NAM-2

Hi everyone
The module NAM-2 for 6500 uses an internal or external database to create the historical reports up to 100 days ?
I think is internal but I like to recheck ...
Thanks in Advanced
Andre Lomonaco

I have NAM-2 installed in 6500 chasis.some times It does not analyse the traffic and shows the error msg "error communicating with RMon daemon". The issue rsolves by reseting the module but not always.
device details:
NAM application image version: 4.0(1a)
Maintenance image version: 2.1(5)
NAM Daughter Card Micro code version: 1.34.1.28 (NAM)
BIOS Version: 4.0-Rel 6.0.9
PID: WS-SVC-NAM-2-250S
Memory size: 2048MB
Disk size: 250GB
Installed patches:
No patches are installed on this system.
Please help.

Similar Messages

Wat is the use of "DATA var-name LIKE SY-INDEX" statement

Hi to all,
       is there any use of "DATA <var-name> LIKE SY-INDEX" statement in ABAP, do the variable <var-name> be changed with that of SY-INDEX when we declare like this.
         Could u give me a fast response,
                                        Thank you,
                                             Srinivasa Rao k.

hi check this example..
data: v_index type sy-index value 10 .
do 15 times .
if sy-index = v_index .
write:/ 'the system index is 10 '.
exit.
endif.
enddo.
the main use of the index is used in the hr programs..
the user wants the emp salary and previous months   salary then you need to use the index .
if the table had 10 records .then you need to catch the record of index1(current) and index 2(for previous month)..
select pernr ansal from pa0008 into table it_pa0008 where pernr in s_pernr and begda in s_begda .
loop at it_pa0008.
case sytabix.
when 1 .
it_final-cursal = it_pa0008-ansal.
when 2 .
it_final-prevsal = it_pa0008-ansal.
endcase .
endloop.
regards,
venkat.

Company Name not getting Displayed in the incoming screen

I changed my blackberry from earlier 0S 7 to Z10 two days ago, but to my surprise it is not displaying company name in the incoming call screen. I have more than 20 people whose name is repeating and not able to identify, how come this feature is not available in the new model, what is solution ?

@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay

Trying to delete file from trash but get this: The operation can't be completed because the item "File name" is in use. All other files delete except this one. Please help

Trying to delete file from trash but get this: The operation can’t be completed because the item “File name” is in use. All other files delete except this one. Please help

Maybe some help here:
http://osxdaily.com/2012/07/19/force-empty-trash-in-mac-os-x-when-file-is-locked -or-in-use//

When I login I get a message "aosnotifyd wants to use your confidential information stored in "my name" in your keychain." How do I know if it is safe to allow this? Can anyone advise please?

Every time I login I get the message "aosnotifyd wants to use your confidential information stored in "my name" in your keychain." How do I know if it is safe to allow this? Can anyone advise please?

My immediate reaction is to deny.
Have you downloaded or installed any application that may relate to the abbreviation AOS? It may not necessarily be the application's name, could be the developer or distributor.
As it's occuring at log-in, go to System Preferences > Accounts > your account > Login Items and look for a related item. If there's one there, right-click (or ctrl click) on it and select Reveal in Finder. That will show you where the originator of the item is on your system and should give you more of a clue as to what it is.
I'd remove the item from login items anyway (highlight and click the minus sign at the bottom of the window). There shouldn't be anything trying to use your keychain info to notify anyone.

Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name:                          APPCRASH
Application Name:                             iTunes.exe
Application Version:                           10.3.1.55
Application Timestamp:                    4deec351
Fault Module Name:                          ntdll.dll
Fault Module Version:                        6.1.7601.17514
Fault Module Timestamp:                 4ce7ba58
Exception Code:                                  c0000005
Exception Offset:                                0002e3fb
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?

I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button.

