NAM Upgrade from 3.6(1b) to 4.0 or 4.2
Dear All
I followed the instruction from the Document "Cisco Branch Router Series (NME-NAM) Installation and Configuration Note, 4.2" and the URL is "
http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/4.2/branch_router/configuration/guide/BRincfg_42.html"
to upgrade the NAM application software. I got the error message (in RED):
Download NAM application image via tftp and write to HDD
server IP address [10.20.254.35]:
full pathname of application image []: nam-app-x86_32.4-2-1.bin.gz
Getting nam-app-x86_32.4-2-1.bin.gz from 10.20.254.35 via tftp.
tftp> tftp> tftp>
zcat: stdout: No space left on device
upgrade.bin size: 73474048
File transfer successful.
Checking upgrade.bin
bad magic number.
bad magic number.
File upgrade.bin is not a valid NM-NAM application image!
The error message seems to me I do NOT have enough space to download the NAM application image, but I could be wrong. However I shall have enough space on the HDD to save the image file.
My equpiment details are below:
Cisco 3845 (revision 1.0) with 477183K/47104K bytes of memory.
Processor board ID FHK1318F04P
3 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
1 cisco Integrated Service Engine(s)
Network Analysis Module (NME-NAM) 3.6(1b)
in slot 4
DRAM configuration is 64 bits wide with parity enabled.
479K bytes of NVRAM.
126976K bytes of ATA System CompactFlash (Read/Write)
Configuration register is 0x2102
Cisco IOS Software, 3800 Software (C3845-ADVIPSERVICESK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)
NAME: "Integrated Service Engine for Modular and Integrated Services Routers on Slot 4", DESCR: "Integrated Service Engine for Modul
ar and Integrated Services Routers"
PID: NME-NAM-120S , VID: V01 , SN: FOC125172K8
Please help.......Thank in advance..
Kelvin Cheung
I was running into the same issue, I believe this has something to do with the way tftp works on this device. When I copied the application binary to an FTP server and downloaded onto the device the process completed successfully:
Download NAM application image via ftp and reformat & write to HDD
URL of application image [ftp://[email protected]/home/mikew/nm-nam/nam-app.4-0-1.bin.gz]: ftp://[email protected]/home/mikew/nm-nam/nam-app-x86_32.4-0-1a.bin.gz
Getting ftp://[email protected]/home/mikew/nm-nam/nam-app-x86_32.4-0-1a.bin.gz.
Password for [email protected]:
ftp://[email protected]/home/mikew/nm-nam/nam-app-x86_32.4-0-1a.bin.gz (84797K)
- [########################] 84797K | 1533.20K/s
86832713 bytes transferred in 55.31 sec (1533.20k/sec)
upgrade.bin size: 88250390
File transfer successful.
Checking upgrade.bin
Do you want to proceed installing it? [y/N] yInitializing the hard disk. This process may take several minutes...Applying the image, this process may take several minutes...Performing post install, please wait...
Application image upgrade complete. You can boot the image now.
==============================================================================
Cisco Systems, Inc.
Services engine helper utility for NM-NAM
Version 1.1(1b) [200806251439]
NAM appliation version: 4.0(1a)
Flash helper image: nm-nam-helper.1-1-1b
Similar Messages
-
Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without fouling everything up?
Ok, well you'll need to do something like this. Now this part is a little dependent on your database server:
try {
Class.forName("org.gjt.mm.mysql.Driver").newInstance();
Connection c = DriverManager.getConnection(
"jdbc:mysql://{database-server}/{database-name}:3306?user={username}&password={password}");
Statement Stmt = c.createStatement();
int count = Stmt.executeUpdate(cmd);
if(count>0) {
System.out.println("count: " + count);
} catch (Exception e) {
e.printStackTrace();
}That was some sample code for a MySQL database.
Note that the applet can only contact the server that is was loaded from, so you might want to do a getCodeBase() or something like that to get the server address.
Hope this is helpful. -
Upgrade from Oracle 9.2.0.4 to 9.2.0.8 changes LIBCLNTSHR library name
I am trying to upgrade Oracle 9.2.0.4 to 9.2.0.8 on Open VMS 7.3-1 running on an alpha ES40. The upgrade changes the LIBCLNTSHR library to use
the install ID in the library name and logicals that point to the library. My problem is related to the fact that I have two alphas, one for development and one for production. All application source code is stored on the development alpha where it is compiled and linked. The executable is then copied to the production alpha. The problem occurs when trying to run the executable. The following error occurs:
%DCL-W-ACTIMAGE, error activating image LIBCLNTSH_815363518
-CLI-E-IMAGEFNF, image file not found DSA0:[SYS0.SYSCOMMON.][SYSLIB]LIBCLNTSH_815363518.EXE;
This occurs because the linstall ID is different on the two alphas and therefore the library name is different. I have found a possible work-around to this problem is to modify insoracle.com and remoracle.com so that the install ID is not used in building the logical names for LIBCLNTSHR. Also I copy LIBCLNTSHR_xxxxx.SO to LIBCLNTSHR.SO. These changes allow the copied executable to run on both alphas. I just want to make sure that these
modifications will not cause other problems. Has anybody run into this problem? Are there other solutions to this problem? Do you think my solution is OK to use? Will upgrading from 9.2.0.4 to 9.2.0.8 have any effect on database performance (positive or negative)?I completed the upgrade and experienced no problems with the LIBCLNTSHR library. Therefore my solution was valid.
-
Upgraded from MB to MB Pro - Change name?
I recently upgraded from a MB (white) to a MB Pro,
Luckily I had a FULL Time Capsule back-up... which worked perfectly... new MB Pro sucked up all my data/settings etc... COOL !
I'd now like to change my MB Pro's name from "My MacBook" to "My MacBook Pro"... is this possible?
ThanksThat was easy...
THANK YOU...
(Easy when you know how)
Major THANK YOU... -
Upgrade from firefox 3.6 to 4.0.
Every website that have my username & password asks me for this info. before letting me in.
Need a step by step solution for this.
Thanks.I, too had my book marks disappear when I upgraded to FF 4.0
I am now back and enjoying FF 3.6.17 (my original) yet I am still
without my book marks and am floundering trying to recoup.
Any help appreciated. If unable to see my book marks in the near
future I will definitely jump ship. It's too bad that FF people have
created this problem. I am mystified and disgusted with their actions. -
Slow table creation after upgrade from 10.2.0.3 to 11.2.0.1 using DBUA
I've recently completed a database upgrade from 10.2.0.3 to 11.2.0.1 using the DBUA.
I've since encountered a slowdown when running a script which drops and recreates a series of ~250 tables. The script normally runs in around 19 seconds. After the upgrade, the script requires ~2 minutes to run.
By chance has anyone encountered something similar?
The problem may be related to the behavior of an "after CREATE on schema" trigger which grants select privileges to a role through the use of a dbms_job call; between 10g and the database that was upgraded from 10G to 11g. Currently researching this angle.
I will be using the following table creation DDL for this abbreviated test case:
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA;When calling the above DDL, an "after CREATE on schema" trigger is fired which schedules a job to immediately run to grant select privilege to a role for the table which was just created:
create or replace
trigger select_grant
after CREATE on schema
declare
l_str varchar2(255);
l_job number;
begin
if ( ora_dict_obj_type = 'TABLE' ) then
l_str := 'execute immediate "grant select on ' ||
ora_dict_obj_name ||
' to select_role";';
dbms_job.submit( l_job, replace(l_str,'"','''') );
end if;
end;
{code}
Below I've included data on two separate test runs. The first is on the upgraded database and includes optimizer parameters and an abbreviated TKPROF. I've also, included the offending sys generate SQL which is not issued when the same test is run on a 10g environment that has been set up with a similar test case. The 10g test run's TKPROF is also included below.
The version of the database is 11.2.0.1.
These are the parameters relevant to the optimizer for the test run on the upgraded 11g SID:
{code}
SQL> show parameter optimizer
NAME TYPE VALUE
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.2.0.1
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
optimizer_use_invisible_indexes boolean FALSE
optimizer_use_pending_statistics boolean FALSE
optimizer_use_sql_plan_baselines boolean TRUE
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 8
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 03-11-2010 16:33
SYSSTATS_INFO DSTOP 03-11-2010 17:03
SYSSTATS_INFO FLAGS 0
SYSSTATS_MAIN CPUSPEEDNW 713.978495
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM 1565.746
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED 2310
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHR
13 rows selected.
{code}
Output from TKPROF on the 11g SID:
{code}
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 0 4 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 324
{code}
... large section omitted ...
