N9800GT-T2D512-OCv2 (Need Help)

Hi there i just recieved my swop out of my 9800GT 512mb plugged in it decided to play some games while playing music and a game at the same time about say 5mins into the game my game starts to jerk i checked my gfx temps it says 39 degrees so i doubt its that played the game without any music playing still jerks im tried using driver version 182.08 and 182.06
can anybody help me out please
Specs:
Mainboard: Asus P5Q-E (BIOS) Latest
CPU: Q9300 (Not Overclocked)
Ram: OCZ DDR2 800mhz 2x2GB
Soundcard: Onboard (Plan to buy Asus Xonar DX)
GFX: MSI 9800GT 512MB OC
PSU: Zalman 750watt PSU
HDDS: 3x 250gigs Seagate
OS: Windows Vista

Quote from: Ravi on 22-March-09, 06:05:00
I have done that still the same
Quote from: Ravi on 22-March-09, 17:33:17
Hi Stu ive just tried my bros Leadtek 9800GT 512MB in my pc and played a game and it works fine no jerks i think i should rma this card
Yep, looks like you've got another bad one. Real case of bad luck there I'm afraid!

Similar Messages

N9800GT-T2D512-OCv2 no video signal

Dell 8400, 3.6ghz P4, 1GB, PCIE
My old card is a Geforce 6800GT, and I have the lastest drivers installed for that. It works fine.
When I install the new 9800GT, there is no video signal (black screen). The system post is fine (all 4 lights on).
I have a vga plug&play monitor so I am using the supplied digital to vga adaptor. I have tried both card outputs and there is no signal on either one.
I can't install the new drivers without a working display.
Is the card bad or is there some compatibility issue?
If my HW is somehow not compatible, is there some utility I could use to check?

You are not understanding me. Get GPUz and tell me what speed you PCIe lane is running. Even at 8x when the 3D demands are high, such as folding@home or Crisis or some really intensive game set at the highest settings you can, the GPU is likely going to need the same power in a PCIe 8x slot as PCIe16x slot. If the fastest PCIe slot you have is 4x, you've waisted your money. I missed that you were using a Dell--often Dell PSUs are underrated(they can deliver more than what's printed, although this tendancy shouldn't be relied upon). You may be stressing the PSU to it's limits which will shorten it's lifespan--your choice.

N9800GT-T2D512-OC Bios

I have a problem with my N9800GT-T2D512-OC
When I start the PC up the screen has heeps of dots all over it and when windows starts it crashs and reboots.
I want to flash the bios and see if that help but I can't download it from the site.
Were can I get the BIOS for it ?

Quote
When I start the PC up the screen has heeps of dots all over it and when windows starts it crashs and reboots.
Now tell us a bit more. When did this start to happen. Is it a new card, did you change something on the system prior, did you install new drivers?

Need help to develop Pythagoras theorem-

Hi i need help to develop proofs 2,3,4
of pythagoras theorems in java as demonstrations
These are applets can anyone help me with it or give me an idea of how to go about developing it -
the site is the following
http://www.uni-koeln.de/ew-fak/Mathe/Projekte/VisuPro/pythagoras/pythagoras.html
then double click on the screen to make it start

Pardon my ASCII art, but I've always liked the following, simple, geometric proof:
     a                   b
---------------------------------------+
|       |                                |
a|   I   |              II                |
|       |                                |
---------------------------------------+
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
b| IV   |              III               |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
---------------------------------------+It almost goes without saying that I+II+III+IV == (a+b)^2, and II == IV == a*b,
I == a*a and III == b*b, showing that (a+b)^2 == a^2+a*b+a*b+b^2.
I hope the following sketch makes sense, stand back, ASCII art alert again:     a                   b
---------------------------------------+
|               .             VI         |
|     .                 .                |a
| V                               .      |
|                                        +
|                                        |
|   .                                    |
b|                                     . |
|                                        |
|                  IX                    |
| .                                      |
|                                    .   |b
|                                        |
+                                        |
|      .                                 |
a|               .                  . VII |
| VIII                   .              |
---------------------------------------+
                 a                    bThe total area equals (a+b)^2 again and equals the sum of the smaller areas:
(a+b)^2 == V+VI+VII+VIII+IX. Let area IX be c^2 for whatever c may be.
V+VII == VI+VIII == a*b, so a^2+b^2+2*ab= c^2+2*a*b; IOW a^2+b^2 == c^2
Given this fundamental result, the others can easily be derived from this one,
or did I answer a question you didn't ask?
kind regards,
Jos

