NAC controlled port don't return to authentication vlan

Hi All,
I have NAC version 4.7.1 and i have implmented it as out of band virtual gateway and when i make the port NAC controlled and try to test it works properly but when i remove the pc from the port, the port doesn't go back to authentication vlan.
if i put the same pc in another NAC controlled port it doesn't require authentication and it changes itself directly to authenticated.
the port remains authenticated until i clear the certified list.
can anyone help me to make nac change the port to unauthenticated once i remove the port.
Best regards,
Ayman Yehia

Ayman,
Sorry for the delay. Two things to check here. First, are you able to control the switch from your CAM successfully? In other words can you set the initial vlans successfully?
Second, what are you using for your switches? MAC-Notifications or Linkup-Linkdown notifications? Can you check the CAM logs as to what shows up there when you put a new PC in an authenticated port? Does it get a trap? What does it do with that trap?
Post your CAM logs with such an attempt where it didn't work, along with the MAC and IP information of the client. Also post the screen shots of your CAS configuration, specifically the managed subnet page, vlan mapping page, and network information page.
Thanks
Faisal

Similar Messages

  • MacBook Pro 2.3 os 10.6.8 control-C and Control-v don't work

    On MacBook Pro 2.3 OS 10.6.8, control-c and control-v don't work in any app Please help

    If you mean copy and paste, that's Command c and Command v, not control key.

  • M30 - Front Mode and Audio/Video Control buttons don't work

    Hi
    The Front Mode and Audio/Video Control Buttons Don't Work
    Any ideas?
    Thanks

    Hi
    As far as I know the Toshiba Controls utility is responsible for key usage.
    Did you try to install Toshiba Controls?
    Check the Toshiba driver page for this driver.
    Bye

  • My screen brightness control buttons don't work windows 8

    my screen brightness control buttons don't work?
    the light in the mute button is always on when NOT on mute?
    Have set up Win8 3 TIMES but get always same bug agan 
    Hope someone can help 

    Hello smarisig. I understand you are not able to control screen brightness from the keyboard on Windows 8. By chance, did you upgrade to Windows 8 from Windows 7? I have located an online forum that contains troubleshooting on this issue: http://thedailybuggle.com/forum/unable-control-screen-brightness-windows-8-a-200.html
    The person who posted the issue on this forum had upgraded from Windows 7 to Windows 8, and then this issue occurred. That is the reason I asked if this Windows 8 was upgraded. Regardless, follow the troubleshooting presented and it could resolve the issue for you. If not, let me know and I will continue to research the issue in the meantime. I'm only here to help!
    Mario
    I worked on behalf of HP.

  • How much $$$ will Verizon charge me if I don't return the Fascinate after receiving replacement?

    How much $$$ will Verizon charge me if I don't return the Fascinate after receiving replacement?
    I spoke with customer service and couldn't get a real number.  She just said it "could be up to $500, or more"
    to be determined after they don't receive it within the 5-day period.
    Is there a way to find out for sure how much it's going to cost?
    Thanks!
    Here's the reason I'm asking:
    I forgot to drop it off at FedEx on the way to the airport.  My entire family is now on an overseas trip and won't
    be back for 8 weeks.   The Fascinate, packed in Verizon box with FedEx box, is now sitting in my car trunk at
    the airport long-term parking lot.  I was supposed to stop by the FedEx office at the airport cargo area to drop
    it off, but forgot about it during the rush....   (yes, I do realize it's a stupid mistake that may end up costing a
    lot of money)

    Hi and good morning!
    I would like to review your account with you and ensure I can help resolve any concerns you have about being charged for this device. Please PM me directly so we can discuss this together. Also, include your name and mobile number with your PM to me.
    Thank you so much and have a safe overseas trip!

  • After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

    hello,
    after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
    the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
    The only "solution" is to restart my Mac.
    - SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

    I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
    My solution:
    Cold start with Command-v pressed.
    This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
    What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
    Maybe Cmd-v set open firmware params and fixed some corruption.
    Anyway: my mac mini works again.

