Nach Installation Fehlermeldung..für Schlüssel\Software\MozillaPlugins\.. keine Berechtigung

Hallo,
ich bin neu im Forum und hoffe, eine Hilfe zu bekommen.
Auf meinem Rechner (Windows XP) lief der Adobe Reader nicht mehr einwandfrei. Deshalb habe ich die Update-Funktion aktiviert. Dabei kam eine Fehlermeldung. Den Inhalt habe ich leider vergessen. Ich musste aber feststellen, dass der Adobe Reader durch den fehlerhaften Update gelöscht worden ist. Also habe ich einen Download gestartet. Jedoch erhalte ich nach Abschluss der Installation die Meldung, dass die Berechtigung für den Schlüssel in den Mozilla Plugins nicht vorhanden ist.
Zuerst dachte ich, dass mein Benutzerkonto keine Administartionsrechte hat. Dann habe ich für das Download statt Firefox einen anderen Browser verwendet. Leider aber ohne Erfolg. Es kommt jedes Mal die oben beschrieben Fehlermeldung.
Was habe ich nicht richtig gemacht bzw. was kann ich machen, um den Download erfolgreich durchzuführen.
Gruß Dieter_HH

Darf ich vorschlagen, dass Sie entweder einen Übersetzer wie Google verwenden, oder posten Sie Ihre Fragen im Forum in Deutsch: http://forums.adobe.com/community/international_forums/deutsche

Similar Messages

Adobe Premier Elements 12 lässt sich nach Installation nicht öffnen.

Adobe Premier Elements 12 lässt sich nach Installation nicht öffnen. Der Startbildschirm erscheint zwar, aber beim Versuch ein neues Projekt zu öffnen erscheint kurz der Laufbalken, der dann kurz darauf wieder verschwindet ohne das ein Projekt geöffnet wird - der Startbildschirm bleibt. Auf einem anderen Rechner, auf dem ich die gleichen Windows Updates installiert habe funktioniert es ohne Probleme. Ein Deinstallation und Neuinstallation brachte keinen Erfolg - das Problem bleibt. Bitte dringend um Hilfe!!!

Macht es Ihnen keine Fehlermeldung beim Öffnen PSE-Editor?
Hat seine jemals gearbeitet?
Sie erwähnten, dass Sie Nik haben, haben Sie überprüft Entfernen Nik und dann öffnet PSE-Editor?

Problem: Schlüssel konnte nicht geöffnet werden

Hallo liebe Adobe Community!
Ich habe ein Problem beim installieren des Adobe Readers 9.4.0 German
Ich erhalte folgende Fehlmeldung:
Schlüssel konnte nicht geöffnet werden: HKEY_L0CAL_MACHINE32\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\OptionalComponents.
Überprüfen Sie, ob Sie ausreichende Zugriffsrechte auf diesen Schlüssel besitzen, oder setzen Sie sich mit Ihrem Supportpersonal in Verbindung
Was kann ich tun???
Danke für Hilfe im voraus!
James

In the link, it's all about a folder that I should assign the rights to. My problem, however, is that probably exist on a key no rights at all but is not there.

Problem on installation of linux through the vmware software on compaq CQ60

Problem on installation of linux through the vmware software on xp operating system. My laptop is Compac CQ60.
The error message is no device found compatable for the installation.

user12190571 wrote:
The error message is no device found compatable for the installation.The question after this kind of information is usually : What is the exact error you got, from who and when you were doing what.

Installation error message for Oracle Database software for version 10g

Would someone be able to advise why I keep getting the following error message whilst installing Oracle trial Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition? Link listed below : -
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Error message "Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp"
Below is the 12 steps that I go through, please advise what I'm doing wrong : -
1. (Operations) default is Create a database
2. (Database templetes) default is general purpose
3. (Database Identification) projemp.local for Global database name & projemp for SID
4. (Management options) default is "Configure the database with Enterprise manager, also the options button has been clicked for "Use database control for database management"
5. (Database Credentials) the options button has been clicked for "Use the same password for all accounts" so I've set up a new password, was that correct?
6. (Storage options) the options button is clicked for "File System - use the file system for database storage.
7. (Database file locations) the options button is clicked for "Use database file locations for template" Is this option correct? Other options are Use common location for all database files or use Oracle-managed files?
8. (Recovery configuration) the options button is clicked for "Specify flash recovery area
9. (Database content) nothing has been selected, the only option is "Sample schemas" should that be clicked?
10. (Initialization parameters) the options button is clicked for "Typical- allocate memory as a % of the total physical memory
11. (Database storage) no options available
12. (Creation options) the options button has been selected for "Create Database"
Click finish
I then get a screen stating General purpose, click OK then I get the following error message as stated at the start of this e-mail ""Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".
Regards
Phil

