NAC Profiler database utility for upgrade

I am trying to upgrade NAC Profiler Lite by following the following Cisco Doc
http://www.cisco.com/en/US/customer/docs/security/nac/profiler/release_notes/310/310rn.html#wp102045
In section Upgrading 2.1.8 Cisco NAC Profiler Server and Profiler Lite Standalone Systems to 3.1.0.
I'm trying to run the database migration utility. Utility is showing in the home/beacon directory. When I run the command specified in the Doc to untar the utility package (tar xvfz DB-utility_218to31x.tgz) I receive the followinig errors:
gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error exit delayed from previous errors
Any suggestions?

The file name is DB-utility_219to31x.tgz and the MD5 on the download page is 335b7ca5215394ccc94c7b48ca242a3b.
I'm not sure if it is changing during the download to my workstation or not. I had our IA Security guy look at it and he said there is no way for him to check the MD5 of the file on my workstation. Once I put it on the profiler, the MD5 is
d9093b0525e904f94e19825a57589ac1

Similar Messages

  • Utility for upgrade

    Hi ,
    In my company we have done upgrade from 4.5B to ECC 6.0
    I need to find out the obsolete commands and modify it. For this purpose i need to go to each customer developmet and search it. do we have any program which takes the obsolete statment as input and gives the list of programs  in which it is used
    Any clues
    Regards
    swatantra

    Hi,
    Use CODE INSPECTOR this does the job for you.
    You dont have to search manually. Just create a global variant for Code inspector and run the code inspector for all the Z programs.
    the tcode is SCI for code inspector.
    http://help.sap.com/saphelp_nw04/helpdata/en/4f/3d1540bf1af72ee10000000a1550b0/frameset.htm
    Cheers
    VJ
    Message was edited by: Vijayendra  Rao

  • Why did the latest update (31.1.2) delete database files for primary email account in profile?

    After restarting TB to apply the 31.1.2 update, all of the database files for my primary email account were apparently deleted. Restarting TB again got it to start syncing with the IMAP server again, but it has to download around 100,000 messages again because of this. Was this a design decision or is there a problem with the update itself? And why did it only affect my primary email account and leave the other 4 (much smaller ones) unscathed?

