N97 restarts itself when connecting to PC via Mass...

Hi guys,
My friend has a N97 and she changed the font using E:\Resource\Fonts\ folder method. The font was successfully changed; however, she didn't like it.
So she decided to change back the font, but whenever she connects the N97 to PC via "Mass Storage" mode, the phone restarts itself, and by that I mean EVERY SINGLE TIME it'll restart.
Therefore we tried "PC Suite" mode, but we're unable to make any changes to the Fonts folder (ie delete / rename / cut-paste).
I've also tried using X-plore, but whenever I try to delete the [s60snr.ttf/etc...] files, xplore will give me an error: "Can't Delete File: E:\Resource\Fonts". I'm sure that the file isn't in "read-only" if that helps anyone.
The fonts are stored in the 30gb internal memory inside the N97, so it's impossible to swap out the memory and delete on another phone/computer.
I appreciate any answers

Hi Guys,
I had same problem with my N97 mini. I do not have external memory card. I installed 'FONTS' in my mass memory. Font changed but if I connect my phone in mass storage mode, phone resets.
Here is what I did,
1. Copy all my data in PC using PC suit mode ( I suspect back utility will not work here because it will restore the back up including fonts folder in mass memory. I am not sure though). Also copy RESOURCE folder in your PC ( you can delete fonts folder in this copied folder in PC. I made a mistake of copying only RESOURCE folder you can copy all the folders from mass memory and restore it later.
2. disconnect the phone from PC
3. Open , Office --> File mgr. --> Mass Memory --> got to options --> Scroll down --> format mass memory.
That's it.
Your phone will be 'shut down' after formatting is completed.
Restart the phone connect it to PC suit. You might not be able to see mass memory. In that case connect it in ' mass memory' mode. You can find your phone is not resetting. Copy RESOURCE folder from PC with out fonts folder.
You may reinstall firmware and reinstall all the application you need.
It worked form me. Hope it works for you. Do it on your own risk. Do not forget to copy the data from mass memory.
You may find HARD RESET options (*#7370#) but it only resets your C drive and not F OR G Drive.
If you have installed Fonts in G (External memory). I guess you can just remove it from phone and remove the fonts folder easily. Just remove external memory use card reader to connect it to PC and remove.
CHEERS

Similar Messages

N97 restarts when connecting to PC via Mass Storag...

Hi guys,
My friend has a N97 and she changed the font using E:\Resource\Fonts\ folder method. The font was successfully changed; however, she didn't like it.
So she decided to change back the font, but whenever she connects the N97 to PC via "Mass Storage" mode, the phone restarts itself, and by that I mean EVERY SINGLE TIME it'll restart.
Therefore we tried "PC Suite" mode, but we're unable to make any changes to the Fonts folder (ie delete / rename / cut-paste).
I've also tried using X-plore, but whenever I try to delete the [s60snr.ttf/etc...] files, xplore will give me an error: "Can't Delete File: E:\Resource\Fonts". I'm sure that the file isn't in "read-only" if that helps anyone.
The fonts are stored in the 30gb internal memory inside the N97, so it's impossible to swap out the memory and delete on another phone/computer.
I appreciate any answers

Hi Guys,
I had same problem with my N97 mini. I do not have external memory card. I installed 'FONTS' in my mass memory. Font changed but if I connect my phone in mass storage mode, phone resets.
Here is what I did,
1. Copy all my data in PC using PC suit mode ( I suspect back utility will not work here because it will restore the back up including fonts folder in mass memory. I am not sure though). Also copy RESOURCE folder in your PC ( you can delete fonts folder in this copied folder in PC. I made a mistake of copying only RESOURCE folder you can copy all the folders from mass memory and restore it later.
2. disconnect the phone from PC
3. Open , Office --> File mgr. --> Mass Memory --> got to options --> Scroll down --> format mass memory.
That's it.
Your phone will be 'shut down' after formatting is completed.
Restart the phone connect it to PC suit. You might not be able to see mass memory. In that case connect it in ' mass memory' mode. You can find your phone is not resetting. Copy RESOURCE folder from PC with out fonts folder.
You may reinstall firmware and reinstall all the application you need.
It worked form me. Hope it works for you. Do it on your own risk. Do not forget to copy the data from mass memory.
You may find HARD RESET options (*#7370#) but it only resets your C drive and not F OR G Drive.
If you have installed Fonts in G (External memory). I guess you can just remove it from phone and remove the fonts folder easily. Just remove external memory use card reader to connect it to PC and remove.
CHEERS

IPod restarts itself when connecting to Windows

I've been having this problem very often over the past few weeks when I connect my iPod it will flash twice and then restart itself. I figured maybe running the error check that windows has in the properties of the drive might work, but nothing changed. It continues to happen.
Also (this problem was already reported, but I will reiterate the situation) the iPod will say it's connected, but iTunes shows it as not being connected. In addition, I can't eject it from Windows Explorer because it says the iPod is currently in use by another application. So I'm therefore forced to pull the plug on the iPod and then it disconnects as normal (which makes no sense, flaw?)

