N97 - White keyboard issue - letters backlight glo...

Have you found any solution to his keypad backlight glowing in a lighting condition ? I mean the letter glow and become white and the background buttons are also white.. so you dont see any letter ...Readability is ZERO. The sensor dont understand that there is light an it switches on the blacklight.
I am having this problem in evening and indoors.. The keypad becomes all white ?
I know i had E90 and the keyboard backlight was manual control with a button to switc-hon the light or off. Can we adjust the light sensor of nokia. Is there any program to override this backlight sensor. Can we have a command / button to switch on or off this keyboard light. ?
Please help.

I do have exactly the same problem, now with my 2nd white N97. It is absolutely impossible to work on an airplane or at the train, even sometimes in the office. This phone is NOT a business phone - because you can't use the keyboard when you really need it. I demonstrated it too in the Nokia store and they said, they can't help.
And the Nokia support doesn't help at all. They really suggested that I should pay for a keyboard replacement with black keys, but this can't be done by a Nokia dealer; I would have to go to an independent dealer and I would lose my warranty.
This is the most unprofessional support. I think after all, this will be my last Nokia phone and I will be happy to sell the N97 when Apple launches an iPhone with keyboard. Nokia doesn't know how to make good business. I am an CEO of a german company and if we would treat our customers like Nokia does, we would make less than half of our business.

Similar Messages

White Keyboard issues

Hi
I have had problems with Apple's white keyboard. I believe it's still the latest one. Every 3-4 months of normal usage of my keyboard, the keys start sticking and I find it very hard to type. I have brought the keyboard back, and now this is my FOURTH new one. And now my keys are starting to play up again.
I believe it might be due to Hong Kong's really humid weather, very hot and air conditioned rooms. However there is still no excuse. I have the older G4 clear plastic with black keys keyboard. I have used that in my other room for many many years now and the keys feel so much better to type and I have not had the same problems with it. They feel it's made with better quality than the white keyboard.
The reason I bring this up (besides the frustration) is that I want to buy a wireless keyboard and mouse. But I worry if I have the same problem again, then I am in for some serious stressful experiences.
Btw, just typing the 2 paragraphs now, I have experienced the "s", "d" and "a" and "n" keys to just be stuck... so I had to go back and press them again.
Anyway, if there are really good ways of dealing with this, please share it with me. I think I have run out of warranty now to swap for my fifth keyboard.
Thanks

I actually am on the phone with tech support right now. I have an Applecare Protection Plan so they are sending me a replacement keyboard under warranty.
I also took mine to an apple store. They removed a couple of keys, blew some air in and replaced the keys. When I got home, it worked for about ten minutes and then the problem returned. Same area of the keyboard...left side a,s,d,w,q,z keys. It seems that if you do not press directly straight down on the keys, this happens. Manufacturing defect maybe. Sounds like you need a new keyboard too. I would make sure you get a late model one and keep your receipt though or go to an after market one if they exist (perhaps Logitech). I don't know if the wireless ones are made at the same factory or if they have the same problem. Once again, save the receipt... try it out.... and return it within the warranty period if it doesn't work.
Good luck.

Macbook White keyboard issue (potential software problem, please help!)

Hi there! Before I go into detail I have a Late 2008 Macbook White (Upgraded to 4GB RAM, 320GB HDD) so I would have had it two years this Christmas (2010)
Over the last few months, on odd occasions the bottom row of keys completely stop working (by bottom row of keys I mean: Z X C V B N M ? and then fn ctrl alt and CMD on the row below. The space bar and right CMD work perfectly as does every other key on the keyboard.
Now this is where it gets really weird. I always thought this was a hardware issue (Loose ribbon connection etc, I just don't have the hours in the day to sit down and take it apart) until my friend gave me his old aluminium apple wireless bluetooth keyboard (the laptop sized one). The bottom row of my keyboard broke again whilst visiting him so we set up this aluminium keyboard of mine.
After it connected I started typing on it and realised that the bottom row on the wireless keyboard wasn't working, however when I typed using the laptop keyboard it worked absolutely perfectly. Really nice and responsive (I'm even typing using it now with the Bluetooth keyboard connected!!)
So basically, without the wireless keyboard connected the bottom row doesn't work on my laptop. However when I connect the wireless keyboard the problem comes off the internal keyboard and onto the wireless one. This has ultimately led me to believe that it's a software fault and not a hardware fault as first thought. We tried the same wireless keyboard on my friends mac and there were no issues what so ever.
If anyone out there has absolutely any idea what the heck is going on then please reply to this and shed some light on my situation!
Thank you!

