N97 software update ready for black not white vers...

is anyone else in the uk amazed that Nokia have released the software update for the N97, but it is only available for the Black not white version of the phone?
I am truly amazed. Its not like they are different phones. . .is it?

I purchased a Nokia n97 in white and after 2 weeks my front screen wouldn't load and I couldn't connect to the internet,the phone I purchased was sim free and cost me 500 pounds,I checked for updates to rectify the problem because after reading on these sites it was a common problem and the update would fix it... Anyway there were no updates so i contacted nokia themselves and i got an email back saying 
"We are unable to provide information on the features for future software updates or product releases ahead of time. All available information on our products can be found from the relevant support pages on our website.
Please note that unfortunately there is no information yet as to the release dates for the Nokia Software updater for the model N97 as product releases are country and market dependant."
wasn't the update supposed to ready for the 1st??...
 i've since swapped the phone (after some faffing about) for a Nokia n97 in black,I turned the phone on and after 5 minutes I got a message saying important updates available,the firmware 11. was available after 5 minutes of me having the phone,i've not moved its from the same shop an i'm using the same sim,why send an email out saying they don't know when its going to be available,why not just put we've done it for the black we just don't know when its gonna be ready for the white!! so far i've had no problems but its only been a day!!

Similar Messages

  • HT4623 If i go to general and look for the software update button, there is not one on my ipad2. What do i do then?

    If i go to general and look for the software update button, there is not one on my ipad2. What do i do then?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • I am really angry that I get this message every time I try to update Itunes.  "The File 'C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi' is not a valid installation package for the product itunes.  Tr

    I am really angry that I get this message every time I try to update Itunes.
    “The File ‘C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi’ is not a valid installation package for the product itunes.  Try to find the installation package ‘itunes.msi’ in a folder from which you can install itunes.
    What kind of gobbledegook is that?  Are you or Microsoft crazy.  Us computer users need simpler instructions.  Or you need to write your programs so that they work.
    Signed,
    Frustrated Apple User
    Dean Weaver

    “The File ‘C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi’ is not a valid installation package for the product itunes.  Try to find the installation package ‘itunes.msi’ in a folder from which you can install itunes.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • HT201412 Perfectly fine working iPad and I attempted to load the software update provided for settings. Now, all I get is a black screen with an, on again, off again apple. Restore? iTunes doesn't even recognize the device. Force quit does nothing. Now wh

    Hello,
    Perfectly fine working iPad and I attempted to load the software update provided for settings. Now all I get is an on again off again apple. Attempted hard reset to no avail. iTunes no longer recognizes the device. So......? what? how? where?
    Thanks, Richard

    And one more point, I am not an Apple user. This is my first experience and have had to learn as I go. So any explanations please break it down for a noob. I am fairly computer geeky but when it comes to Mac or Apple or iAnything... I have zero experience.

  • Software update asks for restart before installing the updates. When restarted password is asked. After the restart the software updates have not been installed. how come?

    Software update ask for a restart before installing the updates. After the restart password is asked. When given the computer is restarted but the software updates have not been installed. How come?

    This article
    http://reviews.cnet.com/8301-13727_7-57400956-263/apple-issues-software-installe r-update/
    explains what might be going on.
    I noted that one of the updates in the list for my wife's iMac was an update to Software Update itself. Probably to fix this very problem. But it wasn't being applied due to Software Update itself not working.
    I considered two solutions.
    (1) Uncheck all the updates except that one update to Software Update. Then after fixing Software Update, apply all the other updates remaining. I did NOT try this approach.
    (2) Download and install the "combo update" for 10.6 -- from here
    http://support.apple.com/kb/dl1399
    I decided to try solution #2. It's a large download, 1 GB, but the whole process took less than 15 minutes. The "combo" update checks and reapplies every update since the beginning of 10.6, so if something is missing or amiss, it gets filled in. It's done manually, by downloading the update, opening the .dmg file, and running the update. When I did this, it fixed the Software Update issue because I then reran Software Update and additional, new updates were found and they all installed fine. Software Update was working as it should. I then ran it a third time and some additional ones were found, also then successfully applied. Finally, no new updates were found by Software Update, which mean everything is up to date.
    I can't be sure if your issue is the same as mine (the bug in the CNET article above) but I'm guessing that the combo update will resolve your issue.

