NAC and Client Network Settings (registry)

Is there a way with NAC to ensure IP Routing is not enabled on the client similar to the Microsoft VPN?
See:
http://www.microsoft.com/technet/community/columns/cableguy/cg1003.mspx
for information on how MS handles IP Routing and VPN

You cannot disable the IP routing with NAC on the client.

Similar Messages

I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank

I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.

See iPhone BT profile on what can be connected/paired:
iOS: Supported Bluetooth profiles - Apple Support
And BT troubleshooting:
iOS: Troubleshooting Bluetooth connections - Apple Support

I have just upgraded to a Iphone 5c and now it wont send imessages to my partners Iphone 4, and when it sends as a text he is not recieving them. We have tried turning phones on and off, rebooting and restoring network settings and nothing seems to work?

I have just upgraded to an Iphone 5c, and now i cant send imessages to my partners Iphone 4.
Then when it times out to send as a text message he isnt recieving them and vice versa.
We have tried turning off and on, rebooting and reseting network settings and nothing works?

Call Sprint back and ask to speak to a supervisor.

My wifi wasn't working for more than 10 minutes at a time after updating to IOS8 and resetting network settings. I turned off google drive, turned off Bluetooth, reset network settings and rebooted my iPad4. So far so good.

I have an ipad4. Wifi keeps cutting out after the upgrade even after I forget the network and resign on or reset all network settings. I deleted iCloud drive from my iPad, turned off Bluetooth, reset network settings, and rebooted my iPad. Since I upgraded to IOS8 this is the longest wifi has consistently been working for me. Which is approximately an hour now. Anyone else find that this worked or have figured out if this or anything out there is a permanent fix?

Hi CollinGCC78,
It sounds like you have been on the right track in troubleshooting this issue. If you are still having issues, you may want to double-check the steps outlined in the following article, in order if possible (apologies for replicating any steps you have already taken):
iOS: Troubleshooting Wi-Fi networks and connections
Regards,
- Brenden

Iphone4s no longer connecting to wifi and missing network settings

Earlier today I was using Wi-Fi at work then I went outside and the Wi-Fi went off. I was using the Wi-Fi on my iPhone 4s. When I came back inside it did not automatically go to the Wi-Fi I had to sign in and use the password it kept spinning and spinning and spinning it would never sign it at that time. I tried to forget the network reset the phone do all these things it never would sign into the network again I could never get back on Wi-Fi at work. Then I came home and my phone used to automatically attach to my home network so it did not and I had to use my home password and it gave the message unable to join network. So I tried to sign in manually and renew the lease but there was no renew the lease button. So then I was going to try to forget the network and start over but there was no forget the network button. So I tried to reset the network settings and that did not change anything there was still no renew the lease button nor forget this network butto I still cannot sign into my home Wi-Fi

Reboot your router by unplugging it for 30-60 seconds, then try again.

About maintenance windows and client restart settings

Scenario:
I have an application which is configured so that ConfigMgr Client will force a restart after the installation. This application is going to be deployed to a collection of computers which are also members of another collection that has maintenance window
of 3 hours configured. The default client settings for all the computers have been configured so that users are notified about possible restart for 1440 minutes (24h).
When the deployment is made:
If there are logged on users (on the desktop or locked screen), will the software just install in the 3 hour maintenance window and notify the user about the reboot for 24h after the installation?
If there are not logged on users will it install and reboot the computer?
How this kind of thing should be configured so that the computers will reboot in the maintenance window if they automatically do not with these settings (if or if not there are logged on users on the computers) ?

So I tested this:
User logged on during the MW -> Software installation starts at the maintenance window but asks for the reboot from the user so no go here
User not logged on during the MW -> Software installs and reboots straight away
Solution I'm thinking:
Client Settings Collection that includes all the Maintenance Window Collections and I shall deploy different Client settings (where the reboot time is less than the actual MW) to that collection. This could be also handled with "Install only when user is
not logged on" for the application's deployment type but then again I don't think you can do that kind of setting for software updates or do you?

My iPhone 6 will not show battery percentage at all and keeps vibrate on even when manually turned off and yes I have reset the phone and reset network settings and restored, update etc etc

My iPhone 6 just went funny. It will not show the batter percentage anymore and the alerts are coming through vibrating even when I have switched them off. Please help! :-(

To turn battery percentage back on: Settings>General>Usage>Battery Percentage --switch on.

Any idea why British Eurosport stopped working. Have reinstalled app and reset network settings.

The app suddenly stopped working.
Any ideas ?

Yes to 1st and No to 2nd.
I already contacted British Eurosport , it was them that suggested reinstalling the app.
I don't know of anything that has changed since it did work.
Thanks for your reply.

Little help on Network Settings

Can someone help me understand the real differences between Reset All Settings and Reset Network Settings under Settings > General > Reset? I read the User's Guide but it did not give much detail. Any examples on why I would reset either of the above?