Here is the performance hit portion of the TKPROF on the 11g SID:
{code}
SQL ID: fsbqktj5vw6n9
Plan Hash: 1443566277
select next_run_date, obj#, run_job, sch_job
from
(select decode(bitand(a.flags, 16384), 0, a.next_run_date,
a.last_enabled_time) next_run_date, a.obj# obj#,
decode(bitand(a.flags, 16384), 0, 0, 1) run_job, a.sch_job sch_job from
(select p.obj# obj#, p.flags flags, p.next_run_date next_run_date,
p.job_status job_status, p.class_oid class_oid, p.last_enabled_time
last_enabled_time, p.instance_id instance_id, 1 sch_job from
sys.scheduler$_job p where bitand(p.job_status, 3) = 1 and
((bitand(p.flags, 134217728 + 268435456) = 0) or
(bitand(p.job_status, 1024) <> 0)) and bitand(p.flags, 4096) = 0 and
p.instance_id is NULL and (p.class_oid is null or (p.class_oid is
not null and p.class_oid in (select b.obj# from sys.scheduler$_class b
where b.affinity is null))) UNION ALL select
q.obj#, q.flags, q.next_run_date, q.job_status, q.class_oid,
q.last_enabled_time, q.instance_id, 1 from sys.scheduler$_lightweight_job
q where bitand(q.job_status, 3) = 1 and ((bitand(q.flags, 134217728 +
268435456) = 0) or (bitand(q.job_status, 1024) <> 0)) and
bitand(q.flags, 4096) = 0 and q.instance_id is NULL and (q.class_oid
is null or (q.class_oid is not null and q.class_oid in (select
c.obj# from sys.scheduler$_class c where
c.affinity is null))) UNION ALL select j.job, 0,
from_tz(cast(j.next_date as timestamp), to_char(systimestamp,'TZH:TZM')
), 1, NULL, from_tz(cast(j.next_date as timestamp),
to_char(systimestamp,'TZH:TZM')), NULL, 0 from sys.job$ j where
(j.field1 is null or j.field1 = 0) and j.this_date is null) a order by
1) where rownum = 1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.47 0.47 0 9384 0 1
total 3 0.48 0.48 0 9384 0 1
Misses in library cache during parse: 1
Optimizer mode: CHOOSE
Parsing user id: SYS (recursive depth: 1)
Rows Row Source Operation
1 COUNT STOPKEY (cr=9384 pr=0 pw=0 time=0 us)
1 VIEW (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=6615380 card=194570)
1 SORT ORDER BY STOPKEY (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=11479630 card=194570)
194790 VIEW (cr=9384 pr=0 pw=0 time=537269 us cost=2563 size=11479630 card=194570)
194790 UNION-ALL (cr=9384 pr=0 pw=0 time=439235 us)
231 FILTER (cr=68 pr=0 pw=0 time=920 us)
231 TABLE ACCESS FULL SCHEDULER$_JOB (cr=66 pr=0 pw=0 time=690 us cost=19 size=13157 card=223)
1 TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=2 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
1 INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=1 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
0 FILTER (cr=3 pr=0 pw=0 time=0 us)
0 TABLE ACCESS FULL SCHEDULER$_LIGHTWEIGHT_JOB (cr=3 pr=0 pw=0 time=0 us cost=2 size=95 card=1)
0 TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=0 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
0 INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=0 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
194559 TABLE ACCESS FULL JOB$ (cr=9313 pr=0 pw=0 time=167294 us cost=2542 size=2529254 card=194558)
{code}
and the totals at the end of the TKPROF on the 11g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 2 0.00 0.00 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 3 0.00 0.00 0 0 4 0
Misses in library cache during parse: 1
Misses in library cache during execute: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 70 0.00 0.00 0 0 0 0
Execute 85 0.01 0.01 0 62 208 37
Fetch 49 0.48 0.49 0 9490 0 35
total 204 0.51 0.51 0 9552 208 72
Misses in library cache during parse: 5
Misses in library cache during execute: 3
35 user SQL statements in session.
53 internal SQL statements in session.
88 SQL statements in session.
Trace file: 11gSID_ora_17721.trc
Trace file compatibility: 11.1.0.7
Sort options: default
1 session in tracefile.
35 user SQL statements in trace file.
53 internal SQL statements in trace file.
88 SQL statements in trace file.
51 unique SQL statements in trace file.
1590 lines in trace file.
18 elapsed seconds in trace file.
{code}
The version of the database is 10.2.0.3.0.
These are the parameters relevant to the optimizer for the test run on the 10g SID:
{code}
SQL> show parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.3
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 8
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 09-24-2007 11:09
SYSSTATS_INFO DSTOP 09-24-2007 11:09
SYSSTATS_INFO FLAGS 1
SYSSTATS_MAIN CPUSPEEDNW 2110.16949
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHR
13 rows selected.
{code}
Now for the TKPROF of a mirrored test environment running on a 10G SID:
{code}
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 2 16 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.01 0.01 0 2 16 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 113
{code}
... large section omitted ...
Totals for the TKPROF on the 10g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.02 0 0 0 0
Execute 1 0.00 0.00 0 2 16 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.02 0 2 16 0
Misses in library cache during parse: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 65 0.01 0.01 0 1 32 0
Execute 84 0.04 0.09 20 90 272 35
Fetch 88 0.00 0.10 30 281 0 64
total 237 0.07 0.21 50 372 304 99
Misses in library cache during parse: 38
Misses in library cache during execute: 32
10 user SQL statements in session.
76 internal SQL statements in session.
86 SQL statements in session.
Trace file: 10gSID_ora_32003.trc
Trace file compatibility: 10.01.00
Sort options: default
1 session in tracefile.
10 user SQL statements in trace file.
76 internal SQL statements in trace file.
86 SQL statements in trace file.
43 unique SQL statements in trace file.
949 lines in trace file.
0 elapsed seconds in trace file.
{code}
Edited by: user8598842 on Mar 11, 2010 5:08 PMSo while this certainly isn't the most elegant of solutions, and most assuredly isn't in the realm of supported by Oracle...
I've used the DBMS_IJOB.DROP_USER_JOBS('username'); package to remove the 194558 orphaned job entries from the job$ table. Don't ask, I've no clue how they all got there; but I've prepared some evil looks to unleash upon certain developers tomorrow morning.
Not being able to reorganize the JOB$ table to free the now wasted ~67MB of space I've opted to create a new index on the JOB$ table to sidestep the full table scan.
CREATE INDEX SYS.JOB_F1_THIS_NEXT ON SYS.JOB$ (FIELD1, THIS_DATE, NEXT_DATE) TABLESPACE SYSTEM;The next option would be to try to find a way to grant the select privilege to the role without using the aforementioned "after CREATE on schema" trigger and dbms_job call. This method was adopted to cover situations in which a developer manually added a table directly to the database rather than using the provided scripts to recreate their test environment.
I assume that the following quote from the 11gR2 documentation is mistaken, and there is no such beast as "create or replace table" in 11g:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9003.htm#i2061306
"Dropping a table invalidates dependent objects and removes object privileges on the table. If you want to re-create the table, then you must regrant object privileges on the table, re-create the indexes, integrity constraints, and triggers for the table, and respecify its storage parameters. Truncating and replacing have none of these effects. Therefore, removing rows with the TRUNCATE statement or replacing the table with a *CREATE OR REPLACE TABLE* statement can be more efficient than dropping and re-creating a table." -
Upgrade from SAP Webas 6.40 to SAP Netweaver 2004s
Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?
Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?
-
Upgrade from 4.6C to ERP6.0 EHP4 NW7.01 fails on EHP_INCLUSION
Hello dear friends at SDN forums,
We are performing an upgrade from a 4.6C Non Unicode source release to a SAP ERP 6.0 EHP4 based on NW 7 EHP1 Non Unicode.
Every phase has gone more or less fine until the current phase EHP_INCLUSION in SAP EHPI tool.
We are trying to specify the stack file manually, cosu00B4 SAP EHPI does not find it automatically via RFC against Solution Manager. I donu00B4t discard a possible missconfiguration in the RFC destination "BACK" configuration (the one that points from our target system to the Solution Manager), but thatu00B4s another story.
Anyway, that shoulnu00B4t be relevant for the trouble Iu00B4m expressing.
As we are on source release 4.6C I must make use of the .txt stack file and not the .xml file, as per SAP notes.
The symptom: everytime I retry that EHP_INCLUSION phase, it complaints about "Sever errors detected. Error Code = -1. Reason: The stack configuration does not contain a product stack".
Iu00B4ll also paste here the contents of the EHP_INCLUSION.log trace file:
1 ETQ201 Entering upgrade-phase "EHP_INCLUSION" ("20100715150020")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
4 ETQ380 computing toolpath for request "TP_DEFAULT"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_OLD"
4 ETQ383 translates to path "D:\usr\sap\CES\SYS\exe\run"
4 ETQ383 translates to path "exe"
4 ETQ399 Set environment for standard connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=0
4 ETQ399 Set RFC variables for standard connect:
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Set tool parameters for standard connect:
4 ETQ399 default TPPARAM: DEFAULT.TPP
1 ETQ200 Executing actual phase 'PREP_EXTENSION/EHP_INCLUSION'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONEHP.DMP'
2 ETQ399 Arg[1] = 'NAVERSEHP.DMP'
2 ETQ399 Arg[2] = 'SPDA_EHP_INCLUSION.LOG'
2 ETQ399 Arg[3] = ''
2 ETQ730 Starting upload of all package files in "
dbapru001\sapmnt\trans\EPS\in"
4 ETQ010 Date & Time: 20100715150020
4 ETQ230 Starting RFC Login to: System = "CES", GwHost = "dbapru001", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CES", Nr="00", GwHost="dbapru001", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100715150024
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 EhP stack selection ...
