N97 - Missed calls not logged

Hi,
Just got a new N97 with Vodafone and getting the same problems as others (backlight etc). I can live with that for now until the Vodafone firmware is available.
But missed calls are important to me. I'm getting missed calls but not logged. I just get 'no missed calls' in the log but I get the missed calls notification. The 'Received calls' and 'Dialled numbers' logs are working fine.
Now sure if this another firmware issue or some settings not set correctly. I've not managed to find this problem on the net.
Any help appreciated.  

I've uinstalled the app (and also any apps I think might be causing the problem) and did an soft reset (*#'7780#).
I've also tried changing the log duration from 30 days to No log and back again to 30 days. 
Unfortunately it has made matters worse. Now, it doesn't even store any of it (missed, incoming, outgoing calls). It's so unstable now. Sometimes if I switch from one tab (missing call to incoming) it just hangs. Only way to come out is using menu key and Exit. Other times I can see displaying 'Retrieving data' and hangs. Even sometimes the numbers are displayed in 'Received calls', and I tab to 'Missing calls' and back to 'Received calls' the numbers are gone again. I've tried the soft reset many times now but no luck. 
As I've not seen others having this problem I suspect I may have a defective N97.  
My firmware is Vodafone UK  v10.0.012.

Similar Messages

  • 5800- -missed/dialed/received calls not logged.

    Hi, as title says if i make/receive or miss a call it is not being registered on the phone. The log function is set to save all calls for 30 days. The phone used to but just stopped, is annoying if I miss. a call. I should say that if I have missed a call a banner apprears at bottom of screen saying missed call and I have the option to view or back, if you click on veiw it just says no call/s logged. Phone is a red on o2 have just done upgrade to 11.0.009
    Solved!
    Go to Solution.

    I am using nokia 5800 in india and faced exactly same issue.
    It is solved by doing hard reset for me.
    Dial *#7830# , ur phone will restart and will enable call logging again.
    Let me know if u still face this issue.
    Thanks
    Suyog

  • Missed call not displayed.

    Under what circumstances would an unanswered call not show up in the "missed" or "all" area of "Recents"? Thanks for your help.

    Something went wrong then.
    Try reset: hold Power and Home button at the same time, keep holding, when you see the white apple logo appear, let go.
    When no result: connect to iTunes: Restore iPhone.

  • Missed call not showing on lock screen

    Is it possible that sometimes, the missed call doesn't show on the lock screen, but when i enter the lock code and unlock the phone, i find "1" next to the phone icone indicating that there is one missed call? taking into consideration that i hadn't used the ophone for 2 hours and the time of the missed call was during the phone was idle.
    actually i am not sure, i migh have just slided tto unclock before i had a chance to look at teh lock screen and see if there are missed calls :S i just want to make sure if there can be a bug or something that might casue it not to show.
    i have an iphone 4 running ios 6.0.1

    i am facing a similar issue like the one i inquired about avboe:
    i have an iphone 4 and right after updating to ios 6.1.3, I noticed that:
    If i have a missed call, and it appears on the lock screen, then i receive a call from another contact, sometimes, after i end the call, the missed call  disappears from the lock screen. And even when i unlock the phone and access it, i don't find the "1" beside the phone icon indicating that i have a missed call. the same thing happens when i get a call waiting while i am in the middle of a call. sometimes when i hang up, i find the missed call remaining on the lock screen, while other times, it is completely gone.
    This doesn’t happen all the time. Just randomly. It causes me to miss some calls, unless I go into the call register list, then I find the name of the contact written in red.
    I tested it with someone else’s iphone 4 and it does the same randomly as well. The iphone 4S doesn’t do it.
    i would love to know if others are experiencing the same thing. I tried the same with a friend's iphone 4 and the same thing happens randomly!  Did anyone else notice it? Will there b an update to fix it?
    what surprised me is that when i googled the issue, i didn't find it on any communicty. maybe i am using the wrong search terms.

  • Missed calls not showing on lock screen

    On my new iPhone 6, My missed calls only appear as a badge on my phone icon.  They do not appear as a notice on my lock screen. Is this a new thing with ios8?  I now have to go thru a couple of screens to find out who called. Very inconvenient.   Is something wrong with my phone ?  I have the notifications set to appear on lock screen, just as I have with previous iPhones.

    Check if your notifications are enabled in the Settings menu, under Phone. Balloons should be switched on.

  • Not showing missed calls and dropping calls

    I have had a Thunderbolt for several months now and I have had a problem with missed calls not showing up and voice mail showing up with missed calls, I have talked to tech and reported  this and I received a refurbished phone and still have the same problem any know issues with this?

