N97 Not powering up.......

Hi guys i was having a few probs with my n97 so i tried re-updating the software via ovi suite then it came up with an error so i disconnected the usb and remove the battery once when i put it all back in the phone does not power up i can feel the inital vibration when i press the power button but not a single light or the screen come on......please can someone HELP!!!!!!
Message Edited by vpatel79 on 23-Nov-2009 07:37 PM

I ve had this problem for some times now. As stated above only a hard reset will turn it back on. Problem is when you do this you then have to restore your device and reload the stuff back on your phone (extremely time consuming). Imagine having to do this almost twice a month becasue when I send it in to Nokia it came back working but problem reccurring almost a day later. Sending it to Nokia is waste of time. After the last hard reset (being the 5th time), I left the phone in its original state and seems to work OK. still freezing/hang ups, screen back light wont turn on at times, and bunch of other problems which is the petpeeve of this device.

Similar Messages

N97 not on

Pls help me my n97 not oning...i simply off to change sim since then it not on again

Hi, put your simcard and battery in, connect to charger and make sure it has not just run out of battery.
If not, try your old simcard again. If it should, by any chance, be your new simcard screwing up, then get a new one.
Do you have a memorycard installed? Pull it out and try powering on.
If not - You should try a hard reset. This will delete everything on phonememory, but might be the only solution. Press Caps shift - space - backspace while powering on. Keep holding the buttons in until youre past the "nokia handshake screen".

My iphone 5 is not powering the scree, when i connect the iphone to the power it only vibrates

my iphone 5 is not powering the scree, when i connect the iphone to the power it only vibrates o make the connect sound (is like the sound when you connect the phone to power) and the screen remains black, itunes recognizes the iphone, but i cannot do a hard reset because the power button does not work, and have password in my phone so itunes wond restore it. i want to know if is a hardware problem like the mother board o something. help please

If you have iOS 7 installed, you can try to restore it via the instructions given by lllaass in https://discussions.apple.com/thread/5634135
As an alternative, you could take it to an Apple store genius bar and have the techs test it and see what is wrong beyond the failed power button.

Copying iMovie back to tape: "your firewire camera is not powered on"

I'm trying to follow iMovie 6 instructions for copying a movie back to tape.
I connected my camcorder to the computer with the firewire cable, and it shows up in the Share-->Video Camera menu as an attached device. (It's a Canon Elura 100, btw.)
So all seems well until I start the procedure, and then I get a "Cannot Export to Camera" error message that says "your firewire camera is not powered on or is not available."
My ever so slow brain thinks this might have something to do with the fact that I'm using the DV/firewire cable that I used to import the footage into my iMac, and maybe it only sends stuff OUT the firewire end, and won't send video the other way?
Do I need a different kind of firewire cable?

Thanks for your assistance!
I bought this camcorder from Amazon.com (USA) and I have not daisy-chained it anywhere. I've only connected it to one device at a time. It is capable of receiving digital as well as analog video, and can convert analog to digital.
For example, I used my stereo-video cable to transfer footage from an old VHS tape played by our VCR to my Canon Elura camcorder via the Canon's AV terminal.
Once the tape was safely transferred into my Canon camcorder, I then plugged my DV/firewire cable into the Canon's DV terminal, and the firewire end of it into the iMac. iMovie saw the Canon camcorder and imported all the footage very nicely.
Now I would like to transfer the edited footage from iMovie back to a mini DV tape, and my iMovie help file says I can do it, but it's a little sketchy on what cables I should be using.
The firewire/DV cable I used to send the footage IN to iMovie isn't working to receive the edited footage OUT of iMovie. So maybe I need a different kind of firewire cable?
Thanks for any help you can offer!

HT201401 4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out l

4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out loud.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

My apple tv3 is not powering on. Connected with Computer, with micro USB cable with power on, it is not shown in Devices. How to rectify

My apple tv3, serial no. C07JWBZ9DRHN is not powering on. Connected with Computer, with micro USB cable with power on, it is not shown in Devices. How to rectify

You have to remove all cables before connecting to your computer with micro usb. Power is only connected when using a 3rd gen device and done after the initial connection.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

How to print to my wireless all in one photosmart prem c410 when printer is not powered on?

how to print to my wireless all in one photosmart prem c410 when printer is not powered on?

Hi,
You cant print to a printer that you physicly turned off. Most network printer have a sleep mode, so leave it on and after a while it should go into a sleepmode. And should wake up when a printjob is being sent.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

27" thunderbolt monitor is not powering back on with Laptop

Since updating to the new version of Yosemite my 27" thunderbolt monitor is not powering back on when plugged into my laptop via the thunderbolt port. Suggestions on how to get it back up?