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "C:\SMSDXML_CES.txt"
4 ETQ230 Starting RFC Login to: System = "CES", GwHost = "dbapru001", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CES", Nr="00", GwHost="dbapru001", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration does not contain a product stack")
That file was generated from Solman Mopz, was saved with a short path name just in case it could be problematic.
The Solman is on version NW 7 EHP1. Our 4.6C SPAM version is 50 (the latest available).
Iu00B4ve been fighting this issue for several days unsuccessfully, and it seems like thereu00B4s no documentation on it.
Iu00B4ve re-read SAP notes , master, EHP and upgrade guides several times, and also similar problems (but not exactly the same as mine) here at SDN forums.
Besides, now Iu00B4m having a problem to create customer messages to OSS which will last a few days (due an issue with our old installation number in SAP Service Marketplace). Thatu00B4s why Iu00B4m trying to obtain support from this forum, before we can obtain a response from SAP OSS.
Has anybody experienced something similar?
Thanks in advance for your help.
JavierHi FDK,
As far as I´m concerned, I promise I will write how we solved it when we get it.
The news are: at last we could create a customer message to SAP Support, and SAP has told us to:
1) Ensure that our Solution Manager is in a sufficiently high SP Stack level. In our case, as we have a Sol. Manager based on NW 7 EHP 1 with SP Stack level 20, they are asking us to apply SP Stack level 22 as first meassure.
2) In case we cannot afford to do the mentioned meassure immediately, then they suggest us another possibly working option: to downgrade our SPAM 4.6C from level 50 to 48. There is a SAP Note that explains how a reimport of a Support Package for SPAM can be done (and it seems like it´s even possible to downgrade the SPAM level, I didn´t know that):
SAP Note 684564: Re-importing a SPAM/SAINT update
So, now we are working on these suggestions. As the Solution Manager is really not "ours", but belongs to our SAP VAR (partner), we need to wait until they can schedule this technical task.
So, right now the immediate task I´m trying to perform is downgrading our SPAM 4.6C from level 50 to 48.
But, I have a problem and have just let know it to SAP in the customer message: I have no way to get such level 48 of SPAM 46C. SAP always only hosts the last (or the 2 most recent as much) version of SPAM in the Software Download Center of SAP Service Marketplace. Thus, right now if you navigate in SAP Service Marketplace you´ll only find the 50 level version of SPAM 4.6C. I´m again waiting for SAP ´s response concerning this.
Best regards,
Javier -
Does anyone know how to upgrade from 4.1 to 4.3 ios?
After being tricked by the fast talking smoothy helper at Apple store in London to buy a micky mouse ipodtouch (fourth generation) two years ago I am stuck at ios 4.1 and find that all the useful applications need 4.3 or more. So I went to the trouble of letting the macbook stay open all night to load yet another micky mouse version of itunes so that I can upload the more recent version of ios and now (since I don't want to continually have a lot of rubbish on the ipod I disabled the automatic sync "feature") I can only go round in circles whereby the only real possibility left is to turn on the autosync feature. I have had messages like "your ipod will be completely erased if you proceed" and "do you wish to fiddle another few days with this nasty system, then click on continue" and so on.
Does anyone know how to upgrade from 4.1 to 4.3 ios?
That would be great (maybe) because otherwise I will toss this children's waste product on the floor and set up my HD camera to show how easy it is to smash the brightly lit screen into pieces and relieve myself of trash which Apple sell to unsuspecting gullible humans who believe that they are not being tricked by such a nice company who produce shiny colourful gadgets which only work for a month or two before becoming 100% obsolete.
Great to hear from those who have wasted many months of their lives and discovered how to trick the system into doing a simple update operation!
I am insulted by the tricks that fool many and that apple pretend are "necessary".
Germany 2014 01 11 16 19 27Illaass, your help is amazing - miles better than anyone working in this part of the world who is paid - and you do this for free - because, like me, you LOVE to help people!
BUT, as I said above -
1. There is nothing "mobile" under Application Support. For whatever reason.
2. Devious - that Apple has set up iPod to not show in Finder - a red herring and sign that corruption is visible.
I will try iFunBox next and it sounds like they provide this for the more serious users but use a trivial name to excuse further strangeness.
After
There are purchased items on the iPod that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating the iPod. Are you sure you want to continue?
I get
Updating to iOS 6.1.5 will backup and restore the apps, media, contacts, notes, and settings on your iPod touch.
Please do not interrupt the update, which may take an hour or longer to complete.
Cancel Update
And then I wait for hours to arrive at the above mentioned
Backing up iPod \\\\\\\\\\\\\\\\\\\\\\\\\ Stop
and then as above
An error occurred while backing up this iPod (0xE8000084). Would you like to continue to update this iPod?
Continuing will result in the loss of all contents on this iPod.
Cancel Continue
and so we are back to where we always land - the user is left in the Apple designed sabotage situation which annoyed me so much initially.
"Most users will give up at this point, loose all the data or buy yet another disposable from Apple. Less than 3% will work their way to this site and 90% of the 3% will leave the iPod to gather dust in the hope that someone will help later. In all, Apple gains, since people blame themselves for "mistakes" which Apple programmed to throw out users who do not take the 100% Apple path. But Illaass and myself still play the game of "trying to fix" something which Apple don't allow." was the comment which I was going to write but decided against it, adding no value to the conversation other than explaining one reality which we all hoped could be wrong but which I thought to have a very high chance of being closer to the truth.
Apologies for my doubts towards the integrity of the creators.
2014 01 13 12 11 58 17
Recheck: Under Application Support "mobilesync" folder has appeared (MobileMeSyncClient has also appeared [while again trying to update iPod] with zero size) - Good news, a Backup file is there, but it is only 3GB while my iPod has 32GB and is close to full (800MB free space).
Latest at
2014 01 13 12 09 22
The iPod could not be restored. An unknown error occurred (9).
More Infomation OK
So it looks like I may have lost all the important pictures documenting various items all around Europe for the last two years - luckily I moved a year ago from the iPod toy camera to a Panasonic real camera with SD card which can be read on any computer. Hence important items lost may only be older than one year rather than the most recent items.
Glad I have changed to Panasonic since they don't try to screw you when you don't use their system.
I will now check the "more information" rather than just click on "OK" since I am of the 3% who "don't accept cr*p".
For full information I quote that the iPod now shows a screen with a USB ikon, an upward arrow and an iTunes ikon (all micky mouse language which reduces transparant, clear and technical discussion and thus covers the trail of "where things went wrong").
The iPod is still attached to the computer but the above MMTALK may mean that the iPod should be attached via USB to the mac. I record much of this activity on Video to be able to later prove EXACTLY what occurred, rather than having to rely on screenshots and opinions. We are after all dealing with important items which may later be required to be shown in court, as evidence against fraudsters.
The "More Information" link leads to
Resolve iOS update and restore errors in iTunes
which I have already seen before.
I clicked on OK and a help screen (unnamed as ever because no one like myself demanded that the help screens be named for later discussion) arrived:
You can help Apple improve its products a
while copying this into this message the computer began to start up Final Cut Pro and this was cancelled, then iTunes came up with a message:
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
ok
And I presume the earlier message about helping Apple is gone because I keep getting interrupted by this message called
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
ok
it has appeared now at least six times interferring with anything else I do. Each time I try to write, this message appears and blocks, but only when I write. I tried to do a carriage return and the message appeared taking the carriage return as acceptance of the OK in the
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
ok
Message. But since I have not removed the USB and keep returning to this message I am able to write for a few seconds (now 30 seconds or more) and the message remains on the screen but not blocking this conversation. It appears to be random but in fact as you can later see from the video, it is not reappearing each periodic number of seconds but as I reach a new comment.
I will try to close iTunes so that this can be stopped (I clicked on OK and it appeared another few times, each time I clicked on ok and now it has left me in peace to write here although iTunes is still not yet closed).
Difficult to log down all the strange behaviour but I think you can get the gist of what is going on.
2014 01 12 12 49 27
Should I remove the iPod and stop iTunes? I have a nasty feeling turning to indifference since I have video footage which will verify all the above in a court of law if later required. The truth must always win over any devious attempts at forcing people to do things they don't want to ;-)
2014 01 13 13 03 48 -
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]
Hi Deepak/Folks,
Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
SAP note 1862446 - Inventory
load failed... OPatch cannot load inventory for the given Oracle Home
and re-create the oracle inventory.
This has also not helped in anyway.
Is there a solution to this problem.
Following is the error that I am getting when I try to Install the patches
Getting pre-run patch inventory...
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory.
Refer to log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
when I open the log file specified here I get the following
more mopatch-2014_08_06-14-52-51.log
more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
Version: 2.1.15
Revision: 5.1.2.26
Command-line: /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
Oracle Home: /oracle/<SID>/11203
RDBMS version: 11.2.0.3.0
OPatch version:11.2.0.3.3
Clean-up: supported
PSUs: supported
Log file: $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
Patch base: .