I have a 2008 Macbook and have the same problem. Have found two other people with the 2008 white Macbook with similar problem of bottom row of keys (only) not typing. Obviously an Apple glitch. Any suggestions how to fix without substituting other keys or attaching another external keyboard (Alternate Microsoft keyboard works fine with keyboard to USB port). Please email [email protected] if you know the solution.

When I first downloaded to 7.1, it made my keyboard black with white letters. Very distinct. Now, it's somehow back to white with black letters. How do I get my black keyboard with white letters back ? iPhone 5S

When I first downloaded to 7.1, it made my keyboard black with white letters. Very distinct. Now, it's somehow back to white with black letters. How do I get my black keyboard with white letters back ? iPhone 5S

You changed the proper preference, but you don't need to relaunch iTunes. You do, however, need to click the blue OK button at the bottom right of the preferences window. The change will happen then.

N97 (White unbranded) - Touch Screen Issues

Hi,
I had purchased N97 white from Nokia Flagship store few months back. From the last month or so i am seen my mobile's touch screen at times freezes and then on its own works after some time. This problem lasts for few seconds to few minutes and really make the phone dead like i can not receive the call using the touch screen or green button.
I have visted flagship store many times and booked it also but unfortunately nokia care people have been flashing the software and saying that it works. Unfortunately it does not look to be a software problem. I now have again booked it and have asked for the replacement.
Has anybody else faced the similar problem ? Does anyone know what's the likelihood of i getting the replacement and what's the turn around time from nokia.
Thanks.
Sandeep

i doubt that they will replace your device if it has been more then 30 days since you bought it. they might fix it for you by swapping some components if indeed this is a hardware issue. here in the US because i have to send out the phone to another state to get it fixed it may take several weeks to get the phone back. it all depends on where you live and if you have a care center by you.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

White keyboard has no touch responsiveness with reduced transparency is on

On iPads, if you turn reduce transparency on, the "dark" default keyboard works fine, but the "white" keyboard's keys no longer flash when

Same here, so you're not alone. I've been troubleshooting this exact issue for the last day or so. The issue affects both of my iPad mini 2's under iOS 8.1.1 but NOT the iPad 3 which I recently update from iOS 6.1.3 to 8.1.1. My iPad 4 is still under iOS 7.1.2 so I cannot test that device as I'm not ready to update it yet.
I can confirm that the issue is that the white keyboard will not darken the keys as they are tapped if "Reduce Transparency " is enabled. The issue is most easily seen when using the Notes app keyboard and is 100% reproducible on both of my iPad mini 2's. If "Reduce Transparency" is disabled, the keys darken as the keys are tapped, just as it should.
At first I thought I had an errant setting somewhere, contained in my backup but that's not the case. Restoring the iPad mini 2's as new (NOT from a backup) does NOT correct the issue. Freshly restored as new with NO settings changed at all except for the "Reduce Transparency" setting still causes the issue. I even re-downloaded the iOS 8.1.1 update freshly today (I had the .ipsw restore file from first release) and restore as new with the new update but to no avail.
I believe this to be a legitimate bug with iOS 8.1.1 and certain devices within the same device family since my iPad three does not have the issue. Different devices pretty much have their own iOS version which may be the reason that some device have the bug while other do not.
I would say don't bother with restoring as new since in my testing, it does not resolve the issue...at least in my case and on two different devices in the device family.
@Demo: what device are you using? Your signature states "iPad 3"...

T420 Keyboard issues

I have a T420s and have keyboard issues.
G and H keys are not working at all. also when you press 2 keys together you get a beep and a delayed output of the letters you pressed.
also if you hold a key eg 'y' then press eg 't' nothing happens except a 'beep'
please help as I am a reseller and have to deliver this tomorrow morning.
lenovo tech support wont talk to me without paying till monday morning
ash

http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014954
use the above software to do a test on the keyboard to determine whether it is hardware or software issue.
Unfortunately the support line is open only between 8 to 5 weekday, there is no afterhour or weekend support.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Russian mnemonic keyboard three letters missing: щ ч э - in Office 2013 in Windows 8 Pro or Standard and Windows 7 Pro or Standard