    1. Norton Internet Security 21.5.0.19
    2. Application Basics
    Name: Thunderbird
    Version: 31.1.2
    User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.1.2
    Profile Folder: Show Folder
    (Local drive)
    Application Build ID: 20140923203151
    Enabled Plugins: about:plugins
    Build Configuration: about:buildconfig
    Memory Use: about:memory
    Mail and News Accounts
    account1:
    INCOMING: account1, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
    OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
    account2:
    INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
    account3:
    INCOMING: account3, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
    OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
    account4:
    INCOMING: account4, , (imap) imap.mail.yahoo.com:993, SSL, passwordCleartext
    OUTGOING: smtp.mail.yahoo.com:465, SSL, passwordCleartext, true
    account5:
    INCOMING: account5, , (imap) imap-mail.outlook.com:993, SSL, passwordCleartext
    OUTGOING: smtp-mail.outlook.com:587, alwaysSTARTTLS, passwordCleartext, true
    account6:
    INCOMING: account6, , (imap) mail.centurylink.net:143, alwaysSTARTTLS, passwordCleartext
    OUTGOING: smtp.centurylink.net:587, alwaysSTARTTLS, passwordCleartext, true
    Crash Reports
    http://crash-stats.mozilla.com/report/index/bp-ef9e8cc4-d975-4a65-8417-652332140926 (9/25/2014)
    Extensions
    Important Modified Preferences
    Name: Value
    accessibility.typeaheadfind.flashBar: 0
    browser.cache.disk.capacity: 358400
    browser.cache.disk.smart_size.first_run: false
    browser.cache.disk.smart_size.use_old_max: false
    browser.cache.disk.smart_size_cached_value: 358400
    extensions.lastAppVersion: 31.1.2
    font.internaluseonly.changed: false
    font.name.monospace.el: Consolas
    font.name.monospace.tr: Consolas
    font.name.monospace.x-baltic: Consolas
    font.name.monospace.x-central-euro: Consolas
    font.name.monospace.x-cyrillic: Consolas
    font.name.monospace.x-unicode: Consolas
    font.name.monospace.x-western: Consolas
    font.name.sans-serif.el: Calibri
    font.name.sans-serif.tr: Calibri
    font.name.sans-serif.x-baltic: Calibri
    font.name.sans-serif.x-central-euro: Calibri
    font.name.sans-serif.x-cyrillic: Calibri
    font.name.sans-serif.x-unicode: Calibri
    font.name.sans-serif.x-western: Calibri
    font.name.serif.el: Cambria
    font.name.serif.tr: Cambria
    font.name.serif.x-baltic: Cambria
    font.name.serif.x-central-euro: Cambria
    font.name.serif.x-cyrillic: Cambria
    font.name.serif.x-unicode: Cambria
    font.name.serif.x-western: Cambria
    font.size.fixed.el: 14
    font.size.fixed.tr: 14
    font.size.fixed.x-baltic: 14
    font.size.fixed.x-central-euro: 14
    font.size.fixed.x-cyrillic: 14
    font.size.fixed.x-unicode: 14
    font.size.fixed.x-western: 14
    font.size.variable.el: 17
    font.size.variable.tr: 17
    font.size.variable.x-baltic: 17
    font.size.variable.x-central-euro: 17
    font.size.variable.x-cyrillic: 17
    font.size.variable.x-unicode: 17
    font.size.variable.x-western: 17
    gfx.direct3d.last_used_feature_level_idx: 0
    mail.openMessageBehavior.version: 1
    mail.winsearch.firstRunDone: true
    mailnews.database.global.datastore.id: 0bb49554-fa41-4ecf-af58-17c0753468e
    network.cookie.prefsMigrated: true
    places.database.lastMaintenance: 1411474192
    places.history.expiration.transient_current_max_pages: 104858
    plugin.importedState: true
    print.printer_Brother_HL-2270DW_series.print_bgcolor: false
    print.printer_Brother_HL-2270DW_series.print_bgimages: false
    print.printer_Brother_HL-2270DW_series.print_colorspace:
    print.printer_Brother_HL-2270DW_series.print_command:
    print.printer_Brother_HL-2270DW_series.print_downloadfonts: false
    print.printer_Brother_HL-2270DW_series.print_duplex: 0
    print.printer_Brother_HL-2270DW_series.print_edge_bottom: 0