Apple Support had me reset the SMC and after doing so my monitor came back up and functioned like it was supposed to. Support said sometimes after updates we need to reset the SMC if changes aren’t cleared from the previous update resulting in behaviors like I was experiencing. Below are the steps i followed to reset the SMC.....
1. Shut down the computer. 
2 Plug in the MagSafe or USB-C power adapter to a power source and to your computer. 
3 On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. 
4 Release all the keys and the power button at the same time. 
5 Press the power button to turn on the computer. 
On MagSafe power adapters, the LED might change states or temporarily turn off when you reset the SMC.

I bought download Adobe Premier elements last year. It is on my old computer which is not powerful enough. I have a new computer that is, I bought and upgrade for $69 but have got no where after several hours. what do I do

I bought download Adobe Premier elements last year. It is on my old computer which is not powerful enough. I have a new computer that is, I bought and upgrade for $69 but have got no where after several hours. what do I do?

What are you trying to do? What actions are you taking? What happens when you try?

How to get albums covers also to phone (N97), not ...

I do not understand why does my N97 not have the album cover pictures but for about 10% of the albums. Especially odd this is regarding that Ovi Suite displays the same albums with cover pictures on PC.
All the albums have been copied from my CD's.
Those albums having their cover displayed in both the phone and the pc are, e.g., Hard Days Night (Beatles), and Beethoven: Klavierkonzerte by Deutsche Grammophon.
Those albums having their cover displayed only on pc (not on phone) include, e.g., Heavy Horses (Jethro Tull) and Eternelle, Best of (Edith Piaf and others).

Ovi Player is sometimes erratic with album art - if you add it to trakcs using Ovi Player it isn't always transferred to the phone.
There is a tutorial here:
/t5/Pool-of-Knowledge/Editing-music-track-info-and-album-art/td-p/453175
The screenshots are from an N96, but the N97 should work more-or-less the same.

Macbook Pro late 2011 not powering on. The charger shows a blinking dim orange/green light.

Macbook Pro late 2011 not powering on. The charger shows a blinking dim orange/green light. I have tried pressing the small button on the side of the macbook pro to check the battery, but no lights show up.

Hey Angelo_here,
I'd run through these steps:
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
via: Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Welcome to Apple Support Communities!
Regards,
Delgadoh

USB not powering external drive on new macbook pro

My new macbook pro retina display is not powering an external 750GB GDrive moblie. Is anyone having this problem?

It seems as if a number of people are having problems with the USB 3.0 ports on the 2012 MBP's - particularly when it comes to external storage devices.
As you don't have a FW800 port (or, yet, an adapter) the best thing you can do is either return it to your local Apple Store and see if they know of a 'fix' (which I doubt - someone would have posted that by now), whether it's only occurring with some MBP models, and you can always file a bug report with Apple: https://bugreport.apple.com/cgi-bin/WebObjects/RadarWeb.woa/wa/signIn - you must sign in with your Apple ID.
Hate to be the bearer of bad news, but there have been quite a few people posting here with the same problem.
Good luck,
Clinton

MacBook was restarting on its own and now is not powering up. What could cause this and how to troubleshoot?

MacBook was restarting on its own and now is not powering up. What could cause this and how to troubleshoot?

When did it happen? After updating/upgrading? or just randomly?
You can try to perform a SMC reset and resetting the PRAM:
SMC Reset -> http://support.apple.com/kb/HT3964
PRAM/NVRAM -> http://support.apple.com/kb/ht1379

Iphone suddenly gone blank. Not powering on

iphone suddenly gone blank. Not powering on. Any suggestions?

Hello Navalagarwal,
The following article contains a few steps that may help get your iPhone powered back on.
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Best regards,
Allen

E540: Not powering up

Few months old E540 is not powering up. When I press the power button, the led is lit and the fan turned on but nothing else happens. Nothing on screen and can't even open the DVD tray. Have tried fn+F8, removing battery without luck. Haven't done anything special recently or installed any new software. What next ? Any help is greatly appreciated.

Good day and welcome to the community.
Please have a look at this Knowledgebase article:
https://forums.lenovo.com/t5/11e-Windows-E-and-Edge-series/E540-Cannot-power-up-the-system/ta-p/1497840
Does this seem aplicable to your situation?
Regards.

N97 Not powering up.......

Similar Messages

Maybe you are looking for