    Hi bbarront,
    I apologize for the delayed response and its unfortunate you are still missing calls with the replacement device.  Can you please advise if you have taken advantage of the newest Software Update? Additionally, are you advising that you don't receive a notification of a missed call and the only way you realize it is when you check your voicemail?  I look forward to hearing from you soon.
    Thank you for your involvement in our community forums,

  • FaceTime does not show a missed call when in the sleep mode.

    When I am gone I would like to know that I missed a call on FaceTime.  It used to show that there was a missed call not now. It was on the screen that you get when u take it out of sleep mode. It's the screen that you have to slide to unlock.  That is where the notification used to be. I have updated to IOS 7.1 on an ipad2.

    The show on lock screen is the only setting I can find that would make any difference. Try a basic reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own. Make sure badge app icon is also turned. If you see you missed a FaceTime call pull down Notification Center from the top of the screen to check all and missed. Another idea, tell your regular FaceTime contacts that if they call and you don't answer they should leave a short iMessage saying they called.

  • 9300i will not log missed/dialled/received calls

    My communicator does not want to log calls on the 'phone screen. It does log all details on the internal screen. If I had a missed call I would nver know as it does not state "Missed Call". My other Nokia 'phones have alays done this as a default. I wonder if it is a phone settings issue or something to do with SIM card settings (Orange).

    try to backup your phone by a full backup,
    format it by removing the battery and re-insert it back and press on ctrl+shift+f when nokia appears, and when prompt click on format.
    then restore back the backup as partial restore.
    this will work, check and let me know

  • BlackBerry - Perl : Missed call count does not go at all

    Hi All,
    I've a T-Mobile BB-Perl. There was a missed call tag on upper left corner and I'ce fall the phone and battery came out. Once I've put back the battery since then the Missed call tag number or tag itself does not go eventhough Call log is cleared. Let me know if any one has solution.
    RGDS\SP

    Try this please, go to message folder, press menu, view folders, and you have a new window with folders, check in each folder and clear it. You are deleting all inside the folder.
    Let me know.
    If I help you with any inquire, thank you for click kudos in my post.
    If your issue has been solved, please mark the post was solved.

  • 7945 phone not displaying 'missed calls' notifications

    Hello,
    I have a user who is no longer getting the 'missed calls' notifications on her phone. This has previously worked but now isn't. 
    They have tried logging into another phone however the issue is still occurring for them suggesting it's an issue with their user profile rather than the phone.
    Can anybody provide any assistance?
    Thanks in advance,
    Daniel 

    Cisco TAC has  said it is directly related to an ITL file sych issue with the phone. The best way to fix it 100% of this time on any phone Is factory default reset. Never mind what firmware is on the phone as it is not common to one device or firmware load. Do this:
    1 – unplug lan cables from back of phone
    2- press and hold # key down and don’t let go
    3- plug wires back in while still holding # key down
    4- with # key still held in, wait for sequence of lights to blink next to line selection buttons. Should take maybe 1 min for this to happen
    5- when lights blink in sequence, release # key
    6- enter 1 2 3 4 5 6 7 8 9 * 0 #
    7- wait a full 5 minutes or more for phone to fully download it’s software. It will say different things on the screen but eventually will fully load and reboot.

  • Missed calls on call log

    When I  get a missed call it does not appear on my call log. They have dissappeared, how do I  get it back ? Any help would be appreciated, can't understand if I  have done something to cause this problem but nothing more infuriating than missing a call and not knowing who it was and not being able to call back.

    Missed calls show up in your messages where you get your e-mail messages folder.
    If this info helped, please click on my Kudos. Thanks.

  • CDR not logging phone calls.

    Hello, I'm just getting into Voice and trying to save Call Detail Records to the buffer of a 2800 series router running CME 8.6 with two 7940 ip phones.
    I have CME set up and I'm placing a call and connecting between two extensions after following the book example to set CDR up.
    Basically, the book example just shows the following commands:
    logging buffered 512000
    dial-control-mib retain-timer 10080
    dial-control-mib max-size 700
    Then, when I Place a call between two phones I have set up and answer the call. I check the logs(show logging) and no CDR info is logged like the pictures show. This is getting very frustrating but appears like it should be very easy to set up.
    Is there something I am missing?

    Is there more to the CDR configuration than the above?  We're trying to track down who's been accidentally dialing 911 and I'm puzzled as to why CDR is not logging anything in the buffer when I try to test.