    print.printer_Brother_HL-2270DW_series.print_edge_left: 0
    print.printer_Brother_HL-2270DW_series.print_edge_right: 0
    print.printer_Brother_HL-2270DW_series.print_edge_top: 0
    print.printer_Brother_HL-2270DW_series.print_evenpages: true
    print.printer_Brother_HL-2270DW_series.print_footercenter:
    print.printer_Brother_HL-2270DW_series.print_footerleft: &PT
    print.printer_Brother_HL-2270DW_series.print_footerright: &D
    print.printer_Brother_HL-2270DW_series.print_headercenter:
    print.printer_Brother_HL-2270DW_series.print_headerleft:
    print.printer_Brother_HL-2270DW_series.print_headerright:
    print.printer_Brother_HL-2270DW_series.print_in_color: true
    print.printer_Brother_HL-2270DW_series.print_margin_bottom: 0.5
    print.printer_Brother_HL-2270DW_series.print_margin_left: 0.5
    print.printer_Brother_HL-2270DW_series.print_margin_right: 0.5
    print.printer_Brother_HL-2270DW_series.print_margin_top: 0.5
    print.printer_Brother_HL-2270DW_series.print_oddpages: true
    print.printer_Brother_HL-2270DW_series.print_orientation: 0
    print.printer_Brother_HL-2270DW_series.print_page_delay: 50
    print.printer_Brother_HL-2270DW_series.print_paper_data: 1
    print.printer_Brother_HL-2270DW_series.print_paper_height: 11.00
    print.printer_Brother_HL-2270DW_series.print_paper_name:
    print.printer_Brother_HL-2270DW_series.print_paper_size_type: 0
    print.printer_Brother_HL-2270DW_series.print_paper_size_unit: 0
    print.printer_Brother_HL-2270DW_series.print_paper_width: 8.50
    print.printer_Brother_HL-2270DW_series.print_plex_name:
    print.printer_Brother_HL-2270DW_series.print_resolution: 0
    print.printer_Brother_HL-2270DW_series.print_resolution_name:
    print.printer_Brother_HL-2270DW_series.print_reversed: false
    print.printer_Brother_HL-2270DW_series.print_scaling: 1.00
    print.printer_Brother_HL-2270DW_series.print_shrink_to_fit: true
    print.printer_Brother_HL-2270DW_series.print_to_file: false
    print.printer_Brother_HL-2270DW_series.print_unwriteable_margin_bottom: 0
    print.printer_Brother_HL-2270DW_series.print_unwriteable_margin_left: 0
    print.printer_Brother_HL-2270DW_series.print_unwriteable_margin_right: 0
    print.printer_Brother_HL-2270DW_series.print_unwriteable_margin_top: 0
    Graphics
    Adapter Description: NVIDIA GeForce GTX 560
    Vendor ID: 0x10de
    Device ID: 0x1201
    Adapter RAM: 1024
    Adapter Drivers: nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
    Driver Version: 9.18.13.4052
    Driver Date: 7-2-2014
    Direct2D Enabled: true
    DirectWrite Enabled: true (6.2.9200.16492)
    ClearType Parameters: ClearType parameters not found
    WebGL Renderer: false
    GPU Accelerated Windows: 2/2 Direct3D 10
    AzureCanvasBackend: direct2d
    AzureSkiaAccelerated: 0
    AzureFallbackCanvasBackend: cairo
    AzureContentBackend: direct2d
    JavaScript
    Incremental GC: 1
    Accessibility
    Activated: 0
    Prevent Accessibility: 0
    Library Versions
    Expected minimum version
    Version in use
    NSPR
    4.10.6
    4.10.6
    NSS
    3.16.2.1 Basic ECC
    3.16.2.1 Basic ECC
    NSS Util
    3.16.2.1
    3.16.2.1
    NSS SSL
    3.16.2.1 Basic ECC
    3.16.2.1 Basic ECC
    NSS S/MIME
    3.16.2.1 Basic ECC
    3.16.2.1 Basic ECC
    Account5 is the one affected which is still attempting to sync. It also appears that my sync choices were altered without permission or notification. I always keep the Deleted folder and the POP subfolder from Hotmail accounts disabled since it is merely duplicating content in other folders. When re-checking the sync settings because it was taking so long, I found that the POP subfoler was selected for sync again.
    The crash report is from a later TB crash, the first one ever on this system.
    3. Windows 7 Ultimate Signature Edition, Cox Communications (shouldn't matter whatsoever), the affected account is Hotmail/Outlook.com, unaffected accounts: 2 GMail, 1 Yahoo, 1 CenturyLink

