NAC Agent does not pop up after psn fails.

So I'm in the middle of a deployment where I have 4 ISE appliances, two in one location and two in another location.
The first location has 2 with all personas installed, whereas the other two are only PSN. In each area, NAC agent pops up normally after connecting/swapping to wired or wireless networks. During HA tests I have encountered that when the two ISE from the remote area fail (shutdown switch port for testing of course) the client does get authenticated but it stays in the POSTURE_REQ state on wireless and the Agent fails to pop up.
- I have tried forcing the servers on the profile on ISE (provisioning) and I can see how it is somehow updated on the xml configuration file in the remote endpoint but still the nac agent wont pop up.
- Increased timeout timers also, no luck.
- Reinstalled NAC agent manually and by ise auto provisioning, no luck.
- Ran a wireshark capture and saw requests sent to the default GW with the positron thing but never get an answer, but then I try connecting to the ISE manually https://(ADMIN_NODE_FAR_FROM_ENDPOINT)/guestportal/gateway?sessionId=(gibberish)&action=cpp and it works, so it is reachable from the endpoint
I believe there is some kind of sync problem, my ISE are in UTC time and NADs have local timezone, but then why does it work locally??
Any thoughts on this?
Thank you for all your kind help

You have done a reset. What does that mean? Did you reset all settings?
Settings>General>Reset>Reset all Settings. You will have to enter all device settings again.

Similar Messages

"Copy" does not pop up after selecting

About half the time, when I need to copy something in an email message, the option does not pop up. I select the text that I want, but the bar that lets you select Copy, Cut, Paste, etc., doesn't come up.
When this happens, is there anything I can do? I have already done a reset and a hard reset to see if that would make a difference, but no luck. And the selection can be anything. For example, just now I wrote a long message and before I send it, I want to make a copy of what I wrote. I selected the text but nothing popped up so I can't do anything with the selection. This is a clean message...there are no photos or a string of messages, etc.
Thanks.

You have done a reset. What does that mean? Did you reset all settings?
Settings>General>Reset>Reset all Settings. You will have to enter all device settings again.

Problems with the Cisco NAC agent, does not perform remediation??

Good Morning
I'm doing an implementation of NAC, but when the user is authenticated, the agent informs you that does not comply with defined security policies, to start the repair and re-scan the machine error appears "NAC Server is not available on the net" . The policy I am doing is to check a file on local disk C
Deputy error screen
I appreciate your responses as soon as possible

the problem i have is when it moves into remediation....phase 2. If no remediation is being done (ie no checks, rules scans etc) then it moves directly from phase 1 (authentication) to phase 3 (authenticated user and assign role) and all works fine.
I've looked under all the traffic rules and can see nothing that would mean it could not contact the CAS. There are some differences in 4.7, like the ethernet traffic filter. It seems to me when put in the temp role, the vlan should still be the auth vlan. There is a role based vlan option under edit roles, but it states that is only for normal login, not tem agent, so it should not apply.
Im starting to think something has gone wrong with the upgrade code somewhere....TAC looked at my config and could see nothing on a quick check, im working with them to resolve the issue

ITunes 12.0.1 does not pop up

iTunes 12.0.1 does not pop up after I press the icon after installation. I am using OS X10.10. Any idea?

Hello Herberndt,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone is not recognized in iTunes please follow the steps in the article below.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Take care,
Alex H.

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

It actually sounds like the warp text window is opening off screen.
Resetting the photoshop elements 10 preferences should fix it.
*Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
*Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
*Press Yes

After my ipod touch restarts because it says plug into itunes and i does not pop up it does not appear in the apple window like it said it would.

After my ipod touch restarts because it says plug into itunes and it does not pop up it does not show up in the itunes window like it says it would. why.

Start here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

TS4425 How can i do when the latest iCloud Terms & Condition does not pop up?

When I go to photo stream on my appletv, it says "unable to sign in The icloud terms of service have changed. For more info, go to http://www.apple.com/support/icloud".
I have tried this resolution on my iphone and ipad already:
On your iOS device, tap Settings > iCloud.
Note: Verify that this is the same Apple ID you are using on the Apple TV.
After a moment, the latest iCloud Terms & Conditions will load.
Unfortunately, it does not pop up the icloud terms and condition for me to accept.
Anyone can help me?
Thanks all~

Caused by the Ask Toolbar extension in Firefox 3.6.13, disable that extension or un-install it.

PSE7 BACKUP/SYNC AGENT does not work.

Under the Preferences box , the Backup/Sync Agent does not open. I can't alter or change anything. When I sign in , my sign in and password are both accepted ,however where the Welcome is on top, it used to say Welcome, with my first name. It does not do this anymore. When I try to upload my pics to Photoshop.com it states I am not logged in. No one at Adobe has been able to help after 4 months .

