Na Fatal error is PCI1200 in MAX zichtbaar , error on selected base adress

De debug exe is na fatal error niet te verwijderen, als er opnieuw
wordt aangelogd wel.
De PCI1200 wordt door MAX wel herkend, maar als het testpaneel
opgestart wordt, komt er een error : error on selected base adress.
Eerst moet de kaart worden verwijderd, de PC opnieuw zonder kaart
worden opgestart, afgesloten dan de kaart weer geinstalleerd en
opgestart voor de kaart weer goed functioneerd.
LW versie 6.0
NIDAQ versie 6.9.1f28

Bij een fatal error wordt de applicatie abrupt beëindigt en hierdoor worden er geen clean-up routines aan geroepen. als resultaat wordt is het Windows nog in veronderstelling dat de file in gebruik is en voorkomt het verwijderen hiervan.
Het zelfde gebeurt met de kaart deze lijkt voor Windows nog steeds in gebruikt zijn. Om dit op te lossen zou in het ergste geval de PC uitgeschakeld moeten worden en opnieuw ingeschakeld (geen restart).
Karsten
Applications Engineer
National Instruments

Similar Messages

[Solved] Error upon selecting "base" package during install process

Hey guys,
I got stuck in the install process. the following issue never occured to be before.
Upon selecting the base package during install and pressing "OK", i recieve the following error:
ERROR: check_is_in needs a non-empty needle as $1 and a haystack as $2!(gote: check_is_in '' 'base')
and that throws me out of the installation process.
A google search on the error message only returned sites where the responsible script is postet.
I am installing arch linux on a lenovo x220, on a seperate ext4 partition.
Any help is appreciated, thanks!
Last edited by replax (2012-11-06 20:30:55)

ArielVoynes wrote:The problem is with mirrors.kernel.org (now that I remember, I've read about kernel.org having trouble with their servers, is this still true?). Just choosing another mirror solves the problem.
I just read through this post and it did fix my issue. However, I do not remember what mirror I selected.
It was a few selections below kernel.org......
Last edited by BradJ (2011-09-20 04:27:17)