  • USB ports don't work - 880GMS

    http://
    HELP ME
    My usb ports work fine until Sunday, I restart the W8 OS and they don't work (my last activity was configure a router but I didn't install anything). I've two OS (W8 and Ubuntu 11.1) and I tried all and my USB ports don't work. I don't have any idea about the cause of the problem. All work fine except my USB ports. They are enable according to the BIOS but the OS (W8, W7 or Ubuntu) doesn't recognize any device.
    I tried this things:
    - Change my porwer supply
    - Restart the BIOS to the Fail-Safe and Optimal value default
    - Clear the CMOS (Changing the jumper and remove the battery)
    - Remove the W8 and install W7
    - Remove W7 and install Ubuntu 11.04
    - Flash the BIOS to the last update (it's the same that was loaded in the BIOS)
    Currently, I don't know what I must do it. I'm really disappointed with this board (MSI 880GMS-E35). This is my second problem with these model. Previously, I've one and it didn't supply the energy to start the proccesor (Phenon X4 955). My actual board works fine until Sunday.
    Please help me to solve the problem.

    OK, I have no idea but fortunately my usb ports work fine now.
    I don't know how to fix the problem. But I can assure that thanks to Ubuntu it's fixed. My last two operations were:
    - Flash the BIOS
    - Check lsusb
    Yesterday, I'm full disappointed and I was going to prepare my hard discussion with my provider when suddenly I found a this post:
    http://askubuntu.com/questions/69594/my-usb-ports-randomly-stop-working-till-a-reboot
    But before to enter the command in the Ubuntu's console, I saw that my USB devices work. It's amazing!!! I'm a newer electronic engineer and I saw events similar that this more than once time in my labs (Typical student experiences).
    If anyone has the same problem, I could recommend:
    - Check BIOS usb options
    If these are ok, else enable the propertly options
    - Check # lsusb (In Linux)
    If your ports don't appear check the PSU (Maybe there are others things that you should check) else
    - Check # dmesg | tail (Before and after to connect a usb device)
    If there is an error saw in forums, maybe it's the common problem so far (Incompatibility in the kernel -error hci-)
    - Type # acpi = force irqpoll
    ELSE
    - Flash the bios as show in this forum
    ACLARATION: I think that this algorithm might help you but I don't prove this. It's your responsible to do that. I only write the items that I learn with this issue.
    CONCLUSION: I don't wish that anyone has this problem. I lost one week trying to solve it.
    POST RELATED TO USB DON'T WORK CAUSE PROBLEM (ABOUT dmesg and interpretation)
    https://bbs.archlinux.org/viewtopic.php?id=102553
    POST RELATED TO FLASH THE BIOS
    https://forum-en.msi.com/index.php?PHPSESSID=0uaa1psa1gln707een5uu6sb16&topic=138659.0

  • Return it or don't return it - faulty cable

    I've had a cable swapped out (for the 2nd time) as it burned out. The Apple site says I must return the faulty cable or I'll get charged. They've also given a returns label.
    However, inside the package I received is a piece of paper that says 'Don't return this hardware', or something like that.
    Why? And what should I do? I guess I can't do anything with the faulty cable, but it seems to me that if there's some fundamental problem with the electronics on my iPod causing burn-outs, I'd like to hold on to some of the evidence since I'm going to be annoyed when warranty lapses and they charge me every time it burns out.
    iPod 20Gb   Windows XP  

    They don't always want back the faulty parts.
    The note probably does say to not return ANY parts.
    I had my headphones replaced and it said NOT to return any faulty parts that were replaced.
    They started asking for them back to keep people from simply getting "spares" when there was really nothing wrong in the first place.

  • Every time I plug in my headphones into my Macbook Pro, my volume control buttons don't work.

    Every time I plug in my headphones into my Macbook Pro, my volume control buttons don't work. Even after I unplug my headphones they don't work, they get stuck on the level of volume it was at when I plugged in the headphones. I can control the volume if I go to system preferences and do it that way, but that is such a pain. Also, in order to get the buttons to work again I have to completely restart my computer which is also a pain! What should I do, or can do, to fix the problem?