Hi,
Can you please contact me on [email protected]
I would like to suggest few things offline...

I am unable to write address in contacts as keyboard does not pop up

I am unable to write address in contacts as keyboard does not pop up. How do I input address?

To migrate your data to a new iCloud account go to Settings>iCloud and turn off all synced data (contacts, calendars, etc.), when prompted choose to keep the data on your phone. After everything is set to off, scroll to the bottom and tap Delete Account. Next, create the new iCloud account on your phone and turn on syncing for contacts, calendars, etc again. If prompted, choose Merge. This will upload your data to the new iCloud account.

Gmail task list does not pop-out

After installing 3.6.7 gmail task list does not pop out. When I click the pop-out arrow, the task list opens in another tab, not in another stripped down window like it used to. Any ideas?
== URL of affected sites ==
http://

Dear,
Is this quality Plan is back dated and Lot size should be 1 to 9999,999.
Why are you creating rate routing? check lot for 04 insp type in QA02.
Or for old material just create one new order and test it once again.
You can check the statuses in config.
QM>Quality Planning>Inspection Planning>General>Define Task List Status.
You should find that "4" is in there with all the check marks on.
QM--> Quality Inspection --> Inspection Lot Creation --> Maintain Inspection Lot Origins and Assign Inspection Types.
There is a column called status. For each inspection ORIGIN, you can specify the status of the inspection plan. It appears someone in your system changed the 4's to an X and then created the status "X".
Regards,
R.Brahmankar

Button does not pop back.

Hi,
I trigger a dialog on mouse down event on one button which is located on my GUI. But after the user finished the dialog the button that invoked the dialog does not pop back. Is the button supposed to pop back automatically or am I supposed to programatically pop it back?
Thanks.

RSibagatullin wrote:
Hmm,
I just checked the button and it says "Latch when pressed". Will changing event to "Value change" help me?
No, this will not help. In order for a latch action boolean to revert, it needs to be read by the code, i.e. be in the dataflow. If the terminal of the boolean is somewhere random on the diagram there is no garantee that it will get read after a press (e.g. If the terminal is outside the main while loop, it will be in the dataflow exactly once at the start of the program and then never again).
Why don't you attach a simplified version of your program so we can see where the problem is.
LabVIEW Champion . Do more with less code and in less time .

HT202667 The "edit" button does not pop up next to my Apple ID and Primary Email Address

The "edit" button does not pop up next to my Apple ID and Primary Email Address. I want to change my address because its an old @mac.com address and I want to update it with my @gmail.com. I'm guessing this is an apple support question, but I would like to just get it fixed.

Just making sure we are comparing Apples to apples, so to speak.
If this is NOT what you see at My Apple ID - then Apple ID: Contacting Apple for help with Apple ID account security
It seems that for SOME folks it takes contact with a live person at Apple - can't explain why though. One person replied that after contacting Apple, they were instructed to email [email protected] with old and new. I never heard back if that was successful or not - just that the email was instructed.
ÇÇÇ

I am not able to email a file from Adobe Reader. When I click to share the file, the option does not pop up to share (via Mail, Message, Air Drop, etc.).

I am not able to email a file from Adobe Reader. When I click the button to share a file, there is no option for route from which to share (Message, Mail, Air Drop, etc. does not pop up).

What version of Reader and OS X?

User POV does not pop up from Report in task list

Hello,
I've created a report within Related Content in HFM and added it to a task list--the problem I'm experiencing is when I run the report the User POV does not pop up, rather it simply uses the default POV (ie, whatever is set up in data grids or process management)--this happens if I try to run it directly from Related Content or from the task list. My preferences within Financial Reporting have already been updated to 'On' to preview the User POV and if I run the report from Financial Reporting (ie, Explore) the User POV works fine--so, it seems like adding a report to Related Content disables the User POV from popping up. I'm running on Financial Reporting v11.1.2.1 and HFM v11.1.2.1.104.3701. I can't find anything about it within this forum, knowledge base or as a known issue in the ReadMe for the .104 patch set for HFM.
Can anybody fill me in on if this is functionality by design or a defect?
Best regards,
Jason Call

Financial Reports do not work as you might expect when they are used as a related content item. As you already have realized, you will not be able to adjust the FR POV items from inside of HFM.
A 'work around' would be to link to the report and put that link in the Tasklist. This will then open the report 'normally' and you will get the POV functionality that you expect.
To find the link to a report, open the report's properties and look at the 'smartcut' value. (That is a URL directly to the report)

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

NAC Agent does not pop up after psn fails.

Similar Messages

Maybe you are looking for