The issue I believed is Windows specific. It only appears to work correctly on a Windows XP system. I can get the keys to work on Windows 7 or Windows 8 system.
Russian mnemonic keyboard three letters missing: щ ч э
I have a client that noticed this issue. He is a linguist and he uses the letters quite frequently. He further explained that...
Russian mnemonic keyboard three letters missing: щ ч э
On Windows 8 there is a mnemonic Russian keyboard.
Unfortunately there are three letters which I can not find: щ, ч and э.
These three letters exist in the standard Russian keyboard. They are at the following location (in the US keyboard): o,x and '.
I also did a test on a Windows 7 machine running office 2013 and still the letters are missing as described.
The client explained without these three letters the mnemonic keyboard is useless
Your help to address this issue is greatly appreciated.
Nelson Ehis
Nelson Ehis

I think it is by design. You can use Preview to show the keyboard layout.
Niki Han
TechNet Community Support

Keyboard misses letters when typing

When I am typing on my keyboard that came with my computer, it misses letters. I type on several other keyboards and they all work fine so I don't think it is my touch. Had this for 3 months now and Best Buy refuses to take care of the problem for me. Can anybody help me?

Hello @BCTVK,
I understand that you are having issues with your touch keyboard missing letters when typing on your HP ENVY 23. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

N97 White Screen .. Phone wont boot at all ... Stu...

Hello all,
So I have finally stumbled upon the White Screen of Death ... Really sad that it happened but I still have hope that it may work. THe phone does not boot up and its stuck on the Nokia logo
[Long read]
It happened one before a day and I managed to find a helpful topic
/discussions/board/message?board.id=smartphones&thread.id=141381
It had everything regarding reset codes and whatnot, but the really helpful message was from grschinon .. ( he seems to know what hes doing ) .. for he shared an amazing technique of holding the green and red buttons while booting up the phone, and it worked !!
But yesterday, it happened again .. The screen wont light up and the keylock was stuck, so I just removed the battery ... I turned it on while assuming that the red/green button technique will work, but it didnt
I tried it over and over again ( been trying for half a day actually ) .. but with no avail, it didnt work ..
I tried connecting it through usb, with the wall charger, different combinations of buttons ... meh none worked
Its really annoying that half of my friends keep saying, THIS is why you get a blackberry .. and similar stuff .. My previous phones are all Nokia and this is just a huge dissapointment .. the N95 is 500000 times better than the N97 in stability and etc ... I was anxiously waiting for v2.0 ... now my n97 is dead
[/Long read]
I understand that there is a solution that will FORMAT the whole phone, but I dont want that, there are lots of pictures on my internal memorycard (32gb one) and 30+ applications (if not more) .. I seriously dont want to lose all of those ..
So do you know any other way that I can fix the problem ?? Is there a soft reset combination that i can use rather than the hard reset one??
Please advise, your comments are really appreciated,
Kind Regards,
Z
Message Edited by ZaZu90 on 10-Oct-2009 12:08 PM

