N97 mini won't save wep key

when setting my n97 mini up to connect via wireless it doesn't remember the wep key and asks for it every time I try to connect - how can I get it to save it?

Then you both need to look at this thread.......
/t5/Software-Updates/quot-Internal-module-error-qu​ot-in-NSU-fix-offered-here/td-p/88351
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Similar Messages

  • N95 won't save WLAN key when different sim card is...

    Hey guys just wondering why my N95 won't save WLAN key when different sim card is inserted. Any ideas?
    Cheers
    Clark Kent
    Its not who i am underneath. But what i do that defines me.
    You are here for a reason Superman.
    "Come to me son of Jor-EL. KNEEL BEFORE ZOD"

    Its ok. Just had to define it. Sorted
    Its not who i am underneath. But what i do that defines me.
    You are here for a reason Superman.
    "Come to me son of Jor-EL. KNEEL BEFORE ZOD"

  • Won't save WEP code

    My new iPod Touch works great, but wondering if I m missing something with the WiFi connection?
    I put in my WEP key from my wireless 2wire AT&T router - works fine. But if I go to someplace with WiFi (like McD's) for instance and check my email, when I return home the iPod ask for my WEP everytime! Is there a way to lock my home WEP code so I don't need to do this everytime I use WiFi some place else?

    In my experience, WEP doesn't play nice with Apple products. You may not like this suggestion, but change your router's security to WPA or WPA2 and you probably won't have this problem (and WPA is much more secure than WEP anyway).

  • WVC54GCA setup won't take WEP key

    Hi - I'm setting up this Linksys WVC54GCA Wireless-G Monitoring Camera and can't get it to take my WEP settings.The setup screen says, after you select 128 bit WEP, to leave the passphrase field empty and enter the WEP key on the next screen. When you hit enter you get an error saying that the WEP key should be 26 digits and and you cannot continue!
    If I turn WEP off and do it without security it all works fine, so how am I supposed toenter the WEP key? Seem like a bug. Endless loop!
    hanks
    Mike

    Hey just had the same problem as you and found the way around it.  It looks like the Wizard has a bug in it that you have to use the Pass phrase not the pass key. 
    The way around it is to use the web interface, use the IP address that has been assigned to the camera as the web address in your browser, you can see this in the wizard or on your wireless router.
    all the settings to manage the wifi can be found there, you need to use that area to manage everything else for the camera anyway.
    You may need to reset the camera, there is a little button under the camera, use a pen and hold it in for a slow count of 10.

  • Cisco E1000-Won't save WPA key number

    I have a new wireless router which I have hooked up successfully to 3 computers , a playstation, and a WII on a secure network.  My fourth computer refuses to save the new key.  Ii keeps defaulting to an 8 digit number.  It shows the secure network on availiable networks but won't accept the WPA key.

    What is the Operating System that you are using in the 4th Computer… Try to manually add a network in the Computer… If still doesn’t work then you have to reduce down the Security Mode…

  • N97 mini won't install Farm Frenzy

    I just bought Farm Frenzy and have tried to download it 8 times but everytime the download finishes it says installation fail. How do I a) fix this or b) get my money back

    Then you both need to look at this thread.......
    /t5/Software-Updates/quot-Internal-module-error-qu​ot-in-NSU-fix-offered-here/td-p/88351
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • N97 mini key lock problem

    Hi there NSeries experts!
    I couldn´t find a topic related to my question,
    so here´s my post:
    I´ve got a little problem with my N97 mini
    (type "RM-555" software-version: "11.0.102"):
    The key lock button at the side of the phone
    does not work properly in my eyes.
    Sometimes - yes, it does not show up every
    time you use it, only in about 50 % of usage -
    when you use the button it works "back and
    forth". That means, if you wanna lock the phone
    it gets locked and then directly unlocked again,
    although the button has only been used once.
    Same thing sometimes the other way round:
    The phone is locked, the button is used, the
    phone unlocks and directely locks itself again.
    It is not the worst bug I can imagine but after
    a while it is quite annoying.
    Does anyone have an idea what this is all
    about? Do you think it is more likely some
    hardware defect or rather more a software
    bug?
    Thanks for any help!
    If you need further Info about the phone,
    software etc. just tell me...
    Tom.