Patch source: SAP11203P_1312-20009978.zip
Link script: ./link.mts<SID>ua.sh
Readmes: <none>
Strpd. Readmes:<none>
make utility: /usr/ccs/bin/make
unzip utility: /oracle/<SID>/11203/bin/unzip
User name: ora<SID>
Working dir: /oracle/stage
System: HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
Disk free: 11734549 KBytes on /oracle/<SID>
Disk required: 886496 KBytes on /oracle/<SID>
Getting pre-run patch inventory...
executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Interim Patch Installer version 11.2.0.3.3
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/<SID>/11203
Central Inventory : /oracle/<SID>/oraInventory
from : /oracle/<SID>/11203/oraInst.loc
OPatch version : 11.2.0.3.3
OUI version : 11.2.0.3.0
Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
List of Homes on this system:
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
Oracle Home dir. path does not exist in Central Inventory
Oracle Home is a symbolic link
Oracle Home inventory is corrupted
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
OPatch failed with error code 73
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory. Exiting.
I would appreciate if you folks can help me out on this
Thanks
APSFOLLOW UP QUESTION BRANCHED:
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR] -
Problem in upgrading from CUCM 8.5.1 to CUCM 8.6.2
Unable to upgarde cucm 8.5 to 8.6 ,
installed referesh upgrade cop file . tried on SFTP and using local DVD same below error displayed . Any one have any solution please share .
Installation Status
File
UCSInstall_UCOS_8.6.2.21900-5.sgn.iso
Start Time
Mon Dec 10 14:31:47 GST 2013
Status
Error encountered: An unknown error occurred while accessing the upgrade file.
12/10/2013 13:44:37 file_list.sh|Starting file_list.sh|<LVL::Info>
12/10/2013 13:44:37 file_list.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument dest_file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:44:37 file_list.sh|Calling SFTP command with metering off|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|SFTP command complete (0)|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|List file (pre-filtered):|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|(CAPTURE) UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|(CAPTURE) ciscocm.refresh_upgrade_v1.1.cop.sgn|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|/opt/cisco/install/bin/filter file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:38 filter|Parse argument file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:38 filter|No patch type specified. Optional.|<LVL::Debug>
12/10/2013 13:44:38 filter|No upgrade mode specifed. Optional.|<LVL::Debug>
12/10/2013 13:44:43 filter|Processing filter candidate names|<LVL::Debug>
12/10/2013 13:44:43 filter|Process "UCSInstall_UCOS_8.6.2.21900-5.sgn.iso"|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter|INorOUT=IN UCSInstall_UCOS_8.6.2.21900-5.sgn.iso: Filter passed.|<LVL::Debug>
12/10/2013 13:44:43 filter|Process "ciscocm.refresh_upgrade_v1.1.cop.sgn"|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern Signed Standard upgrade patch file (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_UNRST_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_UNRST_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_UNRST_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_UNRST_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (dp-ffr.[1-9]-[0-9]-[0-9]+.*.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (dp-ffr.[1-9]-[0-9]-[0-9]+.*.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cm-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cm-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (po-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (po-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-devicepack[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-devicepack[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-.*\.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-.*\.cop\.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (uc-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (uc-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (uc-friendly-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:45 filter| Match against cop pattern (uc-friendly-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:45 filter| Match against cop pattern (ciscocm..*.cop)|<LVL::Debug>
12/10/2013 13:44:45 filter| Match against cop pattern (ciscocm..*.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:45 filter|INorOUT=IN ciscocm.refresh_upgrade_v1.1.cop.sgn: Filter passed.|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|List file (post-filtered):|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <?xml version="1.0" encoding="UTF-8"?>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallList>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallItem type="patch" secure-file="UCSInstall_UCOS_8.6.2.21900-5.sgn.iso" version="8.6.2.21900-5" file="UCSInstall_UCOS_8.6.2.21900-5.sgn.iso" reboot="no" signed="yes"/>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallItem type="cop" secure-file="ciscocm.refresh_upgrade_v1.1.cop.sgn" version="0.0.0.0-0" file="ciscocm.refresh_upgrade_v1.1.cop" reboot="no" signed="yes"/>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) </InstallList>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|success|<LVL::Info>
12/10/2013 13:44:45 file_list.sh|file_list.sh complete (rc=0)|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Starting upgrade_validate_file.sh|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_type=patch|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_signed=yes|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Get //UCSInstall_UCOS_8.6.2.21900-5.sgn.iso size via sftp|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Size of file obtained from sftp is 4793341952|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Total space needed is 9586683904|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Check free space|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|There is enough space on device to proceed.|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|(CAPTURE) Free space : 25916985344|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|(CAPTURE) Space needed : 19827077120|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Remote SFTP request complete (0)|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|success|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|upgrade_validate_file.sh complete (rc=0)|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|Unmount DVD|<LVL::Info>
12/10/2013 13:44:57 upgrade_get_file.sh|Starting upgrade_get_file.sh|<LVL::Info>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument dest_dir=/common/download/|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument version=8.6.2.21900-5|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_type=patch|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_signed=yes|<LVL::Debug>
12/10/2013 13:45:08 upgrade_get_file.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:45:08 upgrade_get_file.sh|source_dir=/, dest_file=/common/download//UCSInstall_UCOS_8.6.2.21900-5.sgn.iso, file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:45:08 upgrade_get_file.sh|Starting SFTP|<LVL::Debug>
12/10/2013 14:29:34 upgrade_get_file.sh|Mount /common/download//UCSInstall_UCOS_8.6.2.21900-5.sgn.iso on /mnt/source|<LVL::Info>
12/10/2013 14:29:34 upgrade_get_file.sh|Download of iso file RTMTStart|<LVL::Notice>
12/10/2013 14:29:34 upgrade_get_file.sh|Create md5 "/common/download/UCSInstall_UCOS_8.6.2.21900-5.sgn.iso.md5"|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|MD5(/common/download/UCSInstall_UCOS_8.6.2.21900-5.sgn.iso)= e8:da:df:9a:3a:61:ee:27:4d:c5:4f:7b:77:78:bc:f1|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Create md5 complete|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|Authenticate file "/common/download/8.6.2.21900-5/checksum_file.sgn"|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|File authentication complete|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|authenticating ISO name, filename=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso, isoname=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Download of iso file RTMTFinish|<LVL::Notice>
12/10/2013 14:30:49 upgrade_get_file.sh|Checking for preflight script|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Executing preflight script: /mnt/source/Cisco/install/bin/preflight isolocation=/mnt/source|<LVL::Info>
12/10/2013 14:30:49 preflight|Starting preflight|<LVL::Info>
12/10/2013 14:30:49 preflight|Validate preflight data|<LVL::Info>
12/10/2013 14:30:49 preflight|Preflight data validation complete|<LVL::Info>
12/10/2013 14:30:49 preflight|Determine upgrade type|<LVL::Info>
12/10/2013 14:30:50 preflight|Active RH version = 4AS|<LVL::Debug>
12/10/2013 14:30:50 preflight|New os version(xml) = 5Server|<LVL::Debug>
12/10/2013 14:30:50 preflight|HW model = VMware|<LVL::Debug>
12/10/2013 14:30:50 preflight|Upgrade type = RU|<LVL::Debug>
12/10/2013 14:30:50 preflight|Obtain product type|<LVL::Info>
12/10/2013 14:30:53 preflight|Obtained product type CallManager|<LVL::Info>
12/10/2013 14:30:53 preflight|Processing preflight install mode|<LVL::Info>
12/10/2013 14:30:53 preflight|Set preflight cancel utility|<LVL::Info>
12/10/2013 14:30:53 preflight|Execute install preflight commands for CallManager:RU from /mnt/source/Cisco/install/preflight.xml|<LVL::Info>
12/10/2013 14:30:53 preflight|Found 10 preflight commands to execute|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (1/10): mkdir -p /common/preflight/CM/RU|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (2/10): cp -f /usr/local/platform/conf/dynamicConfig.xml /common/preflight/CM/RU/dynamicConfig.xml|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 1|<LVL::Debug>
12/10/2013 14:30:53 preflight|(CAPTURE) cp: cannot stat `/usr/local/platform/conf/dynamicConfig.xml': No such file or directory|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command did not complete (1). Continuing command processing...|<LVL::Warn>
12/10/2013 14:30:53 preflight|Execute preflight command (3/10): cp -f /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp /common/preflight/CM/RU/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 1|<LVL::Debug>
12/10/2013 14:30:53 preflight|(CAPTURE) cp: cannot stat `/usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp': No such file or directory|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command did not complete (1). Continuing command processing...|<LVL::Warn>
12/10/2013 14:30:53 preflight|Execute preflight command (4/10): cp -f /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/install-confirm-content.jsp /common/preflight/CM/RU/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (5/10): cp -f /mnt/source/Cisco/install/dynamicConfig_RU.xml /usr/local/platform/conf/dynamicConfig.xml|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (6/10): mkdir -p /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (7/10): cp -f /mnt/source/Cisco/install/dynamic_RU.jsp /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (8/10): cp -f /mnt/source/Cisco/install/install-confirm-content_RU.jsp /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (9/10): /mnt/source/Cisco/install/bin/tempDynamic.preflight /mnt/source/Cisco/install/dynamic_RU.jsp dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 starting tempDynamic.preflight...|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 Source dir/file = /mnt/source/Cisco/install/dynamic_RU.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 Destination file name = dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 ... tempDynamic.preflight completed|<LVL::Debug>
12/10/2013 14:30:54 preflight|Execute preflight command (10/10): /mnt/source/Cisco/install/bin/tempDynamic.preflight /mnt/source/Cisco/install/install-confirm-content_RU.jsp install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 starting tempDynamic.preflight...|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Source dir/file = /mnt/source/Cisco/install/install-confirm-content_RU.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Destination file name = install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 ... tempDynamic.preflight completed|<LVL::Debug>
12/10/2013 14:30:54 preflight|Exiting with result 0|<LVL::Info>
12/10/2013 14:30:54 upgrade_get_file.sh|preflight rc=0|<LVL::Debug>
12/10/2013 14:30:54 upgrade_get_file.sh|Preflight completed successfully|<LVL::Info>
12/10/2013 14:30:56 upgrade_get_file.sh|success|<LVL::Info>
12/10/2013 14:30:56 upgrade_get_file.sh|upgrade_get_file.sh complete (rc=0)|<LVL::Info>
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling active side processes
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling active side processes done
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling inactive side processes
12/30/2014 14:31:50 sd_cancelInstall.sh|Canceling inactive side processes done
