N97 many severe problems

Hey everyone, this is my first post so sorry if it is somewhere else.
I have the Nokia N97, ive had it for about 8 months. there are many problems with it.
1. I do not receive texts on time, they are recieved 4/5 days later than they were sent. (time stamp even says it)(they only pop up when i turn phone into offline mode and online mode again)
2. I can bearly place music or films or media onto my phone via USb cable as it will take an eturnity.(The first few files are incredibly quick but then it gets to the last 5% and either crashes or takes hours upon hours)
3. System crashes often.
4. Memory full so i cant make calls, look at contacts, read/write messages.
5. Facebook mobile currupts the phone so i do not recieve emails.
6. Emails dont always auto receive.
7. The touch screen does not work whenever i need to use it. (scrolling to my messages(that i actually receive) is a task by its self).
8. Vodafone wont help me because they are gay and say its out of warranty by a day.
9. I got outragous phone bills (£400 a month at the moment) when my contract is all inclusive)
10. phone freezes when i go through my media (i.e. music player, videos etc.)
11. My recent call log (made/recieved/missed calls) do not show as anything. they work then they go blank for about a month.
12. Windows Live mobile works fine but when installed will not let me read my texts nor emails.
That is about it at the moment.
Thanks if someone could help me with any of these would be great.
Foxyboi

If possible: connect it to computer and PC suite. Back up contacts and sms's etc. Do sa soft reset (diall *#7370# and enter security code 12345 (by default) ). This will delete everything on phonememory and free up space etc on the phonememory and clear out glitches.
Then back up from Mass memory such as music pictures etc. Format it.
Change messagememory to E - Reinstall your backup.
Now, try to install all posible apps on E, - use E as messagememory (not that after having the phone connectet to pc, the messagememory will revert to C, you have to set it back).
Make on folder on E called "music" - drag and drop musicfiles to that folder. refresh library.
Once in a while go inside the browser->options clear privacy data-> all. this will free up space on C.
See if this can make it work better.

Similar Messages

Many small problems in Mavericks

When user experience many small problem in daily work, I feel the design is failed.
Memory management has a lot of problem, I feel my macbook is abnormal slow after I upgraded to Mavericks. Sometime, I need to wait for several sec to get what I want.
I think this problem is extreme important for OS.
When I want to start a probelm, click once, no response, click twice, pop-up 2 times after 5 sec.
Then i change my way of work, clock one time, work on other task. 5 sec later, multi desktop switch the desktop to the starting program. Then, I don't know what I was doing.
Another is sound problem, sound doesn't work sometime and need some kind of procedure to get it back.
Please don't ask me do something to solve the problem everytime when it happen. It is OS task to work it properly.
Whatever how many great feature you added is meaningless if user daily experience is bad.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec bash
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

MacBook Pro 13" - Several Problems

Hi, I am still pretty new to Macs, since having PC's all my life.
I purchased my first mac, MacBook Pro in September of 2009.
Since then, I have had a few problems. While using the MacBook just checking email for example, the MacBook will become extremely hot, enough that I cannot even have it on my lap, or lay my hands on it. Another problem I am having, is when I am closing the screen to put the MacBook to sleep, I have to force the screen down a little, because it gets stuck, when I do force it, It makes loud cracking noises, like I am breaking plastic. Lastly, I am having several problems with the whole operating system. ( I have Snow Leopard) Many of my programs do not work on the MacBook, such as Photo Booth, None of the effects work, and sometimes the camera does not even turn on itself. While watching a DVD, if I pause the DVD, or rewind, etc a lot of the times the computer will freeze, and I have to force shut the program. When I do open DVD player again, it tells me there is no DVD Drive, so I have to restart the computer. These Operating system problems are persistent, and I have had to format my harddrive a few times and re-install the operating system.
Is there something I am doing wrong? Or is this a Apple Store problem, and I should bring my MacBook Pro in ASAP?
Thank You.

I should bring my MacBook Pro in ASAP?
That's what I'd do. BTW, make an appointment first (you can do it online).

