N97 - Nokia Messaging msj: "Cannot connect to serv...

Hello everyone,
My name is Leonel and I´m from Argentina.
I bought my N97 - 3 by internet.
He fact is that i m trying to configure my Nokia Messaging with and IMAP account (job´s account)
In the past I have had configured this account on my device, but after a hard reset (due to firmware update) I can not make this account works (my Gmail and Hotmail account works perfectly)
I have checked all the fields like Incoming / outcoming port and server, mail, password, etc but the message always appear "Cannot connect to server"
I know that this account with the parameters i have put in the nokia mail web works perfectly since i have the same working in my PC (outlook express)
Thanks in advance.
Best regards,
Leonel.

Hi!
Thanks for your reply.
I will try to do what you said, but the i don´t think this will work.
I already have the nokia messaging on my device with 3 configured accounts: GMAIL / HOTMAIL / OVI MAIL.
The only one wich does not work is the IMAP account of my job (in the past, i had it full working on my n97 device, but as i said, after a full reboot, i try to configure again with no succes)
On the other hand, i am now trying what you said. Logining in email.nokia.com and making this page send me an sms to installa the Nokia Messaging on my phone again.
++
PD: For your information, when i try to configure my IMAP mail on the webpage ( http://email.nokia.com ) i fill in all the full blanks like incoming server, port, outcoming server, port, email, password, user, but after some seconds the webpage shows a message telling that it is not possible connect to the server. Try again later.
I do not know the reason, because i have this same this account configured in my oulook express (PC) with these same parameters, and works well.
Many thank again.
Best regards,
Leonel.

Similar Messages

  • TS3899 Why am I unable to connect to server to check email? The message reads "cannot connect to server"

    Why am I unable to connect to server to check email? The message reads "cannot connect to server"

    Many things could cause this, for example, the email server is down or cannot be reached due to an Internet problem.

  • TS1398 every so often i lose wi fi internet, even though laptops in house still get wi fi signal. phone message says cannot connect to server.

    lose wi fi signal at home, message says cannot connect with server. can access wi fi with laptops
    but not with iphone5

    Your problem is completely different from the subject of this thread, which is about intermittent connections to ONE WiFi network, not all networks. As you have an iPhone 5 just take it to an Apple store and they will replace it under warranty if they can't resolve the problem.

  • I am not able to get my email on my phone. Message is cannot connect to server. However I can open safari

    I am getting the message 'not connected to server' when trying to retrieve my email. However I can open safari.

    I've had the same issue for 6 months.  I worked with Apple reps who fiddled with my iphone 5, Airport Express and Imac settings.  NOTHING worked.  Then today, I called Apple yet again and by accident found something no rep had mentioned:  there's an option to snyc your phone to your wifi.  How do you find it?
    1.  Connect your phone to your computer using the usb port (take off the electric plug on iphone cord).
    2.  Open up iTunes (you don't need to be connected to internet).
    3.  If you don't see a side bar with a menu, then hit View, Show sidebar.  Now under "Devices" choose your iphone. 
    4.  A large window with a menu of options appears.  One box says "Sync with this iPhone over Wifi."
    Check that box.  WHY DID NO ONE EVER TELL ME TO DO THIS???
    I saved that change, rebooted my computer, and for the first time since I've owned my phone, instead of telling me it's unable to join my home network, it actually let me put in my network password and hooked into Wifi.
    Now, will this last?  We'll see tomorrow.  Let me know if this works for you!

  • When I am connected to the Internet I cannot sign into FaceTime. A message comes ' not connected to server. Check Internet connection' . Am unable to contact folks on FaceTime for last 5-6 days. Please help

    Dear Friends,
    I am unable to contact my friends on FaceTime last 5-6 days. Although I am connected to the Internet and browsing my mails successfully, when I sign into FaceTime with correct ID and PW a message appears ' cannot connect to server. pl check Internet connection' this is very confusing. Pl help.
    thanks
    ARabinda Ganguly

    Make sure your time zone and time are correct. Have the iPad get the time automatically.

  • Suddenly i cannot receive emails - cannot connect to server

    cannot receive emails. message says cannot connect to server. have checked and everything looks okay.

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
    If the issue persists...
    Delete the Email Account and then Re-add it.

  • IPhone 5 won't let me set up yahoo mail it just says cannot connect to server

    I've just set up my mother in laws new iPhone 5 and everything was fine until I tried to set up yahoo mail, i just got a message saying cannot connect to server, any ideas how to fix?
    Also has signal issues compared to 4s.
    Thanks
    Zoomer.

    When you set it up, under settings, Add Account but don't select "yahoo!" select "Other" instead and then set it up...
    Incoming Server - imap.mail.yahoo.com
    Outgoing Server - smtp.mail.yahoo.com
    Incoming Port - 993 (requires SSL)
    Outgoing Port - 465 (requires SSL/TLS)
    Username: full email address (example: [email protected])
    Password: the password you login to Yahoo with.

  • 0n hp m276nw error printer cannot connect the server

    i am trying to set up scan to email every time i go through the proses at the end i get this message on hp m276nw error (printer cannot connect the server) i put the out going email in then i put in the printer port and server number in when i do the test it says  error printer cannot connect the server any help will be well come

    Hello youssi,
    Welcome to the HP Forums!
    I understand when you scan to email you're receiving a message stating cannot connect to server. I will do my best to assist you! Please follow this entire HP document on How to Scan: From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) just to make sure everything is correct.
    If this doesn't work, then please follow these steps to try setting an alternative DNS to see if that resolves the issue:
    •    Open the Embedded Web Sever on your computer.
    •    Click the Network tab.
    •    Under Wireless click on IPv4.
    •    Under DNS Address Configuration select Manual.
    •    Set the Preferred address as 8.8.8.8
    •    Set the Alternate address as 8.8.4.4
    •    Click Apply twice to confirm the change.
    •    Turn the printer Off and back On and see if the issue is resolved.
    Please post your results, as I will be looking forward to hearing from you. Have a great night!
    I worked on behalf of HP.