  • Droid Turbo missing calls, delivering texts late, not capturing call history, not updating e-mails

    My wife got the Droid Turbo Ballistic Nylon just before Christmas as a replacement for her iPhone. She has been complaining that she is not getting calls, e-mails, text messages, voice mail messages. Last night, my son called her twice from California and there was no answer. Checking her phone there is no voice mail from him and her call history shows no attempts. I re-booted the phone and she suddenly got a flood of e-mails, call history, texts messages. She uses this for business and this is negatively impacting her buisness.
    This morning I did a test. I forwarded an e-mail from her phone to me and then I replied to that e-mail, which is set up as IMAP on all devices. I could see my reply on her PC but nothing her phone minutes later. This test is being done in my home with all devices on the same Wi-Fi network. I re-booted the phone into Safe Mode and the e-mail came through. I don't know if it was just the additional length of time or putting it into Safe Mode. Based on the number of issues with multiple applications (she also says she is losing contact information) I am beginning to think that this is a hardware or OS problem. Anybody have any ideas?

    I know that IMAP is sometimes set to auto-sync only every 15 min or more, according to default or user set amount of time.  When you rebooted, the phone auto-synced with the email server.  As far as missed calls and those not showing in logs, I'm not sure.  I can say this though, I was missing calls and voicemails and came to find out that the Advanced Calling HD Voice VoLTE updates had negatively impacted my phone's service.  I have since disabled and service is better.  Perhaps the Turbo also has HD calling enabled and is experiencing similar issues because of that.

  • IPCC - Missed Call Agent not ready

    Hello
    We have three departments using our IPCC Server. One has recently complained about missing a call and their phone gets put in Not Ready State.
    I found this post:
    Go to the SubsystemRMCM.properties file under c:\program files\wfavvid folder. Verify the following setting. Line: agentUnavailRNA=true
    If it is false you will need to change it to True and restart the engine.
    Can you tell me if this is correct? If I change it to false/true will this stop the phones from switching thier state only on a missed call?
    Secondly, if this is the fix, I'm assuming this change is for the entire server and not the individual Que. Can I change it just for the phones who connect to the specific Que?
    Thanks
    Ash

    Hello again
    So we are thinking more about implementing the above solution. I do have a couple of questions/concerns if we do the implementation:
    1. If there is only 1 agent logged in and available, the call will be released to the agent, the agent then misses the call, the call goes back to the Que, the Que checks for available agents and sees this agent is still ready and releases the call again. This would mean the agents phone will continuously ring until he answers it correct? The call will never remain in the Que?
    2. Is there a way to set up the que so that all calls remain in the que until the agent decides to pick up the call? I found this doc:
    http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00801c82ea.shtml
    and was wondering about Figure 3. If I set the connect radio button to NO. Then I need to create the seperate Trigger Contact. However the "Selected" parameter is not found in IPCC 4.03 build 080. This document is for IPCC 3.
    I'm not even sure if changing the Connect radio button is what I'm looking for?
    Thanks
    Ash

  • Facetime not showing missed calls with 7.0.4

    I bought my iPad 2 March 2012. I can't remember when, but just a few month after I bought it, the facetime doesn't show missed calls. There is not 'red badge' on Facetime' icon. I kind of 'fixed' it by restart the iPad (please note, I restart the iPad, not the facetime). The problem went away, but after a couple of days, it came back.
    I installed 7.0.4 recently and hope it would fix the problem, but no luck. The Facetime still not showing the missed calls. However, there are behavior changes:
    1. even though the 'red badge' doesn't show up, if I open facetime, there is a missed call log.
    2.if I open Facetime and then push the home button, the 'red badge' with correct number of missed calls then shows up.
    I took the iPad to the Apple Store for 2 times and they erased everything and re-install the iOs and even firmware from scratch. I didn't back it up from either icloud or my computer to avoid restoring the bugs back. It works fine at the beginning, but the next day, the problem came back again.
    The technician at the Apple Store gave up and said I may have to wait for another iOs update....
    Does anyone have the same problem?
    Can anyone help me?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

Maybe you are looking for

  • How do I get my iLife back for free after Lion Upgrade?

    I upgraded from the Snow Leopard OS to Lion OS (using the thumb drive Apple sales) about a week ago, using a "Clean Install"; after doing which, I found that I couldn't find a lot of the app.s my wife and I downloaded. Our iLife collection is the onl

  • Error when launching Photoshop CS5

    Photoshop CS5 bring up the following error when launching the application "The program can't start because MSVCP110.dll is missing from your computer" Uninstalling and resintalling the application does not resolve this problem

  • Can't move messages between mailboxes

    When I move messages, they turn gray in the original folder, and then are not moved. Or maybe some of them are, but most are not. Or they are moved, but then moved back. I thought it might be filters, but am pretty sure all relevant ones turned off.

  • How we can increase decimal places in Sales Order for Qty

    Hi, In Sales Order qty field now its 3 decimal places for MON unit of measure but we want 4. how we can increase decimal places. Thanks in advance Thanks & Regards, PM

  • EssCell

    Hello,We've had a weird experience with Essbase 6.5.4 running on AIX. We are using Excel sheets that contain many ESSCELL formulas. I'm well aware that the use of the ESSCELL function should be limited because of performance problems (slow retrievals