Nac Guest Server: SMS Optional fields and special variables
I want to include the sponsor email address in the SMS body. Is there a way to do it?
I also notice there are 5 optional fields, how do we use that fields? Cisco doco doesnt mention much about the 5 additional fields.
Cheers,
Would this help?
http://www.cisco.com/en/US/docs/security/nac/guestserver/configuration_guide/20/g_hotspots.html#wp1071198
Sent from Cisco Technical Support iPhone App
Similar Messages
-
NAC guest server and guest proxy filtering issue.
Hi all
Continuing our issues log for the NAC guest server install, our toplogy and issue is as follows:
We have a guest NAC server and a 4404 anchor controller successfully deployed in the DMZ, the anchor WLC has a mobilty anchor which is a WISM on the corporate network, DHCP services for guest clients are issued with no problems from the WLC in the DMZ. The first port of the DMZ controller is located on the DMZ and the second port directly connects to the firewall interface.
All works correctly, DNS, DHCP, NTP, SNMP etc all work fine through the firewall.
What options do I have to filter Internet access in this scenario, we have Websense and Nokia firewalls, don't think I can use WCCP as I have nowhere to place it, the second connection on the WLC is directly connected to the firewal so nowhere to intercept the traffic, our security team has tried some tricks on the Nokia to try to redirect the traffic on the firewall using a type of redirect, WPAD, I can't see as an option. Any ideas. If I place the second interface into the DMZ, could I use WCCP that way maybe, but won't traffic still have to go to the firewall??
options please ??Well you will need to use a 3rd party certificate.. Here is a link to generate and install a 3rd party certificate on the WLC for the use with Web-Auth:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml
Here is a link for the NGS:
http://tools.cisco.com/search/display?url=http%3A%2F%2Fwww.cisco.com%2Fen%2FUS%2Fdocs%2Fsecurity%2Fnac%2Fappliance%2Fconfiguration_guide%2F410%2Fcas%2Fcas41ug.pdf&pos=1&strqueryid=2&websessionid=RK88fQNWy8TCDUakpNGLOqZ
The applicances are using a self generated Cisco certificate which of course is not a trusted certificate store in most of all operating systems. So using a 3rd party certificate like RapidSSL, Verisign, etc will eliminate the certificate issue. -
NAC Guest Server SMTP Authentication
Does anyone know if you are able to set your SMTP server in the NAC Guest Server to do SMTP Authentication? Our old Exchange server just let us specify the SMTP server and send the guest accounts their Username and Password to their outside accounts. Our new Exchange server requires SMTP authentication, but we do not see the option available in the NAC Guest Server interface. We are running NAC Guest Server 1.1.3. Any ideas would be appreciated. Thanks!
I have Cisco NAC Guester server 2.0.2 and have sort of similar issues.
I configured the Base DN to the OU of the sponsor groups in AD and then map that particular group in roles. Users from that group can log on fine and create guest accounts.
The problem is, it seems that other users from that OU seems to be able to log on as sponsors too. How do I restrcit this to just that sponsore group? I tried changing the Base DN to the OU of the sponsore group then enter CN=sponsorgroup to narrow it to just that group but still other users can log in as sponsors. -
NAC guest server and pre-configured duration of accounts
There seems to be a bug in the way the NAC guest server handles the pre-configured duration of guest accounts.
I have followed the manual and I did:
- Configured 3 durations (24h, 48h and 1 week) under the templates/accounts/accounts durations.
- And set "maximun duration of account" under User Groups
As I understand I should now be able to select one of the three configured durations when I login as a sponsor.
However I only get the number which I specified under User Group.
The odd thing is that if I change the Maximum duration under User Group, I get this as the only choice (e.g. 14 days).
Have other experienced this?
Best regards,
Steffen LindemannYou can use any one of the option ie number of days or number of hours.
For days;
Authentication > User Groups > Add Group | Edit Group includes two new settings for Number of days in the future the account can be created and Maximum duration of account (in days)
For hours:
User Interface > Templates > Add Template | Edit Template > Accounts > Account Duration
http://www.cisco.com/en/US/docs/security/nac/guestserver/release_notes/11/gsrn110.html -
Just wanted to know if this will work or not...
I was looking at a design from a client and they had two CAM and CAS plus a Guest server. My client wants to use the equipment above for guest access. The problem I'm having is that I'm building a wireless network with guest anchor WLC's in the DMZ. So my wireless users will be tunneled to the DMZ controller. Also, the WLC can have a splash page uploaded to it and also authenticate users locally in the DB. They don't want any remediation, just authentication.... is this a waste of money or would would actually implement this?I've some (very) basic questions.