  • HT4623 I'M TRYING TO SEARCH FOR SOFTWARE UPDATE BUT I DID NOT GET ?

    I'M TRYING TO SEARCH FOR SOFTWARE UPDATE BUT I DID NOT GET ?
    I'm using i phone 4 ..for your information.

    Over the air update did not come out until iOS 5.  You need to open iTunes on your computer and connect your phone to it and follow the prompts to update.  Do a manual back before you do that

  • HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

  • Software Updates Missing and File Not opening in Final Cut Pro

    Hi Experts,
    I am having trouble with Final Cut Pro. Here goes:-
    I tried to load up a FCP file called "Overview" in Lesson One of the Apple Pro Training Series book called "Color". The file would not open and I got the following message alert in FCP:
    "File's format is too new for this version of the application".
    I am running FCP 6.0.1 and so went to check for software updates. I could not find any listed for FCP. I did a quick internet search to make sure and found there were indeed updates to 6.0.1.
    So I guess I have 2 problems:
    1. Why won't a file from a book that was published before I bought FCP work on my app?
    2. Why can't I see updates for FCP in the Software Update application?
    I am mega stuck with this. I have read of similar problems to mine on the internet but have found no solution. I hope that you will be able to help me out.
    Thank you all,
    Bob

    Hi Nick!
    Thanks for your reply. I feel kinda silly now but I have been continuously checking Software Update for 24hrs and I just got a new addition to the list which was called "Pro Applications Update 2008-05".
    Seeing something new, I installed it and it upgraded my Final Cut Applications including FCP to version 6.0.5.
    The file then opened.
    I am truly sorry to have taken your time up. As when I posted last time Nick, you were very prompt and helpful.
    All the best,
    This problem is solved for me and I hope all the other people having this problem find this update as luckily as I just did.
    Bob

  • Okay since last apple software update my safari will not open youtube,yahoo or google

    Okay since last apple software update my safari will not open youtube,yahoo or google, an error message comes up saying safari cannot connect to the server.  Can anyone help me with this please?

    Hi Joshua ..
    Check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to:  Open in 32 bit mode  is selected, deselect, quit then relaunch Safari to test.
    If that wasn't the issue, try using OpenDNS.
    Use OpenDNS for better speed, more security, prevents the, "can't connect to server" issue, includes anti phishing filters, prevents browser re directs, and it's free.
    Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
    Click +
    Enter these addresses exactly as you see them here.
    208.67.222.222
    Click +
    208.67.220.220
    Then click OK.
    More about OpenDNS here.
    Topic : Manually provided DNS server addresses are higher priority than DHCP's

  • How do i Install the Software Update Server for Windows 7?

    How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
    I downloaded the software so How do I install it?
    Do I install it all over again or when I have windows open?
    I am using Bootcamp.

    Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.

  • The software update server (nrc1) is not responding

    the software update server (nrc1) is not responding
    I have been receiving this message on my Snow Leaopard iMac for weeks now when I try Software Update ....
    There appears to be nothing in the Communities database about it, my internet connection works fine and always has ... any ideas?

    Some things you can try:
    1. See if software update works from another account.
    2. Boot in safe mode.  See if SU works.  If so, reboot normally and try again.
    3. If those don't work maybe you need to delete the software update cache.
        ~/Library/Caches/com.apple.SoftwareUpdate/
    Note there are two plists assocated with SU but I don't think deleting them will change anything since there is nothing significant in them.  They are,
    ~/Library/Preferences/com.apple.systempreferences.plist
    ~/Library/Preferences/ByHost/com.apple.SoftwareUpdate.XXXXXX.plist
    where the X's are a sequence of hyphenated upper case leters and digits.

