Rate=52 Mb/s Tx-Power=19 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Power Management:off
    Link Quality=40/70 Signal level=-70 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:1698 Invalid misc:454 Missed beacon:0
    lo no wireless extensions.
    ip addr show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    2: enp11s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
    3: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
    inet 192.168.179.32/24 brd 192.168.179.255 scope global wlp2s0
    valid_lft forever preferred_lft forever
    sudo journalctl -u NetworkManager.service
    -- Reboot --
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> NetworkManager (version 0.9.8.8) is starting...
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> WEXT support is enabled
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
    Mar 15 18:05:09 Alik NetworkManager[161]: keyfile: parsing Auto FRITZ!Box Gastzugang ...
    Mar 15 18:05:09 Alik NetworkManager[161]: keyfile: read connection 'Auto FRITZ!Box Gastzugang'
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> monitoring kernel firmware directory '/lib/firmware'.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> rfkill2: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy0/rfkill2) (dri
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/platform/dell-laptop/rfkill/rfkill0) (platform driver dell-laptop)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiFi hardware radio set enabled
    Mar 15 18:05:09 Alik systemd[1]: Started Network Manager.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiFi enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WWAN enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiMAX enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> Networking is enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): using nl80211 for WiFi device control
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): driver supports Access Point (AP) mode
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 3)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): exported as /org/freedesktop/NetworkManager/Devices/0
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): bringing up device.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): preparing device.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): deactivating device (reason 'managed') [2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <warn> failed to allocate link cache: (-26) Protocol mismatch
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): carrier is OFF
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): new Ethernet device (driver: 'tg3' ifindex: 2)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): exported as /org/freedesktop/NetworkManager/Devices/1
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): bringing up device.
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> (enp11s0): preparing device.
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> (enp11s0): deactivating device (reason 'managed') [2]
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:1c.5/0000:0b:00.0/net/enp11s0
    Mar 15 18:05:10 Alik NetworkManager[161]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
    Mar 15 18:05:10 Alik NetworkManager[161]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
    Mar 15 18:05:11 Alik NetworkManager[161]: <warn> Couldn't acquire object manager proxy: Error calling StartServiceByName for org.bluez: GDBus.Error:org.freedesktop.systemd1.Loa
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> wpa_supplicant started
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0) supports 4 scan SSIDs
    Mar 15 18:05:11 Alik NetworkManager[161]: <warn> Trying to remove a non-existant call id.
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: starting -> ready
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: ready -> disconnected
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0) supports 4 scan SSIDs
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Auto-activating connection 'Auto FRITZ!Box Gastzugang'.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) starting connection 'Auto FRITZ!Box Gastzugang'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> (wlp2s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> NetworkManager state is now CONNECTING
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) scheduled...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) started...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) scheduled...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) complete.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) starting...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> (wlp2s0): device state change: prepare -> config (reason 'none') [40 50 0]
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0/wireless): connection 'Auto FRITZ!Box Gastzugang' has security, and secrets exist. No new secrets needed.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'ssid' value 'FRITZ!Box Gastzugang'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'scan_ssid' value '1'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'psk' value '<omitted>'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) complete.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Config: set interface ap_scan to 1
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: disconnected -> inactive
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: inactive -> associating
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associating -> associated
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'FRITZ!Box Gastzugang'.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) scheduled.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) started...
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): device state change: config -> ip-config (reason 'none') [50 70 0]
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> dhclient started with pid 321
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning IP6 addrconf.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) complete.
    Mar 15 18:05:15 Alik dhclient[321]: Internet Systems Consortium DHCP Client 4.3.0
    Mar 15 18:05:15 Alik dhclient[321]: Copyright 2004-2014 Internet Systems Consortium.
    Mar 15 18:05:15 Alik dhclient[321]: All rights reserved.
    Mar 15 18:05:15 Alik dhclient[321]: For info, please visit https://www.isc.org/software/dhcp/
    Mar 15 18:05:15 Alik dhclient[321]:
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): DHCPv4 state changed nbi -> preinit
    Mar 15 18:05:15 Alik dhclient[321]: Listening on LPF/wlp2s0/XX:XX:XX:XX:XX
    Mar 15 18:05:15 Alik dhclient[321]: Sending on LPF/wlp2s0/XX:XX:XX:XX:XX
    Mar 15 18:05:15 Alik dhclient[321]: Sending on Socket/fallback
    Mar 15 18:05:15 Alik dhclient[321]: DHCPDISCOVER on wlp2s0 to 255.255.255.255 port 67 interval 6
    Mar 15 18:05:16 Alik dhclient[321]: DHCPREQUEST on wlp2s0 to 255.255.255.255 port 67
    Mar 15 18:05:16 Alik dhclient[321]: DHCPOFFER from 192.168.179.1
    Mar 15 18:05:16 Alik dhclient[321]: DHCPACK from 192.168.179.1
    Mar 15 18:05:16 Alik dhclient[321]: bound to 192.168.179.32 -- renewal in 415231 seconds.
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> (wlp2s0): DHCPv4 state changed preinit -> bound
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> address 192.168.179.32
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> prefix 24 (255.255.255.0)
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> gateway 192.168.179.1
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> nameserver '192.168.179.1'
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> domain name 'fritz.box'
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) started...
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> (wlp2s0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) complete.
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> (wlp2s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> NetworkManager state is now CONNECTED_GLOBAL
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Policy set 'Auto FRITZ!Box Gastzugang' (wlp2s0) as default for IPv4 routing and DNS.
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Writing DNS information to /usr/bin/resolvconf
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) successful, device activated.
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) starting DHCPv6 as requested by IPv6 router...
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning DHCPv6 transaction (timeout in 45 seconds)
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> dhclient started with pid 380
    Mar 15 18:05:18 Alik dhclient[380]: Internet Systems Consortium DHCP Client 4.3.0
    Mar 15 18:05:18 Alik dhclient[380]: Copyright 2004-2014 Internet Systems Consortium.
    Mar 15 18:05:18 Alik dhclient[380]: All rights reserved.
    Mar 15 18:05:18 Alik dhclient[380]: For info, please visit https://www.isc.org/software/dhcp/
    Mar 15 18:05:18 Alik dhclient[380]:
    Mar 15 18:05:18 Alik dhclient[380]: Listening on Socket/wlp2s0
    Mar 15 18:05:18 Alik dhclient[380]: Sending on Socket/wlp2s0
    Mar 15 18:05:19 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 1060ms.
    Mar 15 18:05:20 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 2120ms.
    Mar 15 18:05:22 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 4380ms.
    Mar 15 18:05:26 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 9150ms.
    Mar 15 18:05:35 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 18730ms.
    Mar 15 18:05:54 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 36040ms.
    Mar 15 18:06:03 Alik NetworkManager[161]: <warn> (wlp2s0): DHCPv6 request timed out.
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> (wlp2s0): canceled DHCP transaction, DHCP client pid 380
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) started...
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    Mar 15 18:11:47 Alik NetworkManager[161]: <warn> Connection disconnected (reason 2)
    Mar 15 18:11:47 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: completed -> disconnected
    Mar 15 18:11:47 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: disconnected -> scanning
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: scanning -> authenticating
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: authenticating -> associating
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associating -> associated
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
    Not surprisingly , everything works fine on Windows.
    Thanks for the help
    Last edited by ollen (2014-03-16 00:25:44)