12/10/2013 14:31:55 upgrade_install.sh|Starting Upgrade -- upgrade_install.sh|<LVL::Info>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument version=8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument dest_dir=/common/download/|<LVL::Debug>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|/usr/local/platform/bin/startcsa status|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|CSA Status = 0|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|(CAPTURE) Cisco Security Agent is running with pid 23124|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|CSA Status = 0|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|/etc/init.d/ciscosec stop|<LVL::Debug>
12/10/2013 14:32:14 upgrade_install.sh|(CAPTURE) Stopping ciscosec: [ OK ]|<LVL::Debug>
12/10/2013 14:32:14 upgrade_install.sh|Upgrade the system|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Copy /mnt/source/Cisco/base_scripts/upgrade_manager.sh to /common/download/8.6.2.21900-5/upgrade_manager.sh|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Copy /mnt/source/Cisco/base_scripts/upgrade_manager.sh to /common/download/8.6.2.21900-5/upgrade_manager.sh complete|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Start upgrade manager|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|/common/download/8.6.2.21900-5/upgrade_manager.sh type=upgrade basepath=/common/download/8.6.2.21900-5 file_name= logfile=/var/log/install/install_log_2013-12-30.13.44.35.log resultfile=/var/log/install/upgrade-results.xml work_dir=/var/log/install intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Cleanup data from a prior upgrade attempt|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any /grub/boot/grub/grub.conf.recovery|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Invalidate upgrade partition|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Clean up rpm any stale __db. files in rpmdb on the to side|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any master RPM from /partB|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any /partB/etc/opt/cisco/install.conf|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Invalidate any product configuration file|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument type=upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument basepath=/common/download/8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument file_name=|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument logfile=/var/log/install/install_log_2013-12-30.13.44.35.log|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument resultfile=/var/log/install/upgrade-results.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|upgrade_type="upgrade"|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|L2 upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initialize install support functions|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Calling "source /mnt/source/Cisco/install/bin/install_func"|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initialize install support functions complete|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Check for Refresh Upgrade|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Check if /mnt/source/upgradeConfig.xml exists|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Checking RedHat release version (4AS, 5Server)|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initiate Refresh Upgrade|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Copy /mnt/source/Cisco/install/bin/refresh_upgrade to /common/download/8.6.2.21900-5/refresh_upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Check that /common/download/8.6.2.21900-5/refresh_upgrade exists and is executable|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Calling exec /common/download/8.6.2.21900-5/refresh_upgrade type=upgrade basepath=/common/download/8.6.2.21900-5 file_name= logfile=/var/log/install/install_log_2013-12-30.13.44.35.log resultfile=/var/log/install/upgrade-results.xml work_dir=/var/log/install intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument type=upgrade|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument basepath=/common/download/8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument file_name=|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument logfile=/var/log/install/install_log_2013-12-30.13.44.35.log|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument resultfile=/var/log/install/upgrade-results.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|No 'to' version specified. Extracting it from base path.|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|NEW_VERSION updated to 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Refresh Upgrade Starting|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|IOWAIT monitor starting|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|Checksum the upgrade source on /mnt/source|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|Calling sha1sum -c /common/download/8.6.2.21900-5/checksum_file|<LVL::Debug>
12/10/2013 14:34:14 refresh_upgrade|Checksum complete|<LVL::Info>
12/10/2013 14:34:14 refresh_upgrade|Initialize staging area|<LVL::Info>
12/10/2013 14:34:14 refresh_upgrade|Initialize globals for hard drive|<LVL::Debug>
12/10/2013 14:34:14 refresh_upgrade|Calling rm -rf /common/refresh_upgrade /common/component|<LVL::Debug>
12/10/2013 14:34:23 refresh_upgrade|Copy /mnt/source to /common/refresh_upgrade|<LVL::Info>
12/10/2013 14:34:23 refresh_upgrade|Execute find /mnt/source and cpio to /common/refresh_upgrade. This may take several minutes.|<LVL::Debug>
12/10/2013 14:37:31 refresh_upgrade|Copy source files to staging area complete|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Initialize staging area complete|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Prepare Refresh Upgrade support directory|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Make /common/mnt/product_img mount point|<LVL::Info>
12/10/2013 14:37:32 refresh_upgrade|Calling umount /common/mnt/product_img|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Setup support directories|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling rm -rf /common/download/8.6.2.21900-5/Cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling mkdir -p /common/download/8.6.2.21900-5/Cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Create /common/cisco link to /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling rm -rf /common/cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling ln -s /common/download/8.6.2.21900-5/Cisco /common/cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Copy files from /common/refresh_upgrade/images/product.img to /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling mount /common/refresh_upgrade/images/product.img /common/mnt/product_img -o loop|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/iproduct.sh /common/download/8.6.2.21900-5/Cisco/bin/iproduct.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/ihardware.sh /common/download/8.6.2.21900-5/Cisco/bin/ihardware.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/ihistory.sh /common/download/8.6.2.21900-5/Cisco/bin/ihistory.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xproduct.sh /common/download/8.6.2.21900-5/Cisco/bin/xproduct.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xcomponent.sh /common/download/8.6.2.21900-5/Cisco/bin/xcomponent.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xplatformconfig.sh /common/download/8.6.2.21900-5/Cisco/bin/xplatformconfig.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/install_emailer /common/download/8.6.2.21900-5/Cisco/bin/install_emailer|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/component_install /common/download/8.6.2.21900-5/Cisco/bin/component_install|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling umount /common/mnt/product_img|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Setup install information in /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling ln -s /common/refresh_upgrade/Cisco/install /common/download/8.6.2.21900-5/Cisco/install|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) Mail notification cancelled - smtp server address for email not found! [/usr/local/platform/conf/platformConfig.xml]|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Setting up cisco specific enviroment|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|PATH=/common/download/8.6.2.21900-5/Cisco/bin:/usr/local/sbin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/sbin:/home/sftpuser:/root/.security|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|LD_LIBRARY_PATH=/common/download/8.6.2.21900-5/Cisco/lib:/opt/cisco/install/lib:|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|PYTHONPATH=/common/download/8.6.2.21900-5/Cisco/python:/usr/local/cm/lib:/usr/local/cm/lib:/usr/local/cm/lib:|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_CONF_PATH=/common/download/8.6.2.21900-5/Cisco/install/conf|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_BIN_PATH=/common/download/8.6.2.21900-5/Cisco/bin /opt/cisco/install/bin /usr/local/bin/base_scripts|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_PLATFORMCONF_PATH=/common/cisco /usr/local/platform/conf|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_LIB_PATH=/usr/local/bin/base_scripts|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Set logging globals for upgrade|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|Before: ILOG_CONTEXT="Upgrade", ILOG_FILE="/var/log/install/install_log_2013-12-30.13.44.35.log", ILOG_RESULTS_FILE="/var/log/install/upgrade-results.xml"|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|After: ILOG_CONTEXT="Upgrade", ILOG_FILE="/common/log/install/install_log_2013-12-30.13.44.35.log", ILOG_RESULTS_FILE="/common/log/install/upgrade-results.xml"|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Initialize APIs|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|Initializing the product API|<LVL::Info>
12/10/2013 14:37:37 refresh_upgrade|Initializing the hardware API|<LVL::Info>
12/10/2013 14:37:38 ServerApiManager|INITIALIZE: sam_legacy_mode_init=1|<LVL::Debug>
12/10/2013 14:37:46 ServerApiManager|INITIALIZE: sam_hssi_mode_init=0|<LVL::Debug>
12/10/2013 14:37:46 refresh_upgrade|Initializing the history log API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initializing the xplatformconfig API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initializing the xproduct API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initialize setup functions|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Calling "source /common/download/8.6.2.21900-5/Cisco/install/setup/utils.sh"|<LVL::Debug>
12/10/2013 14:37:46 refresh_upgrade|Initialize setup functions complete|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Getting deployment ID from active side|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Copy /usr/local/platform/conf/platformConfig.xml to /common/cisco/platformConfig.xml|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Calling "cp /usr/local/platform/conf/platformConfig.xml /common/cisco/platformConfig.xml"|<LVL::Debug>
12/10/2013 14:37:48 refresh_upgrade|Check if the upgrade is allowed|<LVL::Info>
12/10/2013 14:37:48 refresh_upgrade|Validate hardware for the upgrade|<LVL::Info>
12/10/2013 14:37:48 refresh_upgrade|Hardware is supported for the upgrade|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate hardware for "callmanager" deployment|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Hardware is supported for "callmanager" deployment|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate from version 8.5.1.10000-26|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Upgrade from 8.5.1.10000-26 allowed|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate free space for the upgrade|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|(CAPTURE) Free space: 26040668160, Needed space: 15014745300|<LVL::Debug>
12/10/2013 14:37:50 refresh_upgrade|Free space validation complete|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Run component export scripts|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xproduct.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xcomponent.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xplatformconfig.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument export|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument mode=refresh-upgrade|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument install_root=/common/refresh_upgrade/Cisco|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument data_root=/common|<LVL::Debug>
12/10/2013 14:37:50 component_install|Run component export scripts, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize product data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize "to" side product version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initialize "to" side product version complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize "from" side product version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initialize "from" side product version complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize product data complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize ucos "to" side version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucos "to" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucos "from" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Component ucos available on active side|<LVL::Debug>