These are the solutions that i've colected over the internet:
I hope it help's you!
N97 White Screen .. Phone wont boot at all ... Stuck at Nokia logo
They instructed me to turn on the phone pressing the green, red and camera button at the same time as I pressed the power button.
It worked and the phone started.
I didn't need to format my phone.
Had the same problem with my White N97 (not that the colour probably makes a difference).
Was using the Facebook App on the main screen as a widget, tried to start it up by touching it - it seemed to not start even after waiting or trying multiple times.
So i thought to myself, "I'll just reboot my phone, that should fix it."
BAD IDEA.
Got stuck on the White Screen with the Blue "NOKIA" on it, so i thought...i'll wait and see what happens.
Nothing...for hours.
So i pulled the battery and put it back in again....powered on....same thing..."NOKIA"...and nothing else.
Repeated this about....10 times, getting more and more nervous that i had turned my $950AU phone that i had boasted to my friends that is better than their iphones....into a useless brick.
So, i turned to Google looking for answers...
Someone said they left the battery out of the phone until it went flat and had some success.
I found something about other users having a similar issue with other software (Garmin GPS software), and also the "Mail for Exchange" application.
They mentioned something about the only way to get it working again was to hard reset the phone to stop the apps from going online...
I REALLY didnt want to do a hard reset, as i had a bunch of apps and data that i DID NOT want to lose or spend like 3-4hours re-installing.
SO...I got thinking...how can i stop my apps from trying to go online without a hard reset.
So this is what i tried - and it worked!
1- Power off phone (if power button responds)
2- Pull out battery.
3- Remove memory card (if you have one)
4- Remove SIM card.
5- To make sure phone has no residule power hold down power button without any of the above inserted.
6- Re-insert battery only (without SIM card or Memory Card)
7- Cross your fingers and toes. (optional...but if it helps what the hell.)
8- Power on phone.
9- IF the phone prompts you to go online in any way Select NO. (or if it says do you want to activate Offline mode say YES)
10- Press Options key when you get to the home screen and select "Content to offline mode"
11- Make sure "Offline" is displayed in top left corner near where the signal bar usually is. ( if it doesnt say "Offline" press the power button briefly, and select "Offline" (should be underneath the "Pager" profile)
12- Once you have made sure your phone and applications are in offline mode - Power off phone using Power button.
13- Remove battery
14- Again to make sure phone has no residule power hold down power button without any battery or cards inserted.
15- Re-Insert SIM card, Memory card and Battery.
16- Power on Phone.
At this point the phone should start up as per normal, I knew it was working straight away for me because my SIM card prompted me for a pin number. (which happens normally for me when I turn on my phone)
After the phone is ready, i just put my phone back into online mode by selecting my "general" profile, and put my content back online.
Please note: This is what worked for me. Results and Mileage may vary.
It seems the issue is that the phone startup is being held up or stopped due to Programs or Applications tring to go online.
For me I suspect it could have been the Facebook App due to the problems i had before powering off my phone the first time.
I am going to put my Content to offline mode if I need to reboot my phone again, at least until nokia pull up their socks and release a fix for this.
Side note: my N97 is also running Version 11 Firmware. ( not that it may make a difference)
Good luck to all with same problem, hope this works for you too.
Had the same problem but I just removed the extra memorycard and formatted it on my computer before I put it back...
after a few days trying without micro sd inserted
the result is, n97 still stuck in white screen nokia logo
it happend always if i turn off my phone without sign off the facebook app widggetz..
here is how to crash your phone
put facebook widgetz on nokia standby screeen
and then put it online mode
klik the facebook app
just do anything in your facebook for check it already connected
klik end key
now turn off your phone without sign out the Facebook
turn on again
and boom your phone will stuck on nokia white screen logo
and it will never boot forever..
sometime when you take off the batery and reinserted again it can boot normaly but the percentage is 20% only..
soo if your n97 can boot normaly after FB "accident" that mean you lucky and i sugest you unistall your FB ASAP before n97 stuck again on white screen nokia logo..
is anyone have problem like mee??
i like to hear another opinion...
i think nokia already knew this problem, that way when you check ovi and your phone set to nokia n97 the facebook app is missing...
my firmware is v11 already

Help with keyboard issue - some works, some doesn't. :(

Hi all - I hope someone can help me out. I have a iBook G4 that had worked like perfection up until yesterday, that's when my keyboard issue started.
Here's the issue:
The top row (function keys, num lock, volume, display) works just fine, the cap button light is stuck on - cannot be changed, and nothing else on the keyboard functions.
Here's what I've tried:
1) tried a restart - no changed
2) shut down and removed, checked, and then reinstalled the battery - no change
3) popped out keyboard to check underneath for debris, etc and then replaced back - no change
4) tried pressing down on each key to see if one was stuck - no change
5) tried to see if resetting my PMU would help (not sure if it actually took since I have to use the keyboard buttons + the power button), in any case it shut down, when I restarted still no change
6) called Apple tech - they put me in DOS (so apparently my "s" and apple key work) - however at the first prompt area my keyboard automatically began typing FFFFFFFF over and over again until the DOS command area was full, to which my iBook just sent me back into my op system/desktop.
This leads me to think something is just up with my cap and f key, however still no change in the situation.
7) going to the Apple store tomorrow.....
So has anyone encountered this? Is this something I can fix for free? My APP has expired by just 2 months and I am hoping I can avoid forking out money for this.
Any help would be greatly appreciated. Thanks in advance.