    first of all I stopped my NetworkManager.service and then :
    sudo wpa_supplicant -Dnl80211 -iwlp2s0 -c/etc/wpa_supplicant/wpa_supplicant.conf &
    Successfully initialized wpa_supplicant
    wlp2s0: CTRL-EVENT-SCAN-STARTED
    wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    wlp2s0: Associated with XX:XX:XX:XX:XX
    wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    and then I run
    dhclient wlp2s0
    but no output after this command but I get my IP address
    I also ran this command
    dhcpcd wlp2s0
    and the output is
    dhcpcd[2163]: version 6.3.1 starting
    dhcpcd[2163]: DUID XX:
    dhcpcd[2163]: wlp2s0: IAID XXX
    dhcpcd[2163]: wlp2s0: soliciting an IPv6 router
    dhcpcd[2163]: wlp2s0: rebinding lease of 192.168.179.32
    dhcpcd[2163]: wlp2s0: leased 192.168.179.32 for 864000 seconds
    dhcpcd[2163]: wlp2s0: adding route to 192.168.179.0/24
    dhcpcd[2163]: wlp2s0: adding default route via 192.168.179.1
    dhcpcd[2163]: forked to background, child pid 2558
    a little bit of
    journalctl -u wpa_supplicant.service
    -- Reboot --
    Mar 15 18:05:09 Alik systemd[1]: Starting WPA supplicant...
    Mar 15 18:05:11 Alik systemd[1]: Started WPA supplicant.
    Mar 15 19:53:19 Alik wpa_supplicant[289]: Successfully initialized wpa_supplicant
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=2
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: rfkill: WLAN hard blocked
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:53:19 Alik wpa_supplicant[289]: rfkill: WLAN hard blocked
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Authentication request to the driver failed
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: No network configuration found for the current AP
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: Could not verify EAPOL-Key MIC - dropping packet
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Authentication with XX:XX:XX:XX:XX timed out.
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="FRITZ!Box Gastzugang" auth_failures=1 duration=10
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="FRITZ!Box Gastzugang" auth_failures=2 duration=20
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: No network configuration found for the current AP
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Last edited by ollen (2014-03-16 00:17:44)

