N97 version 2.0 problems

I am with 3 mobile and have waited for version 20 to be released and now that it is i want the old one back!
firstly and the main problem is that it wont connect to the internet now, through 3internet or the wifi, however the youtube app still works??? Also when i recieve a message the screen doesnt light up/ turn on, and when the phone is locked you get no response from pressing the 'volume' keys on the side.
However i have numerous other problems with the phone, the camera lens is scratched and 3 refused to replace it saying it was my fault and there is no design fault, and also along the top and right of the screen there is a dark grey line that is clearly visible, oh and there is a dead pixel but that isnt major.
Nokia need to sort their act out shipping a £400 phone with all these stupid faults and bugs!!!!!!!

kman00 is correct a hard reset should solve your connection problem, and the camera scratch problem is an acknowledged problem and Nokia care centres have been told to replace lens covers under warranty, Google your local one and take phone there for a fix.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain.

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

Ralph, Thanks for replying. There where no received SIP messages at all just the INVITE being sent but I have made some more progress. The mini does indeed just work. I can do everything that you are supposed to do to other ichat users on the internet. Very nice.
The imac is still playing up but I have got further. I had peerguardian2 installed which unknown to me doesn't need to be running to prevent you for accessing 'barred' IP addresses. snatmap.mac.com is barred in the lists! I discovered this when I saw one of your other posts showed how to turn on terminal logging for ichat. Now that I have turned off peerguardian2 (using the disable filters option) I can make calls to the testbot and see the adverts. I have even done a video conference with the two testbots. I will just uninstall peerguardian2.
However, I can not get a AV chat working to a real user....
In response to your suggestions:-
I have tried all the options for quicktime streaming but will try 1.5Mb/s again.
The ichat bandwidth limit is set to "none". I am in New Zealand and I have standard ADSL (not ADSL2+) 7.6M down 512K up. The mini config is also set to none.
Internet sharing is off.
I have had parallels on the machine but the two interfaces that it installed "Parallels Host-Guest" and "Parallels NAT" are configured 'off' and show as not connected. Is this enough? I will uninstall parallels and see if that helps since I don't use it. I also have VMware's thing installed but that doesn't seem to add any interfaces.
I need to capture a full trace of the imac to other ichat user to see what is happening but will update when I have does your suggested changes or have a trace
Thanks again

SAFARI 6.1.3 update to Reader 11.0.07 - cannot open pdf files that are presently on my computer. Previous version had no problem. Any ideas?

SAFARI 6.1.3 update to Reader 11.0.07 … cannot open pdf files that are presently on my computer. Previous version had no problem. Any ideas? (Here is the message: Adobe Reader could not open 'Digital_Holiday_Cookbook.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Thank you Pat!!!
Craig Ekonomos
[email address removed]

Have Adobe Captivate 6 (not interested in upgrading)- Struggling to publish a simulation in a format that QMP can pickup - QMP needs a qml file. previous versions had no problem all had tick boxes for QMP in the Quiz - Reporting Settings but this version

Have Adobe Captivate 6 (not interested in upgrading)- Struggling to publish a simulation in a format that QMP can pickup - QMP needs a qml file. previous versions had no problem all had tick boxes for QMP in the Quiz - Reporting Settings but this version does not have. If i publish to Flash QMP does not see the file.

Re:
The quiz review button is inconsistent - sometimes it shows the ticks and crosses other times it doesn't - did you find a solution? I'd dearly like to be able to tidy up the ticks!
Thanks
Sharon

After downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring.

after downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring. I do not know how to fix this problem so I always return to the old version.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Hi. I can install Adobe Flash Player plugin as i usualy did since 5 years. The problem is that firefox is always asking fo it if i i had never install it. I've tried to install firefox newer versions and the problem pesists. Thanks.

Hi. I can install Adobe Flash Player plugin as i usualy did since 5 years. The problem is that firefox is always asking fo it if i i had never install it. I've tried to install firefox newer versions and the problem pesists. Thanks.