  • AGENT steps for Upgrading a database to new release

    I have a 9.2.0.6 database that needs upgrading to 9.2.0.7. The OMA is 10.2.0.2. Are there any special steps required in the upgrade to the database and listener for the OMA? The ORACLE_HOME and TNS_ADMIN will be changing to reflect the new software. I know that the $AGENT_HOME/sysman/emd/targets.xml has references to the oracle db version.

    Install base release, Install patchset, Install
    one-off's required.
    ${ORACLE_BASE}/product/9.2.0.7OK. How cost effective is it to go through all that for every Server and Database in an organisation? BTW. How many Servers and Databases do you have in your Organisation?
    The install can occur at anytime while the system is
    up, So all that is needed is the migration of the
    database from the ${ORACLE_BASE}/product/9.2.0.6 home
    to the new home - and one-offs. Again, how do you measure this in terms of cost (resource, Infrastrucure, Time, money to do)? I will do this only if there is requirement for Parallel run of both(e.g. for an environment supporting both component releases). Else, all I need is backup 9206 server and databases to backup media and upgrade to 9207.
    This greatly reduces our downtime and provides fall back if necessary.The difference in down time here is the time you will use to run the installer for binaries (whch takes the least amount of time). You still need the downtime to copy and upgrade the database after you have gone through that long process. And depending on the number of patchsets, CPUs, one-offs that has been applied to 9206, you are spending hours upgrading from 9206 to 9207.
    I am concerned that a simple "Component Release" upgrade will require a lot of resource, Infrastrucure, Time, money to do. What will you do if you are managing databases for 10 different projects made up of 50 Oracle Server Installations, each with 4 Database Environments (Dev, SysTest, CAT and Prod = 200 Databases) and on four different platforms with some housing Terabytes of data. Personally, the process you go through for a Component Release will cost me unnecessary thousands of pounds. So, I will do what you do for only Major Release (e.g 9.2 to 10.1). If it is "really" necessary, I will do it for a Maintenance Release (9.1 to 9.2), but not a Component Release (9.2.0.6 to 9.2.0.7)

  • Auto Upgrade Utility for WRT54GL v1.1

    Is there an Auto Upgrade Utility for WRT54GL v1.1?
    I searched but could not find one.
    Jeff

    try   EASYLINK CONNECT  ...

  • How to use 10.2.0.1.0 Export utility for 10.1.0.2.0 databases

    Hi All
    My computer server is using Oracle 10.1.0.2.0.
    Client is using Oracle 10.2.0.1.0
    How to use 10.2.0.1.0 Export utility for 10.1.0.2.0 databases without the following errors:
    EXP-00056: ORACLE error 6550 encountered
    ORA-06550: line 1, column 41:
    PLS-00302: component 'SET_NO_OUTLINES' must be declared
    ORA-06550: line 1, column 15:
    PL/SQL: Statement ignored
    EXP-00000: Export terminated unsuccessfully
    Thiensu

    Command export:
    C:\Documents and Settings\USER>exp pjdb/pjdb@ORCLfile=C:\pjdb.dmp full=no
    Export: Release 10.2.0.1.0 - Production on Thu Apr 23 17:01:06 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    EXP-00056: ORACLE error 6550 encountered
    ORA-06550: line 1, column 41:
    PLS-00302: component 'SET_NO_OUTLINES' must be declared
    ORA-06550: line 1, column 15:
    PL/SQL: Statement ignored
    EXP-00000: Export terminated unsuccessfully
    C:\Documents and Settings\USER>
    Thiensu

  • P745-S4217 Utility Common Driver for Upgrade to Windows 10

    I have a Satellite P745-S4217 laptop running Windows 7 64bit and I want to upgrade to Windows 10, but I am getting the following message:  The app developers haven't made these apps compatible with Windows 10, so they won't work.  Check with the developers for support.             Utility Common Driver            Toshiba I ran a search on my computer and find no "Utility Common Driver".  I have searched on the internet with Toshiba and in general to see if I can download this driver and I do not find it anywhere, only how to uninstall it.  I do see that my Model is not on the list of models that are compatible for Windows 10.  So my question for Toshiba is...... 1) Are you working on making all models available for upgrade to Windows 10 or am I out of luck? 2) If you are working on it, when can I expect to be able to download this driver so I can download Windows 10?3) Should my computer have had the Utility Common driver when I bought this laptop new? If anyone knows of the answers to these questions, I'd appreciate any feedback.

    I am also having the same issue with a P55, Please make support for windows 10 I reallly want to use a faster OS.

  • Since I upgraded to Lion 10.7.2, my external HD is no longer visible in AirPort utility (in the AirPort disks tab). I also installed the AirPort utility for iOS5, it reported a disk problem, but running Disk Utility on the Mac showed no issues. Help!