Hi Apple support, my name is Derek Turner and I have been hacked through a friend's email account and I wish to know if 1. I can clean my email list of names and account with software and 2. How is it possible to delete emails that are still coming back

Hi! My name is Derek Turner and I have been hacked through a friend's email message to me which I opened unsuspecting any danger. Initially, he sent me an 'attention' or warning email with a link which I tried to open but it could not be opened, so I left it not knowing what it was all about at the time. Later, I received another email from him (probably the hacker) and opened a 'not very pleasant' web site. It did not twig with me at the time as I am a bit new to this type of thing but when I mentioned it to my wife she immediately said that I had been 'hacked'. By this time it was too late, and it infected all my email addresses! I would be grateful if you may know if there is software that I can use to clean up my email account and if there is anything for iPad minis that can prevent this happening in future? (Malware, Firewall?). I am also getting emails back that relate to the hacker and I cannot 'delete' them from my iPad, only on my PC! Any suggestions?
Thank you for your time regarding this matter,
Derek Turner,( a very new iPad mini user!)

Hi,
I don't think that can be solved by any advice the regular posters could post here.
I would go back to Apple and explain the situation (again).
I would also consider closing the account (Apple rarely seem to do this as accounts are never deleted but just closed).
I understand this may cause issues for things purchased in iTunes and the App Store which my include Restoring the OS at some point.
8:20 pm Tuesday; September 16, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Supress Vendor name in std report S_ALR_87012103 - Vendors: Items

Hi ,
I am using report 'S_ALR_87012103 - Vendors: Items -> List of Vendor Line Items' to list the vendor open items and in the output the vendor name with address is displayed, I want to supress name and address so that when I download to excel it will easier for me to change the columns.
Than

Try using FBL1N instead of this report, which does not show address.
Regards,
SDNer

Report handling names with a single quote

Report 10gR2
I have created a report and most of the functionality that i want is working as expected.
I have a report where i am letting user enter their first name on one field and last name on another field in the parameter screen ( thats how it's stored in the database)
If they enter any name with an aphostrophe , say D'Costa ( either first name or last name)
then i get the below error
REP-50003: Bad parameter: pfaction=http://.........
I am using like keyword as seen below in the afterparam trigger and passing the parameter :p_where_last_name to the main sql query
:p_where_last_name := ' AND UPPER( :last_name) LIKE (' ||''''||'%'||UPPER(:last_name)||'%'||''''||')' ;
Whats the best approach to handle this issue
Also is there a way to capture this error
' REP-50003: Bad parameter: pfaction=http://.........
' and display a message, if so where and how, please advise.
thanks.
Edited by: Forms_Reports_Beginner on Aug 13, 2009 1:52 PM

I am not using form , it's just done in report, that is i am not calling the report from a form , just from a menu.
:last_name is a report_paramter that i created on the report.
you're right the first assignmnt is
AND UPPER( db column) LIKE
I have a paramter form on the report with a field last name and I am letting the user enter last name there which gets stored in the :last_name
Edited by: Forms_Reports_Beginner on Aug 14, 2009 7:29 AM
Edited by: Forms_Reports_Beginner on Aug 14, 2009 7:32 AM
Rodolfo,
your solution works,
:p_where_clause := ' AND UPPER( db_column ) LIKE (' ||''''||'%'||UPPER(Replace(:p_2,chr(39), chr(39)||chr(39)))||'%'||''''||')' ;
but i dont quite understand how this is working
Replace(:p_2,chr(39), chr(39)||chr(39))
i have never used chr
Edited by: Forms_Reports_Beginner on Aug 14, 2009 7:35 AM

Follow up - DNS (internal domain has same name as external website)

Hi,
I am following up with on previous blog entry about resolving an domain internal name to an external website found here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4d97325b-ff3a-4f46-ba6e-dc3f4ff978e1/dns-internal-domain-has-same-name-as-external-website
On October 30, 2014
HayashiTech provided a response suggesting the use of netsh interface portproxy on the DC's to resolve this issue. There has been no feedback to this suggestion and I am very curious what opinions are out there for this suggestion as it appears to be the
best option provided yet.
Thank you in advance as well for all the great guidance I have found provided by Ace and his followers.