Hi, glad that worked for you. Also thanks for the explanation as how you came about this. Yes, from my understanding any Install of the CS5, even a trial version Installs the 10.1 (beta/prerelease) versions. It is not clear to me or others why the 10.1 was used in the CS5 instead of the latest version (10.0.45.2). My only guess is that the 10.1 is very close to being released as a shipping version (final release) to the public. The 10.1 had a target date of the first half of 2010. Perhaps that was the reasoning. This is just my opinion:-)
As I said, many users are having this problem, not just with the CS5, but they Install the 10.1 thinking that will solve whatever problem they may be having with the latest version.
Your thread is very helpful for other users that may be having the exact problem that you were. For this reason if you marked your thread as answered, they would read it first.
Thanks,
eidnolb

The new version of iTunes does not recognize my Ipod-prior to this version, had no problem, Ipod showed up as list under the Imac library. Now getting synch must erase setting! Help

The new version of iTunes does not recognize my Ipod-prior to this version, had no problem, Ipod showed up as list under the Imac library. Now getting synch must erase setting! Help

well nobody bothered to give me a hint on what to do, maybe because the problems with the new version of iTunes are really a lot, there is an enormous amount of people out there that have all sort of different problems including mine so I have decided to return to the previous version which works fine and wait untill the apple people come up with a decent product ....

N97 v2.0 Gallery problems and missing ringing tone...

Hi!
I had removed all of my photos an mp3 files from my phone before I updated it to v20.
Now I'm facing two problems:
1st:
It still shows me lots of photos in the gallery (which have been deleted from memory), unfortunately, I can't delete them there. And i can't force the gallery to refresh those items.How do I get them out of there? It's freaking me out to have more than 100 items in the gallery, which aren't there any more.
2nd:
I separated my contacts into four different groups. I'd like everyone of them to have a ringing tone of their own. So I copied four mp3 files to the internal mass memory. Unfortunately, two of the files appear only in the music player (which can play them without problems), but I can't choose them, when I'm in the contact group settings. Any ideas?
Greets,
patrese
6110-->8210-->6510-->6230-->6288-->N95-->N97-->E7

I updated to Firmware V2.0. It all seemed to go well and the N97 seemed to be fine afterwards (all the applications worked, etc.) It wasn't until I made a call that I realised there was a problem. I could no longer make or receive calls! If I dialled any number (from Contacts or using the Dialler) the phone said 'Not Allowed.' I tried reloading the firmware but it didn't cure the problem. Texting worked fine. I tried Restoring Factory Settings, a Soft Reset and then a Hard Reset but on all attempts the phone said 'End All Active Calls and Connections First.'
Same problem as you I think. Here's how I solved the problem:
Hard Reset *#7370# (it didn't work straight away as each time I tried I got the message 'End All active calls and Connections First'. This can be cured by removing all widgets from the Home Screen.
Having completed a Hard Reset I checked the firmware version on my phone *#0000# and found V2.0 was still installed.
I then restored my data to the phone from my Backup using Ovi Suite. Unfortunately this left me back at square one - unable to make or receive calls! The trick is not to restore everything.
Repeat the steps above until restoring from Backup. Check all items except 'device settings and applications' and carry out restore.
I did that and my phone is working perfectly. I have had to manually re-install my applications but everything is working fine.
Give it a try. Good luck!

N97 mini key lock problem

Hi there NSeries experts!
I couldn´t find a topic related to my question,
so here´s my post:
I´ve got a little problem with my N97 mini
(type "RM-555" software-version: "11.0.102"):
The key lock button at the side of the phone
does not work properly in my eyes.
Sometimes - yes, it does not show up every
time you use it, only in about 50 % of usage -
when you use the button it works "back and
forth". That means, if you wanna lock the phone
it gets locked and then directly unlocked again,
although the button has only been used once.
Same thing sometimes the other way round:
The phone is locked, the button is used, the
phone unlocks and directely locks itself again.
It is not the worst bug I can imagine but after
a while it is quite annoying.
Does anyone have an idea what this is all
about? Do you think it is more likely some
hardware defect or rather more a software
bug?
Thanks for any help!
If you need further Info about the phone,
software etc. just tell me...
Tom.

Then if you want to try everthing before going to nokia, first try reset *#7370# , backup your data first. Still no success? Reflash with same firmware version via NSU. (back up your data in both cases)
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