855880 wrote:
I have been trying to install the "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition" about six times with no success.Do you realize you just mentioned 3 different and distinct products? So which one are you installing?
>
I've gone through my courses instructions as listed above (1-12) and end up with the following error message"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".What course?
>
I've removed the software from my computer using control panel, programs & features then uninstall once but the other five times the software hasn't been listed. Whilst the Oracle was on my task bar I was able to install using Start > Programs > Oracle - HOME-NAME > Database Administration > Database Configuration Assistant.No you didn't. Database Configuration Assistant does not remove software. It can remove a database. As I mentioned before, there is a difference between the software and the objects that software manages. Deleting an Excel spreadsheet is not the same as deleting Microsoft Office. Deleting an Oracle database with Database configuration assistant is not the same as removing the Oracle software.
>
Now that oracle is not on my task bar I've unzipped the link below, clicked on db, Disk1, setup, changed the Database password (is that correct?) install and I get the following error message "Check complete. The overall result of this check is: Failed<<<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses;
However, before you can do this, you must configure the Microsoft LoopBack Adaptor to be the primary network adapter on the system. See the installation Guide for more details on installing the software on systems configured with DHCP."
So what did you do with the above error message? Did you follow up on what it said? Did you read the very fine Installation Guide that comes with the software? Did you read the section on networking considerations where it discussed DHCP assigned addresses and installing the loopback adapter?
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Ok, that link takes us to the download page, which does not shed any light at all on your problems
I'm using Windows Vista Home Premium, 32 bit operating system, and my computer is saying I have 142 GB free space.
If you read the installation manual that came with the downloaded software, you'd have seen in the prerequisites that Home editions of Windows are NOT listed as supported platforms, whereas Business, Enterprise, and Ultimate editions specifically ARE listed as supportd.
Hope this is some help.And
I'm not to clever on computers so would you be able to advise how I get to the command window to issue the SET command please?
Also I've no idea what OS user I am, I'm taking an on-line Oracle course and been advised to install "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition"
How do I find out if I'm part of an Administrator, ORA_DBA group ?
Can you walk me through how to create the directory from command line please?Ok, given the above statements from you, I'm not even sure where to begin. I don't want to be cruel, but this self-admitted lack of even the most rudimentary knowledge by someone attempting to learn about Oracle is truly astounding. What course are you taking? Why are you taking this course?

When install iTunes 11.1.4 It says Apple Mobile Device Service service will not start. It was started when I began the installation. Is this an Apple software bug?

When install iTunes 11.1.4 It says Apple Mobile Device Service service will not start. It was started when I began the installation. Is this an Apple software bug?

I have this issue. It isn't the MSVCR80 issue. No matter what I do nothing will let me even INSTALL Apple Moblie Device. Further details are in my thread:
https://discussions.apple.com/thread/5831093

Lion Install Failed "The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."

