N97 USB Connection – Applications saved on or acce...

Hi all,
I am using Nokia Messaging and the Facebook application as content widgets on my “home page”. The Nokia application looks for emails that are stored on my mass memory drive (I changed the settings), and the Facebook application has also been installed there. Each time I attach the USB cable to my phone and connect to my PC to charge the E: Mass Memory becomes unavailable – this disables the connectivity for both these applications. In order to access FacebookB again, I need to re-add this application to a home page "slot" and login once more. In order to access Messaging, I have to change the setting of stored emails – which defaults back to C: after the mass memory has been accessed.
When I connect the USB cable, this happens if I select Data Transfer, PC Suite, or nothing at all and just cancel.
Is this normal behaviour? Is there any way to avoid this?
CheersHeath.

---- Is there any way to avoid this?----
Other than using C drive to store Facebook and my messages/emails of course...

Similar Messages

N97 USB connection

Is any having problem with the USB connection? Problem : PC suite detects N97 but cannot transfer file from PC to N97, but USB charges the phone. I tried to reinstall the pc suite and reinstall pc suite support, its still not working. Any idea?

if you are on v10....then that is exactly the issue. the phone is not always recognized by nsu or pc suite. all you can do is continue trying time and time again eventually one of those times you phone will be recognized. this is a major issue of the v10 .. firmware
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

N97 usb connectivity issues

Hi,
I've had my N97 for about a week now and am having some serious USB connectivity issues with the phone in that when I connect to my PC, on the first occasion it will recongnise the USB connection, but if it gets disconnected it subsequently won't reconnect. This means I am unable to install the latest version of the firmware which appears to address some USB issues. I've tried both version 1 and the beta 2 Ovi suite.
Any ideas??
Thanks,
Trev

Hi!
Me and my friend at work got the same STUPID problem. We unpacked our phones, connected them and upgraded FW and got everything setup (mail, music etc.)
Now I got back to work and thought that it was no problem plugging in my phone and update it with some new music and contacts...well was I wrong...the stupid 7000 SEK phone won't even take the electricity and charge...I get no connection to the PC...it worked fine 2 days ago...
So I try to install the stuff on the CD again, no luck....I tell Windows to add new hardware, nowhere on the Internet and nowhere on the CD are there drivers to be found...
So here I am with a million dollar phone I can't connect to my PC...what the hell is this???
Looking in this thread and seeing the answers I should not hold my breath waiting for this to be fixed...but my question is: Will I have to wait for a FW update for this phone to connect to my PC?
Regards
//toppis

How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one. Now, however, with my Ipad version 2 I can no longer get this to work. Can anyone help? Thanks.

Hi,
HP do not provide any USB connection solution for iOS.
As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
http://www.activeprint.net/support/
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Since upgrade to Windows 8, cannot save .rdp files under the Remote Desktop Connection application on the Desktop

Since I upgraded to Windows 8, I am no longer able to save individual Remote Desktop Connection files as .rdp files. I am talking about the traditional Remote Desktop Connection application on the Desktop that was in previous Windows versions, not the
Remote Desktop App from the Windows 8 store.
When I try to click on the Save button I get "An error occurred while saving to file"
When I try to click on the Save As button I get "Unable to open connection file" with the file address being where I tried to save it with the file name at the end.
Also when I upgraded to Windows 8, my .rdp files disappeared from my Documents folder.
I need to create different .rdp files for different programs that my employees get into on my server. Now I have to hand type all the info each time into the Programs tap on the Remote Desktop Connection window, because I can't save to an
.rdp file.
I like the Remote Desktop App from the Windows store but it won't let me designate specific programs to use using standard dos notation (ie c:\program files\ etc..). It just goes to my server desktop.
I want to promote Windows 8 to my employees but I need either .rdp files for the traditional Remote Desktop Connection or the ability to open specific programs using dos notation in the Windows Store Remote Desktop App.