RW-50010: Error, RC-50004: Fatal: Error occurred in App and exit_code=139

I am installing R12 on Oracle Enterprise Linux and gettiing above errors.
++++++++ Platform++++++
(I) OS: OEL 4 64-bit update 7 ( installed from DVD if that matters)
[root@arun2 vmware]# uname -a
Linux arun2.devar.com 2.6.9-78.0.0.0.1.ELsmp #1 SMP Fri Jul 25 16:04:35 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
[root@arun2 vmware]# more /etc/redhat-release
Enterprise Linux Enterprise Linux AS release 4 (October Update 7)
(II) Apps: R12 64-bit (latest available on web released on Jan 13, 2009)
[root@arun2 rapidwiz]# ./RapidWizVersion
Oracle Applications Rapid Install Wizard
Version 12.0.4.6
(c) Copyright 2000-2006 Oracle Corporation. All rights reserved.
(III)H/W: Dell(insiron 530) Intel quad core with 6GB RAM 1TB disk
+++++++ rapidwiz+++++
1) Downloaded x86-64bit ebusiness suit from oracle site
2) unzipped all packages
3) installed recommend Linux rpms
[root@arun2 vmware]# more /tmp/orarpm.2.sh
rpm -Uvh binutils-2.15.92.0.2-25.x86_64.rpm
rpm -Uvh compat-db-4.1.25-9.i386.rpm
rpm -Uvh compat-db-4.1.25-9.x86_64.rpm
rpm -Uvh control-center-2.8.0-12.rhel4.5.x86_64.rpm
rpm -Uvh gcc-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh gcc-c++-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh glibc-2.3.4-2.41.i686.rpm
rpm -Uvh glibc-2.3.4-2.41.x86_64.rpm
rpm -Uvh glibc-devel-2.3.4-2.41.i386.rpm
rpm -Uvh glibc-devel-2.3.4-2.41.x86_64.rpm
rpm -Uvh glibc-common-2.3.4-2.41.x86_64.rpm
rpm -Uvh gnome-libs-1.4.1.2.90-44.2.x86_64.rpm
rpm -Uvh libstdc++-3.4.6-10.0.1.i386.rpm
rpm -Uvh libstdc++-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh libstdc++-devel-3.4.6-10.0.1.i386.rpm
rpm -Uvh libstdc++-devel-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh libgcc-3.4.6-10.0.1.i386.rpm
rpm -Uvh libgcc-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh make-3.80-7.EL4.x86_64.rpm
rpm -Uvh pdksh-5.2.14-30.6.x86_64.rpm
rpm -Uvh setarch-1.6-1.x86_64.rpm
rpm -Uvh sysstat-5.0.5-19.el4.x86_64.rpm
rpm -Uvh xscreensaver-4.18-5.rhel4.14.0.1.x86_64.rpm
rpm -Uvh openmotif21-2.1.30-11.0.1.RHEL4.6.i386.rpm
rpm -Uvh libaio-0.3.105-2.x86_64.rpm
rpm -Uvh libaio-0.3.105-2.i386.rpm
rpm -Uvh libaio-devel-0.3.105-2.x86_64.rpm
Note: some of them were already applied.
4) Changed /etc/sysctl.conf
kernel.shmmax=3221225472
net.ipv4.ip_local_port_range = 2024 65000
kernel.semmsl=256
kernel.semmns=32000
kernel.semopm=100
kernel.semmni=142
kernel.shmall=2097152
kernel.shmmni=4096
kernel.msgmax=8192
kernel.msgmnb=65535
kernel.msgmni=2878
fs.file-max=65536
net.core.rmem_default=262144
net.core.rmem_max=262144
net.core.wmem_default=262144
net.core.wmem_max=262144
Note: rebooted the server couple of times
5) /etc/hosts entry
[root@arun2 vmware]# more /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.2.5 arun2.devar.com arun2
6) openmotif:
[root@arun2 vmware]# rpm -qa| grep openm
openmotif-2.2.3-10.2.el4
openmotif-devel-2.2.3-10.2.el4
openmpi-libs-1.2.5-5.el4
openmotif-2.2.3-10.2.el4
openmotif21-2.1.30-11.0.1.RHEL4.6
7) added couple of params to /etc/resolv.conf
options attempts:5
options timeout:15
8) Another hostname file
[root@arun2 rapidwiz]# more /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=arun2.devar.com
9) there is no file called /etc/sysconfig/networking/profiles/default/network
[root@arun2 rapidwiz]# ls -l /etc/sysconfig/networking/profiles/default/network
ls: /etc/sysconfig/networking/profiles/default/network: No such file or directory
10) soft and all in /etc/security/limits.conf
# Added for Oracle
hard nofile 65535
soft nofile 4096
hard nproc 16384
soft nproc 2047
11) It fails at 33% of steps 2
12) I find most binaries are crashing. ldd command on binary doesn't show anything is missing.
13) file on libraries looks like this
[oracle6@arun2 ~]$ file /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1
/d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
/d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
It become challenging and frustrating for me. I am really exhausted. Any help would be greately appreciated.
Regards
-Arun
PS: snip of log file:
(a)
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for MARS6 instance
ADX Database Utility
(b) tail -30
/d01/oracle6/MARS6/db/tech_st/10.2.0/appsutil/log/MARS6_arun2/ApplyDatabase_02021441.log
Executable : /d01/oracle6/MARS6/db/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/d01/oracle6/MARS6/db/tech_st/10.2.0/appsutil/log/MARS6_arun2/adcrdb_MARS6.txt
Creating the control file for MARS6_arun2 database ...
exit_code=139
Checking for errors ...
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : arun2
sDbDomain : devar.com
sDbPort : 1537
sDbSid : MARS6
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@arun2.devar.com:1537:MARS6
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1537))(CONNECT_DATA=(SERVICE_NAME=MARS6)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1537))(CONNECT_DATA=(SERVICE_NAME=MARS6.devar.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase

Thanks, appreciate your reply. As I mentioned earlier, binaries are crashing. (side note: I am on 10th attempt, so SID=MARS10)
1) There is a connection issue, not sure why.
2) I see, something cored. .... adcrdb.sh: line 107: 30881 Segmentation fault sqlplus /nolog......(full text below)
3) ldd on sqlplus in case required
[oracle6@arun2 bin]$ ldd sqlplus
     libsqlplus.so => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so (0x0000002a95557000)
     libclntsh.so.10.1 => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1 (0x0000002a9574a000)
     libnnz10.so => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libnnz10.so (0x0000002a96ae6000)
     libdl.so.2 => /lib64/libdl.so.2 (0x00000039f7200000)
     libm.so.6 => /lib64/tls/libm.so.6 (0x00000039f7000000)
     libpthread.so.0 => /lib64/tls/libpthread.so.0 (0x00000039f7a00000)
     libnsl.so.1 => /lib64/libnsl.so.1 (0x00000039feb00000)
     libc.so.6 => /lib64/tls/libc.so.6 (0x00000039f6d00000)
     /lib64/ld-linux-x86-64.so.2 (0x00000039f6b00000)
4) last part of $ORACLE_HOME/appsutil/log/MARS10_arun2/ApplyDatabase_02061554.log
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : arun2
sDbDomain : devar.com
sDbPort : 1541
sDbSid : MARS10
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@arun2.devar.com:1541:MARS10
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=MARS10)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=MARS10.devar.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Fri Feb 6 15:54:57 EST 2009
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle6/MARS10/db/tech_st/10.2.0
ORACLE_SID : MARS10
TWO_TASK :
PATH : /d01/oracle6/MARS10/db/tech_st/10.2.0/perl/bin:/d01/oracle6/MARS10/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/softwares/appsr12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /d01/oracle6/MARS10/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle6/MARS10/db/tech_st/10.2.0/lib:/usr/dt/lib:/d01/oracle6/MARS10/db/tech_st/10.2.0/ctx/lib
Executable : /d01/oracle6/MARS10/db/tech_st/10.2.0/bin/sqlplus
The log information will be written to
     /d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/log/MARS10_arun2/adcrdb_MARS10.txt
Creating the control file for MARS10_arun2 database ...
exit_code=139
Checking for errors ...
.end std out.
/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/install/MARS10_arun2/adcrdb.sh: line 107: 30881 Segmentation fault sqlplus /nolog @/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/install/MARS10_arun2/adcrdbclone.sql "so" "$S_RDBMS_VERS"
egrep: /d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/log/MARS10_arun2/adcrdb_MARS10.txt: No such file or directory
.end err out.
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase

P35 Neo - XP Pro install fatal error

Hello
I have partially duplicated my post since the problem is different from the original thread.
But first....
MOBO - P35 Neo - MS-7360
CPU - Intel Core 2 Duo E6750
BIOS - V1.5
MEM - 4 x 1Gb 800Mhz DDR2
HDD - 1 x 250 Gb Maxtor SATA II (I have 2 but only connecting 1 for install.)
VGA - NVidia 8600 GT
PSU - WinPower ATX 600L - 600W max
Optical - Emprex 8x CD/DVDRW
The motherboard package and RAM was bought from Novatech and was tested before I installed it. Full specs can be seen here
http://www.novatech.co.uk/novatech/specpage.html?MBB-P35675,
and I got them to double up on the RAM.
HDD was also from them.
The problem arises after the first phase of the XP PRO install. I have been using a new copy of XP PRO with SP2 to do the install and initailly things go as expected. I format and partition the drive to create a 50Gb drive for the XP install, which happens without incident, then the machine reboots. Following reboot, the Windows XP branded part of the installation begins, with the 'Collecting information', 'Dynamic Update' and the 'Preparing installation' boxes already checked. Below these, it says that 'Setup will complete in approximately :39 minutes'. About 30 secs into this process, a message box comes up with the following;
Fatal Error
An error has been encountered that prevents setup from continuing.
One of the components that Windows needs to continue setup could not be installed.
Incorrect function.
Clicking on the OK box takes you to the logfile, which reads;
Error:
Installation Failed: D:\I386\asms. Error Message : Incorrect function.
Fatal Error:
One of the components that Windows needs to continue setup could not be installed.
Incorrect function.
Pressing OK after this reboots the machine and we go round again.
Things that I have tried to fix this:
1. Removed RAM, tried it with 2 and 1 DIMMs
2. Changed the optical drive.
3. Burned another copy of XP with SP2 at slower speed to ensure it wasn't the CD.
4. Used another HDD with same specs.
5. Scoured these forums and the net to find an answer, but nothing clear cut has arisen. Or have I missed it?
There have been a few threads which mention putting extra drivers into the XP PRO SP2 .iso, but since I am using 1 drive on SATA1 as well as an XP PRO with SP2 disk, this does not appear to be required. I have used the standard settings in the BIOS. Can anyone shine some light on what I am doing wrong?
Thanks for reading!