Let's say guest vlan = x
1)vlan x should be created on the foreign controllers as on the anchor controller, with the same properties
2)on the anchor controller a dynamic interface has to be created acting as default gateway for the guest clients.
3)it's advised to place the guest server in the guest vlan? Eg. Somewhere in the server farm?
4)Once traffic coming from the guests is arrived at the anchor controller. (I know to less of WLC ;)) Will it forwarded with as source IP, the IP of the anchor controller towards the anchor default gateway (firewall or internet router?)
4)authentication: user connect to SSID guest and opens a browser. The user is redirected and a login page is displayed. Is this page downloaded from the anchor controller? I think it is and pushed via WCS. So Guest NAC server has nothing to deal with this page? Correct?
The anchor controller polls the nac guest server with the given credentials. Anchor controller forwards the credentials to the NAC guest server. The NGS replies with authenticated or not. If authenticated. The guest can browse. Probably on regular base, the anchor controller will poll the NAC guest in order to check if he's still authenticated and if enabled pass information to the NAC guest for accounting. Is this somehow ok?
I've found to open the following ports in the firewall:
UDP 97 for EoIP
UDP 16666 for intercontroller traffic
and 1812/1813 for Radius.
Thanks in advance -
NAC guest server hangs and guest portal is not working
Hi all ,
Our guest nac server NAC3315 is oftenly getting hung state . And our guest wireless network is not working . We are able to ping the NAC server but web page is not opening for the clients if they connected to guest network.
Any clue on this ....
Thanks!,
Regards,
Vijay.All actions within the Cisco NAC Guest Server are logged into the database. This enables you to see any action that occurred as part of the normal operating process of the application.
To access the system log from the administration interface select Server > System Log from the left hand menu
Please check the Error Logs for troubleshooting of NGS -
NAC Guest Server and Multiple Guest SSID's/Splashpages
Hi All,
If I have multiple guest SSID's on a single controller and I use NGS as the Radius. How do I configure NGS to "send" the clients to differnet login pages corresponding to the SSID they came from.
I can configure different splash pages in HotSpots section but how do I map the different SSID's from the controller to the different splash pages. Then I guess that raises the question when I generate guest users on NGS is it possile to only allow them associate to a specific SSID.
TIA,
Eoin.Hi Nicolas,
Thanks for the reply. I can see that config on the WLC and have used it before where there is only a single guest SSID. What I dont know is if the NAC Guest server sees radius requests coming from different guest SSID's on the same WLC. How does the NAC Guest server apply the correct guest policy to that user. And when sponsors genereate guest accounts how do they specific which policy is to be applied to that guest so it can only get access to a specfic guest network/SSID I'm not sure where the "mapping" of accounts/splash pages/policies takes place on the NAC guest server. I've only ever set up NAC Guest when there has been a single guest SSID.
Regards,
Eoin. -
NAC Guest Server and WLC, WCS
I have setup a NAC Guest Server to allow users to sign up guest account via Active Directory. How do I tight this into WLC or WCS?
Hi
Try this:
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00809d6b9a.shtml
Regards
Greg -
NAC guest server with RADIUS authentication for guests issue.
Hi all,
We have just finally successfully installed our Cisco NAC guest server. We have version 2 of the server and basically the topology consists of a wism at the core of the network and a 4402 controller at the dmz, then out the firewall, no issues with that. We do however have a few problems, how can we provide access through a proxy without using pak files obviously, and is there a way to specify different proxies for different guest traffic, based on IP or a radius attribute etc.
The second problem is more serious; refer to the documentation below from the configuration guide for guest nac server v2. It states that hotspots can be used and the Authentication option would allow radius authentication for guests, I’ve been told otherwise by Cisco and they say it can’t be done, has anyone got radius authentication working for guests.
https://www.cisco.com/en/US/docs/security/nac/guestserver/configuration_guide/20/g_hotspots.html
-----START QUOTE-----
Step 7 From the Operation mode dropdown menu, you can select one of the following methods of operation:
•Payment Provider—This option allows your page to integrate with a payment providing billing system. You need to select a predefined Payment Provider from the dropdown. (Refer to Configuring Payment Providers for details.) Select the relevant payment provider and proceed to Step 8.