12/10/2013 14:37:51 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucos "from" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Build the command list for ucos|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:51 component_install|Build ucos export phase commands|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucos export element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Building the command list for ucos is complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component RTMTStart|<LVL::Notice>
12/10/2013 14:37:51 component_install|Execute commands in the command list for ucos component|<LVL::Info>
12/10/2013 14:37:51 component_install|No commands to execute for ucos component|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component is complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:51 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucplatform "to" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucplatform "to" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucplatform "from" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Component ucplatform available on active side|<LVL::Debug>
12/10/2013 14:37:51 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucplatform "from" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Build the command list for ucplatform|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:51 component_install|Build ucplatform export phase commands|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucplatform export element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Add "security_prepare RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "password_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "ssh_keys_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "installed_options_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "platform_certs_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "servm_export RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "network_files_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "drf_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Building the command list for ucplatform is complete|<LVL::Info>
12/10/2013 14:37:52 component_install|Command execution for ucplatform component RTMTStart|<LVL::Notice>
12/10/2013 14:37:52 component_install|Execute commands in the command list for ucplatform component|<LVL::Info>
12/10/2013 14:37:52 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:52 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/security_prepare|<LVL::Debug>
12/10/2013 14:37:52 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/security_prepare RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Parse arguments|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Validate arguments|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Initialize global variables|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Handle Security Information|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export security information|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export /etc/shadow file|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export login warning message|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export SFTP data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export DRF data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export CCM Service Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export IPSec Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|get_fips_status returning partB fips_cnf as 0|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export Racoon Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export Tomcat Data|<LVL::Debug>
12/10/2013 14:37:53 security_prepare|security information prepare successful|<LVL::Info>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/password_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/password_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:53 password_migrate|Handle password information|<LVL::Debug>
12/10/2013 14:37:53 password_migrate|Export password information|<LVL::Info>
12/10/2013 14:37:53 password_migrate|Calling mkdir -p /common/component/ucplatform/etc/pam.d|<LVL::Info>
12/10/2013 14:37:53 password_migrate|password information migrate successful|<LVL::Info>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/ssh_keys_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/ssh_keys_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/installed_options_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/installed_options_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:55 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:55 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/platform_certs_migrate|<LVL::Debug>
12/10/2013 14:37:55 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/platform_certs_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:55 platform_certs_migrate|Source major version: 8|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|Export platform certificates|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|starting refresh upgrade export certs copy|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|starting refresh upgrade export certs copy|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|exporting certmon config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform/config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|copy /usr/local/platform/conf/certMonitorConfig.xml /common/component/ucplatform/conf/|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|Export bulk sftp config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|sftp config not available|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|platform certificates migrate successful|<LVL::Info>
12/10/2013 14:37:55 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:55 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/servm_export|<LVL::Debug>
12/10/2013 14:37:55 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/servm_export RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:56 servm_export|Start servm Export processing|<LVL::Info>
12/10/2013 14:37:56 servm_export|Copying /usr/local/cm//../platform/conf/activate.conf to /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:56 servm_export|Copying /usr/local/cm//../platform/conf/services.conf to /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:56 servm_export|SUCCESS: servm Export processing completed|<LVL::Info>
12/10/2013 14:37:56 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:56 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/network_files_migrate|<LVL::Debug>
12/10/2013 14:37:56 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/network_files_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Export network configuration files to /common/component/ucplatform/etc/sysconfig/network-scripts|<LVL::Info>
12/10/2013 14:37:56 network_files_migrate|Calling mkdir -p /common/component/ucplatform/etc/sysconfig/network-scripts|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Calling mkdir -p /common/component/ucplatform/common|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copy network configuration files|<LVL::Info>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/sysconfig/network-scripts/ifcfg-eth0 to /common/component/ucplatform/etc/sysconfig/network-scripts/ifcfg-eth0|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/sysconfig/network to /common/component/ucplatform/etc/sysconfig/network|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/hosts to /common/component/ucplatform/etc/hosts|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copying /etc/resolv.conf to /common/component/ucplatform/etc/resolv.conf|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copying //etc/nsswitch.conf to /common/component/ucplatform/etc/nsswitch.conf|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copy network configuration files complete|<LVL::Info>
12/10/2013 14:37:57 network_files_migrate|Export network configuration files complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:57 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/drf_migrate|<LVL::Debug>
12/10/2013 14:37:57 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/drf_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:57 component_install|Command execution for ucplatform component is complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Command execution for ucplatform component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:57 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "to" side version|<LVL::Info>
12/10/2013 14:37:57 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:57 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "to" side version complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "from" side version|<LVL::Info>
12/10/2013 14:37:57 component_install|Component ucplatform_cluster available on active side|<LVL::Debug>
12/10/2013 14:37:57 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:57 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "from" side version complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Build the command list for ucplatform_cluster|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:57 component_install|Build ucplatform_cluster export phase commands|<LVL::Debug>
12/10/2013 14:37:57 component_install|Processing ucplatform_cluster export element|<LVL::Debug>
12/10/2013 14:37:57 component_install|Processing ucplatform_cluster script element|<LVL::Debug>
12/10/2013 14:37:57 component_install|Add "platform_sso_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform_cluster /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:57 component_install|Building the command list for ucplatform_cluster is complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Command execution for ucplatform_cluster component RTMTStart|<LVL::Notice>
12/10/2013 14:37:57 component_install|Execute commands in the command list for ucplatform_cluster component|<LVL::Info>
12/10/2013 14:37:57 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform_cluster/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:57 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform_cluster/scripts/platform_sso_migrate|<LVL::Debug>
12/10/2013 14:37:57 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform_cluster/scripts/platform_sso_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform_cluster /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:58 platform_sso_migrate|Source major version: 8|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for ucplatform_cluster component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for ucplatform_cluster component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize thirdparty "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize thirdparty "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize thirdparty "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component thirdparty available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize thirdparty "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Build the command list for thirdparty|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:58 component_install|Build thirdparty export phase commands|<LVL::Debug>
12/10/2013 14:37:58 component_install|Processing thirdparty export element|<LVL::Debug>
12/10/2013 14:37:58 component_install|Building the command list for thirdparty is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component RTMTStart|<LVL::Notice>
12/10/2013 14:37:58 component_install|Execute commands in the command list for thirdparty component|<LVL::Info>
12/10/2013 14:37:58 component_install|No commands to execute for thirdparty component|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component serviceability_core available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Build the command list for serviceability_core|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:58 component_install|Build serviceability_core export phase commands|<LVL::Debug>
12/10/2013 14:37:58 component_install|Processing serviceability_core export element|<LVL::Debug>
12/10/2013 14:37:58 component_install|Building the command list for serviceability_core is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component RTMTStart|<LVL::Notice>
12/10/2013 14:37:58 component_install|Execute commands in the command list for serviceability_core component|<LVL::Info>
12/10/2013 14:37:58 component_install|No commands to execute for serviceability_core component|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize database "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize database "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize database "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component database available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize database "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>hi gupta ,
admin:run sql car select * from tbl_event_log
Failed to get Connection.Connector(NOT CONNECTED: Driver=com.informix.jdbc.IfxDr iver;)
admin:run sql car select * from tbl_system_preferences
Failed to get Connection.Connector(NOT CONNECTED: Driver=com.informix.jdbc.IfxDriver;)
restarted the below sevices
Cisco CDR Agent
Cisco Database Layer Monitor
Cisco CDR Repository Manager
Cisco CAR Scheduler
Cisco SOAP - CDRonDemand Service
Cisco CAR Web Service
while accessing cdr reporting showing below error .