    To expand on the question, I have performed the following steps:
    1 - Unplugged external drive (1TB WD MyBook) from the Time Capsule
    2 - Reconnected it. At this point, AirPort utility for iOS5 reported a problem with the disk (Time Capsule light was blinking Orange)
    3 - Unplugged external drive, connected it to MacBook Pro, ran Disk Utility. It found no problems (disk visible straight away on the MacBook Pro).
    4 - Reconnected to Time Capsule - still doesn't show up under the "Disks" option under Air Port utility. Or rather, the hardware is visible (i.e the physical disk) but not the volume.
    5 - I tried another external hard drive, and the volume also doesn't appear in the Disk section under the AirPort utility.
    The WD disk is formatted as Mac OS Extended (Journaled).
    This is a big problem for me, as the drive houses my iTunes library.
    Anyone else had a similar problem? It all worked flawlessly until last week.

    I love computers.
    Have managed to fix this already. Been working the issue for a few days now, and a few minutes after writing the above post I decided to reset the Time Capsule to factory default settings.
    After entering all my details again (used same network names, passwords etc) the Time Capsule was rebooted. When it came back on line - guess what? Yep, the MyBook WD drive is now visibile. I can connect via the network from my other machines to the drive, and iTunes is back.
    So - thought I would post my resolution in case it helps others.

  • How to find out profile optoins value for user from database?

    I have PA debug enabled for a particular user in my ebusiness suite environment. I need to find out for what user is it enabled.
    FND_PROFILE_OPTIONS shows that its enabled for user and responsibility level. But I am not able to find out for which user/responsibility is it enabled, as this only shows flags.
    Can someone please tell me what table/view I need to check for that.

    Hi;
    Please see:
    How To Check If a Profile Option Is Set In Oracle Application [ID 470102.1]
    How to list E-Business Suite Profile Option values for all levels using SQLPlus [ID 201945.1]
    How to Search all of the Profile Options for a Specific Value [ID 282382.1]
    Regard
    Helios

  • Access switch lost contact with nac profiler

    hi all,
    We have implement HA for nac profiler using version 3.1.1_18 .My problem is we need manually update for all access switch to connected with nac profiler server and then endpoint detect if i'm don't click button update for all access switch not see the new endpoint .On the acceess switch we configure SNMP cisconac RO and cisconac1 RW .For the SNMP is it needed manually update or automatic if new endpoint connect to the network ?here i'm attach on the my configuration SNMP ..

    Hi Larry,
    I had the same problem with iTune 10.6.5, and one cannot uninstall it. I was on the phone with Apple wireless support. The solution is to upgrae firmware on the Express, whihc cannot be doen with the latest airport utilities. HOwever, Apple re-posted Airport utility 5.6 for lion, which will then allow you to upgrade the firmware on older Aplle Express Units. This in turn will allow iTune 10.6 to communicate properly wit the Express. Doing so  restored my connection to the speakesr without any further issues.
    Give it a try...
    the utility i sloctaed at:
    http://support.apple.com/kb/DL1482?viewlocale=en_US&locale=en_US
    Best,
    rk007

  • Can anyone recommend a free maintenance utility for panther ?

    I have an iBook running OS 10.3.5 Panther. It is not running as well as it used to despite clearing the hard drive of old files. I think it would benefit from some kind of a maintenance script utility that would clean and optimise the system. This is a spare computer that we use mostly for surfing, email and iTunes, my main computer is a newer Macbook. Does anyone have any recommendations for a good 3rd party downloadable utility for Panther, preferably free or shareware, that I could install and run periodically?