Several problems after installing leopard

Last week I bought a new hard drive (WD 250GB 5400rpm) so I put the older one on a external case and installed the new one. A couple of days later I bought leopard and installed that. I have since had several problems. Whenever I power on my computer with the usb external drive (that used to be my internal hd but I erased it but it is still a GUID partition map). It will freeze for about 30-45 seconds and when I am able to control the mouse again My external drive doesn't show up. Also with the hd plugged in photo booth will not work. I just get a black screen with a camera with a line in it. All of these troubles go away though if I power up the macbook without the drive plugged in. once I plug it in it is shown on my desktop. Can anyone help me?

Again, search tool can be very useful:
http://discussions.apple.com/thread.jspa?messageID=5674931&#5674931
http://discussions.apple.com/thread.jspa?messageID=5651983&#5651983
http://discussions.apple.com/thread.jspa?messageID=5248920&#5248920
Read the whole thread below:
http://discussions.apple.com/thread.jspa?messageID=5598859&#5598859
many more threads to dig out!
Gig

Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.

Anything known on this issue? Solutions? Even importing files from memory card is a problem.
In import window images are not diplayed as images but all the same blue mini images.
vertical files are changed into landscape positions and more. Mac version.
cj de vries

Op 12 apr. 2014, om 19:27 heeft Yammer <[email protected]> het volgende geschreven:
Re: Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.
created by Yammer in Bridge General Discussion - View the full discussion
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6292450#6292450
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6292450#6292450
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6292450#6292450. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
THNX Problem solved

QT plug-in several problems

Hi everyone,
i'm developing a website which use QT plug-in to display an interactive VR movie. This website is composed with a first page with link to a second page that is written with classic ASP and is divided into two frames (upper wich contains the QT and lower which is the target (named targetFrame) of the hotspots).
I control the QT-plg-in with javascript functions described here:
https://developer.apple.com/documentation/QuickTime/Conceptual/QTScriptingJavaScript/bQTScripting_JavaScri_Document/chapter_1000_section_6.html#//apple_re f/doc/uid/TP40001526-CH001-DontLinkElementID14
And i insert the QT OBJECT in my page with the javascript function suggested here:
https://developer.apple.com/documentation/QuickTime/Conceptual/QTScripting_HTML/ index.html
I have encountered several problems to realize this webpage and i ask your help:
1) in IE (6/7):
When the user open the second page, all is loaded perfectly, but if the second page were closed and reopened IE ALWAYS crash. I tried with Safari and Firefox but they works very fine.
2) in Firefox:
As i explained before, i control QT plug-in with javascript functions suggested by Apple, but Firefox don't recognize theese functions as valid functions and therefore not work.
3) QT 7.2:
To control the click of hotspot i use the object parameters like suggested by Apple,:
QT_WriteOBJECT('vr/vr1.mov','545', '340','','HOTSPOT1','mylink1.asp','TARGET1','targetFrame','HOTSPOT2','mylink2.a sp','TARGET2','targetFrame')
When i start to develope this website i used QT 6.5, and everything works fine, but when i have installed the QT 7.2, everytime i click on an hotspot it open the link in a new window instead of the target frame i choose.
As you can realize i cannot publish this website, beacause of this problems.
Please HELP ME!!!

Hi Kirk, thank you for your answer.
Unfortunately, i had to remove the Demo.
However, i know that the demo works fine with Safari.
The problems are with IE 6/7 or Firefox.
I have noticed a strange behavior of the Demo for the first problem.
I have converted all pages from asp to htm, and tried it in local.
It works very well and IE never crash.
I am driving crazy!

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution?

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.

Skizofrenias wrote:
Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Wi-Fi or Bluetooth settings grayed out or dim

10.6.8 introduces several problem with mail, on one machine doesn't start on another it can't be seen from Safari, is that normal?

I don't what's going on with 10.6.8
Mail is suffering several problems.
first of all, I made all the standard routines... permissions, etc.
1) on one machine it starts, the dock icon is bouncing endless, and even forcing the index rebuilt, doesn't help.
2) on another machine, mail is not recognized by Safari, it is not there it says (My fear is that is Safari the problem? Strange)...
Do you have any other issue with Mail?

I have reinstalled the combo update, last night... The Mail app works ok on one mac, but is isolated, so no other app can send to Mail.app any email content.
Here you have the snapshots.
and this is the info.
I don't know what to do more... Shall I fill a bug report?