  • WLAN connections issues

    My N97 won't stay connected to the WLAN connection. Owned me when i was trying to download something and it switched to GPRS and took all my credit without me noticing.... Anyone can help?

    Sorry to hear that! However you can organise your access points mate! Select "always ask" in your web options. In that way, your mobile will always ask you how you want to connect, even if you lose connection to your WIFI!

  • N97 mini WLAN-Issues after 12.0.110-Update

    Never had issues with WLAN-connection on old fw. Did switch off-on already both, the WLAN-Router and the N97mini. Do not want to make a reset because then i have to re-install everything again......
    I can usually connect once, for a short time, for one action. (Like synch Favourites with OVI-Maps). After that no chance any more for several minutes.
    When i go to connectivity-wlan it says "no wlan available", even after rescan.
    I simply have to wait for half an hour, then i can connect again, for one action.
    Anybody having the same issue?
    Solved!
    Go to Solution.

    Same problem here.  Just upgraded to the N97 Mini from the E61.
    I first noticed it in the pre-installed Podcasting (which I listen to 2+ hours a day).  Downloads seem to hang after about 10-15 meg of the download is complete.  I then noticed it in Ovi when trying to download a video and it would hang during the download as well.
    In Podcasting, I have to keep the connection manager open so I can disconnect the connection, then reconnect again in Podcasting.  It is very frustrating as an hour long podcast takes three cycles to complete!  Please help us Nokia!
    In Ovi - you just can not download large files.
    BTW - I have a D-Link Router in case there seems to be some type of compatibility issue?  No way to test on another WLAN connection at this point.
    This is the only major issue that I have identified so far since owning the phone (unless one counts that the phone is absent an automatic polisher/fingerprint remover).
    Patient for now - waited to buy this phone instead of getting an eye-moan.  Please fix the WLAN issue.