    Hi 12frets56!
    "Can anyone tell me what "BSD Subsystem installed" means? .... How would I know if my iBook has this?"
    BSD Subsystem is a Unix tool, and numerous applications require it to function.
    If I find a more technical definition, I'll post it!
    Unless you performed a custom install, and chose to not install it, the BSD subsystem is installed by default when you install Mac OS X.
    EDIT: Here ya go Berkeley Software Ditrubution!
    Navigate to HD > Library > Receipts. If BSD is installed, the file BSD.pkg will be present.
    If it is not installed, repost for further instruction.
    As Texas Mac Man (Tom) posted, insufficient available space, can cause performance issues, system corruption, and possible loss of data.
    Depending on Mac system usage habits, it is a general recommendation, to keep 10% to as much as 20%, of the Total capacity, available at all times.
    Review the suggestions, in the documents that I have linked to below.
    Authored by Dr Smoke:
    Problems From Insufficient RAM And Free Hard Disk Space
    Freeing Space On Your Mac OS X Startup Disk
    Have you ever run any routine Maintenance procedures, as suggested in the articles linked to below?
    Mac OS X 10.3/10.4: System Maintenance, authored by Gulliver
    Maintaining Mac OS X, authored by Dr Smoke
    Is the Mac shutdown overnight, or does it run 24/7?
    As posted, if you turn the Mac off nightly, the Background Maintenance Tasks, are never run.
    The CRON Commands, can be run manually as well, using Terminal.
    I also use MacJanitor when necessary.
    INSTRUCTIONS TO RUN CRON MANUAL COMMANDS
    Quit all applications/programs.
    Navigate to HD > Applications > Utilities.
    Double click on Terminal, to open.
    At the prompt, type:
    sudo periodic daily
    Press Return.
    Enter your Admin password when prompted, then press Return.
    This will execute the daily script that is sheduled to run every night.
    When completed, repeat this procedure, but change the command to:
    sudo periodic weekly
    This one rebuilds a database or two, and usually takes somewhat longer to complete. It is scheduled to run once a week.
    Repeat again, with command:
    sudo periodic monthly
    Or they can all be run in one pass, which is preferable, with this command:
    sudo periodic daily weekly monthly
    When the tasks complete, and return to the prompt, you may quit Terminal.
    Restart the Mac, and run Repair Permissions.
    TO REPAIR PERMISSIONS ON THE STARTUP DISK
    1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
    2.Click First Aid.
    3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
    Rerun RP, until the only messages reported, are listed here Spurious Permissions Errors Using: 10.3.x, authored by Michael Conniff.
    When "Repair Permissions" is complete. Quit "Disk Utility".
    After you have done some Spring Cleaning, you can use the 10.3.9 Combo Update, to upgrade to the final version.
    ali b

  • Unable to see Active Directory Groups in the User Profile Database after Profile Import

    ***Major Update - I have finally been able to get the direct attention of the folks responsible for the User Profile Service on the SharePoint Product Team.  Long story short, they have reproduced the error and identified as an actual mistake
    that needs to be fixed, so it is now officially in the bug pipeline and will be fixed.  The current estimate is some time in the summer.  They will keep me updated with timeframes, which I am allowed to share as time goes on.
    SharePoint Server 2010 Enterprise RTM. W2K8R2 w/multi-server setup:
    AD/DNS
    SQL 2008
    WFE
    APP
    Claims Mode Web App only using Windows Integrated Auth
    So, this was never a problem in 2007, and I didn't even realize it was a problem in 2010 until I started to build a solution that utilized my blog article:
    InfoPath - User Roles in Browser-Enabled Forms Using AD Groups.  I went to utilize the same web method of the same web service, but I noticed that no data was showing up at all.  Typically,
    the GetUserMembership/GetCommonMembership methods return the specified user's memberships: AD Security Groups, AD Distribution Lists, and SharePoint Sites (not SharePoint Groups, though).
    My user profile sync is working.  All AD users are pulled in with the proper profile data.
    "Users and Groups" is selected in the Synchronization Entities section of my Sync Settings.
    Security groups are working for permissions and audience targeting.  Confirmed my users are affected properly by the use of Security Groups.
    My query to the GetUserMemberships web method (and GetCommonMemberships) is running (not failing), but it's not returning anything even though my user is in some Security Groups and has explicit membership to multiple sites.
    The GetUserProfileByName method of the same UserProfileService.asmx web service
    returns all the regular profile data like expected, so the web service works and my profile database is populated
    Basically, I'm not seeing my AD groups or any membership data populated in the profile database.  I did use MIISCLIENT.exe to see what I could find, and here is what I saw:
    Using the Metaverse Search, I searched for the "person" type and saw all of the users in my profile sync connection (single OU)
    Using the same tool, I searched for the "group" type and saw nothing, but the message said 4 items were retrieved
    I realized that the only column showing was displayName, and they were blank, so I added other columns to be sure
    objectGUID, objectType, distinguishedName all showed values, and I could now see all the Security Groups from the OU where I'm doing my profile sync
    My "person" objects all have displayNames showing but none of the groups do.  In SharePoint, the GetUserMemberships method relies on displayName and accountName, but neither are coming through the profile import
    So, it does seem like the groups are coming in with the profile import, but I can't see them.  I also can't verify that the groups are being associated with my users in the profile database, because doing a query to the membership methods returns nothing...not
    even blank rows.
    ***Edit:  New information!  Regular AD Distribution Lists _do_ work properly.  I just never bothered testing them until folks on my blog notified me.  DLs come through the profile sync, are visible in the profile database, and show up
    when using the GetUserMemberships method.
    ***Edit: Ok, now we're getting somewhere.  I checked my last profile sync with the MIISCLIENT, and this is what I found:
    Here are the properties of my Distribution List:
    Here are the properties of my Security Group:
    Notice that the groupType value of the DL is a normal integer (2), but the groupType value of the SG is some crazy negative number.  Both types are still lacking DisplayNames for some reason, but when I retrieve the DL via GetUserMemberships, it DOES
    show the proper DisplayName despite nothing showing in the MIISCLIENT.
    SharePoint Architect || Microsoft MVP ||
    My Blog