I know this is an old post but others might still be having the problem. Here's what I did.
Create a new text file and open it in notepad. Copy the below into it and edit for your environment. (IP, screen size).
screen mode id:i:2
desktopwidth:i:1920
desktopheight:i:1080
session bpp:i:24
auto connect:i:0
full address:s:192.168.x.x
compression:i:0
keyboardhook:i:2
audiomode:i:2
redirectdrives:i:1
redirectprinters:i:1
redirectcomports:i:1
redirectsmartcards:i:1
displayconnectionbar:i:1
username:s:USERNAME
domain:s:DOMAIN
alternate shell:s:
shell working directory:s:
disable wallpaper:i:1
disable full window drag:i:1
disable menu anims:i:1
disable themes:i:1
bitmapcachepersistenable:i:1
use multimon:i:0
winposstr:s:0,3,0,0,800,600
audiocapturemode:i:1
videoplaybackmode:i:1
connection type:i:7
networkautodetect:i:1
bandwidthautodetect:i:1
enableworkspacereconnect:i:0
allow font smoothing:i:0
allow desktop com:0
disable cursor setting:i:0
redirectclipboard:i:1
redirectposdevices:i:0
drivestoredirect:s:*
autoreconnection enabled:i:1
authentication level:i:2
prompt for credentials:i:0
negotiate security layer:i:1
remoteapplicationmode:i:0
gatewayhostname:s:
gatewayusagemethod:i:4
gatewaycredentialssource:i:4
gatewayprofileusagemethod:i:0
promptcredentialonce:i:0
gatewaybrokeringtype:i:0
use redirection server name:i:0
rdgiskdcproxy:i:0
kdcproxyname:s:
You don't need to worry too much about what's in here. Save the text file as
filename.rdp then rightclick on the file and select edit. The familiar GUI rdp session editor will open. You can make changes in the GUI and
save or save as a different session.
Hope this helps.

Problems with PC Suite 7.1.30.9 USB connection

Ok, So I've been having trouble the last 2 weeks or so getting this to work. I Correctly installed the PC suite 7.1.30.9 on my PC (windows vista home premium 32) some time back. It used to work well with my old N95 8GB, but after I got the N97, for the week it worked fine and would connect in any compatible mode. But then I started getting an error whenever I connected my N97 or my N95 on PC Suite, It could not detect any phone. When I tried adding a phone using PC Suite, the options for what kind of connectivity I would like to select with my phone were not even highlighted and I was getting an error message about infra red and trouble connecting. I re-installed evrything and then started getting this error message "Connected in non compatible mode" even though I had selected PC Suite on either phones. I tried restarting my phones and PC, but still got the same error. I tried uninstalling and re-installing PC Suite, nokia connectivity cable driver, PC connectivity manager and starting again, but still got the same error. I Even tried that again, but with an older version of PC Suite (6.85.12.0) but no luck.
The funny bit is It connects easily with no trouble when I use bluetooth but doesn't work work with the USB cable. I know its not the phone because Niether the N97 nor the N95 work correctly with USB.
Can someone help me, because Bluetooth is way too slow when I'm trying to transfer loads of different data and using my phone as a modem.
can't wait for n97 successor
Solved!
Go to Solution.

Hallo,
i have problem with N97 and usb connection.
Few days ago i was unable to connect my n97 by usb, before it was working fine.
Nothing happend. by bluetooth it was all ok.
I change drivers in computer ( vista ) i try on another one ( xp ) and still nothing.
Then i make a hard reset on n97 and after that when i connect by usb it was ok. but...
But...after disconet usb and n97 turn off and on and try to connect via usb - the same problem???
What is going on???
Any ideas???
Thanks a lot.

Problem with the USB-connection after upgrade to P...

Hello to everybody!
After upgrading PC-suite, I can't establish a USB-connection with the phone.
Here are the facts:
1) My phone is the E90. Latest software installed (300.34.84)
2) PC-Suite version 7.0.9.2 english. I also tried the greek version, same problem with it also.
3) Nokia Connectivity Cable Driver 7.0.2.1. I also installed manually a previous version of the driver (7.0.2.0), but this didn't solve the problem.
4) I didn't have any problem with the older version of PC-suite.
5) I don't have a problem with the cable because the data-transfer-mode works fine.
6) Prior to any installation attempt, I always first uninstalled PC-suite and Cable-driver manually with the windows-xp uninstall program. This was not the fact, only in my first attempt, where I upgraded the pc-suite from inside the program itself.
Please help, because I can't backup and this is very important for me!
Solved!
Go to Solution.

Thank you all for your suggestions but nothing of the above worked for me.
After of hours and hours of installing and uninstalling of several versions of the pc-suite I solved the problem as following:
1) Uninstall manually (windows - control panel - add/remove programs)Nokia-PC-Suite, Nokia Connectivity Cable Driver AND PC Connectivity Solution!
2) Restart PC
3) Download and install the new version of Nokia-PC-Suite.
The tricky part is that you have to uninstall the application called "PC Connectivity Solution" manually and since the title of the application dosn't include the Nokia-Name you have first to find out that this program is Nokia-related!
Once again, thanks to everybody who took the time to make suggestions and especially to cricfancy who made me aware of the fact that PC Connectivity Solution is a nokia application!
Finally, I would like to make a statement for Nokia:
People, if you are not sure about an update then keep it in beta and don't make it available to the public!!! I lost hours and hours on search and made countless installs and uninstalls to find out what was wrong. Under the line, I had made no mistakes in my update from the start and the whole problem was based on your software! This is not acceptable!

My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). How do I fix it?