•Self Service—This option allows guest self service. After selection proceed to Step 8.
•Authentication—This option allows RADIUS authentication for guests. Proceed to Step 9.
----- END QUOTE-----
Your help is much appreciated on this, I’ve been looking forward to this project for a long time and it’s a bit of an anti climax that I can’t authenticate guests with radius (We use ACS and I was hoping to hook radius into an ODBC database we have setup called open galaxy)
Regards
Kevin WoodhouseWell I will try to answer your 2nd questions.... will it work... yes. It is like any other radius server (high end:)) But why would you do this for guest.... there is no reason to open up a port on your FW and to add guest accounts to and worse... add them in AD. Your guest anchor can supply a web-auth, is able to have a lobby admin account to create guest acounts and if you look at it, it leaves everything in the DMZ.
Now if you are looking at the self service.... what does that really give you.... you won't be able to controll who gets on, people will use bogus info and last but not least.... I have never gotten that to work right. Had the BU send me codes that never worked, but again... that was like a year ago and maybe they fixed that. That is my opinion. -
NAC Guest Server, unable to login with sponsor
We have a Cisco NAC Guest Server (version 2.0.5).
I created some sponsors and wanted them to be in another sponsor user group than the default group. So I created a sponsor user group and changed the group permissions (Allow Login is set to Yes, edit account .. are set to Own Accounts).
No I wanted to try out the new sponsors but I can't login to the NAC Server. I get a "username or password invalid" as reply. If I change the sponsor user group of the user to DEFAULT, everything is working.
The logfile on the NAC Server shows the following error:
Oct 4 13:05:14 s100059 NGS_SPONSOR: [audit NGS 0 10.106.161.5] Login failure: xxx
xxx is the username of the sponsor.
Why can't I login with the sponsor when he's in anoter sponsor group than DEFAULT?
MartinIf credentials work on CCMuser CUPSuser I would suspect either some kind of communication problem between the clients and the servers and/or misconfiguration (user/device/line association, device owner, roles, CTI/CCMCIP profiles, etc) on CUCM/CUPS.
Specially because you mention the same happens with CUPC.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk -
Has anybody implemented NAC guest server in conjunction with SMS tokens.
Is there some docs. on how to?The following APIs allow administrators to create, delete, and view local user accounts on the CAM:
â¢getlocaluserlist
â¢addlocaluser
â¢deletelocaluser
Local users are those internally validated by the CAM as opposed to an external authentication server. These APIs are intended to support guest access for dynamic token user access generation, providing the ability to:
â¢Use a webpage to access Cisco NAC Appliance API to insert a visitor username/password combination, such as [email protected]/jdoe112805, and then assign a role, such as guest1day.
â¢Delete all guest users associated with the guest access role for that day.
â¢List all usernames associated with the guest access role.
These APIs support most implementations of guest user access dynamic token/password generation and allow the removal of those users for a guest role.
You must create the front-end generation password/token. For accounting purposes, Cisco NAC Appliance provides RADIUS accounting functionality only.
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/413/cam/m_apiapx.html#wp1012025 -
Cisco NAC Guest Server for Wireless Users integration with IP telephony
Hi Team
I have a client who has the following requirement. The cleint requires a Guest server inorder to serve wireless needs for guests at their office. They want the guest to get their authentication codes via SMS. The cleint will have a lobby IP Phone where the guest will press the services button confgiured on the IP Phone. IT will then prompt the guest to enter his mobile number. Once the guest enters his mobile number, the guest will recieve a text via sms gateway with login credentials. They want to offload this from the receptionist and it is for this reason that they require this functionality.
Has anyone done this sort of deployment ? We have already proposed NAC guest server and Wireless controller but we do not know whether the XML application for subscribing the service on the IP Phone is available directly with cisco or does it need to developed.
Kindly advice on the same.
Regards
AzeemHi Vishal,
Please note that if you want to return ACLs (and usually in wired web auth you need to), you will have to integrate with ACS as NGS itself cannot return ACLs in the reply radius attributes.
Basically the process is as follows:
1 - Client plugs cable on switch.
2 - Web auth is triggered on the port.
3 - default ACL permiting only DNS and DHCP is applyed so that the client PC can obtain IP address and open a browser.
4 - Client will be redirected to the NGS hotspot login page.
5 - Client will enter credentials.
6 - Client broswer will send an HTTP POST packet containing the credentials.