Well, sorry about the delay in reading or replying to your post about this
keyboard issue; if you had an external standard Apple USB keyboard
(the white kind) on hand, that would've been good to see if the issue
was possibly just the computer's built-in keyboard. That also would've
given you the opportunity to choose keyboard commands to try and
work around that issue, if (by chance) the iBook's keyboard wasn't bad.
Single-user mode, or terminal/console, can give you access to the
system behind the graphic user interface of the OS X; or BSD unix.
That may look like DOS, but it isn't anyone's quick n dirty OS...!
Hopefully you were able to resolve the issue in a satisfactory manner
after traveling to the Store. What were they able to say or do about it?
Good luck & happy computing!

Can't login to mac - keyboard issue?

Hi
I'm hoping someone can help me with this...I can't get an appointment at an apple store until a week away.
When I go to login into my MacBook I start typing my password DVD the keyboard seems to start entering letters of its own. Plus when I am able to type my password in and press enter the computer won't recognise it (capslock is off). It also makes a continuous beeping/drumming noise when I go to switch it on. I have no idea where to start with this...could it be a keyboard issue? Or a virus? Also I have FileVault enabled as well.
Would appreciate any advice!
Thank you

This is probably a hardware problem. Clattering noises are usually either a bad CD or DVD or a bad optical drive, or possibly a disk drive or fan hardware problem, or some other hardware confusion.
Something other than the usual startup chime can indicate the hardware tests have found an error.
Make sure you have no CD or DVD inserted into the drive.
Remove all external devices — USB hubs, storage, keyboards, or otherwise — and test again.
Can you boot the MacBook using the recovery partition or boot into safe mode?
I'd also try an external keyboard, if you have one available.
I'd normally suggest using target disk mode as a way to try and get a current backup of your disk data, but AFAIK your particular MacBook model lacks both FireWire and Thunderbolt ports, which means that's not (again, AFAIK) an available option here.

N97 White Screen / Bricked Thread

Hi there,
I'd like to start a thread for users to centrally collaberate information about the seemingly increasingly common problem with the Nokia N97 and its proper bricking problem (and by bricking, I mean the bios not booting into the firmware, a'la white screen).
My main reason for starting this thread is because there doesn't seem to be much information out there regarding this issue and it may leave a lot of people experiencing this problem in the lurch, which is not fair, really - it's an incredibly expensive phone.
I'm also quite an articulate fellow in terms of technology, I run a web hosting business and do significant amounts of software development, so I hope I can help the more technically-minded Nokia experts on this forum understand what the less experienced people are having to deal with because a lot of people of have problems like this don't know how to explain what happened exactly in detail and it is indeed the detail that matters when trying to receive help from seasoned experts with certain niché products. So, having gotten that out of the way, here's how it all started...
I'll begin by saying that my problem began with using the NSU. The phone was plugged in via USB, fully charged and NSU detected new firmware and began downloading it, once it had downloaded, it began to install it - about 20 seconds later it reported it had finished installing which already got me curious as I'm sure it took a hell of a lot longer on my older N95 phone. Immediately curious that it may have bricked the phone, I was tempted to pull the USB cable, but I left it there for a short while to see if NSU did anything else (even though now it seems futile, because it was on the finished page as though it had completed the installation) and consequently, it did not do anything further. I pulled the cable out and powered on the phone and thus I was greeted by the white screen of death. I was very gutted, needless to say, I had only had in less than an hour (had problems with the Facebook widget immediately, so I went straight to the NSU).
What happens to the phone now exactly? Well, as it stands, when I power it on, the vibrator notification that tells you it has powered on functions perfectly well and it's obvious that it tries to boot, but it just outputs a white display and then turns off. Sometimes it turns off in such a fashion that it's almost like you took the battery out, i.e. you can still see some charged pixels on the screen which have not yet faded away.
I took it to a Nokia Authorised Care Point (or whatever they're called exactly) and he reported that it would need to be sent off to a high level repair centre (I imagine for the firmware to be loaded back onto the device by JTAG or similar). At time of writing, it's been left for repair for 7 business days; the store told me that it would take approximately 7 to 10 business days, so we're still looking good and I'm hoping to receive a call shortly to say it has been repaired and is ready to collect.
I'm hoping for the best, but I've read a few nightmare stories on these forums, so I'm prepared for the worst and I will be exploring every possible option. Any contributions pertaining to this issue are welcome, however please do not post "I have this problem too" or "I have a similar problem" without specifically having the white screen issue and without providing any additional details that I haven't already covered in this post, keep things relevant. Thanks.

