N97 - Maps 3.04 - difficult to create a multi-poin...

On the face of it, the fact that Maps 3.04 can allow a multi-point, ordered route to be created is a good thing. However, I find building such routes to be difficult, particularly where they involve a mix of places stored as Favourites and places from the map.
If I start from Favourites and add a point from there, then try to add one from a search, what happens is not a "free" search but a "nearest per category" list - not always any good for what I actually want.
I can sometimes add point from a search or the map first, but I am not finding the interface particularly intuitive.
Can anyone advise me how I might form routes of this type more easily?

Exactly, is very bad.
Imagine that you have save your a favourite route and then you want to modify it using only your phone, for exemple adding a new point.
Then when you select the add anew point it doesn gives you the possiblity of adding a point from the map wich is really bad. Instead , it offers you
the category list that pmrtvcom mentioned aboved. Really annoying.

Similar Messages

  • Form that is a map of Ohio. I created layers for each county so I can click and it highlights, but I need to be able to click more than one. How do I do that?

    Form that is a map of Ohio. I created layers for each county so I can click and it highlights, but I need to be able to click more than one. How do I do that?

    Looks nice!
    I understand what you've done now. You used the "Set Layer Visibility" command which sets the on/off state of all the layers at once. What you need is a more subtle approach, one that will only change the state of the specific layer associated with the button, not the rest of them (so that you could have multiple layers enabled at the same time). The way to do that is by using a script.
    I wrote the script for you and applied it to the top-left counties (WILLIAMS and FULTON), in the attached file. You can now copy the actions I associated with those buttons to the rest of them, and it should work as you want it to.
    The file: MAP-HHA-Geographic(3)_edited.pdf - Google Drive

  • How to create a multi select drop down filed in crm 7.0

    Hi All,
            I need to create a multi select drop down field in crm web ui where one field have 7 value and we can select more than one value at a time.I have no idea how to create a multi select drop down field in web ui.
    Please help.....

    Hi vishwas
    Please follow the thread where a similar requirement was posted.
    Re: Drop-down list box / pick-list with multiple selections at a time
    Here the suggestions say that a workaround could be to associate a table view to the field.
    Regards,
    Nisha

  • How do I create a multi-page doc / add blank pages in PSE 11?

    I am creating printable PDF files and up to yesterday I was using a free trial of PSE 10. To create a multi page document I first saved it as a PSE project file, then added blank pages, then when I was done I saved it as a PDF and voila - done!
    Now my trial has run out I have bought the paid version (which is now version 11) and I seem to have lost that option entirely. The product is useless to me without a way to create multi page PDFs - can anyone help?
    Alternatively can I downgrade back to PSE10 which was fine for me!
    Thanks

    Thanks - I just spent an hour online to support, they won't refund me until they can work out why it won't allow it in the new version?!! So they have shared my screen and taken my files to be worked on "at the next level" - there didn't seem to be an option to accept that this feature just wasn't available in the version 11, they kept trying to make it do it. Especially as they could open my multi page projects created in version 10 and add pages to them!
    Anyway, I would be open to using another free software MichelBParis, but I found it such a steep learning curve to figure out how to do it in PSE10, it would need to be simple. Do you have links to any you could recommend?

  • How can I create a multi-line combo box?

    I am using Adobe Acrobat Pro 9 and I am trying to create a multi-line combo box on my fillable form.  At the bottom of this form/letter I would like to have a several paragraps that the user can choose from, but it's only allowing me to enter one line at a time.  Any help??