Severe problem with 'Drill to Related' using drill icon

Hi
I have a severe problem with 'Drill to Related' in Discoverer Plus (10.1.2.54.25) using the drill icon of a worksheet:
1. Though existing no items to drill to are shown in the context menu (or pop-up list), instead it says just 'Drill to Related...'
2. Clicking on menue item 'Drill to Related...' results in 50% processor load (permanent) and no further update of the browser window (IE 7.0.5730.11) containig Discoverer Plus. There is no recovery of that state within about 20 minutes.
This behaviour is both highly reproducible and annoying.
When using the drill dialog instead of the icon the expected items are shown and 'Drill to Related' works fine. Although that is a workaround I don't think it acceptable to tell the end-users to use it.
I searched metalink for a hint but couldn't find anything.
Can anyone help?
Franziska

Hi S
This seems to be a bug that was fixed earlier since we didn't experience it having applied cumulative patch 3 earlier.
Something might be said about your problem in Metalink
Doc ID: Note:422575.1
Subject: Drilling With Discoverer Viewer 10g (10.1.2) Using Internet Explorer 7 (IE7) Fails With Javascript Error
We still had to apply the patch for the bug I mentioned earlier in this thread in order to be able to see and select an item to drill to. Unfortunately the problem with the processor load up to 50% and nothing happening is still there.
By the way IE 7 is certified now according to the Oracle certification information.
Hope this helps
Franziska

Several problems continuous since first installing Firefox. Personal google search settings don't save; remember me options on web sites like Facebook aren't remembered; Youtube and Flixy videos don't play despite removing/reinstalling/upgrading Firefox s

Several problems continuous since first installing Firefox. Personal google search settings don't save; remember me options on web sites like Facebook aren't remembered; Youtube and Flixy videos don't play despite removing/reinstalling/upgrading Firefox several times; upgraded the latest flash plugin today, but no difference, symptoms are black play box with youtube and white box with Flixy. Disbale AV and antimalware makes no difference either.
== URL of affected sites ==
http://

I have a new problem with secondary web pages opening up without any action on my part other than simply moving the mouse pointer across the screen.

My old version of outlook express has several problems, will these be imported into a new thunderbird account

My old version of Outlook Express has gained several problems. It is time to change, will these errors be imported into a new Thunderbird account. I'm hoping that all would be well based on the belief that the two programmes are totally different.

You're not saying what problems you have with OE, so how should anyone guess?
There is no such thing as a 'Thunderbird account'. You do have an account with your email provider. You can use OE or Thunderbird to access that account.
But Thunderbird is not your email provider.

Several Problems with Visual Editor 1.1

I have installed the latest version of visual editor and also the emf and gef version required,the problem comes when i try to create a new Vsual class after i choose the property of the class such as name and so on and clicked finish My visual editor is empty.....the palette for visual component doesn't appear.
The visual editor creates a little window and duplicates it evrey time i click in the visualEditor page......please help me...i don't know what i have to do.... i tried the impossible but visual editr still doesn't work!

Mmm yes it's true, I have a virus checker on my computer...
and I have tried it twice to download WLS6.1 and always the same problem....so
I'll try again.
As for the last point (quick deploy of ejbs without compiling the classes)- Has
anybody managed to do it? It really could be helpful is somebody, who managed
to deploy a bean like this (without compiling) could post it to me, so I can examine
it...
You can mail it to [email protected]
Thanks
Francesco
David Felts <[email protected]> wrote:
It sounds like there is a problem with your downloaded version of the
installer.
Perhaps your download was corrupted by a running virus checker - we've
seen that
before. If you have a virus checker active, flush your browser cache,
turn off the
virus checker and reboot. Attempt to download again and run the install
program.
You should be prompted for the password and JDK 1.3.1 should be installed
on your
system.
Francesco wrote:
Hi all,
I have downloaded WLS 6.1 (NT /2000 version) but
I found several problems with it.
1) During the installation I'm not asked anymore
a password for my domain (feature or bug?)
2) The installation doesn't install jdk1.3.1
as required by setEnv.cmd. I have arranged the problem
pointing to my elder jdk1.3.0 that comes with WLS 6.0 but I don't knowif it's
correct this behaviour.
3) I have read in the docs that it's possible to deploy
EJB in a very quick way, without even compiling the classes.
So I have tried to pack the basic stateless Trader example
like this:
META-INF\
ejb-jar.xml
weblogic-ejb-jar.xml
examples\
ejb\
basic\
statelessSession\
Trader.java
TraderBean.java
TraderHome.java
TradeResult.java
But then I get only a Stack-trace full of exceptions stating that
<3-set-01 13.58.26 GMT+02:00> <Error> <Management> <Error deployingapplication
\config\mydomain\applications\basic.jar: java.lang.reflect.UndeclaredThrowa
bleException>
Is anyone aware about how to solve this problems?
Thanks
Francesco