Hi there,
I'd like to start a thread for users to centrally collaberate information about the seemingly increasingly common problem with the Nokia N97 and its proper bricking problem (and by bricking, I mean the bios not booting into the firmware, a'la white screen).
My main reason for starting this thread is because there doesn't seem to be much information out there regarding this issue and it may leave a lot of people experiencing this problem in the lurch, which is not fair, really - it's an incredibly expensive phone.
I'm also quite an articulate fellow in terms of technology, I run a web hosting business and do significant amounts of software development, so I hope I can help the more technically-minded Nokia experts on this forum understand what the less experienced people are having to deal with because a lot of people of have problems like this don't know how to explain what happened exactly in detail and it is indeed the detail that matters when trying to receive help from seasoned experts with certain niché products. So, having gotten that out of the way, here's how it all started...
I'll begin by saying that my problem began with using the NSU. The phone was plugged in via USB, fully charged and NSU detected new firmware and began downloading it, once it had downloaded, it began to install it - about 20 seconds later it reported it had finished installing which already got me curious as I'm sure it took a hell of a lot longer on my older N95 phone. Immediately curious that it may have bricked the phone, I was tempted to pull the USB cable, but I left it there for a short while to see if NSU did anything else (even though now it seems futile, because it was on the finished page as though it had completed the installation) and consequently, it did not do anything further. I pulled the cable out and powered on the phone and thus I was greeted by the white screen of death. I was very gutted, needless to say, I had only had in less than an hour (had problems with the Facebook widget immediately, so I went straight to the NSU).
What happens to the phone now exactly? Well, as it stands, when I power it on, the vibrator notification that tells you it has powered on functions perfectly well and it's obvious that it tries to boot, but it just outputs a white display and then turns off. Sometimes it turns off in such a fashion that it's almost like you took the battery out, i.e. you can still see some charged pixels on the screen which have not yet faded away.
I took it to a Nokia Authorised Care Point (or whatever they're called exactly) and he reported that it would need to be sent off to a high level repair centre (I imagine for the firmware to be loaded back onto the device by JTAG or similar). At time of writing, it's been left for repair for 7 business days; the store told me that it would take approximately 7 to 10 business days, so we're still looking good and I'm hoping to receive a call shortly to say it has been repaired and is ready to collect.
I'm hoping for the best, but I've read a few nightmare stories on these forums, so I'm prepared for the worst and I will be exploring every possible option. Any contributions pertaining to this issue are welcome, however please do not post "I have this problem too" or "I have a similar problem" without specifically having the white screen issue and without providing any additional details that I haven't already covered in this post, keep things relevant. Thanks.

Hp envy 14. Keyboard issues.

hey all,
ive been having an issue with my hp envy 14, with windows 7. This forum seemed the most relevent, as its a keyboard issue.
So whenever I turn my laptop on the keyboard is non-functional, so I turn it on with alt f5 I believe, this gets the key board functional, I can at this point type in my user password. Next as I type in my password, the capslock button has reversed itself, so when my keyboard shows caps on, caps is off and vice versa. Also, sometimes when im using my computer, it switches between recognizing caps is on or not.
I recently wiped the laptop, so I believe the issue to be internal.
This is frustrating to put it lightly, any help appreciated.

Hi @czrom
Welcome to the HP Support Forums!
I understand that you are having trouble with your keyboard. I am happy to help. Please post the full product number abd operating system so I can find the correct support pages and drivers for you. Since you mentioned that you just wiped the machine it is likely that some of the drivers are missing.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

MacBook Pro 13-inch Mid 2010 using Mac OS X 10.8 Keyboard Issues.

Good day ASC,
I have a MacBook Pro 13-inch Mid 2010 upgraded to Mac OS X 10.8. It now has keyboard issues. Keys F4, 4, r, f, v, caps lock, space bar, and directional keys left and down do not work. I've been looking into the problem thinking it could be a software issue. Can anyone help?

Welcome to Apple Support Communities
You need to install the Windows support software in Windows to make it run properly. You have to download and install these drivers in Windows > http://support.apple.com/kb/DL1630?viewlocale=en_US&locale=en_US
After installing them, I recommend you to look for a newer GPU driver

N97 - White keyboard issue - letters backlight glo...

Similar Messages

Maybe you are looking for