N97 mini can't recognize m4a file?
I had my n97 mini updated to the lastest software. I used nero to make a m4a music file (the encodec is eaac+, that is, HE-ACC v2) and transfered it to my n97 mini, via ovi suite sync.
Then I found that I can't play it in the music application: It just can't find the file in the music library. Though I can use it as a ringtone (or a alarm clock sound) and it can be played normally.
Could anyone shed some light on this?
Yep, I checked everything you mentioned and it was all set as you suggested. But I took the battery out and left it for a min., restarted and it now isn't connecting through WiFi, result!! It was a very odd one this problem, thanks for the info........as far as Homescreen Options go I've gone to the Help option and it states "The available options may vary" which might explain the differences between handsets.
Again, apologies for cross-posting but has anyone found a way ot update the firmware with Code: 0591336 (Voda branded)? Nokia website states firmware to be 11.0.*.*.* but via Software Updater and also Ovi Suite it's only showning 10.0.*.*.* I do know Vodafone have released their branded version of this update but it still updates through Software Updater so I'm back to square one.....any thoughts?
Similar Messages
-
My N97 mini can't find BH-214 when I'm trying to pair them up.
Those folders are protected by the operating system.
They cannot be accessed unless you hack the phone, which is a warranty-voiding operation that cannot be discussed here.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
When I try to add m4a files in itunes it did not add it. Please help how can I add m4a files in itunes.
Further info: my housemate just drop-boxed (mac to mac) a few of his albums that work fine in his iTunes and the same thing, they'll show in a playlist with their correct details but not in the main library. iTunes is definitely processing after I add them, and they are definitely not corrupt (shown MP3 scan +repair) - I've attached a couple of pictures to clarify.
Please help! I'm a bit OCB about my music being organised correctly I'll admit! -
N97 Mini can no longer be found on iPhoto.
hey, will some one kind enough to sort me out this ' dreadful problem , my N97 mini has been working fine with iPhoto, getting images/ videos off my phone, now when i plug it in, i click Mass storage and nothing on iPhoto changes, everything else works like finder, because the folders on the desktop, but i dont no what's happened, the only thing changed from other times is i have recently upgraded to snow leapard but i dont see how that could be the problem.
If you had iTunes set not to copy added recordings into its own library, then the files might be anywhere and justreferenced in iTunes. Only you could know where you put the originals, but if careful searching doesn't find them that suggests they've been deleted.
If it did copy the files but you have deleted the library from your 'Music/iTunes' folder then the songs are gone. Again, if searching produces no results then the songs would appear to be missing from your computer.
With no backups, and the songs deleted, they are lost. 'iTunes in the Cloud' might enable you to re-download songs you had purchased, but I doubt this works on Leopard, which your signature says you have. -
MS Project can't recognize this file format...
At work, I still have Project 98. When I try to open
an .mpp file, the following message appears:
"Microsoft Project cannot recognize this file format.
Do you want to open this file as text only?"
I've been assured it has been saved "down" to Project 98,
and in the Windows Explorer, it shows it is saved as .mpp;
Microsoft Project 8.0 Project. A user who has the Office
XP version states he's receiving the same message.
Can anything be done to restore this file?MPP Repair Kit is a project management tool created by Microsoft and included in the MS Office suite. This tool can repair corrupted Microsoft Project (MPP) files and recover their content, or recover these
files altogether when they were lost, deleted or damaged because of various reasons.
Link to download its demo version:
http://www.mpp.repair/
OR ALTERNATIVE ACTIONS
Do the following:
1. Launch Microsoft Project Professional and log into Project Server
2. Open the project in question
3. Click File – Save As – Save As File
4. Save the project as an .mpp file
5. Log into PWA with administrator permissions
6. Click Admin – Clean Up Project Server Database
7. Delete the project and its associated SharePoint subweb
On the new Project Server instance, do the following:
1. Launch Microsoft Project Professional and log into Project Server
2. Click Tools – Enterprise Options – Import Project to Enterprise
3. Import the project
4. Click Collaborate – Publish – All Information
5. Click Collaborate – Publish – Republish Assignments
6. Select the “Overwrite actual work entered by resources” option
7. Click OK
Visit next source:-
http://www.filerepairforum.com/forum/microsoft/microsoft-aa/project/106-%E2%80%8Bproject-files-keep-getting-corrupted-and-i-can-t-open
Hope this helps. -
Screen saver can't recognize .jpg files in photo folder
I just upgraded my iMac G4 (power PC) from OS X 10.1.3 to OS X 10.4.8 and am having a serious problem with my screensaver (I guess serious is a bit blown out of proportion since for me it is a fancy feature to show off family photos). I know where to look to find my own picture files. And thankfully I don't have the problem of not getting the option to choose my own file like I noticed others have had. But when I go to my pictures file in my home, the screen saver just doesn't recognize picture file formats (I've tried .jpg and .pdf). The files are there in the list, they are just listed in grey and not selectable. Thus the screensaver is black and says in white writing that there are no pictures in my file. I'm stumped. Any help would be appreciated. Thanks!