Sounds like it may be a optical drive or a bad ISO. Seems like people are having issues using Nero and recommend using PowerISO. edit: I noticed you you are using an OEM CD so more than likely either a scratched CD, a bad drive or cable.
Read this: http://www.nocrash.com/ncbbs/msgs/1075.shtml

Blu-ray Error: fatal error, code 6, audio buffer underflows...

Ughh.... So its been a few months since I stopped using CS6 Encore because it loves to crash for all kinds of bad reasons. Today I needed to do a new project, and used a simple 1920x1080p MP4 file created by Adobe Media Encoder, and used a basic menu template in Encore. Also added a slideshow timeline with one Mp3 audio set to loop. During the building image part of the build process, I get the fatal error code 6, audio buffer underflows. Total bitrate too high neat time = 0.00000 seconds -
First off, I set the BR transcode setting to auto and it spends pleanty of time transcoding the file to a 15mbps bitrate, so why is Encore not first taking care of all the source files correctly in transcoding...?

Ok.... 100% the fault of the software. I am an SE, and build systems all the time for my business, so if I knew of these simple problems, Id go into the code and devise a solution...please Adobe, fix Encore.
Here are my simple finding from solving this problem (first post):
- Of the 2 simple Mp4 files produced by Media Encoder, one, which runs only 2 minutes, had a peak of a little over 10mbps. I dropped the file back into Encoder and set the same mp4 profile to max of 6mbps and then replaced the file in the encore project, ran build and it worked fine.
SO.... If I can use a simple free bit of software to look at the bitrate of a file (google Bitrate Viewer) and determine that the peak was possibly too high, why oh why cant adobe write a better transoding logic algorythm to decide if a video in a timeline needs to be reprocessed at a slightly lower bitrate before just attempting a build and then throwing an error. For the love of all that is holy, please tweek your transcoding decision process to prevent these simple errors.