------------------------------------------WARNING-----------------------------------------
* Cluster wide parameter 'Call Diagnostics Enabled flag' is set to false. Hence no QoS information will be generated on calls. If required, please configure the same from service parameter page for Call Manager service.
* Problem in determining 2M/HWM breach status. Tbl_System_Preferences table might be corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
* Tbl_System_Preferences table is corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
* Problem in determining Loader Configuration. Tbl_System_Preferences table might be corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
-------------------------------------------NOTICE------------------------------------------
* Problem in determining Billing Tables status. Please check the CAR DB for tables Tbl_Billing_Data and Tbl_Billing_Error.
* Problem in getting the Mail parameters. It might result in mails/alerts/notifications not been sent to CAR Administrators. Please configure this at CAR->System->System Parameters->Mail Parameters.
* Mail id for 'ccmadmin' is not available. CAR Reports/Notifications/Alert Emails might not be able to sent to this user properly. Please configure a mail id in end user configuration page.
if we apllied Restore Defaults ,geting below error
Error Code
Error Description
30029
Direct access to this screen is not allowed.
and try to access system and data base , getting below error
Error Code
Error Description
10012
Database Error. Contact System Administrator.
Does any other way to avoid cdr and do the istallation . -
Swf previews in browser and doesn't work on server after upgrade from cs3 to cs5
I have upgraded from CS3 to CS5. My site uses a template created in dreamweaver 8. When I edit a page and embed a .swf file created in flash cs5, it doesn't work on my server, but works on my computer when I 'test in browser'. I have uploaded all the files in the 'scripts' directory. I am streaming video. I have tried using both actionscript 2.0 and 3.0 and streaming .flv and .f4v. None work.
I have a big site and do not wan't to redo my template unless I absolutely have to.
Here is the link:
http://retinavitreous.com/educationalvideo2010/clips/intro_eyesees.html
Here is the code on my page:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<!-- saved from url=(0014)about:internet -->
<html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/mainnopop.dwt" codeOutsideHTMLIsLocked="false" -->
<head>
<!-- InstanceBeginEditable name="doctitle" -->
<title>video vitrectomy for macular hole re-operation ilm peel</title>
<!-- InstanceEndEditable -->
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css">
td img {display: block;}body {
background-color: #0000FF;
margin-left: 0px;
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
a:link {
color: #FFFF00;
a:visited {
color: #00FFFF;
a:hover {
color: #FFFFFF;
a:active {
color: #99CC00;
#main {
position:absolute;
width:579px;
height:815px;
z-index:1;
left: 168px;
top: 96px;
#right {
position:absolute;
width:238px;
height:817px;
z-index:2;
left: 792px;
top: 98px;
</style>
<!--Fireworks 8 Dreamweaver 8 target. Created Tue May 26 14:59:01 GMT-0400 (Eastern Daylight Time) 2009-->
<script language="JavaScript1.2" type="text/javascript">
<!--
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
//-->
</script>
<!-- InstanceBeginEditable name="head" -->
<script src="../../Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<script src="../../Scripts/swfobject_modified.js" type="text/javascript"></script>
<!-- InstanceEndEditable -->
<link href="../../css/yellowblue.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
body,td,th {
color: #FFFBF0;
-->
</style></head>
<body bgcolor="#ffffff" onload="MM_preloadImages('../../Templates/tempanimation/temp_animation_r1_c1_f2.gif','../ ../Templates/tempanimation/tempanimation_r1_c1_f2.gif','../../Templates/tempanimation/temp _animation_r1_c2_f2.gif','../../Templates/tempanimation/tempanimation_r1_c2_f2.gif','../.. /Templates/tempanimation/temp_animation_r1_c4_f2.gif','../../Templates/tempanimation/tempa nimation_r1_c4_f2.gif','../../Templates/tempanimation/temp_animation_r1_c5_f2.gif','../../ Templates/tempanimation/tempanimation_r1_c5_f2.gif','../../Templates/tempanimation/temp_an imation_r1_c7_f2.gif','../../Templates/tempanimation/tempanimation_r1_c7_f2.gif','../../Te mplates/tempanimation/temp_animation_r1_c8_f2.gif','../../Templates/tempanimation/tempanim ation_r1_c8_f2.gif','../../Templates/tempanimation/temp_animation_r2_c6_f2.gif','../../Tem plates/tempanimation/tempanimation_r2_c6_f2.gif','../../Templates/tempanimation/temp_anima tion_r4_c1_f2.gif','../../Templates/tempanimation/tempanimation_r4_c1_f2.gif','../../Templ ates/tempanimation/temp_animation_r5_c1_f2.gif','../../Templates/tempanimation/tempanimati on_r5_c1_f2.gif','../../Templates/tempanimation/temp_animation_r6_c1_f2.gif','../../Templa tes/tempanimation/tempanimation_r6_c1_f2.gif','../../Templates/tempanimation/temp_animatio n_r7_c1_f2.gif','../../Templates/tempanimation/tempanimation_r7_c1_f2.gif','../../Template s/tempanimation/temp_animation_r8_c1_f2.gif','../../Templates/tempanimation/tempanimation_ r8_c1_f2.gif','../../Templates/tempanimation/temp_animation_r9_c1_f2.gif','../../Templates /tempanimation/tempanimation_r9_c1_f2.gif','../../Templates/tempanimation/temp_animation_r 11_c1_f2.gif','../../Templates/tempanimation/tempanimation_r11_c1_f2.gif')">
<table border="0" cellpadding="0" cellspacing="0" width="1440">
<!-- fwtable fwsrc="tempanimation.png" fwbase="tempanimation.gif" fwstyle="Dreamweaver" fwdocid = "41244840" fwnested="0" -->
<tr>
<td><img src="../../Templates/tempanimation/spacer.gif" width="99" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="68" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="14" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="85" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="121" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="114" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="160" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="163" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="616" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="1" border="0" alt="" /></td>
</tr>
<tr>
<td rowspan="2"><a href="../../index.php" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r1_c1','','../../Templates/tempanimation/temp_an imation_r1_c1_f2.gif','tempanimation_r1_c1','','../../Templates/tempanimation/tempanimatio n_r1_c1_f2.gif',1)"><img name="tempanimation_r1_c1" src="../../Templates/tempanimation/tempanimation_r1_c1.gif" width="99" height="24" border="0" id="tempanimation_r1_c1" alt="" /></a></td>
<td rowspan="2" colspan="2"><a href="../../ouroffices/alloffices.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r1_c2','','../../Templates/tempanimation/temp_an imation_r1_c2_f2.gif','tempanimation_r1_c2','','../../Templates/tempanimation/tempanimatio n_r1_c2_f2.gif',1)"><img name="tempanimation_r1_c2" src="../../Templates/tempanimation/tempanimation_r1_c2.gif" width="82" height="24" border="0" id="tempanimation_r1_c2" alt="" /></a></td>
<td rowspan="2"><a href="../../patientinfo/forms.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r1_c4','','../../Templates/tempanimation/temp_an imation_r1_c4_f2.gif','tempanimation_r1_c4','','../../Templates/tempanimation/tempanimatio n_r1_c4_f2.gif',1)"><img name="tempanimation_r1_c4" src="../../Templates/tempanimation/tempanimation_r1_c4.gif" width="85" height="24" border="0" id="tempanimation_r1_c4" alt="" /></a></td>
<td rowspan="2"><a href="../../treatments/overviewtreatments.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r1_c5','','../../Templates/tempanimation/temp_an imation_r1_c5_f2.gif','tempanimation_r1_c5','','../../Templates/tempanimation/tempanimatio n_r1_c5_f2.gif',1)"><img name="tempanimation_r1_c5" src="../../Templates/tempanimation/tempanimation_r1_c5.gif" width="121" height="24" border="0" id="tempanimation_r1_c5" alt="" /></a></td>
<td><img name="tempanimation_r1_c6" src="../../Templates/tempanimation/tempanimation_r1_c6.gif" width="114" height="1" border="0" id="tempanimation_r1_c6" alt="" /></td>
<td rowspan="2"><a href="../../video files/videostart.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r1_c7','','../../Templates/tempanimation/temp_an imation_r1_c7_f2.gif','tempanimation_r1_c7','','../../Templates/tempanimation/tempanimatio n_r1_c7_f2.gif',1)"><img name="tempanimation_r1_c7" src="../../Templates/tempanimation/tempanimation_r1_c7.gif" width="160" height="24" border="0" id="tempanimation_r1_c7" alt="" /></a></td>
<td rowspan="2"><a href="../../flash/animations/overview_animations.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r1_c8','','../../Templates/tempanimation/temp_an imation_r1_c8_f2.gif','tempanimation_r1_c8','','../../Templates/tempanimation/tempanimatio n_r1_c8_f2.gif',1)"><img name="tempanimation_r1_c8" src="../../Templates/tempanimation/tempanimation_r1_c8.gif" width="163" height="24" border="0" id="tempanimation_r1_c8" alt="" /></a></td>
<td><img name="tempanimation_r1_c9" src="../../Templates/tempanimation/tempanimation_r1_c9.gif" width="616" height="1" border="0" id="tempanimation_r1_c9" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="1" border="0" alt="" /></td>
</tr>
<tr>
<td><a href="../../patientinfo/insurancepar.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r2_c6','','../../Templates/tempanimation/temp_an imation_r2_c6_f2.gif','tempanimation_r2_c6','','../../Templates/tempanimation/tempanimatio n_r2_c6_f2.gif',1)"><img name="tempanimation_r2_c6" src="../../Templates/tempanimation/tempanimation_r2_c6.gif" width="114" height="23" border="0" id="tempanimation_r2_c6" alt="" /></a></td>