    Hi, Did you find the answer to this? I'm looking to create a combo box with multi-lines

  • Creating a multi-language website on Dreamweaver-cs4

    Hi,
    What would be the best aproach to create a multi-language website ( max 10 html pages , not a portal ) on CS4.
    I had Joomla in my mind but I want to learn Dreamweaver way.
    Should create different folders for each  additinonal language and copy the default files  and edit them accordinly? ( Default will be English, Turkish and German might be other options )
    Thanks a lot

    Watch for site management issues.
    Here's a good reference: http://www.adobe.com/devnet/dreamweaver/articles/ora_dw_cs4_mm.html
    You might have a home page that appears in all languages, linking to each section of your site. Each section might be in a folder named like "IVFDeutsch" for the German version, etc., and the 'home page' for German could be www.yoursitename.com/IVFDeutsch/index.html so you would have an index page in each subsection.
    Consider using Templates, and a nav for each section that is presented in the language of the section, to treat your other language speaking visitors as well as possible.
    You have many decisions and possibilities..have fun with the site.
    Z

  • HP 2540 scanning to create a multi-page pdf (Mac OS X)

    My printer/scanner is: HP 2540  
    My OS is Mac OS X 10.10
    Need help with the following:
    How can I scan single pages (an old tax return) to create one multi-page PDF? I saw a reply on how to do it in Windows, but not using OS X. Any assistance would be appreciated as I need to get this done for legal reasons.
    This question was solved.
    View Solution.

    Hello @txrun ,
    Welcome to the HP forums.
    I understand that you would like to scan multiple pages into on PDF document.
    I would like to help.
    It really depends on how you are scanning.
    Are you using Apples Image Capture or HP Scan?
    If you are using HP Scan, it should be quite simple.
    Scan the first page.
    You should have a preview of the page on the left hand column of the window.
    You will also have a little plus sign found at the lower left hand corner of the window.
    Change the page on the scanner glass then click the little plus sign.
    If you are using the Apple Image Capture, you will have to change the format from JPEG to PDF.
    This will cause a little box to appear under it, that will say 'combine multiple pages into single file'
    Check this box and proceed to scan.
    Hope this helps you.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • How to create the multi-realm (or multi-entries)in one Directory instance?

    how to create the multi-realm (or multi-entries)in one Directory instance?
    I have installed a new iplanet Directory Server 5.2 on a win2k box, named "vp.com1.com"
    When I installed this server, it helped me to create a new Directory server instance with the default realm "dc=com1,dc=com".
    I could log on console and found root node, which is "com1.com"
    expanded this root node, I got a tree as following:
    "com1.com" -> "vp.com1.com" -> "server group" -> "Directory Server(VP)"
    Then open "Direbory Server(VP)" -> click tab "Directory"
    Got a tree as following:
    vp.com1.com(389) --> dc=com1,dc=com
    o=NetscapeRoot
    Now I wanna create a new entries, which is "dc=com2,dc=com"
    How to do?
    I had checked almost all the related doc but failed to get the valuable info.
    Would you like to do me a favour? Or forward me some reference?
    Because I'm a new guy for iplanet Directory Server, would you pls me the help in detail.
    This task is very urgent for me, so really appreciate your early help!

    Look on page 87 of the Sun ONE Directory Server 5.2 Administration Guide. The section "Creating a New Root Suffix Using the Console" should give you step-by-step instructions.

  • How to create a multi-line table/column comment

    Can someone tell me how to create a multi-line table or column comment?
    Apparently, the concatenate operator (||) does not work with the COMMENT statement.
    I've searched the Oracle manuals and couldn't find an answer.
    COMMENT ON TABLE sometbl IS 'i would like to break up this comment into several lines in order to improve readability'; Effectively, this is what I'd like to do (but it doesn't work):
    COMMENT ON TABLE sometbl IS
      'i would like to break up ' || CHAR(10) ||
      'this comment into several lines ' || CHAR(10) ||
      'in order to improve readability' || CHAR(10); Oracle version is 10.2.0.4

    Why not just
    SQL> create table t (a int)
    Createtable successfully completed.
    SQL> comment on table t is 'i would like to break up 
    this comment into several lines 
    in order to improve readability'
    Commenton successfully completed.
    SQL> select * from user_tab_comments where table_name = 'T'
    TABLE_NAME           TABLE_TYPE  COMMENTS                               
    T                    TABLE       i would like to break up               
                                     this comment into several lines        
                                     in order to improve readability        
    1 row selected.?