    Then if you want to try everthing before going to nokia, first try reset *#7370# , backup your data first. Still no success? Reflash with same firmware version via NSU. (back up your data in both cases)
    Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
    Current Phones: Nokia N9, iPhone 4

  • N80 WiFi - WEP key doesn't save after upgr to 4.06...

    Upgraded my N80 i-net version to latest firmware 4.0623.042 & since then WEP key set up in Access Point doesn't get save. I get asked for WEP Key every time I try to access WLAN. Anyone having same issues? WiFi access was working fine prior to upgrade.
    Thanks in advance
    Vic

    Just an update to this
    Thanks to a comment on another post I noticed I was able to start iTunes by right-clicking iTunes on the Start menu and select Run As Administrator.  This seemed to work fine, but still I could not run without doing this afterward.  Note: I'm already an administrator, and I don't fully understand the difference.
    Anyway, I have decided to uninstall 10.4, reinstall 10.3, and reinstate the 10.3 library.  All works fine now, so I suspect something is not quite right in 10.4.
    I should have taken the 'If its not broke, then don't upgrade it' approach. I get too complacent sometimes...

  • What is a WEP key and how do I find mine?

    I'm trying to set up my Wi-Fi connection for my Nintendo DS, and in order to do so, I must enter my WEP key, however, I honestly have no idea what that is, or how to find it. I'm currently using a model wrt54gs v. 4

    Try these steps to get the network key from the router. Open
    an Internet Explorer browser page.In the address bar type - 192.168.1.1 Leave username blank & in password use admin.Click on the Wireless tab. Now Click on the Sub tab under Wireless > Wireless Security.
    Check the security mode and security key .

  • Windows won't remember my new WEP key?

    Every time I go to log on to my ssid it has my old network key. SO I enter in my new network key and it doesn't not take it.
    My connections show are shown to be working and at a high rate but I can't get by browser running?
    BTW I using a Linksys WRT54GS router from my desktop to my laptop via a cable connection. I had the system running fine but I changed the WEP Key recently and now it's no longer running.Message Edited by jakethesnake on 11-17-200611:58 PM
    Message Edited by jakethesnake on 11-17-200611:59 PM

    Sorry, but it is not fully clear what you are doing and what is happening exactly.
    Do you have Windows XP?
    Do you use Windows Zero Configuration or a laptop specific software for the wireless connection?
    How do you know it still has the old network key?
    How do you know that it does "not take" the new key?
    What do you mean exactly when your connections are shown to be working?
    If the network key is incorrect the wireless card should not be able to connect. Thus you don't have a working connection. Instead the wireless connection icon in the tray should show a red cross to indicate that it is not connected.
    Also, when changing the network settings, I usually find it easier to change the settings on the properties panel of the network connection (if you are using windows zero configuration). For wireless connection there is a wireless tab. In the lower half you'll find all SSIDs you have configured. Click your SSID and edit the settings as you need.

  • N97 mini message "packet data: packet data connect...

    hi
    I got a new nokia N97 mini a couple of months ago, it's on a plan with optus, and it's been working fine until a few days ago it keeps flashing this message 'packet data: packet data connection not available' and it won't let me access the web, or even send messages I've tried resetting it but no luck please help me!

    Contact you Operater to confirm that the Packet Data Plan isn't deactivated.. If its active..request them to send the settings once again.. Normally these are sent thru' SMS.. When you receive..first delete all the access points from your phone.. then open the SMS and select..'SAVE'..Now try..
    --------------------------------------------------​--------------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • IMac - WEP-key not accepted (wifi)

    My iMac has been working fine during 1 month.
    Then all of a sudden, when starting up, I got a message, that I was no longer connected to my wifi-network.
    When I choose my (secured) network in the list, and type my WEP-key, it's not accepted (either a message "connection time out", or no message at all, the screen to type the password keeps coming back).
    With my other devices (pc's, iPad, iPhone), there are NO connection problems.
    With my iMac I still can use my neighbour's internet, and I can use my own internet, when I swith off the WEP-key of the router.
    So the problem is that my key is not accepted by the iMac (and I'm sure that I type the correct password; I choose "show password").
    As already mentionned, the first month I could go on the internet (the key was accepted).

