N97 unlocking keypad freezes

Hey
Just wondering if anyone has a similar problem with their N97. When I go to unlock my keypad with the slide device on the site my phone will often completely freeze up and I will have to remove the battery. This has become rather annoying now. Does anyone have a similar problem or have any advice?
Thanks

Hello Tony16,
Welcome to the blackberry support community
Please perform a battery pull, while devcie si on and re0nsert it after a min, if this doesn't work for you.
Please reload OS.
Thanks..!

Similar Messages

  • While browsing the internet with my iPhone 4S the screen goes black and it looks like it's turning off, but it pops up to the unlock keypad screen.

    While browsing the internet with my iPhone 4S the screen goes black and it looks like it's turning off, but it pops up to the unlock keypad screen. It has plenty battery and I was wondering if it is an issue of using too much of the iPhones RAM or not. I have no other apps open besides Messages. I am getting kind of worried as it started around two weeks ago and it has gotten increasingly frequent.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these steps in order until the issue is resolved.

  • N97 unlock button fell off

    guys today my n97 unlock button fell off ...i did google search and found out thats a common manufacturing defect in n97 ...so please can anyone tell me any solution for this thing...this phone is really getting on my nerve now..

    Same thing happened to me 2 weeks ago (phone around 5 months old), sent in the phone for repair via my service provider and was advised that the repair failed there quality check and they gave me a new handset
    Therefore if its still under warranty i recommend you get it repaired as it should be done for free.

  • How to unlock keypad with forgot password in nokia...

    My little brother has a Nokia 3120 phone. He entered password to keypad lock. But now he has been forget. Is there a way to unlock keypad. Plese help.

    If you forget or lose the lock (security) code, try first the default lock code 12345. If it is not accepted, contact the nearest Nokia Care point to unlock your device.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • My iPad2 won't turn on. It will act as if turning on but when I slide to unlock it freezes. I have tried to reset and it will not. Any ideas?

    My iPad2 won't turn on. It will act as if turning on but when I slide to unlock it freezes. I have tried to reset and it will not. Any ideas?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • What to do to unlock keypad without side key in no...

    Anyone please let me know, how to unlock keypad withour moving side key in nokia 5230 or 5800. I was keypad unloack feature like iphone have by touching screen something. I broke phone'e side key.
    please let me know as soon.
    I will appreciate your responce.
    thnks

    Slide unlock can do that. There is a setting there, where you press an icon in the middle of your homescreen. It would look either like an apple, or a cd, depending on the slideunlock theme. It would then show the "iPhone" lockscreen. You can leave it at that.
    There is also something called pocket sensor. When it is in your pocket or when anything covers the proximity sensor, it is locked, and the moment you take it out of its cover/pocket, it is unlocked. There are lots of apps out there.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • How to unlock keypad with slider ?

    hy there,
    i have question about n95.
    when i move down slider- phone keypad locks after 5 sec. its ok...but when i want to unlock keypad and move slider UP nothing happens, why? where is the settings or i need 3rd part application ?
    Nokia N95 v.20.0.15 + 2 Gb microS + RotateMe beta7 + Nokmote beta1+ ShutUp beta1

    The N95 should unlock the keypad automatically when you open the slider (or the lens protector for that matter). The sensor would appear to be working since the keypad is locked when you close the slider, so it's probably a software issue. I'd start by uninstalling ShutUp beta, which is installed according to your signature.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Ipod Touch is disabled.  Forgot password.  What can I do to unlock keypad?

    Ipod Touch is disabled.  Forgot password.  What can I do to unlock keypad?

    Connect it to your computer and restore it.

  • Help, I can't unlock keypad on E71

    Hi Guy’s,
    I have a little problem that seems simple but its driving me mad. I have just got a new E71 and the first time I turned it auto key locked it self. When I follow the manual to unlocking the keypad it wont work. I have pulled the battery out and replaced it and it is still locked. If someone can help me that would be much appreciated. All the buttons seem to be working and I am starting to think it's software related. I have had the phone now for a day and cant even gain access to the thing.

    I have just checked the E71 User Manual. To unlock keypad you press the left function key (left most key just below display) followed by the right function key (the right most key just below display). This should work.
    User manual can be downloaded from
    http://www.nokia.ie/link?cid=EDITORIAL_1075996
    Message Edited by cjlim on 12-Sep-2008 02:35 PM

  • New Unlocked Centro Freezes when recieveing calls

    Please help.  My New Unlocked Centro Freezes when recieveing calls!!!  I have not loaded any additional softwares or even connected the Centro to any computer for a sync.  Please Help!!!  What could cause this?
    Thanks,
    Chuck
    Post relates to: Centro (Unlocked GSM)

    take a look at http://discussion.treocentral.com/showthread.php?t=166552&page=5
    Post relates to: Centro (AT&T)