    Hello Clayton,
    I have same problem with SP 2010 and now I am testing SP 2013 and seems that the problem still.aa
    Probably I have some configuration problem, but all seems work, except this.
    SharePoint 2013 has no improvements on this. Until seeing this thread, I thought it was an issue within my farm configuration or AD Service account for User Profile Sync. And I've dug far and wide for any other possible settings which would prevent users
    from populating in the site people-picker. This might be flagged as off-topic, but I'll beg differ. How can I expect SharePoint to retrieve AD Users and Groups for accuracy in the sites which rely on this server??? Frustrating. I've spent hours and days on
    this! I have 3 SP2013 farms with multiple clients (different OU's/containers and security groups). Testing in a separate QA DEV farm with the same config. NO luck yet!
    This is where I'm at with it (posted this as a question recently on SharePoint Stack Exchange):
    "Help.... Please.... Users from AD groups are not populating in the site people picker. I've set up a SharePoint 2013 site collection permissions group with only AD groups in it, no users added directly. Whether or not I give this SharePoint group permissions
    to the site content, I still get none of the AD users showing up in the people picker. I have done the iisreset after adding the groups.
    I've checked all of the people picker properties in stsadm to be sure there are no constraints in effect on the web app or site collections.  User profiles are synching and I've tried both AD import and User Profile Sync.  The AD groups are security
    groups, though not email-enabled.  The AD service account has all the special permissions. My web app is claims based. My app pool runs with Network Service account.  No policies in place to restrict users, checked CA and the site collection settings.
    What am I missing? I've read in multiple places that this is a supported/working config. So why can't I get these users to populate in people picker for things like Assigned To in a tasks list, or attendees of an event? "
    There is some pretty good insight here, but no real hope:
    User profile
    synchronization: importing users and security groups in SharePoint 2010
    Other Properties that I checked, before realizing this was an issue with the Profile Import...
    stsadm -o getproperty -pn siteuseraccountdirectorypath -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-activedirectorysearchtimeout -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-distributionlistsearchdomains -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-nowindowsaccountsfornonwindowsauthenticationmode -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-onlysearchwithinsitecollection -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-searchadcustomfilter -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-searchadcustomquery -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-searchadforests -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-serviceaccountdirectorypaths -url https://URL
    Hope we find a better answer, as it IS very misleading. User Profile Import specifies Users, or Users and Groups. Nothing is said about Containers or Distribution Groups, worse yet there lacks any clear disclosure about how "Groups" will not
    actually import if they are a Global Security Group and the users contained within them exclusively will NOT be included in your profiles,
    nor in any compiled Audiences. Which was another BIG bummer!
    I'm hoping to see future improvements on the Group imports.