N97 Wi-Fi Problems

I have just received my N97, and was wondering if anybody would kindly help with the following problem:
My N97 connects, no problem, to my home network, using wi-fi, however, if i attempt to open, any of the pre-installed apps ( i-player, Facebook etc) the N97 automatically attempts to connect via gprs.
I cannot find any settings, that allow me to change the app settings.
Please help.
Thanks.

Check this out.
Under Connectivity you will find a folder named "Destinations" where you will be able to setup multiple access points under one connections point. i.e mine defaults to a Connection point named "Internet" where I have 3 access points
WLAN
Orange Internet
Orange Java
I have prioritized em in that order so when my WLAN is out of range the phone should automatically search for the next priority access point in this case Orange Internet and if that ain't available then it should search for and connect to Orange Java.
After you set this up make make it your default access point for your browser and every other app that allows you to define an access point.
Hope this helps I'd advise you to download the User guide and read the whole "Connectivity" Chapter to fully understand this.
you can it here
http://europe.nokia.com/get-support-and-software/product-support/n97/guides
Hit Kudos if I Helped out.
Nokia 3310-> 8810->N95->N95 8Gb->
Nokia N97 Black v21.0.045 RM-505 Code-0585162 (handset No 3)

Here are some extremely severe problem of lumia

There are several severe problems have not solved by nokia. One of these important things mentioned by customers was "Data Sense". This is an important feature for all of the customers, to know how much data they used. In addition, there is a link talked about that
http://discussions.nokia.com/t5/Nokia-Lumia/How-can-i-get-Data-Sense-or-Nokia-counter-from-WP8-Store...
said the problem has been solved. However, there is no solution.
Some one just said it is depending on carrier and nokia take no responsibility for that... Why Nokia hold this attitude to your customer? Are there any solution you can give us? The store even has no similar software for that.
I don't want to mention there are so much functions are locked, and we have no choice to do it by ourselves. Could I change the system to other countries to solve those problems? or give us a schedule but NOT "later" or "at the end of year" how and when this company unlock those functions for their nokia follower

You think it's important to 99% of Windows Phone users but seeing how this issue is hardly ever brought up and generally if it does the same bunch pops in to comment it's more likely to be a single digit number if that.
Would data monitoring be useful? certainly, especially where unlimited or affordable large data plans are rare.
Is it a dealbreaker? hardly, at least not in general.
Do I think Nokia should provide the previously available tool for WP8? Yes they should
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

After update, several problems (battery, factory recovery, Message icon)

After Froyo update, I found out several problems.
1) Battery.
It drains two times faster than before. My one does. My wife's one is worst (maybe 3-4 times faster and also the phone is hotter than mine).
2) Factory Recovery option
I could not find any factory recovery button from mine and wife's.
3) "Message" icon
My one has no "Message" icon. It has just three icons "Pone/Contacts/Applications" at the bottom of the screen.
But my wife's has all four icons "Phone/Contacts/Message/Applications"
I don't know how to correct these.

It sounds like most of your issues can be found by doing a factory restore on the phone. Settings>privacy>factory data reset. The icons are customizable. Press icon to bring up all icons. Touch and hold on the icon you want on the main screen. You can touch and hold on a blank spot on home screen to add a widget.
As for battery issues, the issue has been escalated to Samsung, and we are working with them to get a resolution as quickly as possible.
Let us know if that helps out!

N97 many severe problems

Similar Messages

Maybe you are looking for