NAC CAM HA not working since upgrade to 4.8

Hi,
I have just upgraded my two NAC CAM servers to 4.8. They were previously running on 4.6. They are configured with eth0 on one LAN (fully routed), and eth1 and eth2 sitting on totally private LANs, each with a small /30 subnet to use. These are just a couple of small VLANs between two 4848 switches. It's basically configured as:
Server -- Switch -- Portchannel group -- Switch -- Server. Other VLANs also traverse the link and are fine. Portchannel is up and happily passing traffic. The VLANs appear active too (they are simply layer 2 VLANs - no routing or anything. Literally point to point).
I followed the upgrade instructions as per the release notes. However, since they have been unable to see eachother for HA. Pings between the HA interfaces produce no reply. I have found if I run tcpdump on one server, and fire a ping at it from the other, a ARP will arrive asking who has the IP, and it will reply, but it goes no further. Nothing has changed on the network side, so I'm a little flummoxed now.
Consequentially, one box will load up happily, the second will always tell me:
[root@xxxxxxxx bin]# ./fostate.sh
My node is dead, peer node is unknown
The 'working' node will show:
[root@xxxxxxxx bin]# ./fostate.sh
My node is active, peer node is dead
Ifconfig shows the interfaces as up - they can ping themselves after all.
Any help most gratefully received!

Hi:
I have an iPhone 3G (16GB) that I upgraded a couple weeks ago with the iOS 4.0 and although I haven't had any problems with those applications that I use regularly, I have not tried out the ones I don't use regularly. The problem I've been experiencing is that when I use the start button on the front to boot up, the slider to unlock won't move--I have to use the top edge button to boot up and slide/unlock. Even then, sometimes the application icons won't respond and I have to start all over again. Anyone else have this irritating deficiency?
Medren

Similar Messages

My built in camera is not working after upgrading to a new Skype version

my built in camera is not working after upgrading to a new Skype version

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

You just need to update it to the latest version. See:
http://kb.parallels.com/114449

Home sharing on apple tv not working since upgrade to yosimite

home sharing with my Apple TV (gen 3) and iMac not working since upgrading iTunes (12.0.01.26) and installing Yosemite (10.10) on my iMac (2008).
everything worked fine before this!

Hey stephenfromdominion,
Thanks for the question. I understand that you are experiencing issues with Home Sharing after upgrading to OS X Yosemite. For troubleshooting information, check out the following resource:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks,
Matt M.

My cam dose not working since i download ios6.1.3

My cam dose not working since i download ios6.1.3

My cam dose not working since i download ios6.1.3

Front Facing Camera Refuses To Work Since Upgrade To Ios7

Since I have upgraded to ios 7, for what ever reason my front facing camera will not work. Regardless of this been tried on the camera App or Facetime. When I switch to it, it just blurs the screen and hangs. Nothing else happens. Is anyone else having this same problem since upgrading? And if so has anyone got a solution to this?
Many Thanks
Luke.

hello all,
I can confirm the same behaviour with an iPhone 4S, white, 64GB. We own 3 iPhone 4S in our family. 2 of them work flawlessly after the update to iOS7. The only visible difference is the white colour. With the white iPhone 4S we cannot use the front camera any longer. The camera app freezes, switch back to the rear side camera only works, after removing the camera app from the multitasking pane. Reinstalling with iTunes or via DFU mode or via settings-general-reset-contents&settings didn't help. A staff member of an Apple retail shop tried again, but again without success. We both agreed that it must be a software issue. All apps using the front camera (Facetime, Tango, Skype Camera+ etc.) do not work.
The front camera worked well before upgrading to iOS 7.
But 2 other iPhone 4S working without a problem even with the identical iOS 7 leads me to the question if Apple used different camera modells or even different suppliers for the front camera for production of the iPhone 4S. My only explanation from an engineering point of view is that there were different cameras used in production and one of it now has a problem to connect correctly to the iOS 7, which indicates in this case a driver problem.
2 possible solutions:
wait until Apple releases a new version of the iOS which hopefully also covers this problem.
let the front camera replace in a repair shop which will cost between 49 and 69 EUR (this morning I have investigated into some Internet shops offering this service)
Cheers, Claus

Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb. Any suggestions? Thanks. LL

My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB. Have had no previous issues with printing, scanning or faxing. When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the on my MAC which shows the same problem. All of the color and black cartridges are new.
The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
Any suggestions? Could this simply be a compatibility problem? I'd sure like to keep my Canon printer.
Thanks, LL

Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
Also an FYI - this is the Mavericks forum. The Yosemite forum is here

My morphie pack does not work since upgrading

My juice pack (Morphie) Does not work since i have upgraded the ios to 7.1.1
I have two iphones a 4s that has not been updated yet and also the 5s which has been updated. The 4s is working perfectly well with the juice pack but the 5s is absoultely crap to say the least. I complained to Morphie and to their credit the sent me a new pack and it has the same problem. This MEANS since the update there has been a change with apple and they have made our 100€ chargers redundant as I only get 20 - 25% extra battery when I should be getting a full charge
This is not acceptable for phones that are expensive and the accessories that we buy to go with them are also an additional expense and very expensieve to. That doesnt matter too much when they work, but then they dont it is NOT good.
Someone come back to us and give us a solution please.
Elena - a very loyal apple client with apple imacs in the office, mac book pros and air mac for sale staff along with ipad minis and iphones......... NOT A HAPPY CLIENT

3l3na t wrote:
Thanks guys for the responses but I am not convinced this is a MOPHIE problem. Their customer service department have been great and look after their clients. I have two iphone 4s´s which have not been upgraded for fear of being left with the rubbish battery I have with my relatively new iphone 5s. Mophie have replaced the amost new juice pack that I had with a completely new one that has the same problem...... funny how this has happened since the ios 7.1.1. update
I have been using MOPHIE juice packs for a number of years and have never experienced anything like this before. It seems rather strange that after upgrading I have this problem that APPLE negates to rectify.
Of course I wouldn´t have to use a 3rd party accessory if the battery was made to last and if APPLE had an alternative, I would of course buy apple but they don´t. I am a huge fan of Apple but cannot run a business with phones that cannot be upgraded for the fear of loosing battery life which would mean loosing clients which would mean loosing my lively hood.
Full phone restore was done too.
Still not HAPPY
Sorry, as already stated your using a 3rd party accessory take it up with mophie.
I have no issue with my mophie after updating to 7.1.1 - so your theory is flawed.
My battery life can last up to a day and a 1/2 - I only bought the mophie as a backup battery and because it is bulky and can protect my phone in case I drop it.

Signature field NOT working since upgrade to Adobe Pro X

Hi Forum,
Form stop working since upgraded to Pro X (ver 10) in Adobe. Getting this message:
IntegriSign
This plug-in is intended for validating signatuers signed using earlier versions of Acrobat. To sign using this version of Acrobat use "IntegriSign to Acrobat 9.0 and later" handler
I have changed settings in Adobe Pro X to the above but still get the same message.
Do anyone know how to fix this?
Thanks,
Patricia

Download directly from Apple and install over what you have now;
iTunes 12.0.1

Video/Camera light not working after upgrade to 975

Hi,
After I upgraded to the latest OS release from Verizon (v5.0.0.975) on my Tour, the light for both my video recorder or camera no longer work. I have done battery pulls and checked the options for each (both set to ON).
I tried searching here first, but didn't find anything. However, a Google search shows posts on other forums about this issue.
I contacted Verizon Support and the person was not able to help. She asked me to go into Options for my video camera and apparently some of the settings have also been removed. So, I asked her to please report this to RIM Support. She mentioned downgrading my OS, which I had already considered. But, since this OS seems stable and I don't use my cameras that much, I'll ride it out for now.
If anyone else is having the same problem, I would encourage you to contact your carriers support and report this. Hopefully RIM will have a fix for this available soon.
Thanks,
RayK

Try the troubleshooting tips here > How to Troubleshoot iSight
iSight is the built in camera.