7 - The switch will intercept the POS packets and retrieve the credentials entered.
8 - The switch will send Radius Access-Request to the ACS.
9 - The ACS will use the NGS as External Identity source to authenticate the client.
10 - The NGS will reply with Radius Access-Accept to the ACS and the ACS will reply to the switch including the ACL in the Access-Accept.
11 - the Switch authorizes the client on the port and applies the ACL it received from the ACS.
Please follow the document Nicolas posted as it is a good one.
HTH,
Thanks -
NAC Guest Server, How to change the password for a single user?
We have a NAC Guest Server which creates a complex password for all new users created.
We would like to have normal/simple password for a single user. How can I get this done on a NAC Guest Server.
Thanks in advance.Hi,
You can setup 3 different flavours of passwords:
http://www.cisco.com/en/US/docs/security/nac/guestserver/configuration_guide/20/g_guestpol.html#wp1063249.
a. Username Policy 1 - Email address as username
Use the guest's email address as the username. If an overlapping account with the same email address exists, a random number is added to the end of the email address to make the username unique. Overlapping accounts are accounts that have the same email address and are valid for an overlapping period of time.
b. Username Policy 2 - Create username based on first and last names
Create a username based on combining the first name and last name of the guest. You can set a Minimum username length for this username from 1 to 20 characters (default is 10). User names shorter than the minimum length are padded up to the minimum specified length with a random number.
c. Username Policy 3 - Create random username
Create a username based upon a random mixture of Alphabetic, Numeric or Other characters. Type the characters to include to generate the random characters and the number to use from each set of characters.
Note: The total length of the username is determined by the total number of characters included.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
Guest Wireless Users Not Able to Get to NAC Guest Server
First of all, I appreciate any of the help that can be offered on the post. Your solutions and suggestions have been valuable, in the past!
Here's the scenario. I have two internal WLC's, and one anchor mobility server, in the DMZ. The internal controllers are part of the 10.x.x.x range, while the DMZ WLC is in the 192.168.1.x range. We also have a NAC Guest Server, in the DMZ that has a 192.168.1.x address. Here's the problem, when a guest user uses our guest SSID, they're assigned a 172.16.x.x address, their traffic is intercepted, and they're presented with a login page. If they don't have login credentials, there's a "Register Here" link that takes them to the NAC Guest Server to self-register. When they click the "Register Here" link, for some reason they can't get to the NAC guest server. If I bring up a command prompt, and type in "telnet 192.168.1.x 80", it connects. The odd thing is that when I was testing, if I login with guest credentials, and then try to go to the NAC Guest Server self-service page, I can get to it with no problem. Would anyone have any ideas as to why?I may have missed something here, but isn't the point of the guest portal that you can't get anywhere on the network (except the guest portal) until you have authenticated?
-
Wired WebAuth only with NAC Guest Server (No ACS)
Ok, I have been fighting this for two days now. I want to use the webauth function on some of our Cisco 3750Gs ver
12.2(55)SE5 for guest access. I'm trying to use our NAC Guest Server ver: 2.0.3 as the backend portal and Radius server. We do not have ACS or any of the other components of ISE or NAC. I think the issue is the NGS server is not sending the d(ACL) back to switch. Guest work work fine from our WLCs.