    Jim:
    Thanks for your comments. I think you may be right. I have more information now. I installed a later version of the C4500 package (to fix another problem where the PC Firewall and internet access was disabled for 3 mins at startup), and the network setup/diagnostics are different in the newer package. After installing this the first time, everything worked - I mean everything, even scan from printer. During the Network Setup the wizard found only one network (mine). However, the Wireless Network Report said it had detected two.
    However, the next time I switched the printer on, it never connected. Network diagnostics then told me that the PC and the printer were on different networks, 192.168.0.0 and 169.254.0.0 and that this usually results from two close networks with the default router manufactures SSID. This is not the case here - I am in any case in a very isolated country farm!  It also (predictably) said the WEP was wrong. At one point in the diagnostic I can see it's trying 169.254.196.213.  There's nothing on my network other than 192.168.0.*  Attempts to reconfigure the network again show that there is only one network detected on-air, and no duplicate SSIDs, but the same result in the diagnostic - crossed-networks. Even re-installing the software won't fix it now. Whereas before I could at least print/scan from the PC and only the printer 'thought' the network was dead, now the network really IS dead and I am left with a USB-only setup.
    I think you may be right that the printer somehow 'remembers' a phantom/ghost network. What I need is some way to hard-reset the printer. I saw in other postings that you know something about this, at least on other printers. Alternatively, I need a way to set the printer network parameters, including hard-coded IP address, over the USB but WITHOUT the router radio on, then switch it on and let the HP network setup wizard find it over the radio. Any ideas on that one please?
    Peter M

  • Mini won't boot when VGA is attached to KVM -- help!

    My mini (Core Duo 1.86MHz, all updates installed) is attached to a Belkin Pro2 4-port KVM (F1DA104T). I've read comments about issues with KVMs being picky with the mini, but the mini won't even completely boot when the VGA cable is attached. I've used this KVM with other 10.4 Macs in the past (G3's, G4's), so I didn't expect problems. The monitor is a Dell 17" LCD (E173FP), which is fine when attached directly to the mini. I've also tried another LCD (different manufacturer) with same results.
    The mini boots and I first see the gray screen with the Apple logo, followed by a light blue screen, and that's it. The finder never comes up, and I can't even SSH or VNC into it -- just the blue screen. Once I remove the VGA cable (only video - the keyboard and mouse are both still connected), it will complete the boot and launch the finder. If I boot with no display attached, or attached directly to the LCD w/o the KVM in the path, but then attach the mac to the KVM, I see the display for about two seconds, and then the monitor heads into power save mode. When I VNC into the mini to see what's going on, it's detecting two different displays; when the cable is attached but the KVM isn't on the mac's channel, it's one thing. When I switch over to the mac's channel, it's like I'm plugging in a different display. In any case, the computer is putting out 1024x768x60Hz, which is well within the specs of the monitor and KVM.
    I installed SwitchresX and under VNC retrieved the DDC info. Here's what I have for when it's plugged into the KVM and on channel:
    DDC block report generated by SwitchResX for display
    VGA/SVGA Display
    0 1 2 3 4 5 6 7 8 9 A B C D E F
    0 | 00 FF FF FF FF FF FF 00 00 00 00 00 00 00 00 00
    1 | 0A 0A 01 01 0C 1E 17 BE E8 2D C9 A0 57 47 98 27
    2 | 12 48 4C 00 00 00 01 01 01 01 01 01 01 01 01 01
    3 | 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
    4 | 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
    5 | 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
    6 | 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
    7 | 01 01 01 01 01 01 00 00 00 00 00 00 00 00 00 20
    Valid DDC block: checksum passed
    EDID Version........1.1
    Manufacturer........@@@
    Product Code........0 (0000) (0000)
    Serial Number.......0
    Manufactured........Week 10 of year 2000
    Max H Size..........30 cm
    Max V Size..........23 cm
    Gamma...............2.90
    DPMS Supported Features:
    Active off Suspend Standby
    Display type:
    RGB color display
    </pre>
    So far, I'm stumped. This is a $200+ KVM, supposedly better than many of the cheapies, with listed Mac compatibility. Neither Apple nor Belkin wants to take ownership for this problem. If anyone has any tips on where to look next, I'd be very grateful!
    Thanks!
    Jeff