N97 - Ovi Suite Connection Problem - Windows 7

Hi all.
I have N97, firmware version 20.0.019 (t mobile - **bleep** with the old firmware updates.... )
I am running windoze 7 with all updates etc.
I have the latest version of nokia Ovi Suite and the latest version of Nokia PC Suite.
I am reluctantly trying to get used to using ovi suite instead of PC ever since Nokia's update page seemed to suggest I should be using OVi suite with this phone.
Anyway bluetooth connection is working fine. I can do all syncs with everything on bluetooth.
USB connection is not, when the phone is connected, and I select PC Suite on the phone, the phone and PC then get stuck in a sort of loop where the PC is "installing drivers" and the phone keeps asking me to select PC Suite mode. Occasionally I get an error message saying I am stuck in file transfer mode.
I have also tried this after going into settings and setting USB connection mode to PC SUITE only, with Don't Ask selected.
This is profoundly frustrating and also renders the ability to update phone software totally useless because you cannot update via bluetooth, only USB connection.
I am getting mighty peeved off with Nokia's ability to get firmware, and software products right. Come on guys, hire some decent developers, and/or start responding to feedback from customers like me. (I'd happily beta test any software, I've done it before for an online game......!!!!)
I am considering selling my N97 online, and just buying an unlocked HTC HD2 after over a decade of using Nokia phones.
help!
R

Amazing that so many have responded to this post, and not one has come close to the right answer... I've had the same problem for a while, and at first I thought it was just my old XP notebook - which had more than one problem - or the general poor performance we've come to expect from the N97. I couldn't even sync on Ovi. But with my new Windows 7 notebook in hand, I was all excited to finally update the firmware on my phone - which had been stuck on v12 for a while. Imagine my surprise when I still had the same problems with my brand-new notebook. I started browsing around for more help than this thread, and found that Nokia has released a software update program seperate from Ovi Suite. Just google "Nokia Software Updater for Windows 7" or whatever version of windows you have, download & install. You might need to kill three "Nokia..." processes in the Task Manager to let it run, because it seems Ovi suite has these processes starting up with Windows. (Amazing when they program applications to do that without your permission!) Why on earth would Ovi Suite need to run three processes on my machine anyway, if I haven't even started up the program after reboot? But still, this program wouldn't connect to my N97 via USB. I clicked on the icon in the system tray showing the drivers installing after I plugged it in, and found the culprit: The installation of the driver for "MTP USB Device" failed. Googled that, and found that there are a lot of people having problems with that, from cameras to cellphones to mp3 players. Tried a few suggestions I found, and ended up having to uninstall all my (brand new?) USB controllers (under "Device Manager") and deactivate Windows Media Player from "Windows Features", reboot, then re-activate Windows Media Player - something to do with MTP Devices getting their drivers from Windows Media Player. Not sure if it was one or both of these fixes, but then Nokia Software Updater connected to my N97 with no problem. Installed the software update, and now all is good again. Incidentally, after the software update was complete, a whole bunch of different drivers were installed when I connected the USB... the main one changed from "Nokia ... Parent ..." something to "Nokia... Flashing..." something - and Ovi Suite connects fine now as well! Good luck to everyone who had this problem - it's been fun.

N97 Music and Maps Problem ... All dissappearing

Hi
I have a major problem with the music on my n97...Before i left for overseas (I am gone for 3 months) i bought the n97 and added roughly 15 of music onto it to keep me occupied whilst walking and travelling. That equated to roughly 3500 songs. For some reason all but 440 arnt showing on the music player.
Yes i have refreshed the music files inside the music app and still nothing shows up.Just this 440 songs that were already there. Now since i am some 12,000km from home I am unable to simply reload my music back onto my phone. This music is all stored on the 32GB internal mem card and have still taken up space in there although when i explore the memory card i cant find this music anywhere. Is there anything i can do to get this sorted out? Has anyone else had this problem and can help me (without having to reload the music off my comp since i wont be able to get there until December)
Also,last night through the software update inside the phone i upgraded maps to version 3.1 After i did this i went into the ovi maps app and guess what,all my maps have dissappeared,I had all of Europe (which i desperately need),Singapore,Australia and NZ. Now they are all gone,same as the first part of this thread,can anyone help me with this prob too?
I really appreciate any help i can get especially on the music side since i sold my ipod to pay the N97...now i have lost most of my favourite music off it and really want it back
Thanks

All of your music and apps should be on your computer.
Did it not come from your computer in the first place?
If you bought it from the ipod, then it should transfer from the ipod to your computer when you sync or you can click File>Transfer Purchases
Did you sync to a different computer than normal?
Perhaps you could explain what happened?

