Nagios Monitoring tool in Solaris 10 or 9 (NRPE error.....).

Hi Experts
I had configured Nagios in Redhat linux everthing is working smoothly
My problem is i have Solaris 8,9,10 servers now i am installing NRPE in Solaris 10 to get the details of swap space & Machine load information all the compilation went smoothly. i compiled nrpe binaries every thing ran successfully
When i run the given below command i am getting connection refused by host.
bash-2.05# /usr/local/nagios/libexec/check_nrpe -H 127.0.0.1
Connection refused by host
Could any please help me on this
Thanks
kr

If you don't mind need configuration steps required how to install nrpe and configurations
thanks

Similar Messages

  • Suggest a good free monitoring tools

    Hi Folks,
    Please suggest a good free monitoring tools like big brother, hobbit. Only for solaris servers. it should be easy to configure.

    For system resource checking,
    - prstat
    - sar
    - iostat
    - zpool iostat ( if the filesystem is ZFS )
    - mdb ( Memory check)
    example) echo ::memstat | mdb -k
    I assume all free tools are from the commands above.
    Hope it helps.
    Cheers,

  • Nagios monitoring SAP systems

    Dear Sir or Madam,
    I have RHEL 6.2  with Nagios 3 and I wanted to monitored my SAP systems. I downloaded from SAP Website the  SAP NW RFC SDK 7.20. I used the SAPCAR to unzip the file. Do I need to compile something to install the  RFC on my server?
    Do you have some information about how to connect monitoring tools like Nagios with SAP systems?
    Thank you in advance.

    Hi Eric,
    you can use dpmon to check the state of the workprocesses. For example, if they are in PRIV mode, new users won't be able to logon, although on OS level all processes are running fine ...
    For J2EE you would have to use jcmon to monitor your instance...
    Thanks,
      Hannes

  • Good Network Monitoring Tool

    Hello All,
    I work in a network that is poorly managed. Really POORLY MANAGED (9 sites, no documentation, disatater recovery no backup). The new mangers are doing their best to clean up the network.
    What is the best monitoring tool in the market other that Solarwinds?
    Regards
    Mike

    Well first thing is to generate some sort of layout or inventory. There was a good thread on how to do that over on Solarwinds' Thwack user forum earlier this year. It's not SolarWinds-specific so have a look there for starters.
    Once you've bounded your problem you can make a more informed decision with respect to tools to use going forward. For instance, if it's all Cisco, Prime LMS is a great tool. For small Cisco networks, Cisco Network Assistant and Cisco Configuration Professional offer some nice (and free) capabilities. For multivendor shops, SolarWinds Orion family (NPM, NTA, etc.) and IPSwitch What's Up Gold are two commonly used commercial products. If you're a bit Linux-savvy, you can pretty easily deploy a set of open-source tools (Nagios, Cacti and RANCID for fault, performance and configuration management respectively).
    With the exception of SolarWinds, the above are primaily network-focused. If you want to add servers and applicaitons, that's a bigger discussion.

  • OEM vs other monitoring tools (Solarwinds)

    Can someone tell me the advantages of using OEM 12c as a monitoring tool over the Solarwinds product for Solaris systems?  I know OEM will also give management capabilities for databases, but strictly from a monitoring perspective will OEM catch things (hardware or software) that Solarwinds will not? 

    Enterprise Manager 12c has numerous plugins and features that are not offered by the Solarwinds products.  EM12c is engineered to work with all of Oracle's products and works seamlessly to provide value where misc. products that cover one or two areas must have each data brought together in a third tool in attempts to solve issues and provide a full picture of the IT infrastructure.  I would contact your Oracle Sales rep to get a the best comparison to ensure you make the decision that will provide the most value for your company.
    Thank you,
    Kellyn

  • Monitoring tool for SunFire V210

    Hello,
    We are running a couple of SunFire V210. These servers are doing their job and we never have to touch them, this is the main reason why we have no expertise on these servers.
    One of the servers indicators is actually yellow, so I reckon I must have some Hardware issue with it. Is there any monitoring tool available on Solaris to perform a diagnostic (equivalent od Dell OpenManage on Dell server)?
    Thanks a lot for your time.
    Fred

    There is no "best" monitoring tool for AS. It all depends on what your shop is using currently for monitoring of other servers / services. You could monitor your AS using AS Control, but it doesn't send you any alerts etc. OEM might be a good choice, but not if you have to install (and but) it for one server etc. etc.

  • Oracle EPM 11.1.2.1 Monitoring tools

    Gurus,
    could you please let me know what are the available system monitoring or performance monitoring tools for oracle EPM 11.1.2.1 or in case licenses are involved what are the best key areas for manual procedures to monitor the system?
    Many thanks !