System sounds do not work since upgrade to ML 10.8/10.8.1

Hello. Since I upgraded to Mountain Lion, I have the persistent problem of my system sounds not working, after my laptop sleeps. Fresh after a restart, they will work..then, after screen saver or sleep, they will not.
Here's what doesn't sound:
- Apple mail sounds (sending, receiving)
- alert sounds
- Sys Pref -> Sound -> any/all sound effect selection
- screen capture click
Here's what always works fine:
- the pop-pop-pop sound when I increase/decrease the volume
- iTunes
- any sound from audio/visual embedded in browsers
- sound from all 3rd party apps
Internal speakers are selected
No problem throwing out sound to airplay, etc.
No problem with non-system non-Mail sounds
All sounds work fine after a restart...but after a sleep or a screen saver, they will cease working until the next restart.
MacBook Air, 10.8.1 (also was noticed under 10.8)
1.7 GHz, 4 GB
I do see posts where people are experiencing the same, but no real solutions. I have found & trashed the prefs file (from other posting solution) but that did not solve this persistent issue. The sounds always DO work fresh after restart...just after sleeping, they do not. Thank you :-)

Yeah, just to keep everyone breathlessly updated: there has been no fix for me.
Amusingly (mostly not..) on the plane yesterday, when I plugged in my headphones, I was greeted with about 3 weeks' worth of Sent Mail and Alert tones. Good times.
The fix involving Audio MIDI Setup and momentarily changing the internal speakers integer dropdown list used to occasionally work for me...but lately it has not. I'm just making do with no mail sounds, like a chump. How I wish GrowlMail worked with 10.8 because I could get my sounds that way.

Re: Satellite L300 - camera is not working after upgrading to Win7

As in subject. Camera wont work after upgrading to Windows 7. I have tried almost everything found on Internet. The drivers are installed.
There is no exclamation mark in system.
Satellite L300 (PSLB8E)

Hi
What happen when you start the webcam application?
All Programs -> Toshiba -> webcam
Did you install some other 3rd party software like for example Skype which would access the webcam?
Additional tip: go to BIOS and set it to default, save the changes and then reboot the notebook.
Start for example Skype, check the Skype settings if webcam has been chosen properly.
Would be really interesting to know if other software would be able to use the webcam.
By the way: did you install the Toshiba Face Recognition? This software use and access the webcam as well
So sometimes it could be possible that this software would block the webcam and the webcam tool could not work

Mega pc 651 not working since upgrading to xp

I have recently upgraded my pc to windows xp and since then my tv tuner is not working. Not knowing much about drivers etc, can anyone tell me what drivers I should be using and where to download them from. I also don't have my original msipvs & win dvd cd so cannot load this back on. I have found the download for this but it asks for the serial number from the original cd - WHICH I DO NOT HAVE....can anyone help please?

download the TV@nywhere Master drivers, and read through the sticky topic on the same card, the serial number is found there

Wifi syncing not working since upgrading to iOS 6

Has anyone had an issue with and found a solution to wifi syncing after upgrading to iOS 6? I have not been able to get either my iPhone 4 or 3d gen iPad to sync since upgrading last week. I have the latest version of iTunes. I've tried disabling wifi syncing and the closing/restarting iTunes. I've tried turning my iMac's wifi off and on. The devices show, but will not automatically wifi sync.
Thanks in advance!

I have a variation on that problem. I upgraded my iPhone 4s and my new iPad to iOS6. No problems synching the new iPad to iTunes wirelessly. My iPhone will not sync wirelessly unless I turn it off, then on again. However, if the phone goes out of wireless range, then returns, it will no longer sync wirelessly to iTunes. Otherwise, the wireless connection appears to be working, e.g., I can connect to the internet.

Gmail push not working since upgrading to 4.0

I have not been able to get my email to push since upgrading to 4.0. I have a 3GS and it worked great until the upgrade. Still have it set to push. Tried deleting itunes completely and then restore of iphone. Still no go. Please help.

I have this problem also. It's really persistent and quite annoying. My Mail is silent like a rock on my iPhone 3gs; it's not pushing email notifications at all. To get new emails, I have to open Mail repeatedly, which defies the very definition of "notification" and "push" I really dislike the 4.0 update. I wish I never upgraded to it because everything was perfectly fine prior to the upgrade...

NAC CAM HA not working since upgrade to 4.8

Similar Messages

Maybe you are looking for