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • PI 7.11: Cannot connect to server using message server:...

    Hello Guys,
    we make the Application Management for a Customer PI System.
    Scenario:
    - the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
      SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
    - WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
      Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
    Problem:
    Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
    "Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
    In the Details from the Error Message:
    "<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
    Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
    The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
    Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
    Sorry for my bad English
    Best Regards,
    Markus

    Hi Markus,
    did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
    P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented.  There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
    If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
    (This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
    Solution: Establish a connection without any proxy in between.
      E.g.: a terminal server in the same network
    It would be helpful to find more people with the same problem to force a fix from SAP for that.
    If anyone else is having problems with this, please add a comment to this thread.
    Best regards
    Christian

  • I recently updated to iOS 8.0 on my Ipad however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this?

    Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.

    Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
    Also, is this a Oracle DB?  IF so, has the following 32 bit Oracle Client components been isntalled:
    Oracle Objects for OLE
    Oracle Data Provider for .NET
    Oracle Providers for ASP.NET

  • Error message "cannot connect to server"

    Often I get an error message "cannot connect to server" when
    I want to connect to acrobat.com directly from a .pdf document in
    order to upload it . Is it possible that there is some security
    issue involved, e.g. that the document is protected somehow? Or
    could browser or firewall settings be involved?

    Hi Peterernst,
    Thanks for posting.
    Perhaps yes, firewall, and browser popup blockers have been
    known to cause some behavioral, and connectivity issues within
    Acrobat.com
    Users have had success with allowing *.acrobat.com as a
    trusted site locally, to see if that allows connectivity.
    Also what browser, and OS are you using?
    If still in the Unix environment, do you have access to a
    Windows, or Mac environment?
    Thanks!
    Pete

  • I get the error messages: "Server not found" or "Cannot connect to Server" and thus cannot print. I don't even know what a server is.

    Hello: I am not computer savvy.
    I have run "Network Diagnostics" and the message "Cannot connect to Server" comes up. I can connect to the internet. I have tried turning off the whole system and the printer individually and nothing seems to change the message.

    hello,
    i got the same issue i'm using kde the link abe for "Adding a login manager (KDM, GDM, or XDM) to automatically boot on startup" guide is dead
    arkham wrote:Have you tried the inittab approach for starting kdm? http://wiki.archlinux.org/index.php/Add … tab_Method
    could you help me please ?
    Thank you
    Last edited by hael (2012-05-05 08:57:44)

  • Cannot connect to server using message server: ms://xiidhasoft:50004/P4

    Hi SAP Guru's
    When PISUPER or any any of the enduser is trying to login in the Integration Builder , they are getting error
    Cannot connect to server using message server: ms://xiidhasoft:50004/P4
    I have tryed to search in SDN and got below solution but no success
    1. Exchange Profile of PI - http://host:port/exchangeProfile
    2. Check with the rmi port number.
    3. if rmi port number is empty or any number is present ( check with Tr code: SMICM - services - check for p4 port number - it will be ex: 5<nr>04)
    4. fill the rmi port number as present in the P4.
    OR
    implement note 864268
    I have Netweaver PI 7.1 .
    Please suggest some alternative solution.
    Thanks & Regards
    Vinay Patel

    You may check your local PC Java Network Setting.
    Troubleshooting:
    Probably Javau2122 WebStart does not detect the correct Proxy Settings. In this case please proceed as follows:
    To change the Proxy Settings for Javau2122 Web Start:
    1. Click Start --> Run  and enter javaws. Press button OK.
    2. Control Panel -> Programs ->Java -> Network Settings...
    3. Select Direct Connection to switch off the proxy settings and press button OK.
    If this still does not work, select Use proxy server to set manually the HTTP Proxy and Port.
    Contact your network administrator for the correct settings.

  • When I try to receive my mail a message pops up saying "cannot connect to server" how can i fix this?

    Hi im wondering if anyone can help me! When I try to receive my mail from my account a message pops up and says "cannot connect to server" I have tried things like deleting my account and adding it again, rebooting my Ipad, restoring my Ipad. it has all the latest update and still wont work Is there any one who can help me please?

    I would try the router reset. That's sadly all I got.

Maybe you are looking for

  • Use of javax.jdo.Transaction in BMT

    Sections 16.1.3 and 16.1.4 of the JDO spec (version 0.95) state that the application code with a Bean Managed Transaction has the option of getting a Persistence Manager before a UserTransaction is opened and managing the transaction through the java

  • Help with Keywording a group of Images

    I need help applying keywords to a group of selected images. For some reason I can't get this to work. I've done it before and now it won't work. Here is what I'm doing. I've selected a group of images in a project by using shift and clicking the fir

  • Screencasts on SUP 2.0 Mobile Workflows (Hybrid Web Container)

    http://blogs.sybase.com/himagiri/ I've started posting screencasts for SUP 2.0 focusing on the Mobile Workflow/Hybrid Web Container functionality. Feel free to comment with any other topics you are interested in hearing about.

  • Cannot open Skype - "has encountered a problem and...

    Hi all, I haven't used Skype in a few months, and just tried opening it - it crashed immediately.  I completely uninstalled it, downloaded the latest version and installed that, and rebooted my pc.  It first opened and said it was updating, then cras

  • Can't extend network:  AE models the problem?

    checking out some other messages I searched out here, I suspect I may have the problem figured out, more or less, but need to figure out how to be sure: I have 5 airport expresses, bought at different times, that make up a home network designed to pl