  • I cannot uninstall itunes from my computer PC. I cannot update itunes on my computer. I get this message." C:\Documents and Settings\Sally-Anne\Local Settings\Application Data\Apple\Apple Software Update\'iTunes.msi' is not a valid installation package

    I cannot uninstall itunes from my computer PC. I cannot update itunes on my computer. I get this message." C:\Documents and Settings\Sally-Anne\Local Settings\Application Data\Apple\Apple Software Update\'iTunes.msi' is not a valid installation package Try to find the installation package itunes.msi in a folder from which you installiTunes."
    I have tried a serach for the file itunes.msi and nothing comes up.
    Help anyone/
    thanks

    I get this message." C:\Documents and Settings\Sally-Anne\Local Settings\Application Data\Apple\Apple Software Update\'iTunes.msi' is not a valid installation package Try to find the installation package itunes.msi in a folder from which you installiTunes."
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Software Update Page for the Galaxy S4

    Has anyone noticed that on Verizon's Software Update Page for the Galaxy S4 it is displaying update I545VRUDMI1? We are currently at update I545VRUEMK2 which is two updates after the one that they have on the Software Update Page.

    Probably not for a while since they are talking up the S5 having 4.4 and the S3 and S4 not. Trying to screw us over some more.
    Samsung Galaxy S 5: How Does It Compare to the S III and S 4?

  • Software update instructions for Nokia Asha 501

    Hey,
    software update instructions for Asha 501 can be found from here:
    http://www.nokia.com/global/support/software-update/new-nokia-asha-software-update
    By default your phone is set to automatically check for updates every 8 days and you will be notified when an update is available for download. If you want, it's possible to force the update check immediately by switching off and back on "Check via mobile data" setting from the “Phone update” menu. The size of the update is around 8 MB, so it's recommended to use Wi-Fi for the download. 
    Check out also the attached .pdf document and/or this video:
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates
    Attachments:
    Nokia Asha 501 OTA software update onepager v1.1.pdf ‏361 KB

    Dear Nokia Software Employee,
    Thank you for the new nokia 501 update.
    However I am interested to get another new update concerning:
    1) Wireless configuration:
    It will include security mode of 802.1x, and EAP plug-in settings such as EAP-LEAP, EAP-PEAP, etcc....
    2) Keep applications minimized instead of closed:
    Sometimes there are some applications need to be minimized and not to be closed
    Ex: Applications such Athan, Prayers, Quran, etccc...
    3) Some Applications menu not working with screen touch but working with key buttons
    There are some applications that you cannot use the screen touch under the menu
    I will be greatful if the software will finalize the above suggestions
    Thank you and Best Regards
    //Eabdhad
    eabdhad
    Attachments:
    2013-12-04-0275.jpg ‏394 KB

  • The file 'C:\Users\netrgm\AppData\Local\Apple\Apple Software Update\iTunes64.msi' is not a valid installation package

    I am currently at iTunes version 10.5.1.42. It is telling me there is an update. It downloads and trys to install version 10.5.2 but i keep getting this error message:
    The file 'C:\Users\netrgm\AppData\Local\Apple\Apple Software Update\iTunes64.msi' is not a valid installation package for the product iTunes.
    Try to find the installation package 'iTunes64.msi' in a folder from which you can install iTunes.
    The file is in the directory that is looking in, but it doesnt seem to think it is valid. I have tried several times over the last week or 2.

    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Maybe you are looking for

  • BARS with permission denied

    I have CallManager 4.0(2a)SR2b that will install a device pack for an IP Phone firmware, but trying to backup first but when I execute BARS it says that is not enable to retrieve the information, Permission denied. How can I restablished the rights f

  • Preview crashes when starting up

    trying to open either a jpg or pdf... ===== Friday, May 18, 2007 4:38:24 PM America/Phoenix ===== dyld: Library not loaded: /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit Referenced from: /System

  • I look for guider in signing jars

    Hi everybody for what signing jars is good,for applet jars or desktop applications jars??? and how can I use it? please i need the answerer explanations not url to tutorials Thanks to every reader to this topic

  • [SOLVED] makepkg fails because of libqt-mt.so.3

    When I attempt to makepkg a pkgbuild or compile (make) from source, it fails.  This is the final error message from my last attempt at a AUR pkgbuild: /opt/qt/bin/uic: error while loading shared libraries: libqt-mt.so.3: cannot open shared object fil

  • VBAP - ARKTX is not stored as per Sy-langu

    Hi We have different users viz.  login in English,  Login in Arabic. We have maintained the material master description in both the language. When we create the sales order,  the material master description in VBAP-ARKTX  is not stored as per Sy-lang