  • Loosing modem connection WRT54GS v6

    I have recently purchased the WRT54GS ver6 and continuously loose the connection from the modem to the router.  I have one wired, one wireless and both will work fine for 1-2 hrs, then lose the connection from the modem.  I run the Easy Link advisor, it finds the router, the two pc's, but no modem.  I power down then power up the modem and click the "fix connection", it goes through the two pages then connection established.... every time.  It finds the router, the two pc's but always has to have the modem restarted.
    Frustrated,
    mark

    Thanks for the response, totally appreciate the help.  The version I have, the version they try to have me download now is 1.50.9.  Where do I get the version 1.01.0?  When was it released?  Version 1.50.9 was released just this October.
    thanks again
    mark

  • Mac Mini Late 2012 OS X 10.9.4 loosing network connectivity

    I haven't found the exact issue on the forums nor outside it so I'm creating a new thread.
    My Late 2012 Mini started loosing network connectivity after upgrading to 10.9.4, both WiFi and Ethernet.
    Sometimes it takes around 5 minutes, sometimes more than 30 but the connectivity gets disrupted continuously, the packets stop going in or out for around 30 seconds. I've done PRAM and SMC resets, I've changed network locations, nothing helps and I've found nothing interesting in the system logs.
    Also I can't login to the Apple bugtracker due to some error so I'm reporting it here.
    The only USB devices i have connected are keyboard and mouse.
    Any help will be appreciated.
    Mac Mini Late 2012 i5
    OS X 10.9.4 Mavericks

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Thinkpad X220: bad wlan connection when docked and lid closed

    Dear forum
    I use a Lenovo ThinkPad X220. I have no trouble with the wlan connection when i use the notebook alone. The wlan connection is also stable when i use the notebook plugged in the dockingstation with the lid open. But when I use the notebook plugged in the dockingstation with the lid closed my wlan connection drops regularely to about 2 Mbps and gets very unstable.
    The ThinkPad uses the Intel Centrino Advanced-N 6205 wlan network controller:
    $ lspci | grep 6205
    03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
    The network controller uses the iwlwifi driver, that comes with the current linux-firmware package:
    $ pacman -Ss linux-firmware
    core/linux-firmware 20150206.17657c3-1 [Installiert]
    Firmware files for Linux
    I didn't change any options of the kernel module, everything runs in default mode:
    $ modinfo -p iwlwifi
    swcrypto:using crypto in software (default 0 [hardware]) (int)
    11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
    amsdu_size_8K:enable 8K amsdu size (default 0) (int)
    fw_restart:restart firmware in case of error (default true) (bool)
    antenna_coupling:specify antenna coupling in dB (default: 0 dB) (int)
    wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable (default: 1) (int)
    nvm_file:NVM file name (charp)
    uapsd_disable:disable U-APSD functionality (default: Y) (bool)
    bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
    led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
    power_save:enable WiFi power management (default: disable) (bool)
    power_level:default power save level (range from 1 - 5, default: 1) (int)
    fw_monitor:firmware monitor - to debug FW (default: false - needs lots of memory) (bool)
    At first I thought, the problem could be caused by the KDE power saving settings. I changed the settings, so nothing happens when I close the lid (no hibbernation or screen lock or something like that), but without success (the wlan connection is still unstable under the described circumstances).
    Also dmesg shows nothing that points out a problem (as far as I can see):
    $ dmesg | grep iwlwifi
    [ 19.688522] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 19.688679] iwlwifi 0000:03:00.0: irq 31 for MSI/MSI-X
    [ 19.696095] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 19.718023] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 19.718027] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 19.718028] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 19.718029] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
    [ 19.718145] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
    [ 19.753757] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
    [ 20.128443] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
    [ 20.128652] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 20.403905] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
    [ 20.404212] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 68.922975] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
    [ 68.923192] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    So I have no idea where this strange behaviour comes from (only wild guesses: buildfactor, antenna orientation,...).
    Any help would be really appreciated.

    hmmm...
    how about checking both your wired and wireless nic drivers in device manager to make sure that the "allow computer to turn off this device to save power" checkbox on the power management tab is deselected.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • What is WLAN connectivity, how to use it for inter...

    hi all
    i have nokia n79, i have know about WLAN connectivity, i mean how to use it. i just check it in my office it shows WLAN network found, i opend it and select start web browsing, then it asked select WLAN network there it already shows hidden WLAN, then i connected it through hidden WLAN then it asked WLAN network name, what is WLAN network name and how to use WLAN network for internet browsing. pls suggest me
    thanks/regards
    Chandrakant Rajolkar