    If you have have  lion system, herebis a digital/analong output, youmcan a tooth/Qip with the the tip cut off you can  you can stirrted s very gently to the input/put is a digital/along output devivce\\\\\\\\\\\\\
    The dual input/digital input
    a annaolg/digidal, an toothpick/Qtip with the cutit off gentely wiggle  the the the input/put should then looen the the right the, should loosen the sticky switch to the lne.

  • Ways to control ports in AEBS

    I know this topic has been visited many times but I have not found an answer to my question.
    Other than port forwarding, is there a way to control ports on an AEBS? Specifically switching a port from closed to stealth?
    I know that NAT protects the computer. I am not suffering from "Ping Paranoia"
    The reason I ask the question is when I performed a port scan I found most ports closed, none open, but a few were stealth. I am trying to learn why this is the case and how this operates 'in' the AEBS. Thank you kindly.

    Although not documented, I believe (from reports on this topic by others that the Airport Extreme Base Station does not "stealth" any of its ports. A port scan will simply indicate they are "closed". There is no ability to change ports from "closed" to "stealth" on an Airport Base Station individually or altogether.

  • I have the new iMac with OS X 10.8.3 i want to conner it with apple remote control i don't know how

    i have the new iMac with OS X 10.8.3 i want to conner it with apple remote control i don't know how

    I have a Mac Book Pro 2008
    I have my MBP paired with Apple TV  and use it all the time
    My only complaint is that when I use the Apple TV remote it sometimes turns things off and on in iTunes.
    Besides all the options from Apple TV I can listen to anything on my mac over my TV surround system thru Apple TV

  • SAPWL_WORKLOAD_GET_STATISTIC don't return data

    Hi,
    I tried using the function module
    SAPWL_WORKLOAD_GET_STATISTIC
       PERIODTYPE = D
       STARTDATE = 20150423
       ONLY_APPLICATION_STATISTIC = X
       INSTANCE = TOTAL
    I tested all the export table but always  this function module don't return data
    Thank you in advance for the Help.
    akrem

    hi Paul
    thanks for your response but i tested it with today's date but also don't return data
    akrem

  • SCCM 2012 R2 - remote control port[s] - customize/configure/change?

    First, let me start by saying I am aware of
    this page that outlines the ports used in SCCM. It has a section called "configurable ports" and another called "non-configurable ports". However, remote control (port 2701) isn't listed under either - its under another section.
    Currently, we have another app utilizing the same port[s] that the SCCM remote control piece uses. I want to know if there is any way to configure this to use a different port? Somewhere in the registry perhaps? From what I've read it doesn't sound like
    it is changeable but I wanted to confirm in here.
    Our other app is configurable, however, it would require us to not only change it on each of the 100 or so Windows servers, but over 900 Unix servers as well that are configured to use the same port. So it will be a little bit of work. The other
    option (as I have it set up now) is to just leave remote control disabled. 
    Thanks in advance!

    Is 2701 the default port for this application or is this just bad luck? If it is the default port would you mind sharing which app this is for our information.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Tranport control program ended with return code 0012

    Hi,
    When i realesed the associate transport request it went very well. Then when i try to run orginal transport request number it iam getting message as tranport control program ended with return code 0012.
    Regards,
    Asif

    Hi Asif,
    There can be many reasons behind that, check the logs file in \usr\sap\trans\log
    Check whether you have free space or not.  Check in for permission for request in data and cofiles folder.
    Check background jobs related to transport.
    Cheers
    Deepanshu

  • Transport control program ended with return code 208

    hi all please give me the solution for the transport control program ended with return code 208
    after the request released

    Hi,
    Please check the transport log at OS level. below is the path
    /usr/sap/trans/log.
    You can also check from SAP level. After the transport is import go log button in the STMS_IMPORT tcode  >>> expand all the possible values... you can find the exact reason why the transport ended with error.
    And also plesae check if nay entry exits in TRBAT table .
    Thanks,
    Phani.

Maybe you are looking for