iMac G4 Mac OS X (10.4.8) recently updated from 10.1.3I know you don't select individual photo files for the screen saver, but when I pick a folder (that contains photos recognizable by preview or iphoto) that is in my "photos" file in my home, the screen saver does not recognize that there are any photo files in it. And by the way, downloading new .jpg files from my camera in my new OS X 10.4.8 did not solve the problem. The strange thing is that the "desktop" program can see the files (both old photos that were created in OS X 10.1.3 and my newly created files). Weird and annoying!
-
N97 Mini can't get a GPS fix on Ovi Maps but insta...
Yeh, well I got my N97 Mini yesterday and it instantly fixes on a satellite on Google maps but when I try Ovi maps or the positioning app (Menu> Apps> Location> GPS Data> Positioning), it doesn't connect at all! I'd really like to be able to use Ovi so what can I do?
-HR.
N97 Mini- RM 555- v11.0.045
Solved!
Go to Solution.Google maps uses the cellphone mast and the internet to determine your position, apart from the GPS on your device.
On Ovi Maps or Positioning app, have you configured it to have A-GPS activated? Furthermore, Google Maps is fast in getting a "map" because it only downloads maps on the fly, of maps of the area on screen, while Ovi Maps is trying to download the maps for an entire country.
Go to Menu>Apps>Location>Positioning>Positioning Methods. Make sure you have A-GPS and network based turned on (you can use it turned off if you want, but turning them on will make the initial fix faster). In Positioning Server, make sure that the server address is supl.nokia.com, and the access point is defined.
The first ever fix from a phone can take anywhere from 5min to 45min, depending on various factors. Also, make sure that you have downloaded the maps for your country into your phone.
If you find my post helpful please click the green star on the left under the avatar. Thanks. -
Adobe DNG Converter can't recognize any files
Hi All!
I'm new here and would very much appreciate help.
I am running a Mac OS X 10.04.11 and would like to open .CR2 files (native file from my Canon 500D) in PS4 / Bridge CS4. My problem is that although I have downloaded the Adobe DNG Converter and Camera Raw 5.1 update as described here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4057, the DNG Converter can't recognise any files at all (they are greyed-out when I go to select any folder). I also followed these steps from the aforementioned link (well at least I hope I did it right, I found the reference to step 4 slightly confusing):
To install with Adobe Creative Suite 4 or Photoshop CS4:
Automated installation on Mac or Windows®:
1. Select "Updates..." from the Help menu
2. Follow the on-screen dialogs to download and install the latest available Camera Raw update
Manual installation on Mac:
1. Exit Photoshop CS4 and Adobe Bridge.
2. Open the Finder.
3. Navigate to the root of the local disk (not the user's home folder).
4. Navigate to: (Please read directory carefully)
Library/Application Support/Adobe/Plug-Ins/CS4/File Formats
5. Move the existing plug-in to another location (for example, a new folder on your desktop). Ensure you keep this version in case you need to revert back.
6. Copy the Camera Raw plug-in, Camera Raw, from the download into the same folder as in Step 4.
7. Launch Photoshop CS4 or Adobe Bridge.
Is that version the right one for CS4?
Only Finder and the Canon Software can preview my .CR2 files, Photoshop still gives the message: "Could not complete your request because Photoshop does not recognise this type of file." and Bridge only shows me a generic RAW thumbnail. This message also appears in PS when I double-click on the Camera-RAW.plugin. I also restarted my computer, but that didn't fix it.
Can anyone help me out please? I'd urgently need a solution.
Thanks in advance!I now uninstalled the older 5.1 version and instead installed the DNG Converter 6.3 separately and it works perfectly.
About the Camera Raw 5.6 update: I also downloaded the plug-in (which I think should be the last version CS4 supports) and can now open my .CR2 files in PS, Bridge previews them too. :-)
Is it advisable to keep both, .CR2 as well as .DNG files? Why is it that my .DNG files are lighter than the native .CR2?
Thanks again! -
Can't recognize music files on nano
when i plug in my nano to my computer it says that it cannot recognize any files on the nano and that i need to use the ipod updater to do a factory reset.