    Hello,
    Monitoring is a broad term. There are many 3rd party tools available that can provide monitoring, it all depends on what exactly you're looking for.
    Oracle has a document on setting up Oracle Enterprise Manager to monitor Hyperion Applications: http://www.oracle.com/technetwork/middleware/bi-foundation/sys9-oem-integration-1-129287.pdf. For performance monitoring, you can also look at this: https://blogs.oracle.com/pa/entry/epm_11_1_2_how3. This will basically connect to the JRockit JVM and look at the performance for the web application.
    If you want to do more monitoring (services, servers, processor, CPU), you can look into Hyperic HQ: http://www.hyperic.com/. They have both an open source version and an enterprise version. I've used the open source version myself and it is pretty good and plays well with Windows. You can see many metrics, graphics and information via the web based application. You can also setup email alerts on certain activities (service stop, service start) and also monitor website availability. For being an open source software, I think it offers alot and it is very reliable.
    Again, these are just a few suggestions. There are many tools out there that can accomplish what you're looking for.
    Regards,
    Luis

  • Where can i check in the real time monitoring tool if there are active calls in progress?

    where can i check in the real time monitoring tool if there are active calls in progress? 

    Hi
    Selecting Call Manager -->Call Process ---> call activity
    HTH
    Regards
    Carlo

  • Please suggest DB monitoring tool

    Our DB have some performance issues, I need your suggestions to buy a DB monitoring tool to help us to resolve these problems.
    If you can share your experiences on the tool, it will be the best.

    Hi,
    We don't have enough knowledge on DB.In that case, beware of tools that make recommendations that you cannot understand . . .
    Some advanced monitoring tools can be cryptic for beginners.
    Is OEM or Statspack suitable to a beginner? Beware, the OEM diagnostic pack and the OEM performance pack are really expensive, over $6,000 per seat:
    http://www.dba-oracle.com/news_tuning_packs_price.htm
    Plus, consider 3rd party tuining tools.
    Historically, Oracle tools have had a bad reputation, and Oracle's Oracle Expert tool was widely criticized for making ridiculous tuning recommendations . .
    Everybody has a monitoring tool to plug, I even have a few that I wrote myself.
    There are a zilllion of them, but they all offer test drives, but try to find:
    - A monitoring tool that makes recommendations in plain English
    - A tool that is reasonably priced
    - A tool from a well-know vendor with a good track record
    Lastly, if you are not familiar with Oracle tuning, it may be better and cheaper to buy an Oracle health check.
    A guru can find tuning problems in just a few hours, faster and more efficient that using a tuning tool.
    Hope this helps . . .
    Donald K. Burleson
    Oracle Press author
    Author of "Oracle Tuning: The Definitive Reference"
    http://www.rampant-books.com/t_oracle_tuning_book.htm
    "Time flies like an arrow; Fruit flies like a banana".

  • Messages are Holding in message monitoring tool

    Hi All,
    I am facing the problem with messages which are in holding state.
    My scenario is file to proxy. The file content contains of EDI. my scenario is already gone to production last year.
    and its working fine. Used java mappings for validation of EDI file. its running successfully.
    where as in Dev system till october first i used to load the files in FTP inbox folder and messages were processed successfully.
    But from october first week when i load the files in FTP inbox, file has been picking succesfully and can see the logs in sender comm channel  but the i can see that my interface is in holding state in message monitoring tool and its not going to receiver comm channel. I have loaded 5 files and all are in holding state. 
    even i have cancelled first error message and tried to resend the next message swhich is in holding state, but this is not happening.
    i am using EOIO queue.
    when i cancel the error message remaining messages should processed automatically but its not getting processed here.
    sequencing of the interface triggering is
    1. Interface_1
    2. Interface_2
    3. Interface_3
    4. Interface_4
    Here i am stucking up with the first interface itself.Here only first interface is in holding state.
    can any one advise what could be the problem..
    I m on SP 10.
    Thanks,
    Bhaskar

    Hi Abhijit,
    Even after unchecking the checkbox maintain order at runtime, its not working.
    i think there is no disturbed in message processing sequence.
    my first sender interface itself going into hold state.
    i have cancelled the hold message, even after that remaining messages are processing automatically.
    and also i could not fine any messages in SMQ1 and SMQ2.
    I also deresister and registered te queues and activated.
    Kindly advise what would be the problem..
    in production its working fine and development its not working fine.
    Thanks,
    Bhaskar

  • Monitoring Tool for Monitoring Business Process

    Hi All,
    Is there any monitoring tool which is able to monitor various technologies .
    we are integrating biztalk with SAP and we are looking for a tool which we can use to monitor both, is there any?
    Praj Dixit

    Hi All,
    Is there any monitoring tool which is able to monitor various technologies .
    we are integrating biztalk with SAP and we are looking for a tool which we can use to monitor both, is there any?
    Praj Dixit
    If if want just to monitor various technologies, lets say BizTalk, then there are lot of tools available for this. BizTalk 360 and SCOM are two main tools.
    similarly if you want to monitor SAP- like availbility of SAP services/URLS/Databases etc, then HP OpenView can be one option.
    However, if you just want to make sure your business process ( integrated BizTalk/SAP..etc) are up and running then you could write some Automated Smoke test scripts, which will perform some basic testing and make sure all components are up and running. 
    Hope this helps. 
    Greetings,HTH
    Naushad Alam
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or
    Mark As Answer
    alamnaushad.wordpress.com

  • What is Business Process Monitoring Tool (BPMT)?