  • Iphone 4 keypad freezing after ios 7 upgrade

    iphone 4 keypad freezing after ios 7 upgrade

    Two methods that seem to work:
    Settings > General > Reset > Reset All Settings
    OR
    Settings > iCloud > Documents & Data: OFF

  • Keypad freezing and unlock screen freezing also complete freezing in texts and Internet and then kicking me back to main screen

    The keypad an unlock screen will freeze completely and I have to turn off my phone to unfreeze also when in a text or on the Internet it will freeze and kick me out of what I am in and go to the main screen. This happens multiple times a day an the phone is brand new. It's completely updated and I exit out of running apps all the time and hook I up to iTunes

    Try to reset the device by pressing the Sleep/Wake button and Home Button at the same time for ten seconds until the Apple Logo appears. Note: No data will be lost

  • Centro Keypad freezes

    Hi, Ive got my new centro unlocked GSM and am having a lot of prblems with its keypad (all the buttons from the screen down) spontaneously freezing. Though the centre button of the five way navigator does seem to respond under certain conditions. When the screen turns off, be it during pTunes playback or power saving then any associated button opens up the respective application perfectly but then nothing works. I can only turn the screen on using the red button but not off. And this problem goes away just as spomtaneously as it comes and it is quite frankly ruining my day. Anyone got a solution to this?
    Post relates to: Centro (Unlocked GSM)
    This question was solved.
    View Solution.

    Well after the issue listed above another issue presented itself. The keypad backlight started blinking with a frequency of about 1Hz and simultaneous fluctuations on the top edge pixel display were there as well. So i placed it like this for one day to completely drain the unit and it's secondary backup. After that everything went back to normal and evenm the hard reset is working fine. I am convinced the problem was intrinsic and hardware related since after the drain everything went completely back to normal. I would try to drain the battery after backing up your RAM. Hope it helps.
    Post relates to: Centro (Unlocked GSM)

  • N97 Numeric keypad on call problem

    Hi All,
    Quick question. When you call a company which has an automated IVR, sometimes you have to enter not just numbers but also letters. The touchscreen keypad which comes up on the N97 while on a call can enter numbers fine but displays no letters above the numbers (as per use with T9) is there any update or way to adjust this to display the letters above the numbers or is it a case of guess work?
    Thanks!
    N95 | v31.0.017 | Wish I never updated the firmware

    Just after you dial the number and begin the call the lower right-hand soft-key on the touchscreen says "Dialer".
    Press this and the keypad comes back up for you to use.
    Enjoy!
    Message Edited by rdcinhou on 29-Aug-2009 09:39 AM

  • Keypad freezing and showing symbols

    I have a blackberry 8520 and it suddenly just freezes particularly when i use the letters T and O. a set of symbols begin to appear where the letter T or O was typed and then the phone freezes. After multiple times pulling out the battery, it finally works, and then freezes again. The keypad and trackpad do not respond, unless heavily pressed on. WHY is this happenening out of the blue? My phone has never been near any sources of liquid and the only pressure applied to it is when my phone is in my pants pocket. 
    Please can someone tell me how to get rid of this.
    I went to a store and they performed a master reset. How do you perform this reset on  the 5.O software? ( im not talking about a memory wipe,im talking about restoring the phone back to how it originally was)
    Hopefully someone has an answer
    thank you ! 

    tarana22 wrote:
    I went to a store and they performed a master reset. How do you perform this reset on  the 5.O software? ( im not talking about a memory wipe,im talking about restoring the phone back to how it originally was)
    Hopefully someone has an answer
    thank you ! 
    Hiya!
     Those are one in the same really.
    I would recommend trying a Clean Reload of your OS using the DM and see if that gets it.
    Let me know
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

Maybe you are looking for

  • Error in creating schedule line aggrement through BAPI

    Hi All , I want to create schedule line aggrement (VA31) by using BAPI / FM . I am using " SD_SALESDOCUMENT_CREATE" FM  . Here i am getting error in output when i enter shchedle line data in input . Error is given below . E V1                   434 N

  • HT202213 How I recovery my old picture back to my Iphone from my computer

    How I recovery my old photo to my Iphone

  • VENTURE DETAILS NOT DERIVED FROM 0001

    while posting through F-43 a vendor getting credited and a bank commission a/c (balance sheet a/c) getting debited where after simulating and posting the document at the time of saving it is showing ' VENTURE DETAILS NOT DERIVED FROM 0001'. Is it due

  • IPod 5G, iTunes 10.4, Album artwork, Vista

    Hello there, I own an iPod5G (60G), connect to a Vista PC (yes, I know) through iTunes 10.4. I tried to add albums artwork to show on the iPod, to no result. Practically speaking, I have successfullyf added the artwork to the tags (through TagScanner

  • Not recognizing my simcard

    My iphone will not recognize my simcard, not even any other that I try, witch means it must be up to the phone. This happended when I was supposed to update my iphone, it suddenly blocked, and now it will not configurate when I try to restore it. Wou