  • NAC Profiler integration - cant add filter list on CAM

    Hi All,
    I have a problem regarding the Profiler - NAC integration for end point profiling.
    Here is the situation:
    I already created the integration based on the steps on the guide: Configuring Cisco NAC Appliance Integration. I think the configuration is correct because i can do database synchronization between Profiler and CAM. Here is the Profiler server log:
       NAC_SYNC: Task_Queue_Runner starting up
       NAC_SYNC: Profiler / NAC Synchronization END [add 0, upd 0, desc 0, rm 0]
       NAC_SYNC: Profiler / NAC Synchronization START
       INFO: [2010-12-15 11:01:09 (fcapGetHWAddr:49)]  Getting MAC for eth0
    I already created end point profile named "Admin" which is based on IP address. I also created NAC events based on the end point profile "Admin".
    The NAC event is profiling "Admin" to a NAC role. The purpose for this event is to bypass "Admin" from NAC authentication so that the "Admin" can connect to network automatically to one NAC role.
    However when "Admin" connect to network, it is still challanged by NAC. I dont see the "Admin" on the CAM filter list either.
    This means that the end point profiling is still failed.
    Is there anyone who have any experiences with this?
    Thank you for the supports and comments
    Imad

    Hi,
    Ok, so the Profiler will only add devices to the CAM filter list, if a device fals into a profile for which a nac event is configured.
    If there is no device on the profile -> No NAC event -> No device added to the CAM.
    Is there any device that was assigned to that profile?
    Regarding the Active Rule column, it is used to quickly  ascertain which Endpoint Profiles on a system (if any) contain an Active  Rule that will result in the Profiler system doing active collection if  one or more NetInquiry Collector component modules are enabled. Active  profiling rules and active profiling is described in detail in the "Configuration of Active Directory Data Rules" section: http://www.cisco.com/en/US/docs/security/nac/profiler/configuration_guide/311/p_endpt_part231.html#wpxref59325.
    HTH,
    Tiago

  • How do I access Disk Utility for 10.7.1?

    How do I access Disk Utility for 10.7.1? I found it in the forums a few weeks ago, used it, then lost the directions. This is a last ditch attempt
    to use OS Lion. I parted my hair incorrectly when I installed and have been plagued by the dread rainbow spinning ball in EVERY application. Yes, every. Name one, Safari, Firefox, Text Edit, Mail, Excel, Word, iTunes, Garage Band, Calculator, Calender, iPhoto....yes, every, and I cannot
    find a solution that works. I have back up files on two different hard drives 500 gig and 1 terrabyte with all my music, photo and writing files.
    I am a writer and a musician so imagine the frustration. OS 10.6 is an option of course. My dedication to Apple and each new OS is deep so
    I am hoping that somehow there will a fix, an upgrade, something that does not require me to go bac to the much more endangered species named OS.
    hahhaa! Just stalled waiting for the ball to finish with it's random spinning.... SO, this is like a last desperate .... it just did two more stalls.
    NO OTHER apps running, just little Firefox holding on for dear life, last desperate request for a fix.
    MacKeeper has been great in sending helpful directions for getting the Antivirus to work after it mysteriously decided to stop working, Quite MacKeeper,  go to Activity Monitor, force quit helper, start up MacKeeper and run program. It works!
    SO before my third stall stops me, please post directions to open disk utility in administration mode so that I can do any further repairs that have not worked by using it from the open system. Also keychain synching stopped working with Lion.
    Thanks to any and all who can help.

    Press and hold Command-R keys and reboot. You'll then start up in the Lion Recovery HD. You'll find Disk Utility there.
    Command-R to the rescue.
    Just hold down Command-R during startup and Lion Recovery springs into action. It lets you choose from common utilities: You can run Disk Utility to check or repair your hard drive, erase your hard drive and reinstall a fresh copy of Lion, or restore your Mac from a Time Machine backup. You can even use Safari to get help from Apple Support online. And if Lion Recovery encounters problems, it will automatically connect to Apple over the Internet.

  • I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me kn

    I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?

    yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
    When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
    I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this.

Maybe you are looking for