    Hi BSteely,
    Thanks for taking the time to look into this.
    The blue screen I see is definitely not being generated by the LCD - it's coming from the Mac. It's coming up just after the gray Apple logo you see when booting. Normally you'd next see the finder pop up, but that never happens as long as the KVM is plugged into the mac (and it's only the VGA connection which is doing this, since the same thing happens with the keyboard/mouse unplugged from the mac). Once I remove the VGA cable, it continues to boot normally. If I hookup the LCD directly to the mac, it also boot normally.
    Sorry I wasn't clear about VNC. I'm not seeing two displays at once, I'm seeing two different displays -- one when the kvm is on the mac's channel, and another when it switches away. Funny enough, I'm getting MORE resolution choices when I'm not on channel. The DDC info I posted above is for when I'm on channel.
    Jeff

  • FileMaker Server problem on Mac Mini Server - Mac Mini won't boot

    I just installed a brand new Mac Mini Server today, and also FileMaker Server 11. A first-timer for both Mac OS X Server and FileMaker Server, I made an error as explained below, and right now I don't know how to get back on track with the system. It won't boot.
    So, how did this happen?
    At first everything was proceeding according to plan. I configured the pre-installed Mac OS X Server on the Mac Mini with users, groups and services. This was tested from clients and this seemed to work just fine. Then I installed and configured FileMaker Server. This was also tested from a client, and the example database that came with FMS was served up just fine.
    The problem arose when I tried to install my existing FileMaker databases. I simply checked to see where in the file system the example database was located, and then copied my old databases to that location (I think it was Library > FileMaker Server > Data > Databases or something close to it - can't check it now...). I had the FileMaker Server Admin Console running, and hit the Refresh button hoping that this would make FileMaker Server find the databases.
    This was my first error. I should have read ahead in the instructions to see that one is supposed to use an Upload Database assistant instead...
    What happened when I hit refresh was that the FileMaker Server Admin Console became completely unresponsive with a spinning ball as cursor. I left it for about an hour hoping it would terminate, but gave up and tried to shut it down. It wouldn't close, so I force quit it from the Finder. Then I tried to shut down FileMaker Server, but I needed to force quit this as well. After this I thought it would be best to reboot the Mac Mini, so I shut it down, but now it won't even boot, it just stays on the screen with the spinning wheel for ever!
    I have tried all the keyboard options while booting, but nothing seems to help. In safe mode, the grey progress bar just grows to about one third, then disappears and leaves the eternally spinning wheel.
    The server version of the Mac Mini doesn't have an optical drive, only two internal hard drives. I tried to reinstall from scratch using the optical drive on another Mac on the network. The startup disk appeared when I tried to boot the Mac Mini holding down the option key, and after about 20 minutes or so of the spinning wheel I could actually access the discs. I started by running Disk Utility to check disk permissions. There were a lot of repairs concerning permissions and groups, especially on "Library". It said "ACL differs on Library", I don't know what this is but this was repaired. I then ran Repair Disk. The volume appeared to be OK.
    When I tried to reinstall Mac OS X Server however, this failed with the message
    "You can't upgrade this version of Mac OS X because a newer version is installed. Mac OS X Server couldn't be installed on this disk." I don't know how this can be, but I may have run software update earlier today.
    What should I try next? Should I erase the primary HD and try to install again? Or should I install the system software on the secondary HD? Or should I just try to reboot as is in the hope that the disk permission repairs did the trick...?
    Any helpful pointers would be greatly appreciated!

    Hello there, I came across your post when browsing the forum for passive advice. I am in the same boat as you and am a first timer for both of these tools. I work for a company who now needs to expand its network and database capabilities. I have been assigned this task and these are the tools i have opted for. I have not yet purchased them and i am pleased to find someone who has my desired setup. Could you please advise on the simplicity of the setup and whether an advanced knowledge is required.
    I want to use it in a mixed operating system environment. Is this possible?
    Regards
    Matthew

  • Updated iPhone 4 to latest ios7 and now my camera won't save any photos to my albums

    Updated my iPhone 4 to the latest ios7 and now my camera won't save photos to my albums? How do I fix that?

    Okay, mine now works here is what I did.
    plug in the iPhone, iPad etc
    in iTunes select the phone or iPad
    Under Summary uncheck "Sync with this....."
    Under "Music" uncheck the "Sync Music"
    Let it remove all the songs, dont worry it will come back no problems.
    Once that is all done all the music on the phone or ipad should be gone.
    Now check them both back on and everything should copy back onto it.
    Working now !!!!!

Maybe you are looking for