  • Can I create  a multi-selection list using a dynamic list of values?

    I'm reading section 19.7.3 from the dev guide - it explains how to create a selectOneListbox using a dynamic list of values. Is it possible to create a multi-select listbox from a dynamic list of values?
    What I would like to do - I have a read-only view object with a hard-coded query - I would like to display the results of the query in a dropdown list box, or dropdown list box with boolean checkboxes, to allow the user to select multiple items from the list. How can I accomplish this?
    thanks

    Hi JavaX,
    I don't know of any JSF components (at least not any ADF Faces components) that lets you do multiple selection in a drop-down. There is an af:selectManyListbox, but it does not render as a drop-down.
    John

  • How to create a multi-language site?

    Hi,
    what's the smartest way to create a multi-language site with the naviation menus only in English OR French OR German…? By creating one site and duplicate the .muse file?
    Thanks a lot!

    No
    Depending on how simple your site is you can get away with it easy with common languages based on latin all in CSS and Javascript as the words within the sentences will mostly be in the same places. For other languages such as Japanese to English or right to left languages you would be better building different templates in a subdirectory as links and other things will start to move around.
    You also have to design around multi languages as well, as words in other languages might be longer and could break your design.

  • When creating a multi page document, some of my thumbnails become linked and can't be separated for editing. What am I doing wrong and how do I correct this?

    When creating a multi page document, some of my thumbnails become linked and therefore impossible to rearrange. What am I doing wrong and how do I correct this?

    The pages in sections stick together because the text flows between the pages.
    Insert a section break to isolate pages between sections.
    Now this all works in Pages '09, unfortunately Pages 5 doesn't let you.
    Peter

  • I am trying to create a multi provider from 3 ods?

    hi all,
    I am creating an multi provider from 3 ods. how do i got about in creating dimensions using ods. Can anyone let me know how to create dimensions using ods.
    regds
    haritha

    Dear Haritha,
    You can create dimensions.But you will not be using these dimensions while running query. As you know multi provider doesn't hold any data.
    When you create multiprovder using info cubes.While running query based on multi provider in turn it will use info cube's dimension...
    As there will be not be any dimensions in ODS.
    So while creating Multi provider based on ODS only, you need to create "ZXXXX" dimensions.. just for the sake of creating the dimension ...because if you dont create dimensions in will not allow you to create MP.
    Regards,
    Viren.

  • Advanced table to create a multi-record data entry page

    how to use advanced table or table OAF features to create a multi record data entry page ?
    there will not be any master or header region. Only a multi-record detail region for creating records.

    Hi ,
    There is no such "multi-record detail region" , you can illustrate Master detail in OAF by creating the region in following order .
    1 ) Page Layout region
    2 ) Any header region(eg - message component layout etc ) - for entering and saving header level records .
    3 ) Advance table - for entering and saving the line level records ( with add another row feature ) .
    Thanks ,
    Keerthi

  • To Create a multi provider

    HI guys can  you please help me with the steps to create a multi provider using
    PCA: Statistiscal Key Figures       0PCA_C02
    PCA: Transaction Data                 0PCA_C01
    There is no standard bussiness content multiprovider for this.
    Thanks
    K.Mohan

    Dear Mohan,
    For creating a Multiprovider first you have identify what key figures you want to see and what characteristics are common in the both the infocubes , and then create a MP , with the two cubes, select the characteristics and key figures , then maintain the dimensions , Maintain the Indentification ( in the sense the common characteristics , how they should be picked from the base infoproviders ) and the last step is to select the key figures , from which target they should be picked in the query. if you require from both , select from both and maintain the restriction in the query with the help of infoproviders..
    Hope it Helps..
    Thanks.
    Krish

Maybe you are looking for