Not a comforting message to see...
Here are the errors just before the above message is emitted and the install ends.
Jul 26 05:33:33 localhost OSInstaller[344]: PackageKit: Extracting file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/Essentials.pkg (destination=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, uid=0)
Jul 26 05:34:51 localhost OSInstaller[344]: PackageKit: Got copier error 2 extracting to path ./usr/lib/zsh/4.3.11/zsh/zselect.so: Read-only file system
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/DataPool.c:135: Error: finished pool without filling it
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/commonUtils.c:360: Error: fh_pread -1
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/StreamCompressor.c :294: Error: pread failed for /Volumes/i7Mac/.OSInstallSandbox-tmp/Root//usr/lib/zsh/4.3.11/zsh/zselect.so: Undefined error: 0
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/StreamCompressor.c :928: Error: returning errno 22 from FinishStreamCompressorQueue
Jul 26 05:35:33 localhost OSInstaller[344]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “Essentials.pkg”." UserInfo=0x7f83610395f0 {NSLocalizedDescription=An error occurred while extracting files from the package “Essentials.pkg”., NSFilePath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, NSURL=Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg, PKInstallPackageIdentifier=com.apple.pkg.Essentials, NSUnderlyingError=0x7f8360d42420 "The operation couldn’t be completed. FinishStreamCompressorQueue error"} {
         NSFilePath = "/Volumes/i7Mac/.OSInstallSandbox-tmp/Root";
         NSLocalizedDescription = "An error occurred while extracting files from the package \U201cEssentials.pkg\U201d.";
         NSURL = "Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg";
         NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=1 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\" UserInfo=0x7f8360d47220 {NSLocalizedFailureReason=FinishStreamCompressorQueue error, offset=2847022, type=BOMCopierFatalError, sourcePath=/Volumes/Mac OS X Install DVD/Packages/Essentials.pkg, destinationPath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root}";
         PKInstallPackageIdentifier = "com.apple.pkg.Essentials";
Jul 26 05:35:33 localhost OSInstaller[344]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “Essentials.pkg”." UserInfo=0x7f83610395f0 {NSLocalizedDescription=An error occurred while extracting files from the package “Essentials.pkg”., NSFilePath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, NSURL=Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg, PKInstallPackageIdentifier=com.apple.pkg.Essentials, NSUnderlyingError=0x7f8360d42420 "The operation couldn’t be completed. FinishStreamCompressorQueue error"}
Jul 26 05:35:34 localhost OSInstaller[344]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
If I boot to the "Recovery HD" I get a message "Installation Failed, Try re-intalling" Which would be a fine idea, but I can't because if I re-start installation from the hard drive I get the above errors.
I've burned the "InstallESD.img" to a DVD, but it also doesn't seem to work. Comes up as though I'm in the Reco

Jen,
Here's what I did to get Lion installed:
Burn the installer to a DVD and install from there. It worked for me. Here's what you need to do:
First you need another computer running at least 10.6.8.
1. On the other computer go to 'App Store' (make sure you're logged in to the App Store with the AppleID you used on the troubled computer)
2. Click on 'Purchased' in the 'App Store' window's toolbar
3. If you are on 10.6.8, and haven't downloaded Lion on that computer just click "Install" to download the installation application.
3. a, if the other computer is already running Lion, you'll need to re-download the installer.
3. b. Hold down 'Option' when selecting 'Purchased' then you click "Install"
4. When the Lion Installer starts up, just quit it. You want to work with the Installer application.
5. Find the "Install Lion OS X" application in the 'Applications' folder.
6. Hold down 'Control' and click on the application and select 'Show Package Contents'
7. Find 'InstallESD.dmg' which is in the "Shared Support" folder and copy it to your desktop.
8. Burn 'InstallESD.dmg' to a DVD ('Disk Utility' is simplest to do this).
9. Put the new install DVD into the computer that has Lion partially installed and reboot holding down the "C" key.
10. run the installer as normal, selecting your harddrive as the target.
In my case, when it rebooted to the harddisk the Lion installer started AGAIN. If this happens, let it run. Then you should be done.
Hope this helps.

Adobe Registerkarte wird in Word2007 nach Installation von Adobe Acrobat XI Pro nicht erstellt!

@Ich habe Windows7 und Microsoft Office 2007 Pro. Bis jetzt hat Adobe immer bei der Installation die Registerkarte "Acrobat" in Word erstellt.
Kürzlich hing sich Word beim Konvertieren einer Worddatei in PDF auf. Ich habe abgebrochen und dann Word wiedergeladen. Plötzlich war nun die Registerkarte "Acrobat" nicht mehr zu sehen.
Ein Abschalten des Rechners und wieder hochfahren hat auch nichts gebracht.
Auch eine Neuinstallation von Microsoft office 2007 und danach von Adobe Acrobat XI zeigte keine Registerkarte mehr in Word. Bei den anderen Officeprogrammen z.B. Excel funktioniert es.
Kann mir bitte jemand Helfen?
PS: Der Adobe Destiller funktioniert im Word, aber dabei kann man nicht soviele Einstellungen machen z.B. Lesezeichen erstellen etc.!