    Dear colleagues
    There is also a strange tool named Business Process Monitoring Tool (BPMT), provided as an Add-on installation within SAP Netweaver 701 SP06
    [Note 1453759 - BPMT 701 Business Process Monitoring Tool: Installation|https://service.sap.com/sap/support/notes/1453759]
    What is it, and how it is connected with SAP NW BPM?
    Any explanation would be much appreciated

    Hi,
    this tool is to provide a business process monitoring within the ABAP stack. So you're able to get information about "how many processes of process X have not been finished, yet". This is based on several agents listening to the business process implementations (e.g. SAP Business Workflow) and provides those generated events to a monitoring engine.
    As far as I know this component has not been released, yet. I don't know the delivery date (maybe in QII or QIII 2011) --> who know's?
    Cheers
    Martin

  • GUI Tools in solaris 8

    Dear Sir
    I want to know that have GUI admin tools in solaris 8 ? For example add use, admin, disk managerment
    Thanks
    John

    Hi
    I cn't this b'coz customer didn't able to give the solution this one whether it is working fine or not from very first time
    this eeprom output
    keyboard-click?=false
    keymap: data not available.
    ttyb-rts-dtr-off=false
    ttyb-ignore-cd=true
    ttya-rts-dtr-off=false
    ttya-ignore-cd=true
    ttyb-mode=9600,8,n,1,-
    ttya-mode=9600,8,n,1,-
    pcia-probe-list=1,2
    pcib-probe-list=1,3,2,4,5
    enclosure-type=540-4284
    banner-name=Sun Enterprise 220R
    energystar-enabled?=false
    mfg-mode=off
    diag-level=min
    #power-cycles=72
    system-board-serial#=5015606185164
    system-board-date=3d202135
    fcode-debug?=false
    output-device=screen
    input-device=keyboard
    load-base=16384
    boot-command=boot
    auto-boot?=true
    watchdog-reboot?=false
    diag-file: data not available.
    diag-device=net
    boot-file: data not available.
    boot-device=disk:a disk net
    local-mac-address?=false
    ansi-terminal?=true
    screen-#columns=80
    screen-#rows=34
    silent-mode?=false
    use-nvramrc?=false
    nvramrc: data not available.
    security-mode=none
    security-password: data not available.
    security-#badlogins=0
    oem-logo: data not available.
    oem-logo?=false
    oem-banner: data not available.
    oem-banner?=false
    hardware-revision: data not available.
    last-hardware-update: data not available.
    diag-switch?=false
    yes keyboard and mouse are connected directly to server as well as they SUN keyboard & mouse
    With Regards

  • BEST DB MONITORING TOOL

    hai every body ,
    from your experience which is the best DB monitoring Tool ...?
    my purpose is to watch the activities(insertion,deletion,updation on which tables?)  when an application is working...
    or is there any other oracle supplied packages,which satisfies my purpose...?
    please specify to me...
    thanks in advance...
    john

    Hi John,
    which is the best DB monitoring Tool ...?For proactive monitoring, you cannot beat STATSPACK, all free . . . .
    For reactive monitoring, I like Quest Spotlight and Confio Ignite.
    my purpose is to watch the activities(insertion,deletion,updation on which tables?) when an application is working...That not monitoring, that's auditing!
    You can use LogMiner for free . . .
    Hope this helps . . .
    Donald K. Burleson
    Oracle Press author
    Author of "Oracle Tuning: The Definitive Reference"
    http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm

  • Best monitoring tool

    Well here we are, my application is ready for distribution,
    now i would like to know what is the best free monitoring
    tool for a coldfusion server?
    I found the metrics data in the coldfusion server, but i
    would like to have some more monitoring information for my
    resources, db load etc.
    any ideas?

    Regarding performance monitoring on your CF-server, are you
    running a multi-server configuration?
    If not, you can use the performance monitoring mechanism
    built into CFMX. Simply log into the CF-Administrator, and under
    "Debugging Settings", you'll find a checkbox waaaaay down at the
    bottom of the page which reads "Enable Performance Monitoring".
    Turn that on. What it actually does is tie directly into the
    Windows (NT) built-in performance monitor reporting tool.
    (This of course assumes you're hosting your CF-server on a
    WIndows box - which most people do)
    However, if you're running in a multi-server configuration,
    this performance monitoring option is no longer available to you I
    believe. Bruce Purcell has some good notes on the topic of
    performance monitoring on his blog here:
    http://www.bpurcell.org/blog/index.cfm?mode=entry&ENTRY=967
    Personally, I've found the JRun Metrics service to be
    invaluable. It is one of the only built-in options for performance
    monitoring that ColdFusion offers for a multi-server environment as
    far as I know.
    Regarding your DB server, that is an entirely different topic
    (unrelated to ColdFusion). You should contact your DBMS vendor for
    more information on that.

Maybe you are looking for