    This will get you started.
    http://en.wikipedia.org/wiki/Wireless_LAN
    Check your user manual.
    http://europe.nokia.com/get-support-and-software/product-support/nokia-n79/guides
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • N95 WLAN Connection problems - Orange Livebox (UK)

    I am trying to get the N95 to connect to the internet wirelessly through Orange Livebox (UK). I have run the WLAN wizard and the phone has identified it. I have input the WEP key and thats worked fine.......except everytime I try to connect to the net via this method I get a connection error. Has anybody else had WLAN connection problems? Can anybody help?

    hi,
    did you press "1" button at the back of the Livebox before pairing ?
    what kind of error message do you get on the N95 ?
    does it fail the same way when you go through the homescreen "WiFi scanning / Start Web Browsing" or through Tools / WLAN Wizard ?
    Cheers,

  • My i phone 4  keeps loosing its connection with my Toyota Camry bluetooth-- anyone have any ideas why?

    My i phone 4  keeps loosing its connection with my Toyota Camry bluethoth   does anyone know what I can do about that?

    Ignore the ridiculous post by W1$C.  He posts that regardless of the person's question.
    Things you can do to solve your problem:
    1.  General>Settings>Reset Network settings
    2.  If this is only happening at home, power down your router for a minute, then power it back up.
    3.  Other basic troubleshooting steps outlined in the user guide are to restart, reset, and restore--first from backup, then if needed as a new device.
    Hope this helps.
    GDG

  • Firefox with wlan connect on laptop gives no connect what I need to maake wlan connect, network is ok

    have a bought a hp pavilion g series. had trouble with installation and updates. now problem that firefox with wlan has no connection. suse linux 12.1, wireless lan 802.11, FRITZ!Box Fon WLAN 7270, find no setup for wlaan in firefox that over the laptop wlan connection will work

    In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".
    See "Firefox connection settings" in [[Server not found]]
    You can find the connection setting here: Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select ''No Proxy''

  • WRT54GL loses Wlan connection

    Hi
    I have a problem with an WRT54GL Router. It keeps losing the Wlan connection. Then I have to reboot the router to get it working again.
    On some days everything works fine, and the other day I have to reboot every 5 minutes. 
    I don´t use P2P. So there are not many simultaneous connections. Mostly there are only one or two Wlan Clients active.
    Between the Router and the Client is only one Wall. Signal Strenght is at all times above 85%.
    Does anyone have an idea what might cause this?

    Try upgrading your router's firmware and reconfigure it from the scratch.
    Click on this link for the instruction.

Maybe you are looking for

  • Wireless printing from mixed Mac (10.6) and Windows 7 network

    My wife's five-year-old iBook is on its last legs and her demands just don't justify dropping a grand on a Macbook, sadly. I'm looking at a $500 Wintel laptop running Windows 7 Home. Will she be able to print to the printers connected to the AX witho

  • Since two weeks, I can't buy from my home store in Thailand.

    Since two weeks, I can't buy from my home store in Thailand anymore because I cannot read the language. Before, I could access any item I wanted and I bought devices and articles worth many thousands of US-Dollars over the years. The problem is that

  • Re: How to remove programs on Satellite M300?

    When you go into control panel ther is no uninstall programs icon????? So how do I remove unwanted programs, I am using Vista... Thanx for ya help

  • JDBC Outbound Connection to iSeries/DB2 Error CPF4204

    One of our interfaces processes 500 messages from SAP R/3 to XI and then to a JDBC outbound adapter to an iSeries DB2 database table.  While processing this stream of messages 2 or 3 times the adapter errors with the following: 03:12:15 (4332): Error

  • Brand new mac crashing & RAM full

    My housemate bought a shiny new Macbook Pro yesterday and has unfortunately had a difficult start with it. After installing Google Chrome, Dropbox, and Spotify it has been crashing constantly, bringing up errors when trying to update and generally mi