switch debug: No Attributes in swtich debug
Mar 22 12:56:00.448 CDT: RADIUS(0000030C): Config NAS IP: 199.46.201.26
Mar 22 12:56:00.448 CDT: RADIUS/ENCODE(0000030C): acct_session_id: 1012
Mar 22 12:56:00.448 CDT: RADIUS(0000030C): sending
Mar 22 12:56:00.448 CDT: RADIUS(0000030C): Send Access-Request to 10.199.33.20:1812 id 1645/19, len 177
Mar 22 12:56:00.448 CDT: RADIUS: authenticator 99 95 59 55 09 A9 D9 E1 - 2B 01 90 36 1B 8A 41 92
Mar 22 12:56:00.448 CDT: RADIUS: User-Name [1] 20 "[email protected]"
Mar 22 12:56:00.448 CDT: RADIUS: User-Password [2] 18 *
Mar 22 12:56:00.448 CDT: RADIUS: Framed-IP-Address [8] 6 199.46.201.231
Mar 22 12:56:00.448 CDT: RADIUS: Service-Type [6] 6 Outbound [5]
Mar 22 12:56:00.448 CDT: RADIUS: Message-Authenticato[80] 18
Mar 22 12:56:00.448 CDT: RADIUS: A2 57 B5 F2 A6 FB 46 71 D0 EA 26 54 95 90 F4 D0 [ WFq&T]
Mar 22 12:56:00.448 CDT: RADIUS: Vendor, Cisco [26] 49
Mar 22 12:56:00.448 CDT: RADIUS: Cisco AVpair [1] 43 "audit-session-id=C72EC91A000002FC0A6CD698"
Mar 22 12:56:00.448 CDT: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
Mar 22 12:56:00.448 CDT: RADIUS: NAS-Port [5] 6 50106
Mar 22 12:56:00.448 CDT: RADIUS: NAS-Port-Id [87] 22 "GigabitEthernet1/0/6"
Mar 22 12:56:00.448 CDT: RADIUS: NAS-IP-Address [4] 6 199.46.201.26
Mar 22 12:56:00.448 CDT: RADIUS(0000030C): Started 5 sec timeout
Mar 22 12:56:01.454 CDT: RADIUS: Received from id 1645/19 10.199.33.20:1812, Access-Reject, len 20
Mar 22 12:56:01.454 CDT: RADIUS: authenticator 92 98 05 84 6E 4B CF DD - B5 D7 90 25 10 59 7B E7
Mar 22 12:56:01.454 CDT: RADIUS(0000030C): Received from id 1645/19
NGS log:
rad_recv: Access-Request packet from host 199.46.201.26 port 1645, id=19, length=177
User-Name = "[email protected]"
User-Password = "5rRmpPt9"
Framed-IP-Address = 199.46.201.231
Service-Type = Outbound-User
Message-Authenticator = 0xa257b5f2a6fb4671d0ea26549590f4d0
Cisco-AVPair = "audit-session-id=C72EC91A000002FC0A6CD698"
NAS-Port-Type = Ethernet
NAS-Port = 50106
NAS-Port-Id = "GigabitEthernet1/0/6"
NAS-IP-Address = 199.46.201.26
+- entering group authorize {...}
[radius-user-auth] expand: %{User-Name} -> [email protected]
[radius-user-auth] expand: %{User-Password} -> 5rRmpPt9
[radius-user-auth] expand: %{NAS-IP-Address} -> 199.46.201.26
[radius-user-auth] expand: %{Calling-Station-Id} ->
Exec-Program output: Note: no attributes here
Exec-Program: returned: 1
++[radius-user-auth] returns reject
Delaying reject of request 12 for 1 seconds
Going to the next request
Waking up in 0.6 seconds.
Similar debug from NGS but auth request from WLC: See attributes are sent to wlc although not needed
rad_recv: Access-Request packet from host 10.100.16.100 port 32770, id=22, length=152
User-Name = "[email protected]"
User-Password = "5rRmpPt9"
Service-Type = Login-User
NAS-IP-Address = 10.100.16.100
NAS-Port = 13
NAS-Identifier = "ICTWLC01"
NAS-Port-Type = Ethernet
Airespace-Wlan-Id = 514
Calling-Station-Id = "10.198.12.211"
Called-Station-Id = "10.100.16.100"
Message-Authenticator = 0xc9383e767f0c228a2b8a0ece7069f366
+- entering group authorize {...}
[radius-user-auth] expand: %{User-Name} -> [email protected]
[radius-user-auth] expand: %{User-Password} -> 5rRmpPt9
[radius-user-auth] expand: %{NAS-IP-Address} -> 10.100.16.100
[radius-user-auth] expand: %{Calling-Station-Id} -> 10.198.12.211
Exec-Program output: Session-Timeout := 20002004, cisco-AVPair += priv-lvl=15, cisco-AVPair += auth-proxy:proxyacl#1=permit ip any any
Exec-Program-Wait: plaintext: Session-Timeout := 20002004, cisco-AVPair += priv-lvl=15, cisco-AVPair += auth-proxy:proxyacl#1=permit ip any any
Exec-Program: returned: 0
++[radius-user-auth] returns ok
[files] users: Matched entry DEFAULT at line 1
++[files] returns ok
Found Auth-Type = Accept
Auth-Type = Accept, accepting the user
+- entering group post-auth {...}
[sql] expand: %{User-Name} -> [email protected]
[sql] sql_set_user escaped user --> '[email protected]'
[sql] expand: %{User-Password} -> 5rRmpPt9
[sql] expand: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ('%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', NOW()) -> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ('[email protected]', '5rRmpPt9', 'Access-Accept', NOW())
rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ('[email protected]', '5rRmpPt9', 'Access-Accept', NOW())