Interesting question. I've not seen that solution before, but having done a test on my lab setup it certainly seems to work as expected. Eg, using :
netsh interface portproxy add v4tov4 listenport=80 listenaddress=dc1.abc.com connectport=80 connectaddress=www.abc.com
on my DC where I've setup a working external domain name with the www record pointing to the website, and the non-www record pointing to the DC, requests to the non-www address are successfully being redirected to the www address (after confirming it didn't
happen prior to adding the portproxy).
So on the face of it that does look like a workable solution. I haven't used it myself in anger obviously, but the two downsides I can think of immediately to this solution are :
1) This operates as a proxy, so unlike the IIS method that Ace mentioned where it would tell the client to go to the www address instead (so the client connects direct), this method keeps your DC acting as a middle man, eg all communications to that address
go through your DC rather than direct from the client to the website. Depending on what they're doing on the website this may or may not be an issue for you.
2) Since the client is continuing to connect to the DC throughout, if you ever did need the have something on the DC responding to port 80 then you could have issues. That said, according to
https://technet.microsoft.com/en-us/library/cc731068(v=ws.10).aspx the portproxy listenaddress can be a FQDN rather than IP, so that could mitigate any issues there.

How to rename C00n generic column names in a Dynamic SQL report

I have a an interface whereby the user can select 1 to 60 (upper limit) columns out of 90 possible columns (using a shuttle) from one table before running a report.
To construct the SQL that will eventually execute, I'm using a "PLSQL function body returning SQL query" with dynamic SQL. The only problem is that I have to use "Generic Column Names" option to be able to compile the code and end up with c001 to c060 as the column names.
How can I use the names of the selected columns as the report headings rather than c001, C002... etc?
I do not know beforehand which columns, or how many columns or the order of the selected columns.
I know Denes K has a demo called Pick Columns but I can't access his code. I have a hunch though that he may be just using conditions to hide/show the apropriate columns.
thanks in advance
PaulP

Hi Paul
I would change the Heading Type in the Report Details screen to PLSQL and use the shuttle item to return the column values. e.g.
RETURN :p1_shuttle;
I'm assuming the shuttle already has a colon separated list of the column headings in the correct order?
I hope that helps
Shunt

GR/IR: Open receipts with vendor name

Hello SAP Gurus-
I am not sure if we are doing something wrong but we are currently reconciling our GR/IR account and what we noticed is that when we added the vendor name to the report with the help of an OSS note, we noticed that it gives us all transactions that make up the balance however it isn't what we wanted exactly.
What we were looking for was once we execute MR11 and handle all differences, we want to see only open receipts with the Vendor name. How can we achieve this? Is there a report? Should the GR/IR account be set up as a clearing account?
Any help/ insight is greatly appreciated!

figured it out

Discoverer Report Names

Discoverer Report Naming
Our service Provider has created lot many reports for us and now theres a need for a generic naming to be followed for the Discoverer reports. Could someone tell me how difficult it would be to rename all the reports?
As I could see, theres a dataitem for the Discoverer Report names, I would imagine the report names are somewhere stored in the database as values in a DB table. So if the name of the report is stored in the database in a table , then it is simpler enough to change the value of the column. It would be more of a find and replace command in SQL.But I'm not sure whether this would have an impact on the actual Report name! for our service provider is telling us that they need to open every report in Discovere to rename and store it. Then they need to delete the other report- which I doubt as I'm not sure !
Also I would like to know where and how the names of the Discoverer Reports are saved in the database?
Kindly advice.Many thanks

Hi,
You can inform to your SP to edit the table EUL4_documents
and ask him to modify the name of the report that is stored in the column DOC_NAME .There is absolutely no necessary to open the work book that is stored in the database and change the work book name
Regards
Swamy!

Discoverer Report: How to find Business Area name from Report Name.