Sehr geehrter Herr Alheit,
recht herzlichen Dank für Ihre Mail.
Es war die Lösung meines Problems.
Nochmals lieben Dank und freundliche Grüße
Hans Simeaner
Am 16.10.2014 16:50, schrieb Bernd Alheit:
>
Adobe Registerkarte wird in Word2007 nach Installation von Adobe
Acrobat XI Pro nicht erstellt!
created by Bernd Alheit <https://forums.adobe.com/people/Bernd+Alheit>
in /Deutsche Foren/ - View the full discussion
<https://forums.adobe.com/message/6836171#6836171>

Mac Install Fail - The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance

On Mac OS X 10.9.5
After downloading CC from http://www.tss.qld.edu.au/itdepartment/AdobeCreativeCloud.aspx
The .zip download is fine.
The installer runs but stops half way through (during "running scripts") and gives the error message in the pic below
The installation failed - The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance
ANY HELP HUGELY APPRECIATED. I have know idea what to do
Thanks
Steve

Since you did not download from Adobe, I don't think Adobe can help
When I clicked the link you provided, it LOOKS like your school has created custom install packages... so check there

Snow Leopard 10.6.3 upgrade issues.. I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded. Any suggestions?

I've tried to upgrade to Snow Leopard 10.6.3. I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded. Any suggestions?

Are you booting from the retail disc to do the installation, or running it while booted from Macintosh HD?
It should work either way, but it doesn't always work when booted from Macintosh HD. The system files are supposed to be moved into place during the restart (while the HD is unmounted) making for a long restart time which sometimes causes people to think somethings wrong and abort it. Which is a bad move.
If you're booting from the retail disc it's less obvious what the problem may be; however if you've tried it from booted from the HD and it's failed, then tried booting from the disc, it will fail again because the system components are already on the HD in a disc image waiting to be moved into place.
Whichever way you were tryig, I'd try downloading OmnDiskSweeper (it's free) and using it to see if there's a large package (around 7-10 GB) lurking somewhere that may contain the installer files. If you do, you'll need to trash that before the installer will see a 'clean' system again.
It's also worth asking how much free space you have on your HD - if there's not enough for the installer to use for the temporary package or dmg, it'll fail.
Was there no warning dialogue after the unsuccessful install?
Message was edited by: noondaywitch ; link added

After the installation of os x Lion my software from HP don't work

After the installation of os x Lion my software from HP don't work

you try reinstalling the HP software?
What HP software are you referring to?

While trying to re-install Mac OS X, appears the following screen: Install failed Mac OS X could not be installed on your computer The installer encountered an error that caused the installation to fail. Contact the software manufacture for assistance. C

While trying to re-install Mac OS X, appears the following screen:
Install failed
Mac OS X could not be installed on your computer
The installer encountered an error that caused the installation to fail.
Contact the software manufacture for assistance.
Click Restart to restart your computer and try installing again.

You should be able to install Mac OS X 10.7 or later on your 2011 MacBook Pro without issue, if it came with 10.6.3 as your signature suggests. Mind you, any 2011 MacBook Pro must use the original 10.6 installer disc labelled MacBook Pro if it desires to have 10.6 installed on it. The retail installer disc will not work on that model, nor will one from another age MacBook Pro, or other model labelled installer. Also
10.7 came both on USB Flash drive and Mac App Store installer versions. Both required either 10.6.6 minimum be pre-installed, or no Mac OS X operating system on the drive or partition it was to be installed on.
10.7.1 through 10.7.5 combo could be installed only once 10.7 had been installed. A combo update is available for installing on top of any version of 10.7. Otherwise only the preceding version could be updated to the next.
10.8 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
10.8.1 to 10.8.5 combo could be installed only once 10.8 had been installed. A combo update is available for installing on top of any version of 10.8. Otherwise only the preceding version could be updated to the next.
10.9 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
Both 10.9 and 10.9.1 had a serious security vulnerability, which only 10.9.2 addressed.
10.9.2 combo could be installed only once 10.9 had been installed.
For all three Mac App Store releases, the partition to be installed on had to be GUID partition formatted according to Apple Disk Utility.

How to sort this error - he Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance

Just purchased a MacBook Pro but had to reinstall OS X but now when I try to install anything I get the following message - The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update. Post the log text, please, not a screenshot.
If there are runs of runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.

Any application I install on my MacBook Pro gives the message "The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance" What can I do?

Any application I install on my MacBook Pro gives the message "The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance" What can I do?

Well that's one. Try the Microsoft help forums: http://www.microsoft.com/mac/support It's their application.
Name another.

HT5022 When I tried installing this software, I get this error: "The installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance." Any idea why? My computer is Mac OS X Version 10.7.5

When I tried installing this software, I get this error: "The installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance." Any idea why? My computer is Mac OS X Version 10.7.5

What software are you trying to install?

Nach Installation Fehlermeldung..für Schlüssel\Software\MozillaPlugins\.. keine Berechtigung

Similar Messages

Maybe you are looking for