My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). I have tried unplugging the devices, restarting the computer, selectively unplugging and plugging in the devices, closing and opening the relevant applications (iTunes, iPhoto, etc). I have tried using different USB cables.
It's like all of a sudden the synching service stopped functioning or recognizing these devices for some reason. The other ports work just fine (monitor).
The only USB-connected external device that appears to be unaffected is the USB SuperDrive and it works on all the USB ports into which I plug it.
How do I fix this?

Open Console in Applications>Utilities & see if there are any clues or repeating messages when this happens or doesn't happen.

Error when reopen USB connection without physical unplugging USB connection

Using Labview 8.5 to communicate with an USB device based on AT91SAM7S64 controller.
I has written a labview application that talks to several units and it works good as long as i dont close the USB connection
I wants the application to start talking to all USB devices that are already connected, at the moment i must reconnect all USB connection every time I start the Vi.
If a try to reopen a closed USB connection I got an timeout error when I read data from the device
to illustrate the problem I made a dummy test program. (Added as Attachment as jpg and vi)
Senario 1:
If i plug the USB connector into the computer and start the vi the first sequence works fine.
The second sequence fails.
Senario 2:
If i plug the USB connector into the computer and start the vi the first sequence works fine.
If i unplug and plug the USB connector between teh two sequences both works fine
Senario 3
If I remove the VISA close from the first sequence.
If i plug the USB connector into the computer and start the vi the first sequence works fine.
both sequences works fine without needing to unplug the USB connector.
Questions?
Does the VISA close command send a message to the USB device? can this be the reason for the need to replug the connection?
Does it exist a method to reopen a USB connection that has been closed?
All help is good help :-)
Attachments:
USB_error_example.jpg ‏101 KB
USB_error_Example.vi ‏30 KB

Hi Again,
I have tried to recreate the issue when using multiple runs of the same program but this time I have been unable to. Mine does manage to find the device again.
I have had a word with a few people and they have proposed a solution that would involve writing the references to the registry or a configuration file. They suggest:
First Run: The program will look to the registery/file to try and find the references. It wont find any so it will open the VISA references and write them to the registry. This should not close the references at the end of execution.
Run n : The program will look to the registry/file and find the references and use these for VISA operations.
First Run after Reboot: The program will look to the registry/file and find the references but will find that they are invalid so it will open new references and write these to registry for subsequent runs.
Functions for writing to the registry are under connectivity>>windows registry access VIs and have all the usual LabVIEW help files associated with them.
I hope this helps! let me know how it goes.
Message Edited by James McN on 08-07-2008 02:10 PM
James Mc
========
CLA and cRIO Fanatic
wiresmithtech.com/blog

N97 mini connectivity issues

How do i make N97 mini connect to wi-fi automatically when i'm at home and packet network (3G etc.) when no wi-fi is available? Also how to make it prompt before connecting to packet network, as i get charged for it?
This phone has got a mind of its own at the moment, Facebook widget tries to connect to packet network even when an existing wi-fi connection is extablished (and spotify is using it). I get a beep every time it fails...very annoying!!!
In fact ALL widgets try to establish a packet connection when there's no need and i simply cannot change any settings to make this device work sanely.
Thanks in advance.

Thanks for your replies.
I have gone into Settings > Connectivity > Destinations. There are two access points under "Internet - "BeBox" (Wi-fi) and "O2 mobile Web". Now if i click on wi-fi > Options > Organise > Change Priority, the phone gives two options at the bottom of the screen - "OK" and "Cancel". I click OK. Nothing happens. Wi-fi still priority: 2, O2 mobile Web priority: 1. Tried many times, can't change it. Am i doing something wrong?
Also i set the Wi-fi to "Use Access Point: After Confirmation" from within Destination > Internet > Wi-fi connection > Options > Edit. However given about 30 seconds the phone has connected again to the wi-fi as seen in "WLAN" where it says "Connected to BeBox" (my wi-fi). But it never promted me if i wanted it to connect?? Of course i realise that it connected again also if i try to edit it again where it says "Access point is currently in use: Unable to Edit".
Previous to these changes described above i had set the home screen to "Content to offline mode". No other applications are open. If i set the home screen to "Online mode" i get repetetive error messages "Internet: Unable to connect, try again" which are sometimes very frequent so thai can't interact with the phone until they've stopped. Even with wi-fi at priority: 2, the phone does not attempt to connect to wi-fi once the "O2 mobile web connection" fails, it simply gives this error message. This happens even when there is an active and current connection to "BeBox" under "Connections. i.e. a good wi-fi connection.
I don't understand what this phone is going, i would really appreciate your knowledge and advice because this device behaving unlike anything i've ever used.
(I do intend to get the bolt-on etc at some point but at the end of the day i'd still like to know what my phone is doing and when.)
Thanks in advance.

New Officejet Pro 6830 will not print via USB connection. It scans great to PC. It copies.