Kgefec:fatal error0; OCI-21503:program terminated by fatal error; OCI-04030

Hi expert,
I've hit the following errors when I tried to start my application using the corbaloc call:- Would appreciate your expertise adv and helps, please~!
dlys_storage_prep_srvr -ename INT -pname DLYS_PREP_SRVR -ORBInitRef NameService=corbaloc:iiop:uxkulaix01:19001/NameService -ORBInitRef ImplRepoService=corbaloc:iiop:uxkulaix01:19002/ImplRepoService -ORBInitRef LoadManager=corbaloc:iiop:uxkulaix01:19007/LoadManager -ORBUseIMR 1 -instance DLYS_PREP_SRVR_2 -phaseID 1 -jobID 2109 -requestID 0 -scheduleUser SYSTEM
kgefec: fatal error 0
kgefec: fatal error 0
kgefec: fatal error 0
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 512 bytes (Alloc statemen,pref col alloc)
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 224 bytes (Alloc statemen,pref col alloc)
kgefec: fatal error 0
kgefec: fatal error 0
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 272 bytes (Alloc statemen,pref col alloc)
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 176 bytes (Alloc statemen,pref col alloc)
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 392 bytes (Alloc statemen,pref col alloc)
Errors in file :
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 272 bytes (Alloc statemen,pref col alloc)
kgefec: fatal error 0
Errors in file :
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 176 bytes (Alloc statemen,pref col alloc)
Errors in file :
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 392 bytes (Alloc statemen,pref col alloc)
----- Call Stack Trace -----
Errors in file :
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 512 bytes (Alloc statemen,pref col alloc)
----- Call Stack Trace -----
Errors in file :
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 224 bytes (Alloc statemen,pref col alloc)
calling call entry argument values in hex
----- Call Stack Trace -----
location type point (? means dubious value)
calling call entry argument values in hex
calling call entry argument values in hex
location type point (? means dubious value)
location type point (? means dubious value)
----- Call Stack Trace -----
kgefec: fatal error 0
----- Call Stack Trace -----
calling call entry argument values in hex
calling call entry argument values in hex
location type point (? means dubious value)
location type point (? means dubious value)
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 536 bytes (Alloc statemen,pref col alloc)
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 656 bytes (Alloc statemen,pref col alloc)
Errors in file :
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 536 bytes (Alloc statemen,pref col alloc)
----- Call Stack Trace -----
Errors in file :
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 656 bytes (Alloc statemen,pref col alloc)
calling call entry argument values in hex
location type point (? means dubious value)
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
kgefec: fatal error 0
OCI-21503: program terminated by fatal error
OCI-04030: out of process memory when trying to allocate 296 bytes (Alloc statemen,pref col alloc)
SQL> SQL> select * from v$pgastat;
NAME VALUE UNIT
aggregate PGA target parameter 314572800 bytes
aggregate PGA auto target 243984384 bytes
global memory bound 62914560 bytes
total PGA inuse 43478016 bytes
total PGA allocated 85145600 bytes
maximum PGA allocated 85963776 bytes
total freeable PGA memory 15204352 bytes
process count 50
max processes count 51
PGA memory freed back to OS 10616832 bytes
total PGA used for auto workareas 0 bytes
NAME VALUE UNIT
maximum PGA used for auto workareas 155648 bytes
total PGA used for manual workareas 0 bytes
maximum PGA used for manual workareas 0 bytes
over allocation count 0
bytes processed 30577664 bytes
extra bytes read/written 0 bytes
cache hit percentage 100 percent
recompute count (total) 516
19 rows selected.
# Instance Identification
instance_name=ICTINT
# Database Identification
db_domain=""
db_name=ICTINT
# Cache and I/O
db_block_size=8192
db_cache_advice=ON
db_keep_cache_size=0
#db_file_multiblock_read_count=32
#db_writer_processes=4
db_files=200
disk_asynch_io=FALSE
filesystemio_options=NONE
# Optimizer Settings
optimizer_index_caching=50
optimizer_index_cost_adj=50
optimizer_mode=FIRST_ROWS_1000
query_rewrite_enabled=TRUE
star_transformation_enabled=FALSE
# Cursors and Library Cache
open_cursors=1500
cursor_sharing=FORCE
cursor_space_for_time=TRUE
# Diagnostics and Statistics
background_dump_dest=/emcoracle/admin/ICTINT/bdump
core_dump_dest=/emcoracle/admin/ICTINT/cdump
user_dump_dest=/emcoracle/admin/ICTINT/udump
timed_statistics=TRUE
# File Configuration
control_files=("/oradata/ICTINT/data/control/control_01.ctl",
"/oradata/ICTINT/index/control/control_02.ctl")
# Job Queues
job_queue_processes=10
# Miscellaneous
aq_tm_processes=1
compatible=10.2.0
log_checkpoints_to_alert=TRUE
recyclebin=OFF
# Pools
#java_pool_size=0
#large_pool_size=16777216
#shared_pool_size=524288000
sga_max_size=2G
sga_target=2G
# Processes and Sessions
processes=250
# Redo Log and Recovery
fast_start_mttr_target=300
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
audit_file_dest=/emcoracle/admin/ICTINT/audit
#audit_trail=true
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=100M
workarea_size_policy=AUTO
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_retention=900
undo_tablespace=UNDOTBS1
# Archiving
#log_archive_start=TRUE
#log_archive_dest_1='location=${ARCHIVELOG}'
log_archive_format=ICT_%d_ARC_%t_%s_%r.arc

That error means that Oracle is not allowed to allocate the memory by the operating system.
This is not a bug of Oracle; the problem must be somewhere else.
- How much memory has the process allocated when it produces this error?
- Did you set the per-process memory limits of the operating system high enough?
- Did you start the Java Virtual Machine with a sufficient maximal stack size?
If the problem only occurs after a longer runtime, you might also consider the
possibility that your code has a memory leak.
Yours,
Laurenz Albe

Fatal error on php image upload

I'm trying to test a popular CMS system on my mac and I'm getting the following error when trying to upload a single image.
Fatal error: Allowed memory size of 10485760 bytes exhausted (tried to allocate 7776 bytes) in /Library/WebServer/Documents/FlashModX/assets/snippets/maxigallery/watermark/Th umbnail.class.php on line 183
My php.ini settings are:
memory 128
post max size 8
upload max filesize 2m
max execution time 30
max input time -1
what do I need to change?

thanks for googling. You know I did google and found something similar and did try to add the init to my php file but it really did not work. I was up to 80m which seems a bit much when trying to load a single 480kb file. This is why I posted here in the mac discussions.
I normally trust the information that I get here and not necessarily from google results.