OBIEE 11g 11.1.1.6.0 to upper version Patch install problem

Hi
when am trying install the patch for obiee11g 11.1.1.6.0 to upper version i facing this problem
OPatch Version : 11.1.0.9.0
OUI Version : 11.2.0.1.0
The OUI version is not applicable for current OPatch version.
OPatch failed with error code = 1
i saw this blog http://obieelive.blogspot.in/2012/07/obiee-111161-patch-from-111160-in.html
am not under stand what the purpose of Oracle_home is it related to DB or OBI Application?
what is purpose of ORACLE_HOME VARIABLE?
any one guide me for installation OBIEE11g to upper version and how to install the patchs step by step
Regards
Leela Krishna

995847 wrote:
Hi
when am trying install the patch for obiee11g 11.1.1.6.0 to upper version i facing this problem
OPatch Version : 11.1.0.9.0_
*> OUI Version : 11.2.0.1.0*
The OUI version is not applicable for current OPatch version.
OPatch failed with error code = 1
i saw this blog http://obieelive.blogspot.in/2012/07/obiee-111161-patch-from-111160-in.html
am not under stand what the purpose of Oracle_home is it related to DB or OBI Application?
what is purpose of ORACLE_HOME VARIABLE?
any one guide me for installation OBIEE11g to upper version and how to install the patchs step by step
Regards
Leela KrishnaOpatch should be higher than OUI version.. Your OPatch is outdated that's why you are receiving the above error
you need to download the latest OPatch by searching http://support.oracle.com for 'How To Download And Install The Latest OPatch Version [ID 274526.1]'
After which you can start with the Patching of OBIEE.
http://www.askjohnobiee.com/2012/10/how-to-apply-obiee-11g-bundle-patch-set.html
Please mark helpful/correct
Thanks,
RM

A different version of the problem loading raw images edited in LR 3.3 to CS4

I have recently upgraded LR2 to LR3 (now up to 3.3). I have CS4 extended and ACR 5.7. Haven't printed for some months now because I have moved overseas (UK to Malaysia) until yesterday. The printing was a disaster because the colours printed are not as the finished print files. So I have been investigating (calibrated my monitor etc) and then I noticed any LR3 edited Nikon raw file when edited in CS4 carrying across the LR3 settings was so bad and very different to the LR3 version. The nice vibrant LR3 image was dull with inaccurate and toned down colours as though a piece of grey glass had been put in front of it.
So I have read as many of the forum questions on the related issue and have not found an answer or more to the point a solution. I run a MacPro with the latest Snow Leopard OS but all of the fixes I have tried don't change the problem. Is it a compatability problem or an error by me due to some obscure setting or something else? Never had the problem with LR2 and the same Photoshop CS4 software.
I also lost most of my LR2 edit setting for a good percdentage of the edited files when I upgarded to LR3. Don't know if this is related or another problem as now I have to redo all of the files that have lost their edited changes.
I would appreciate any help in solving this/these issues.

The question posted by me has not been answered and I am pulling my hair out trying to have my Lightroom/CS4 image processing work flow that has worked for nearly 2years back to normal.
I might as well not have lightroom as opening a lightroom 3.3 edited image in CS4 removes all of the editing done in lightroom. This appears to be true since I upgraded to v 3.3. As one person who posted in another theme suggested I tried saving a Tiff of the lightroom changes which I did via Nik Efex (I do not know how to save a raw file as a Tiff in LR as I don't do it as part of my normal workflow) but it reverted to the totally unedited version of the raw file when it opened in CS4.
Is there a problem with LR3.3 that Adobe are keeping quiet on. There was no warning when I picked uop the 'updated software' message when I opened LR a short while back. Now I am unable to use either as the processing route I use in LR is very fast compared to CS4 (in my view) and I do not have the time to completely change my work flow. I could revert back to LR3.2 but that may lose all of my editing and cause me no end of problems.
As this is an Adobe forum I thought these problems would be discussed with a lot more answers.

PhotoShop CC - Version 14.2 - Problem with File Menu

After installation of PhotoShop CC version 14.2 when I bring up the File Menu and click on "Browse in Bridge" instead of launching Bridge it launches the Creative Cloud update/install application. Some where some parimeter file is messed up, my guess.
Anyone else seeing the same thing?

This is a stock answer, but you can hold down the Ctrl-Alt-Shift keys and start Photoshop. The reset preferences dialog will show up. You can reset Prefs and see if it fixes this.
The other is a bit more drastic,
Uninstall Photoshop CC
Run the CC Cleaner tool Download it from this help link, and carefully follow instructions.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Reinstall Photoshop.

N97 version 2.0 problems

Similar Messages

Maybe you are looking for