I have a problem which seems to have been raised often but not solved. Have a 120gb Classic and connect to PC and laptop using Windows XP pro. Laptop works fine. When connected to PC, connection bubble appears and then computer re-sets. Uninstalled Itunes software with Revo uninstaller and again, when I connect the IPOD to a USB port, computer crashes. I can run any other peripheral through USB's without a problem.
Guess it's a USB problem. Anyone any ideas please?

Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

My iPod keeps restarting itself when I choose a song! Whats going on?!

My iPod Classic 5th generation 30GB keeps restarting itself when I choose a song! I recently restored it (which helped with another problem), and I put all of my songs back onto it, but then when I went to go play a song, it just restarted itself! So I tried again, and it just did it again. No matter what song I choose, it will restart itself. So I went onto the support site and it told me to try toggling the hold switch a few times and then hold the menu and center buttons together to restart it. I did this and I thought it was going to work (I got it to play 3 songs!!), but then again...it restarts itself. I have to repeat this everytime I want to listen to a song, and even then it's not guaranteed to work. Needless to say, I'm getting a little frustrated! Any solutions?! PLEASE HELP!!! I need my music

See Corrupt iPod classic.
If the device's database is stored somewhere that cannot be reliably read back then it appears as an empty device.
tt2

Why my iphone 5 restart itself when I make a call on facetime?

When I make a call on facetime, sometime my iphone 5 was hang, then black screen and restart itself.
At the first, I think it's because my ios is 6.0 so I update to 6.0.1 but it still restart itself. What should I solve this problem?

Thank you

I cannot play music when connect to stereo via 30-pin connector. Help?

Since I first upgraded my iPod Touch 2nd Gen to iOS 4.x, I cannot play music when connect to external speakers via the 30-pin connector. I've tried several different speaker systems, but none work. My iPod freezes after making my song selection and doesn't do anything until after rebooting. Even then, it just goes through the same cycle if I select another song. My iPod is 100% functional until I try to plug it in to an external speaker system.
Keep in mind that it worked up until iOS 3.1.3.

Sounds like iOS 4 broke the compatibility with your accessory, something that sometimes happens with major OS changes. Your only hope is to see if the accessory manufacturer has an update to make it compatible with iOS 4, or downgrade your Touch back to 3.1.3.

IPod classic restarts itself after connecting

After installation of iTunes 9 my iPod 120GB often wouldn't connect, but I think that happened to all of this iPod users. Today I plugged it in, but after showing "Connected. Eject to disconnect" for about 2 seconds, it restarted itself, showed an Apple logo for 10 seconds and disconnected. After that it connected itself again for two seconds, restarted, disconnected, connected, restarted, disconnected...
Also: there is some of my iTunes Library on the iPod, but only podcasts can be played.
Message was edited by: wsiul

Yea mine is doing the same exact thing right now. WELL its an older model than yours most likely...

My ipod and also ipad will not sync or be recognised by itune on my windows xp computer when connecting the chord via usb

My ipod touch and also ipad is not coming up or showing when connecting to my computer and hence cannot sync it. The last available sync was about a week ago. Any ideas on what is not happening?

See:
iOS: Device not recognized in iTunes for Windows

My Nokia 5800xm restart itself when being used!

I'm confused about what to do.........my phone keeps restarting itself whenever it's in use, that is...browsing, and @ the same time listening to music. Anyone there!

1. How often does it happen.
2. Have u a large no of msg on the Phone memory or large msg? If yes pls delete them or move them to the memory card.
3. Turn ur phone off. Remove battery, memory card, sim card. Leave it out for 10 min. See if the problem is rectified on starting again without the memory card. If yes scan ur card with a good antivirus. If it still creates a problem with the card only then only option left is format the card. Pls take backup of ur data as format removes it all. U can again scan the data on ur computer for a virus.
4. If it persists without the card too Try restore factory settings- settings only. If it doesn't work try restore all. Remember restore will delete all ur data including contacts, msg, calender entry, gallery files, apps so do create a back up of it first.
5. If even this doesn't work hard reset ur Phone with *#7370# with code 12345.
6. Other option is to reinstall the firmware
either by nokia pc/ovi suite or at authorised Nokia care or by upgrading using ur phone.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Why does my Mac Pro like to restart itself when I opened multiple apps?

I have a 2012 Mac Pro with OSX 10.8.4 and ever snice I brought this laptop it has been restarting itself. Does anyone have any idea why it like to this? It's getting annoying.
Thank you!

