N97 / N85 - Hard reset - Firmware update Limit ???

Hi
Was wondering if there Is a max Limit to the numbet of times the Firmware can be updated
or the Phone can be Hard reset
before damageing the MEM Cards built into the N97 / N85

Nowhere its mentioned about the limit for reinstalling firmware updates and doing resets so with that i can say it can be done "many" times, basically its done when you encounter any problem doesn't gets resolved with other resets available, at last we resort to reinstalling firmware or Hard reset. I haven't come across any implications nor heard from anyone doing it often.
FYI N97 has a 32Gb hard drive built-in with an MicroSD slot for expansion.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Similar Messages

  • 500GB 7200RPM HD - Can't install "Hard Drive Firmware Update 2.0"

    I installed a 500 GB - 7200 RPM HD and put a fresh install of 10.5.8 and am having the issues described in:
    http://www.macrumors.com/2009/08/19/apple-releases-fix-for-macbook-pro-hard-driv e-issues/
    The main issue is the periodic freezing. About every 20 minutes (sometimes as often as every 5 min) my computer completely freezes. I get the beach ball and the freezing lasts for anywhere from 10 seconds to a minute. My mouse usually responds, but I am unable to perform any task.
    I downloaded the Hard Drive Firmware Update 2.0 ( http://support.apple.com/downloads/HardDrive_Firmware_Update_20 ) which looks like it would fix the problem, but when I try to install it - I immediately get an alert of "This computer does not need this update."
    I'm guessing that the update checks for a Macbook Pro (which the model I have was later renamed to) - but my computer is reporting itself as a Macbook - so the update doesn't think my computer needs the update.
    Has anyone had the same issue - and if so, is there any way I can install this update?

    If your hard drive came with its own anti-shock protection, as, for example, Western Digital drives do, then it may well be interfering with Apple's SMS motion-protection system.
    More information about the SMS here:
    http://support.apple.com/kb/HT1934
    If you disable the SMS and the freezes stop, then you know that was the culprit.

  • Do really need to soft/hard reset after updating f...

    hello..
    i just wanna know do we really need to soft/hard reset our phone after updating firmware??
    btw im using nokia 5800XM..im updating my firmware from V50 to V51
    tq..
    Buy Original..See Original..
    Solved!
    Go to Solution.

    In my experience I've found that when I don't do the reset before and after I invariably have problems. For example when I updated my N97 to the v22 firmware the auto-rotate function stopped working properly.
    I actually also remove all apps and format the mass storage prior to the firmware update which ends up taking a ridiculously long time with the reloading of my media and maps but I now realize that I'll end up having to do it anyway so I might as well do it properly the first time.
    It could just be the N97 as it's such a hunk of junk but I think it's more likely that it's an issue with the update process in S^1.
    Nokia N97 (RM-507) v 22
    iPhone 4 (Coming Soon) - Lemon N97 - SE - Nokia 8210 - Nokia 7710 - Nokia 5100

  • N97 mini hard reset doesn't clear everything!

    I performed a hard reset on my N97 mini due to my WSOD problem, but it seems that it didn't clear everything, I still have a few folders and apps remaining.. which means whatever caused my WSOD has not been cleared yet, as after every 5 phone restarts, I get a WSOD again. Help!

    You can also try formating hard drive(one of the otions in file manager) may help !
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Will N97 mini get new firmware updates in 2012?

    Hi I am nokia fans. Still I am so hope that new update firmware will be release for n97 mini owners. Since 5800 and 5230 get new updates at October 2011. When n97mini will taste new firmware update again?

    v30 was released at the end of June 2011. Don't expect another update anytime soon. I went from V12 to V30 and it's a trade-off in features. The new browser is an overall improvement,but the email client no longer gives you the flashing notification option. Free RAM drops 5 MB's on my phone. The Smart Dial and Emoticons are subjective as features. One thing I do like is that the phone stays in portrait view when closing the keyboard.

  • N97 Memory Problem after Firmware Update

    Hi all,
    im having trouble with my N97.
    i recently updated the software using the nokia software updater....
    now, when the phone turns on it comes up " not enough memory to perform the operation "
    then after it says " memory full, delete or move some data from C: Phone memory. " 
    before i get chance to do this the phone crashes and goes through the same process.
    ive tried deleting and moving files when the phone is just plugged into my laptop.
    but it persists in restarting after like 30 seconds of being switched on...
    any suggestions ? 
    thanks

     make sure you have a back up of your device which you s hould have anyway since you just did update and reformat your phone 
    *#7370# the default code is 12345 and then try the things listed below as well  
    /discussions/board/message?board.id=topfaq&thread.id=159
    try this and also when you install y brower or similar go to c drive
    system and delete drmg and cache folders. no worries they self replicate.  
    Message Edited by radical24 on 15-Dec-2009 03:37 PM
    Message Edited by radical24 on 15-Dec-2009 03:38 PM
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • N97 Product Code 0585162 Firmware Update

    Hi,
    Any news on this? It's been almost a month!
    Thanks,

    As you must have a locked phone it's down to your supplier, VF, 3,Orange etc. You need to check here
    http://www.nokia.co.uk/support/download-software/d​evice-software-update/can-i-update
    and register with Nokia for being messaged when updates are available
    Sorry
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • N97 mini hard reset

    I had my phone reseted, altough there is still applications that are visible, that I might have installed on mass memory.
    They don't start and I can't remove them.