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

Need help to open audios attached in a PDF file

Hello
I just need help. I have ordered a reviewer online that has audios and texts in a pdf file. I was told to download the latest adobe reader on my computer. I have done the same thing on my ipad mini. I am not so technical with regards to these things. Therefore I need help. I can access the audios on my computer but not on my ipad.
I want to listen to audios with scripts or texts on them so i can listen to them when i am on the go. I was also informed that these files should work in any device. How come the audios doesnt work on my ipad.
Please help me on what to do.
Thanks

Audio and video are not currently support on Adobe Reader. :-<
You need to buy a PDF reader that supports them. My suggestion is PDF Expert from Readdle ($US 9.99)

Need help to open and look for file by name

Hi,
Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
How can i look for the file by his name ?
Thx =)

Hi ,
Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
The user ll type the serial that he wants delete ...
I already figured out what i need guys .. thx for the help ^^
I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
Thx ^^

I need help, my ipod touch is not recognized by windows as a harddisk

i need help, my ipod touch is not recognized by windows like a memory card or a harddisk.
i would like to transfer the files from pc to my ipod touch without useing itunes.
as i see theres some people here that theires ipod touch are recongnzed as a digitl camra, mine is reconzied as nothing, some help plz.
Message was edited by: B0Om

B0Om wrote:
ok but i still dont understed, only my itnes recongnize my ipod, when i go to " my cumputer, it dosent show up there, not even as a digital camra
Your Touch is working correctly. Currently, without unsupported third party hacks, the Touch has NO disc mode. It will only show up in iTunes.
how do i put programes and games in my ipod touch
Right now, you don't. The SDK is scheduled to be released in Feburary. Then developers will be able to write programs that will be loadable.

Weird error message need help..