Hi
I opened a report in Disco Desktop 4 -> Resonsibiolity --> Report Name.
So I know Report name but don’t know which Business Area it belongs to.
How to find Business Area Name from Report Name?
Cheers
Vijay

Hi,
There is no relationship between reports and business areas. Each report can be built from many folders. Each folder can be in many business areas.
However you can try the following SQL which may give you the result you want for an v5 EUL. You will have to modify for Discoverer 4 EUL:
select distinct doc_name, obj.obj_name folder_name, bas.ba_name
from eul_us.eul5_documents doc
, eul_us.eul5_elem_xrefs xref
, eul_us.eul5_expressions exp
, eul_us.eul5_objs obj
, eul_us.eul5_ba_obj_links bol
, eul_us.eul5_bas bas
where xref.ex_from_id = doc.doc_id
and doc.doc_name = &your_report
and xref.ex_to_id = exp.exp_id
and obj.obj_id = exp.it_obj_id
and bol.bol_obj_id = obj.obj_id
and bas.ba_id = bol.bol_ba_id
Rod West

Unable open Project details or a project from PWA Project server 2010 with Alias name

Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx)
its is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
can any one Help me.
vijay kommireddi

Hi Eric,
Thanks for your Reply.
As you said i have added in Manged Path as (Testpwa/projects.aspx as <Wildcard inclusion>) But still problem is there it is asking user
name password again if click on any project in project center and and showing page cannot be displayed error.
This is url its is showing in the below of the IE ( http://def.ad.com/testpwa/projectdrilldown.aspx?ProjUid=e28c6d43-85b6-478d-9542-2961cc81a69e)
I have observed one more thing if click on Project
details then only this issue is coming project schedule and project information
is also opening with Alias name.
My farm version is 14.0.7015.1000
Vijay Kommireddi

The name "Folder" does not exist in the namespace

I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
I am using Visual studio 2013. As I work through the example I am getting the following error.
Error 1
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
11 17
FolderExplorer
Error 2
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
16 7
FolderExplorer
Here is the code:
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:my="clr-namespace:FolderExplorer"
Title="Folder Explorer" Height="350" Width="525">
<Window.Resources>
<ObjectDataProvider x:Key="RootFolderDataProvider" >
<ObjectDataProvider.ObjectInstance>
<my:Folder FullPath="C:\"/>
</ObjectDataProvider.ObjectInstance>
</ObjectDataProvider>
<HierarchicalDataTemplate
DataType = "{x:Type my:Folder}"
ItemsSource = "{Binding Path=SubFolders}">
<TextBlock Text="{Binding Path=Name}" />
</HierarchicalDataTemplate>
</Window.Resources>
I have a class file named Folder.vb with this code.
Public Class Folder
Private _folder As DirectoryInfo
Private _subFolders As ObservableCollection(Of Folder)
Private _files As ObservableCollection(Of FileInfo)
Public Sub New()
Me.FullPath = "c:\"
End Sub 'New
Public ReadOnly Property Name() As String
Get
Return Me._folder.Name
End Get
End Property
Public Property FullPath() As String
Get
Return Me._folder.FullName
End Get
Set(value As String)
If Directory.Exists(value) Then
Me._folder = New DirectoryInfo(value)
Else
Throw New ArgumentException("must exist", "fullPath")
End If
End Set
End Property
ReadOnly Property Files() As ObservableCollection(Of FileInfo)
Get
If Me._files Is Nothing Then
Me._files = New ObservableCollection(Of FileInfo)
Dim fi As FileInfo() = Me._folder.GetFiles()
Dim i As Integer
For i = 0 To fi.Length - 1
Me._files.Add(fi(i))
Next i
End If
Return Me._files
End Get
End Property
ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
Get
If Me._subFolders Is Nothing Then
Try
Me._subFolders = New ObservableCollection(Of Folder)
Dim di As DirectoryInfo() = Me._folder.GetDirectories()
Dim i As Integer
For i = 0 To di.Length - 1
Dim newFolder As New Folder()
newFolder.FullPath = di(i).FullName
Me._subFolders.Add(newFolder)
Next i
Catch ex As Exception
System.Diagnostics.Trace.WriteLine(ex.Message)
End Try
End If
Return Me._subFolders
End Get
End Property
End Class
Can someone explain what is happening.
Thanks Hal

Did you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
xmlns:my="clr-namespace:FolderExplorer"
The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

NAM-2

Similar Messages

Maybe you are looking for