Fatal Error: Failed to open handle for AFLVCG61.msi

Fatal error occured while installing Device Drivers CD. I have no clue Help.
Message says Failed to open the handle for D:\components\max\AFLVCG61.msi.
And, the details says:
K:\NIInstallers\dev\1.1.2\src\UberInstaller\IniFileInfo.cpp(968): IInstallerError 11002
Fatal Error. Failed to open handle for D:\components\max\AFLVCG61.msi.
Failed to open database handle for D:\components\max\AFLVCG61.msi.
Msi Error: 110
Error Record:
Exception code: E06D7363 ()
Fault address: 7C59BBF3 0001:0002ABF3 C:\WINNT\system32\KERNEL32.DLL
Registers:
EAX:00FEF1D8
EBX:0041E507
ECX:00000000
EDX:0000000C
ESI:00FEF268
EDI:00FEF1F8
CS:EIP:001B7C59BBF3
SS:ESP:002300FEF1D0 EBP:00FEF228
DS:0023 ES:0023 FS:003B GS:0000
Flags:00000206
Stack Trace
Address Frame LogicalAddr Module SymbolName + Offset
7C59BBF3 00FEF228 0001:0002ABF3 C:\WINNT\system32\KERNEL32.DLL RaiseException + 86
004C3160 00FEF268 0001:000C2160 D:\setup.exe
0041E5CC 00FEFA5C 0001:0001D5CC D:\setup.exe
0044DA59 00FEFB40 0001:0004CA59 D:\setup.exe
0043EAE0 00FEFB84 0001:0003DAE0 D:\setup.exe
004402BF 00FEFCDC 0001:0003F2BF D:\setup.exe
00463C4B 00FEFD84 0001:00062C4B D:\setup.exe
00463D46 00FEFDA8 0001:00062D46 D:\setup.exe
0046B4A1 00FEFDF0 0001:0006A4A1 D:\setup.exe
0046B55E 00FEFF18 0001:0006A55E D:\setup.exe
004EB185 00FEFF80 0001:000EA185 D:\setup.exe
004C8EED 00FEFFB4 0001:000C7EED D:\setup.exe
7C57B388 00FEFFEC 0001:0000A388 C:\WINNT\system32\KERNEL32.DLL lstrcmpiW + 183

Hi LegalEngineer-
Which operating system are you using? It seems like either you got a bad Driver CD disk or that your Windows Installer might need to be updated.
You can find updated driver downloads for all NI hardware at Drivers and Updates at ni.com. I generally prefer this method because it avoids installing unnecessary software and also ensures that all drivers are up to date.
Regards,
Tom W
National Instruments

How OC4J handles fatal error codes

1. Does OC4j cleans/closes all connections in the connection pool when OC4J detects fatal error codes? Does OC4J really work as per oracle documentation? Can I get an example showing how is it done?
Oracle Documentation says:
For each data source defined in data-sources.xml, you can define fatal error codes that indicate that the back-end database with which the data source communicates is no longer accessible. When OC4J detects one of these error codes (stated when a SQLException is thrown by the JDBC driver), OC4J will clean its connection pool. That is, it closes all connections in the connection pool. For Oracle, the predefined fatal error codes are: 3113, 3114, 1033, 1034, 1089, and 1090.
2. When OC4J detects fatal error codes defined in an connection pool in data-sources.xml, how connections in the connection pool are handled by OC4J?
3. When OC4J detects fatal error codes on one connection to Oracle database, then will OC4J restore / close the connection back to connection pool?
4. Does OC4J really work on fatal error codes?
Sample code of connection pool I used in data-sources.xml file where I defined fatal error codes:
<connection-pool name="FSCMDS" inactivity-timeout="30" initial-limit="5" max-connections="5" validate-connection-statement="select * from dual">
<connection-factory factory-class="oracle.jdbc.pool.OracleDataSource" user="" password="" url="" commit-record-table-name="">
<proxy-interface sql-object="PreparedStatement" interface="oracle.jdbc.OraclePreparedStatement"/>
<*fatal-error-codes*>
<*error-code code="3113"*/>
</*fatal-error-codes*>
</connection-factory>
</connection-pool>
Please post answers on these questions...
Thanks
Venkat

This forum is for general database questions, post your question here:
OC4J
Werner

Resman has fatal errors when run from start menu

I have a VME chassis connected to my computer via an NI MXI-2 bus. When I run resman out of MAX, it works fine. When it automatically runs on startup or when I run it from the start menu, it bombs out with a windows fatal error. This has happened for years, on multiple different computers. This isn't a huge deal, so I haven't investigated it before. Is this a known bug? Is there a way to fix this annoyance? I'm running latest driver versions of everything, although the VXI driver has remained static for quite some time from NI.
I just discovered the different operation today - start menu vs. in MAX. I think it may be a clue...