New HP Officejet Pro 6830 for user to have local USB printer/scanner at desk. User runs win 7 64 bit on a network. Raninstall through setup.exe. Followed steps, connected printer via USB when it said to and it detected it and finished install.You can use HP Scan software and it scans to the PC perfectly. It will not print from any application or even a testpage from the Printer Properties page. If you go to the maintenance application it will print status and test page. If you run HP Scan and Print doctor it does it's thing, gives all Green Check marks and lets you print a test page fine, but it stillwill not print even a test page from the printer properties page (start/Devices and Pritners/right click on Officejet Pro 6830, select Printer Properties for Officejet Pro 6830 (not the Fax 6830), and click print test page. It does not seethe printer. It is a networked PC and has network defined HP network printers as well but user wanted a printer/scanner at his desk. I actually took the unit and connected to my laptop which is same win 7 64 bit platform and it does the same thing. I disable the virus protection to do the install so that is not an issue. It clearly sees and installs the printer, andlike I said the HP Scan works fine so it is connected via the USB to the PC, but it will not print. I have tried to install from the CD, and removed device and tried to install from the new downloaded drivers as well and it just does not want to print.I have conected to different USB ports, and like I said actually tried it on a different PC and had same results. Guidance certainly would be appreciated.

Hi , I see by your post that you can scan, but are unable to print over the USB connection. I would be happy to help you.
I have provided a document for setting Security permissions for printing to see if that will help. If the issue persists, reinstall the printer on the Administrator Account to see if you have the same results.Unlock Hidden Administrator Account and install the printer on this account: Go to your Start menu and under the 'search programs and files' box type CMD. CMD will populate as a search option above, just right click on it and 'run as administrator'. Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter. Next, close CMD and restart your computer. When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it. If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked.Under the Administrator account, install the printer software. Test the printer. To turn off the Admin account start back at step 1 and type in net user administrator /active:no.Please let me know the outcome. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

USB Connection Issues

Have the 8330 Curve and the Blackberry Desktop application. It has allowed me to install apps such as opera mini, a stock portfilio app, and can import my calendar items. I now see 'connecting' in the lower right corner. Do not see anything on the desktop app that I see as abberant. What would I need to check on the device to troubleshoot?

Hi PhilPense,
To troubleshoot any connectivity issues with the BlackBerry® Desktop Software, please have a look at the following KB article. Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry smartphone. www.blackberry.com/btsc/KB00125
Hope this is helpful.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

323 serial port through a USB connection on an iPad

Does anyone know of an app that will drive a 323 serial port through a USB connection? It must have universal application, not just for Cisco routers.

you can download latest installer from here
* getfirefox.com
then you can install this to any pc or carry anywhere

Solve Problem with USB Connection / Read this it i...

i can not load maps on my n97 mini. the error 'usb connection lost...' show on the screen in map loader but at the first day i had no problems.
i wonder why. i look for driver, ovi suite, pc suite, usb at the pc, read in the forum and many more. but nothing solve the problem. after 2 days i use accidentally the original cable which comes with the nokia n97 mini (it is a ca-101) and all my problems are gone ! bevor i use an 'old' ca-101 cabel from my n82 and i can not upload a map but the handy is shown in the pc system with all drivers and no problems. only loading big megabytes data on the handy crashes the usb connection. with the n97 mini ca-101 cabel no problem with gigabytes. i look for another ca-101 cable from the 6220 from my wife and i have the same problems (i never used bevor this cable for a connection to any handy ! it was brand new !). it seems that 'old' ca-101 cabels do not handle big data with the n97 mini. i look on the gold spring clips in the micro usb and could see that the are a little smaller and not so high in the jack in the 'old' cables. all three cables are original from nokia and not from china ! if you are also problems look on the produkt id on the plastics. if the letters are gold you have a cable like my n97 mini cable, but if the letters are black on a silver button you have an 'old' cable.
i hope i can help another with this maniac problem
greetings

I can verify this on win7 with latest PC suite.
I was using the cable that came with my 6500s as I didn't want to tackle the rats nest of wiring behind my pc.
This cable is a ca101 with silver writing on the plastic tab, made in China.
Using this cable, my 6620c would not complete a backup, it would just sit for hours on 2-4%.
Tested with the ca101 cable that came with the 6620c (gold writing, made in Thailand).
This time the backup completed in about 2 minutes.
Thank you so much for finding this, it has been driving me crazy!

USB connection for iphone 5 hotspot is not working

I am using OS X Lion on my MacBook Pro and all of a sudden it is not recognizing my iphone 5 as a hotspot using the usb connection. It does connect using bluetooth. Any suggestions?

Hello there, mcMlast.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with no sound from the speaker on your iOS device:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Learn more about troubleshooting iPhone hardware issues.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

N97 USB Connection – Applications saved on or acce...

Similar Messages

Maybe you are looking for