I tried a factory reset...a manual reset....and updated all the programs on my computer. I don't understand because my nano worked for the first couple days when i brought it home and suddenly it has no files on it and won't recognize it when i plug it in.
The icon shows up on the desktop, but not in iTunes.
anyone with the same problem?If you leave iTunes up all the time, you should probably quit iTunes. I've noticed that when iTunes had chosen not to recognize one of my iPods, nothing I do will change that until I quit out of iTunes. Sometimes iPods get "lost" due to preference corruption. Quitting iTunes or rebooting the computer will usually take care of that.
Doc -
Nokia 5800: Does not recognize M4A files with uppe...
I use linux, and when I recently copied over two M4A tracks (I did not realize they had UPPER case extensions), they were not recognized during library refresh and did not show in the Music Player application. They did show in the File manager. Windows cannot rename such a file to .m4a, and neither can the 5800. The workaround was to rename the file to a bogus or no extension and then rename it to .m4a lower case.
This is probably a bug since the music player should be file name case insensitive.Iḿ desperatly looking for a way to sync my Nokia 5800 under linux. Did you find a way? So far I once had a contection thrugh multisync but it ended with errors and i didn find any data transfered.
It is time nokia comes with Ovi or Pc Suite for linux ! Currently when I google on the subject I get a lot of tech talk and failures no clear working sollution. Can you help!? -
Can't recognize movie files.
My girlfriend made a video on iMovie and sent it to me through email and I am having a problem opening it be ause it is saying the movie's file can not be recognized by QuickTime player. What do I do to make it work?
My girlfriend made a video on iMovie and sent it to me through email and I am having a problem opening it be ause it is saying the movie's file can not be recognized by QuickTime player. What do I do to make it work?
-
Nokia N97 Mini Can't Open Photos
So I downloaded the latest version of Nokia Photos from Ovi Suite today. When I unplugged it from the laptop, I found that I couldn't open my photos in albums, captured or months. I double tap it but this doesn't do anything. Please Help! Is there a way to uninstall this latest version of nokia photos and go back to my older version because that was working fine.
Thank You and much appreciatedThanks for your valuable reply as I am facing the same problem of the installed applications not opening in both my phones N 97 mini and the nokia 5800 xpress music I did not know that the micro sd card also has got classes. I buy my phones and the micro sd card from nokia priority dealer absolutely genuine, and this is news to me that micro sd card also has classes. I have downloaded 110 appllications from the ovi store in each of the above mobiles. So now I know that my micro sd card is not upto the right class. Now can you please please let me know how to get the high class micro sd card which supports 100s or thousands of applications and how much does it cost and how do I know the class of the micro sd class, where is it written on the card packing? Who makes these cards. I know of only Kingston company andone more is there cant remember the name. Could you tell me the details of the micro sd class of top most class card which supports the maximum number of applications and what is its cost, and how do I identify it?? Thanks Nilufer. Could you please reply me on. Thanks
-
IPhone can't recognize .docx files create with Mac Word 2008
iPhone will not recognize .docx attachments created using Mac Word 2008. It will recognize .docx attachments created in Word 2007 (Windows).
Please advise?This is easily reproducible. I have spoken to Technical Support at Apple. It has been escalated to the Development team. They are working on it. I expect to hear back from them in a couple of weeks.
I think that it is interesting to see few complaints about this problem posted anywhere. It speaks to the fact that the docx format is not adopted as widely as one would presume. We're going to have to stick to compatibility mode (i.e, doc not docx) until Apple fixes the issue.
Have a nice day. -
Target "start replicat rep_1,aftercsn x" rep_1 can not recognize trail file
SOURCE db: ORACLE10.2.0.5
SOURCE ogg:
Oracle GoldenGate Command Interpreter for Oracle
Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO
Linux, x64, 64bit (optimized), Oracle 10g on Apr 23 2012 07:30:46
TARGET db:ORACLE11.2.3.0
TARGET ogg:
Oracle GoldenGate Command Interpreter for Oracle
Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO
Linux, x64, 64bit (optimized), Oracle 11g on Apr 23 2012 08:32:14
The exttrail from SOURCE has RYNC to target succeed
[oracle@p49drzdb dirdat]$ pwd
/home/oracle/ogg/dirdat
[oracle@p49drzdb dirdat]$ ll
总计 754664
-rw-rw-rw- 1 oracle oinstall 99999964 05-23 18:31 r1000024
-rw-rw-rw- 1 oracle oinstall 99999731 05-23 21:01 r1000025
-rw-rw-rw- 1 oracle oinstall 99999856 05-23 23:14 r1000026
-rw-rw-rw- 1 oracle oinstall 99999949 05-24 02:16 r1000027
-rw-rw-rw- 1 oracle oinstall 99999817 05-24 08:12 r1000028
-rw-rw-rw- 1 oracle oinstall 99999870 05-24 09:52 r1000029
-rw-rw-rw- 1 oracle oinstall 99999747 05-24 12:33 r1000030
-rw-rw-rw- 1 oracle oinstall 71954497 05-24 14:17 r1000031
[oracle@p49drzdb dirdat]$
When start rep_1 then cat ggsevnt
2013-05-24 13:57:14 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (oracle): delete replicat rep_1.