rlm_sql (sql): Reserving sql socket id: 12
rlm_sql_postgresql: Status: PGRES_COMMAND_OK
rlm_sql_postgresql: query affected rows = 1
rlm_sql (sql): Released sql socket id: 12
++[sql] returns ok
Sending Access-Accept of id 22 to 10.100.16.100 port 32770
Finished request 4.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Accounting-Request packet from host 10.100.16.100 port 32770, id=30, length=170
config:
aaa new-model
aaa authentication login default group radius
aaa authentication login console group tacacs+ line
aaa authentication enable default group tacacs+ enable
aaa authorization console
aaa authorization exec default group tacacs+ none
aaa authorization auth-proxy default group radius
aaa accounting auth-proxy default start-stop group radius
aaa accounting exec default stop-only group tacacs+
aaa accounting commands 15 default stop-only group tacacs+
ip device tracking
ip auth-proxy auth-proxy-banner http ^C HawkerBeechcraft Guest Network ^C
ip auth-proxy proxy http login expired page file flash:expired.html
ip auth-proxy proxy http login page file flash:login.html
ip auth-proxy proxy http success page file flash:success.html
ip auth-proxy proxy http failure page file flash:failed.html
ip admission auth-proxy-banner http ^C HawkerBeechcraft Guest Network ^C
ip admission proxy http login expired page file flash:expired.html
ip admission proxy http login page file flash:login.html
ip admission proxy http success page file flash:success.html
ip admission proxy http failure page file flash:failed.html
ip admission name web-auth-guest proxy http inactivity-time 60
dot1x system-auth-control
identity policy FAILOPEN
access-group PERMIT
interface GigabitEthernet1/0/6
switchport access vlan 301
switchport mode access
ip access-group pre-webauth-guest in
no logging event link-status
srr-queue bandwidth share 10 10 60 20
queue-set 2
priority-queue out
mls qos trust device cisco-phone
mls qos trust dscp
no snmp trap link-status
auto qos voip cisco-phone
spanning-tree portfast
spanning-tree bpduguard enable
service-policy input AutoQoS-Police-CiscoPhone
ip admission web-auth-guest
ip http server
ip http secure-server
ip access-list extended PERMIT
permit ip any any
ip access-list extended pre-webauth-guest
permit udp any any eq bootps
permit udp any any eq domain
permit tcp any host 10.199.33.20 eq 8443
permit tcp any host 10.199.33.21 eq 8443
permit tcp any host 10.100.255.90 eq 8443
deny ip any any log
ip radius source-interface Vlan301
radius-server attribute 8 include-in-access-req
radius-server dead-criteria tries 2
radius-server host 10.199.33.20 auth-port 1812 acct-port 1813 key 7 022E5C782C130A74586F1C0D0D
radius-server vsa send authentication
I get the login and AUP page then the failed page... I never see the priv-lvl 15 or the proxyacl? How do I do this with Guest server only?
Help!Without the ACS, only with the NAC guest is possible?
They can send me sample configuration?
Maybe you are looking for
-
Windows 8 on macbook air (mid 2011) dark screen
I downloaded the windows 8 retail edition from dream spark and wrote the iso file into a usb drive. I installed the windows 8 using GUID partition map successfully and the windows 8 was bootable. But when it's first booted, it says "getting ready for
-
How to read the properties file available in Server File structure in webdy
hi all, I have developed one webdynpro application. In this application i need to access mdm server to continue. For getting the connection i need to pass the IP addresses. Can i have code how to read the properties file which is residing in the ser
-
We are in the middle of a new ECC 6/CRM 7 implementation and would like to know the best way to accomplish SSO in our environment so that both the regular SAP GUI and the NWBC client can benefit from single sign on. We currently have two separate AD
-
Online Backup Failed (Status Its shows Scheduling failed)
Dear all , OS AIX , DB Oracle , SAP ECC6.0 , Tivoli Storage Manager Scheduled Online Backups are failed (Backups are fired through DB13) JOB Status : Scheduling failed Job Log: 02.12.2009 17:00:01 Job started 02.12.2009 17:00:01 St
-
E61 and MS Exchange Direct Push
Is there a way to set up MS Exchange Direct Push to push specific emails to E61 according to preset rules, such as "from sender", "sent to" etc... Thanks