    Try formating mass memory, file manager (in Office)  open E, Options-format mass memory.
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • So did the firmware update fix the 7200rpm drive noise/stalls?

    Apple releases MacBook Pro hard drive firmware update
    A new firmware fix for some MacBook Pro hard drives aims to stop random noises, perhaps bringing relief to some who have been plagued by clicking and beeping internal drives.
    Hard Drive Firmware Update 2.0 was released Wednesday for some 7200rpm drives. It is intended for June 2009 model MacBook Pro systems. The 3.71MB update requires Mac OS X 10.5.7 and will update the drive firmware to 0007APM2. It can be downloaded direct from Apple.
    Apple says the update "reduces certain infrequent noises" made by the drives. Last week, the Mac maker officially acknowledged noisy hard drives that have been plaguing some MacBook Pro owners for months. Prior to the public confirmation, some AppleCare representatives had told individual customers that the company was working on a fix.
    http://www.appleinsider.com/articles/09/08/19/applereleases_macbook_pro_hard_drive_firmwareupdate.html

    I was able to start the MacBook Pro in Target Mode. Tried to run Disc Utility from my other machine on the MacBook Pro and got the following message:
    Verifying volume "Macintosh HD"
    Invalid node structure
    Volume check failed
    ERROR: Filesystem verify or repair failed.
    This machine is less than 30 days old. I did the check and the updater informed me the Firmware was required. Will call Apple in the AM and get the scoop. I would NOT recommend installing the Firmware Update at this time.

  • Is there any way to restore or save hard resetted files?

    I have iPad Air, and last Saturday because I had to space to download and install the update I performed hard reset to update it to the 8.1.2 version of iOS without (i had thought iCloud has taken my Garageband Files) performing any backups. Is there any way to bring back deleted files? They are so important for me, my all musical work for one year has gone now! Especially the wedding song that I composed for my fiancee.

    If you had iCloud backup turned On your iPad should  have been taking automatic backups (See Settings > iCloud > Backup). If this is the case you may be able to restore your iPad to that backup. Make sure that you don't allow your iPad to take any more backups now.
    To restore from an iCloud backup see here: iCloud: Restore or set up your iOS device from iCloud

  • N85 will not hard reset after V30 firmware update.

    I just got my new Black N85, this is my second one I also have a copper one but it is only at version 20 firmware and when I did a update to version 30 firmware, I could not do a hard reset doing the *#7370# or the three finger reset, all it did after I put in security code is reboot and go back to the home screen, no reset at all. Here we go again with Nokia and their messing with the people that make them the million's that they have. I am getting so SICK of Nokia and their Garbage!!!!

    i think you are genuinely confused as to what a hard reset is, Grschinon is indeed correct. i am sure that you can perform this on your phone so try this:
    with the phone turned off, press and hold the green call key, * key and the 3 key all at the same time. while holding all of these down, press and hold the power button down until the Nokia hands logo is displayed on the phone. there should now be the country selection/date and time selection screen displayed. if that does not work, then instead of pressing the 3 key, substitute this for the multimedia key (small silver key). if those still do not work, then your best bet is to take your phone to your local Nokia Care Centre for them to take a look at.
    please throw some kudos our way, it would mean a lot to us   
    If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

  • N97 cant connect to internet after firmware update

    Let me start by saying that I've always been a loyal nokia supporter until the n97.
    from the first day out of the box it has given me nothing but trouble!!! and i think that Nokia made a lot of mistakes with this "flagship phone"
    But on to a more recent problem I've been having. i updated my firmware (via computer) to firmware v20.0.0.19 unfortunately I've completly lost the ability to go online through any form (3g /wifi) I've done everything i could think of (soft reset, hard reset) but nothing helps. I've read many threads who appear to have the same problem, only nobody has found a full prove solution (as far as i can see)
    please prove me wrong. I'm  at the point where it annoys me so much that i want to trow the phone out of a 5 story window

    hi, sorry you're having problems, it may seem obvious but have you tried deleting all your internet access points, and then adding new access point ? May help, also I'm sure I saw another post with a similar issue also on 3, maybe worth contacting them as they are renound for tightly controling there branded phones and may be able to send you some new settings.
    Hope you get it sorted it's a great phone once it's running right, and mine is on V2.1.
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • N97 Firmware update v2 bricked phone

    I own an unlocked N97 in the UK, and after waiting discovered that the v2 firmware has finally been released!
    So, I backed up my phone, installed the firmware update (which completed successfully) and the phone rebooted itself.
    It booted fine, and then the annoying email wizard popped up and the 'phone stopped responding.  I left it for 15 or so minutes to see whether it would start responding to unlocking etc and it didn't.  I tried switching it off using the power button and, as I expected, it didn't even register that I'd pressed the button.  After a couple of minutes of messing around with it I removed and replaced the battery and switched it back on... now it just sits on the white screen with the blue Nokia logo, no sounds, nothing.
    I have tried leaving it to see if it finishes the boot process (after half an hour it's still sitting there...), I have tried taking the battery out for 10 minutes before trying to turn it back on and the same thing happens.
    Anyone got any ideas, or is this going to require yet another replacement handset? (given that this is now the second N97 I'm on...)
    Out of the two N97 owners in this house, we've now had 5 N97s between us, I can't say I'm impressed.
    Solved!
    Go to Solution.