Thanks, I was trying to see if one of these would fix my Yahoo Push problem. I'm not getting my Yahoo mail pushed to my iPhone. I have to manual refresh. But I have two Yahoo accounts on my phone and one is being pushed and the other one is not. I've deleted both accounts, rebooted the phone, and added back the accounts and nothing. Still not pushing on the default account.

[SOLVED] Cinnamon - network settings kind of broken

Hey,
after the last huge update -everything went fine- my network setting seem to be broken, although I'm online. When clicking "Network" in Cinnamon's system systems or right clicking on the NetworkManager applet and selecting "Network Settings" an additional popup appears saying:
The system network services are not compatible with this version.
I can simply close it and then look at my network setting, but the interface doesn't show up anymore.
I have no clue how to fix this, here are some information:
[klemens@arch-pc ~]$ psl network manager
local/libnm-glib 1.0.0-1
NetworkManager library
local/libnm-gtk 1.0.0-1
NetworkManager GUI library
local/network-manager-applet 1.0.0-1
Applet for managing network connections
local/networkmanager 1.0.0-1
Network Management daemon
local/networkmanager-openconnect 1.0.0-1
NetworkManager VPN integration for openconnect
local/networkmanager-openvpn 1.0.0-2
NetworkManager VPN plugin for OpenVPN
[klemens@arch-pc ~]$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether e0:56:88:41:77:e6 brd ff:ff:ff:ff:ff:ff
As already mentioned, my internet connection works fine, it's just not configurable through cinnamon anymore. Is anyone experiencing similar behaviour?
Last edited by klenamenis (2015-02-10 00:02:29)

yup seems to be a version issue. There is some version check in cinnamon-control-center
https://bbs.archlinux.org/viewtopic.php?id=192939
Although I can still edit network connections. Clicking on the network Manager applet has to options at the bottom "Network Setting" (doesn't work) and "Network Connections" which shows another dialog to edit connections this one works. It might that it comes with the network-manager-applet package. If so this might be a workaround until the version check in the control center gets fixed upstream.
Another solution would be to apply the patch proposed in the thread I linked but I didn't try that.

WPA2 used to work on my iPad but after doing Reset Network Settings, I always get "Incorrect Password'. If I remove security I connect immediately

I have used this iPad for years on my home network. I have used it for Months with my new Netgear Router, It was being used yesterday when trying to troubleshoot why an app (Amazon Prime Viewer) would let me connect although I could connect to the internet thru Safari and browse web pages and my email was working. The support at Amazon asked me to go to settings and Reset Network Settings. After that it will not connect to wi-fi if I have encryption of any kind turned on but I can cooect with no problems if I turn off encryption. With encryption the ipad immediately comes back with "Incorrect Password for Network" error. Does anybody know what is going on?

Have you looked for debris in your headphone jack?

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I have the same problem; tried a phone restore, both restoring data and setting up as new phone with factory settings, reset all settings, re-boot, remove apostrophe, put in fridge, you name it!
I think there's quite a few iphone 4s users with the same problem!
I called Apple they said it's a hardware problem, but it has worked for nearly two years; they say go to the Apple store and they can provide a replacement phone for approx. £150!
I've been into the O2 shop where I bought it and they knew the problem exactly; said they had sent a few phones off for repair and had them back awith a report they cannot fix it because it's a software problem!
An assistant in the shop had the same issues; logic says it's a software problem and hopefully Apple will fix it with a patch but at the moment they seem to be avoiding everyones comments!
If anyone else has any ideas these would be appreciated?

Configure network settings on clients

Well I've finally tracked down a very annoying problem with using aiport and network logins. I'm looking to find a way to create a new network location and its settings for aiport for all the clients with a shell script. I haven't been able to find any plist or unix utility that would let me create a location, or edit the current location such that:
aiport is the only enabled port
choose to join preferred network
choose to auto join and open network
I'm really hoping not to have to do these steps 60 times in the UI.
-Preston

I usually use ZTINICConfig.wsf of MDT
to capture those network settings. That means that I add the following two steps to my task sequence:
A Use Toolkit Package step, to copy the MDT package;
A
Run Command Line step, with the command %Scriptroot%\ZTINICConfig.wsf /ForceCapture, to capture the network settings.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

I have had my ipod 4th generation for a year now and had not had any problems until now. My ipod no longer connects to my WiFi. i have reset my network settings, forgot my network and followed all of Apple's advice. Any ideas?

The WiFi isn't working on my 4th generation anymore. I have several devices connected to the WiFi which two of them are iPhone 5 that haven't had ant problems with WiFi. I have had my iPod for a year. I have tried everything and it still doesn't work. Any ideas? Thanks.

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

IPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset. What am I missing?

iPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset. What am I missing?

Call your phone carrier - that's a problem for them to resolve.

NAC and Client Network Settings (registry)

Similar Messages

Maybe you are looking for