SivilayMN wrote:
I have a 2012 Mac Pro with OSX 10.8.4 and ever snice I brought this laptop it has been restarting itself. Does anyone have any idea why it like to this? It's getting annoying.
Thank you!
You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.
Mac Pro

IPad Air restarts itself when switching the apps

I'm very disappointed. I bought my iPad Air in January, the first day I bought it, it already have the restarting problem. I went to the retail store last week, asked them if they can fix it , they checked it and said it's merely a bug and they fixed it. However, the restarting problem happened again right after the day. So I went there again. This time all they did was reset my iPad , which I can just do it at home by myself. But alright, as long as they can fix the problem. But no, my iPad restarted itself again, just couple minuets ago. What's wrong with apple? And by the way, for people who haven't buy the new Smart Cover yet, DO NOT BUY IT.

It's happen again - aftewr 1 or 2 weeks after reseting Network settings - the same issue appear: not able to connecct and wifi and Settings - Wifi screen doesn't appear (Settings is freezing on previous screen).
The only solution: to restart my iPad.
Any hints?

Belkin UPS does not show up when connected to MacPro via USB

I have just replaced my aging DP G4 machine with a MacPro. I added a UPS with a USB connection. It was advertised as being Mac compatible.
After many tries to get the horrible Belkin software to work, I gave up. The worst part is that The UPS will not show up even in the Energy Saver preference pane.
I checked if the USB connection is working OK on the UPS and it seems to work, although it reports itself as "Cypress Semiconductor Serial to USB" in the System profiler.
Any ideas of what I could try to get this to work? As of now, it I am not around to shut down the machine, the battery backup is useless...

I can't offer any real help here other than to say that the Belkin UPS does work with a Mac Pro. I was running one on my G5 and when I replaced that last week with a Mac Pro I simply plugged it in and it worked.
I have never tried to use the Belkin software; I read somewhere on these forums I think that it's rubbish and because OS X supports UPS out of the box I have always relied on that.
I am connected via USB. The Energy Saver UPS panel simply shows the UPS name as "UPS", and in System Profiler itsimply says "Belkin".
BTW, I also have a Belkin UPS on my wife's iMac and it does exactly the same.
I know they work because we have had power outs here and the UPS devices have kicked in just fine.
I am guessing—but this is only a guess—that you may have some remnants of the Belkin software still on your system and that this may be interfering with Energy Saver. I would maybe try to do a finder search (apple+F from the desktop) for "Belkin" and see if that shows anything. Maybe ask Belkin what gets installed so you could check it's all gone?
David

Dell U2711 black screen when connected to Mac via DisplayPort

I currently have a Dell U2711 27" monitor connected to my Mac Mini through DVI (it uses a DVI to mini-DVI adapter at the PC end). However, I cannot get the full resolution of the monitor 1920 x 1080 maximum is offered were the monitors maximum resolution is 2560 x 1440.
I did some Googling and seemed it required DisplayPort connection to achieve this. No dramas. I ordered a Mini-DisplayPort to DisplayPort cable.
I plugged this in and all I get on the Dell is a black screen. The monitor doesn't go into power save mode or anything like that, just displays nothing - an illuminated black screen.
I pulled out my MacBook and connected the cable to that, same deal. The Mac recognises that the cable has been connected (as the laptops LCD goes blue for a second or two while it detects the new monitor).
Any ideas?
I also had a DisplayPort to DisplayPort cable here which was included with the monitor from Dell, which I will test aswell when my miniDisplayPort to DisplayPort adapter arrived.

Yes, that is one means, but...
However, HDMI 1.3 can also carry resolutions higher than 1920 x 1080 - check out http://en.wikipedia.org/wiki/HDMI - not really an option on the Dell monitor though, as it only supports up to 1080p on the HDMI connection. However, there is a thread elsewhere on the internet of a user who forced his Windows laptop to use 2560 x 1440 resolution via the HDMI output and the Dell monitor accepted it!
In addition, so can DisplayPort - as per my original post.
The Apple Dual-Link DVI adapter is plagued with issues and has a lot of faults, so I'd rather avoid it. It is also significantly higher priced than the above option of DP.

FME freezes when connecting Canon HV20 via firewire

Hoping someone can help me out. I'm using a Canon HV20 camera
as a live video stream via FME and every time I try FME will freeze
and my laptop will freeze and I have to restart. My camera settings
are DV standard and it should work.
The necessary drivers for the Canon HV20 are installed and
I'm using a firewire card in my PC laptop that to connect the
camera feed. Restarting several times still results in the same
problems.
Is there something I should modify/check on my system to
ensure it's working correctly?

Some more troubleshooting tips.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

N97 restarts itself when connecting to PC via Mass...

Similar Messages

Maybe you are looking for