This is somewhat of a known issue. Take a look at the following KB:
http://digital.ni.com/public.nsf/allkb/851CD72FA50001B0862571100081237B?OpenDocument
Chad B. » National Instruments » ni.com

Fatal Error while sending a fax

Hello
I'm having this problem with one of my users the company.
we have a fax server that is working almost fine for everyone but one specific user, whenever she tries to send a fax from her client computer, after dialing and when it says Transmitting...a Fatal Error comes up,, Event
ID 32028
I did all the suggested actions by Microsoft and other people in the forum, no luck
today i tried something else, send a fax with same user on another client computer...same error
so this is a user problem..i checked all the permissions and FAX USERS group, it is the same like others
please help!!

Hi,
For Event ID 32028, please refer to following article and check if can help you to troubleshoot this issue.
Event ID 32028 — Sent Fax Status
Meanwhile, please open Registry Editor and follow the path:
HKEY_CURRENT_USER\Software\Microsoft\Fax folder when the problematic user account logon, then compare with other user accounts which can be used to send fax as normal. Any difference?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Adobe Illustrator CS3: Fatal error during installation

Hello,
I just bought the AI CS3. It installed OK on my friend's laptop (windows). However, when I clicked the big button in the installation:
"Install Adobe Illustrator CS3"
A window showed:
Initializing Adobe Illustrator...
Then I got a message:
"Setup has encountered an error and cannot continue. Contact Adobe customer Support for assistance. Fatal error during installation".
I've tried several times. My computer meets all the requirements (it's a really new and faster PC). And there's no old versions of AI on it yet.
Can anyone help? Thanks!!!

Do you have any other Adobe products on your computer? When I installed CS3 on my Mac, I kept getting failures. After contacting Adobe, they told me I had to delete ALL other Adobe products -- including Flash and Adobe Reader. Plus, I had to do searches and delete any support files associated with them. It took hours!

Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility bu

Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility but nothing seems to work. Exit code: 7.

Hi Maarton,
Please follow the link to resolve the issue: Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
-Ankit

Fatal Error: missing resource: java.util.PropertyResourceBundle =Urgent

Hi all,
In the JSP ,if I include the statement <%@ page import="jack.samples.*" %>
it is throwing following error:
This is the Error Message from the Exception:
     Server caught unhandled exception from servlet [BaseServlet]: Server caught
     unhandled exception from servlet [CategoryDisplay]: Server caught unhandled
     exception from servlet [jsp]: Fatal Error: missing resource: java.util.PropertyResourceBundle
     I am using Websphere 3.5 on Windows NT.
     can somebody please help me what is going wrong here ???I am stopped at
     this problem for last 2 days.
Thanks
Jack

Hi,
Finally I was able to resolve after adding this jar file to the classfile
path of the application.
Now,I am trying to access use linkTable.add(new Item(222,"222","333",12.33)) in JSP.
where linkTable is a LinkedList.
It fails giving following error:
This is the Error Message from the Exception:
Server caught unhandled exception from servlet [BaseServlet]: Server caught unhandled exception from servlet : Server caught unhandled exception from servlet [jsp]: Compilation of "softproduct.jsp" failed: d:\ibm\WAServer\temp\default_host\WCSServlets\_jameco_2F_softproduct_2E_jsp_jsp_2.java:824: No constructor matching Item(int, java.lang.String, java.lang.String, double) found in class jack.samples.Item. linkTab.add(new Item(2222,"222","222",22.33)); ^ Note: d:\ibm\WAServer\temp\default_host\WCSServlets\_jameco_2F_softproduct_2E_jsp_jsp_2.java uses or overrides a deprecated API. Recompile with "-deprecation" for details. 1 error, 1 warning
I dont understand why it is failing to add Item object to LinkedList.
can somebody help me in the forum in this regard.
Thanks
Jack

Itunes: Fatal Error During Installation (it wont download at all) HELP!

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
+*Preparing to install...*+
Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
Then another window pops up saying:
*+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
*+Verify that you have access to that directory.+*
and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
*+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
+*Verify that you have access to that directory.*+
Then after this i went to the folder
+*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
WHAT DO I DO?!?!? please can someone help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

if it helps at all...
I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
...is there any possible way that anybody can help me out with this.
any help that anyone can offer is very greatly appreciated,
Please & Thank You.

Na Fatal error is PCI1200 in MAX zichtbaar , error on selected base adress

Similar Messages

Maybe you are looking for