    Hard reset the phone using the keys and you should be fine.
    Turn your phone off AND simultaneously press these four buttons circled in red.
    Caps Button
    Space bar
    Backspace button
    On button  
    I love my purple screen, 1/2 day battery, sketchy touch screen and $800 price tag - I call it my Lumia 900

  • N97 Firmware update - E: Mass memory 100% full -- ...

    Help!!!
    I just did an firmware update on my N97 to v11.2.021 and when the phone restarted I got a message that E:\ (mass memory) is completely FULL.
    And my F:\ (a 1GB memory card) shows corrupted. **bleep**!?? I'm glad I didn't store anythign important there.
    I looked up via the File manager and sure enough, the E:\ (mass memory) show 0 MB free. I opened it up.. but I can't quite tell what's takign up all the space.
    I see a few weirdly named/weirdo character filenames.
    Can somebody please help?!! Is there a way to roll off the update?!

    Okay.. here's what I've done. The phone was working alright after the update (maybe just a tad slower) and I didn't notice any other issues except for E:\ filling up.
    After a while.. when I'd use File Manager in the phone to browse to E:\.. I got a (memory corrupted) message. So my E:\ was pretty much done/gone.
    So I did the hard reset *#0730# and then from the File Manager.. did a 'Format Memory' on E:\ and this cleaned E:\ up. 
    BUT... all my pre-loaded US map data is now gone. The lady at the Nokia Flagship store had told me the N97 came with pre-loaded US maps. They're all gone now.. oh well. 
    But i'm still effin annoyed that the update didn't work though.. so Nokia still gets a thumbs-down in this department.

  • External hard drive is not working on airport time capsule even after 7.7.2 firmware update.

    External hard drive is not working on airport time capsule even after 7.7.2 firmware update.
    I have the latest Airpor Time capsule 2gb. I specifically bought it so that I could have an external hardrive set up to wirelessly house my itunes library and movies. When i connect the drive, all i get is that the disk needs to be repaired.
    the drive can works fine when connected to the macbook pro and I have run the verify and repair features in disk utility. I have also reset the airport timecapsule as well following these changes and still no change.
    The 7.7.2 update says that it addressed the usb issue of not showing the drives but there are still problems as I cannot get it to appear.
    Please help.
    Thanks

    How is the hard drive formatted?
    Have you tried using a powered USB hub with the drive when it is connected to the Time Capsule?
    (The USB port on the Time Capsule is borderline as far as power is concerned....you may need to use a powered hub.....even if the hard drive has its own power supply)
    If the drive is formatted correctly....and....it has ample power, it will "show up" when you open AirPort Utility, click Edit, then click the Disks tab at the top of the next window.
    In the example below, my Time Capsule drive is named "Backups" and another drive named "WD Drive" is connected to the USB port on the Time Capsule.
    You should see the name of your Time Capsule drive (named "Data" unless you have changed the name) and the name of the USB drive if you perform the same check.
    What do you see?

Maybe you are looking for

  • How can I get my Apple Remote to play/pause and do other functions on all applications?

    When I press the F8 button on my Macbook, it plays or pauses the media for whatever media application I have open, whether that's iTunes, VLC, or MPlayerX. Same goes for F7 and F9, which are backwards and forewards respectively. Well I recently bough

  • Keyboard issue - "C" key is intermittently responding

    I have a MacBook Pro 15" I bought in January. Yesterday the "c" key began acting funny. I have to press it very hard for it to respond, but not always. Sometimes it seems to work fine, others if I press it with regular pressure it does not respond, b

  • How to install capture drivers from cd?

    Hello, i just bought the NX7950GT-VT2D512EZ-HD card and installed it. it should have video in but when i click on the "install capure drivers" option on the cd menu nothing happens. everthing else i click on in the menu works. the pop up information

  • Hint and database settings

    Hi to all, I have an issue with my database (10g). In detail when I set an hint in a query the explain plain does not set it as the path? Why do I have this behavior in your opinion ? What tables or setting do I see to understand the resolution ? TIA

  • [JS:CS4] - How to Load the PrinterPreset in InDesign

    Dear All, I'm having the Printer Presets ".prst" in some where in the local machine, How to Load this preset in to Application though javascript. I can create the preset through :   preset.add() method. but I can't load from the user given or mention