2013-05-24 13:57:19 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (oracle): add replicat rep_1 exttrail /home/oracle/ogg/dirdat/r1.
2013-05-24 13:57:52 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (oracle): start replicat rep_1 aftercsn 594540101.
2013-05-24 13:57:52 INFO OGG-00963 Oracle GoldenGate Manager for Oracle, mgr.prm: Command received from GGSCI on host p49drzdb (START REPLICAT REP_1 AFTERCSN 594540101).
2013-05-24 13:57:52 INFO OGG-00975 Oracle GoldenGate Manager for Oracle, mgr.prm: REPLICAT REP_1 starting.
2013-05-24 13:57:52 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rep_1.prm: REPLICAT REP_1 starting.
2013-05-24 13:57:52 INFO OGG-03035 Oracle GoldenGate Delivery for Oracle, rep_1.prm: Operating system character set identified as UTF-8. Locale: zh_CN, LC_ALL:.
2013-05-24 13:57:53 INFO OGG-01815 Oracle GoldenGate Delivery for Oracle, rep_1.prm: Virtual Memory Facilities for: COM
anon alloc: mmap(MAP_ANON) anon free: munmap
file alloc: mmap(MAP_SHARED) file free: munmap
target directories:
/home/oracle/ogg/dirtmp.
2013-05-24 13:57:53 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rep_1.prm: REPLICAT REP_1 started.
REP_1 has started succeed ,but was not the CSN I put
GGSCI (p49drzdb) 50> info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT_2 unknown 21:52:29
EXTRACT STOPPED PUM_2 00:00:00 21:53:12
REPLICAT RUNNING REP_1 00:00:00 00:00:01
GGSCI (p49drzdb) 51> info rep_1
REPLICAT REP_1 Last Started 2013-05-24 13:57 Status RUNNING
Checkpoint Lag 00:00:00 (updated 00:00:05 ago)
Log Read Checkpoint File /home/oracle/ogg/dirdat/r1000000
First Record RBA 0
Edited by: 997659 on 2013-5-23 下午11:20
Edited by: 997659 on 2013-5-23 下午11:23if you provide aftercsn for starting the replicat , then the replicat process will start the position after the csn, where the next transaction is placed.
If you provide atcsn, then the replicat process will start the positione exactly the same. -
N97 mini: Can't transfer music with ovi suite!
Someone please help! every time i try and transfer music with ovi suite it says "can't read tracks" anyone know how to fix this?
Solved!
Go to Solution.Depending on how much time you want to spend, there are a couple of methods. Before putting music on phone, get it up in Windows media player, then drag and drop album art onto the album picture at left hand side of screen. Then right click on a track and select advanced tag editing, and click pictures, the photo you drag and dropped should be there. If you want individual pictures for each track you can add from here ( but you would need to do this on phone also.
On the phone select an album, select options, select album art, select change, pick a picture (the album cover) select ok, ok wait and thats it. You also have album art choice in the options of each individual track, but will need more photo's in gallery to use different ones.
Good Luck
ps Kudos is quite a cheap comodity !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'
Maybe you are looking for
-
I just bought my daughter a 5th gen Nano. We share a family computer. How do I create her own library on our computer? iTunes has already associated my library with her Nano. She has her own iTunes login - there must be same way to keep our accounts
-
Since I have a new iMac and now use Mountain Lion, I am observing that TV shows purchased in iTunes sometimes download in a Quicktime format that will not open in iTunes. In some but not all cases, I right click "open in" and select iTunes and then
-
Newest itunes update wont load 2-22-06
I downloaded the newest update for itunes and now it will not open. Tried restarting. Tried deleting the program completely and re-installing using the disc that came with my nano and still....it will not load when i double click on it. What can i do
-
Hi. I'm developing an enterprise app in Xaml where I capture a signature using the InkManager control in windows 8.1, the user can print the document from the device just fine with the signature, but the document is sync back to the server and from
-
Hi, Lets pretend I have a web page that renders data contained in several java beans. The java beans were filled with data queried from a database. There are several forms on the page that might be posted. These forms will call code that modifies dat