SO.. i havent updated my itunes in a while because i keep getting this weird message.. it comes up when im almost done installing the newest/newer versions of itunes. it says
"the feature you are trying to use is on a network resource that is unavailable" "click ok to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"
now when ever i choose a file from the browse box it replies with this message "the file 'xxx' is not a valid installation package for the product iTunes. try to find the installation package iTunes.msi in a folder from which you can install iTunes."
no idea need help thanks
~~~lake
Message was edited by: DarkxFlamexCaster
Message was edited by: DarkxFlamexCaster

+it comes up when im almost done installing the newest/newer versions of itunes. it says+ +"the feature you are trying to use is on a network resource that is unavailable" "click ok to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"+
With that one, let's try the following procedure.
First, head into your Add/Remove programs and uninstall your QuickTime. If it goes, good. If it doesn't, we'll just attend to it when we attend to iTunes.
Next, download and install the Windows Installer CleanUp utility:
Description of the Windows Installer CleanUp Utility
Now launch Windows Installer CleanUp ("Start > All Programs > Windows Install Clean Up"), find any iTunes and/or QuickTime entries in the list of programs in CleanUp, select those entries, and click “remove”.
Next, we'll manually remove any leftover iTunes or QuickTime program files:
(1) Open Local Disk (C:) in Computer or whichever disk programs are installed on.
(2) Open the Program Files folder.
(3) Right-click the iTunes folder and select Delete and choose Yes when asked to confirm the deletion.
(4) Right-click the QuickTime folder and select Delete and choose Yes when asked to confirm the deletion. (Note: This folder may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(5) Delete the QuickTime and QuicktimeVR files located in the C:\Windows\system32\ folder. Click Continue if Windows needs confirmation or permission to continue. (Note: These files may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(6) Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.
(7) Restart your computer.
Now try another iTunes install. Does it go through properly now?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Need help adobe bridge cc output module

I need help. I have an assignment I'm held up on completing because the adobe cc bridge does not have the output modue I need. I followed the adobe instructions page to the letter. I copied and pasted the output module folder to the adobe bridge cc extensions folder in programs/commonfiles/adobe. The only thing is the instructions then say to paste the workspace file into the workspace folder located below the bridge extensions folder. I don't have a workspaces folder there or anywhere. I even tried must making one and adding the file to it, but no go. can someone PLEASE help me with this? I have an assignment due like now that requires the use of the output modue.thanks!

oh,my system is windows 8.1. sorry, lol.

Trying to create a Invoice based on Order need help Error -5002

the dreaded -5002 error is haunting me too! and I could not find a matching solution for this in the forum....
I need help quickly on this. I am trying to create invoices for some orders so the Base - Target relationship is retained. The orders I pick are all Open (DocStatus   = O and the lines are all Open LineStatus = O)
here is my code
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'adding Line
oInvoice.Lines.Add
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
    gObjCompany.GetLastError lErrCode, sErrMsg
    MsgBox (lErrCode & " " & sErrMsg)
End If

Indika,
Only set your base types...
(not items & description)
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line (to fill the second item line)
' the 1st line item is there by default
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'DO NOT Add THIS line
' (only if you want to add a 3rd line item)
'''oInvoice.Lines.Add -> Don't add this
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
    gObjCompany.GetLastError lErrCode, sErrMsg
    MsgBox (lErrCode & " " & sErrMsg)
End If
remember to add :
oInvoice.CardCode = "your BP"
oInvoice.DocDueDate = Now
oInvoiceDoc.CardCode = txtDOCBPCode.Text

Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen

Stored DB Procedure - Need help

Hi. I have a stored database package containing 2 functions. I need help with the function named ret_columns.
If you look at the code below you will see this function has two different FOR loops. The Select statement in FOR loop that is commented out works just fine, but when I try to use the uncommented select statement in it's place the Function returns NULL (or no records). However, if I run the Select statement in plain old SQL Plus it returns the rows I need. I don't get it.
Can anyone help me? I'm really stuck on this one.
-- PACKAGE BODY
CREATE OR REPLACE package body audit_table_info
as
function ret_tables return table_type is
t_t table_type;
i integer;
begin
i := 1;
for rec in (select distinct table_name
from all_triggers
               where substr(trigger_name,1,9) = upper('tr_audit#')) loop
t_t(i).tableA := rec.table_name;
i := i+1;
end loop;
return t_t;
end;
function ret_columns return column_type is
c_t column_type;
i integer;
begin
i := 1;
-- for rec in (select distinct table_name column_name
-- from all_triggers
--               where substr(trigger_name,1,9) = upper('tr_audit#')) loop
for rec in (select distinct b.column_name column_name
from all_triggers a, all_tab_columns b
               where a.table_owner = b.owner
                    and a.table_name = b.table_name
                         and substr(a.trigger_name,1,9) = upper('tr_audit#') and rownum < 5) loop
c_t(i).tableB := rec.column_name;
i := i+1;
end loop;
return c_t;
end;
end audit_table_info;
-- PACKAGE DEFINITION
CREATE OR REPLACE package Audit_Table_Info as
type table_rec is record( tableA all_tab_columns.TABLE_NAME%type);
type table_type is table of table_rec index by binary_integer;
function ret_tables return table_type;
type column_rec is record( tableB all_tables.TABLE_NAME%type);
type column_type is table of column_rec index by binary_integer;
function ret_columns return column_type;
end Audit_Table_Info;
/

It works when I do this!!! I'm so confused.
Ok...so I did this:
1 create table test_columns as
2 (select b.column_name
3 from all_triggers a,
4 all_tab_columns b
5 where a.table_owner = b.owner
6 and a.table_name = b.table_name
7 and substr(a.trigger_name,1,9) = upper('tr_audit#')
8* and rownum < 5)
SQL> /
Table created.
Then altered the Function so the Select statement refers to this table:
function ret_columns return column_type is
c_t column_type;
i integer;
begin
i := 1;
for rec in (select distinct column_name
from test_columns) loop
c_t(i).tableB := rec.column_name;
i := i+1;
end loop;
return c_t;
end;
Again, any help would be greatly greatly appreciated!

Need help with Math related operations...

I'm learning JAVA for more than 3 weeks and I really need help...
I'm using SDK1.4 with Elixir IDE Lite (+patch installed).
In the following screenshot <http://www.geocities.com/jonny_fyy/pics/java1.png>, I've got this error (when I right-click -> Compile) . Do you know what it means & how can I solve it?
Here's how it should look if correct (pic scan from lab worksheet)... <http://www.geocities.com/jonny_fyy/pics/lab.jpg>
Here's my java file... <http://www.geocities.com/jonny_fyy/FahToCeltxt.java>
Thanks for helping :>

Hi jonny
One step ahead:
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
public class FahToCeltxt extends Applet implements ActionListener {
     TextField msgField ;
     String msg = null;
     int msgValue;
     Label title;
     Button b;
     public void init() {
          title = new Label("Enter degrees in Fahrenheit: ");
          add(title);
          msgField = new TextField (10);
          add(msgField);
//          msgField.addTextListener(this);
          b = new Button("Convert");
          b.addActionListener(this);
          add(b);
//     public void textValueChanged(TextEvent event) {
//          msgValue = Integer.parseInt(msgField.getText());
//          repaint();
     public void paint (Graphics g) {
          int result = (msgValue - 32) * 5/9 ;
          g.drawString("Degree Centigrade is " + result , 50, 50);
public void actionPerformed(ActionEvent e) {
          msgValue = Integer.parseInt(msgField.getText());
          repaint();
}Regards.

N9800GT-T2D512-OCv2 (Need Help)

Similar Messages

Maybe you are looking for