<td><img name="tempanimation_r2_c9" src="../../Templates/tempanimation/tempanimation_r2_c9.gif" width="616" height="23" border="0" id="tempanimation_r2_c9" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="23" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="9"><img name="tempanimation_r3_c1" src="../../Templates/tempanimation/tempanimation_r3_c1.gif" width="1440" height="69" border="0" id="tempanimation_r3_c1" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="69" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../patientinfo/overview_patientinfo.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r4_c1','','../../Templates/tempanimation/temp_an imation_r4_c1_f2.gif','tempanimation_r4_c1','','../../Templates/tempanimation/tempanimatio n_r4_c1_f2.gif',1)"><img name="tempanimation_r4_c1" src="../../Templates/tempanimation/tempanimation_r4_c1.gif" width="167" height="30" border="0" id="tempanimation_r4_c1" alt="" /></a></td>
<td rowspan="9" colspan="7" ><div id="main"><!-- InstanceBeginEditable name="main" -->
<h2 align="center">How the Eye Sees Animation
</h2>
<p align="center">
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="874" height="520" id="FlashID" title="eye sees">
<param name="movie" value="eyeseesas2.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0" />
<!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
<param name="expressinstall" value="../../Scripts/expressInstall.swf" />
<!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
<!--[if !IE]>-->
<object type="application/x-shockwave-flash" data="eyeseesas2.swf" width="874" height="520">
<!--<![endif]-->
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0" />
<param name="expressinstall" value="../../Scripts/expressInstall.swf" />
<!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object>
</p>
<!-- InstanceEndEditable --></div>
<div id="right"><!-- InstanceBeginEditable name="right" -->
<p> </p>
<script type="text/javascript">
swfobject.registerObject("FlashID");
</script>
<!-- InstanceEndEditable --></div></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="30" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../diseases/overview_diseases.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r5_c1','','../../Templates/tempanimation/temp_an imation_r5_c1_f2.gif','tempanimation_r5_c1','','../../Templates/tempanimation/tempanimatio n_r5_c1_f2.gif',1)"><img name="tempanimation_r5_c1" src="../../Templates/tempanimation/tempanimation_r5_c1.gif" width="167" height="33" border="0" id="tempanimation_r5_c1" alt="" /></a></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="33" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../refdoc/overview_refdoc.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r6_c1','','../../Templates/tempanimation/temp_an imation_r6_c1_f2.gif','tempanimation_r6_c1','','../../Templates/tempanimation/tempanimatio n_r6_c1_f2.gif',1)"><img name="tempanimation_r6_c1" src="../../Templates/tempanimation/tempanimation_r6_c1.gif" width="167" height="32" border="0" id="tempanimation_r6_c1" alt="" /></a></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="32" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../ourdocs/alldocs.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r7_c1','','../../Templates/tempanimation/temp_an imation_r7_c1_f2.gif','tempanimation_r7_c1','','../../Templates/tempanimation/tempanimatio n_r7_c1_f2.gif',1)"><img name="tempanimation_r7_c1" src="../../Templates/tempanimation/tempanimation_r7_c1.gif" width="167" height="31" border="0" id="tempanimation_r7_c1" alt="" /></a></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="31" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../ouroffices/alloffices.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r8_c1','','../../Templates/tempanimation/temp_an imation_r8_c1_f2.gif','tempanimation_r8_c1','','../../Templates/tempanimation/tempanimatio n_r8_c1_f2.gif',1)"><img name="tempanimation_r8_c1" src="../../Templates/tempanimation/tempanimation_r8_c1.gif" width="167" height="31" border="0" id="tempanimation_r8_c1" alt="" /></a></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="31" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../contactus/contacthome.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r9_c1','','../../Templates/tempanimation/temp_an imation_r9_c1_f2.gif','tempanimation_r9_c1','','../../Templates/tempanimation/tempanimatio n_r9_c1_f2.gif',1)"><img name="tempanimation_r9_c1" src="../../Templates/tempanimation/tempanimation_r9_c1.gif" width="167" height="32" border="0" id="tempanimation_r9_c1" alt="" /></a></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="32" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><img name="tempanimation_r10_c1" src="../../Templates/tempanimation/tempanimation_r10_c1.gif" width="167" height="13" border="0" id="tempanimation_r10_c1" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="13" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../lowvision/lowvisionhome.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r11_c1','','../../Templates/tempanimation/temp_a nimation_r11_c1_f2.gif','tempanimation_r11_c1','','../../Templates/tempanimation/tempanima tion_r11_c1_f2.gif',1)"><img name="tempanimation_r11_c1" src="../../Templates/tempanimation/tempanimation_r11_c1.gif" width="167" height="102" border="0" id="tempanimation_r11_c1" alt="" /></a></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="102" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><img name="tempanimation_r12_c1" src="../../Templates/tempanimation/tempanimation_r12_c1.gif" width="167" height="503" border="0" id="tempanimation_r12_c1" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="503" border="0" alt="" /></td>
</tr>
</table>
</body>
<!-- InstanceEnd --></html>It's not 100% clear from your post, but you should be aware that CS5 plugins should not work in CS5.5. Because of a CS5.5 bug, CS5 plugins will load in InDesign 7.5.0, but that is fixed in 7.5.1 so they will not load.
You should lean a bit harder on Virginia Systems. They should be able to tell you how to get them the stack trace from the crash which they should be able to look at and tell you which plugin (if any) is responsible for the crash. I could do it for Mac OS X but I don't know how under Windows. You could start by looking at the Event Viewer, though. That may have some helpful information about the crashes and the faulting module. -
Sharepoint 2013 search broken after upgrade from 2013 foundation to 2013 ent.
Hello
I have tried many of the suggestions that I have found in the forums for this issue but non have worked as of yet.
I have sharepoint 2013 sp1 running on server 2012 R2 connected to SQL 2012 DB, which was upgrade from SharePoint foundation 2013. Everything is working with the exception of the search. the errors are below.
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (1d094485-eab9-458d-a363-4b5e8704048f).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
For some reason this is using the farm account which is not the account used for the search service but has full access to the sites and databases. So I'm not sure what or where it is getting an access denied error. Is there any way to find what it is trying
to access? BTW I have disabled the loopback check, verified it has correct access to %windir%\tasks and recreated the search service many times, changed application pool accounts
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (1d094485-eab9-458d-a363-4b5e8704048f).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
Any help you can provide would be greatly appreciated.Hi ,
According to your description, my understanding is that you encountered the error Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
after you upgraded SharePoint 2013 Foundation to SharePoint Server 2013.
For troubleshooting your issue, please try adding the farm account on the Server local administrator group and see if it is related to permission issue. Then try stopping the Timer Service, clearing
the Configuration Cache and restarting the Timer Service:
http://www.social-point.com/sharepoint-2010-event-id-6482-application-server-administration-job-failed-for-service-instance-microsoft-office-server-search-administration-searchserviceinstance
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
as well as:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
Search Administration page, the "System Status" shows the following message:
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
try again
Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
running.
Does anyone know how I can resolve this problem?
Thanks!Hi Joaquin,
According to your description, the error occurred when you re-created the Search Service Application.
Based on the error message, I recommend to verify the things below:
1. Check if the association between the Search Service Application proxy and the web application is configured.
Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
File- Export not working after upgrade from 11i to R12
Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
JagadeeshaEnabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
Maybe you are looking for
-
How to retrieve the number of "free" rows in a table?
Hi, if in a client only environment (no sync to mobile server) rows are inserted and deleted into a table, is there a way to retrieve the number of "free" rows in a table? Number of "Free" rows stands for number of rows that can be inserted again, be
-
In thunderbird how do i change the menubar color
When I recently updated to the most recent update, the menubar changed to an ugly and hard to read blue color. It would be nice if the developers did not change things like that. Provide instructions for those who do want to change. Anyway, how do I
-
Download Error message in Apps
The apps category in my CC keeps giving me an download error message even when I click the reload apps button. Does anyone know how to resolve this issue?
-
Hi, how can i change the suffix when i dont define a field mapping. Per default you add an "x" to the Object Attribute and try to find the field in the DB. I dont want to have that "x" added to the end. Thanks. (i really read the docs, but couldnt fi
-
Service PO's with tax and Non servie pos without tax
Hi, In my present process.For service (ME21N)PO'S withholdingtax is calculated and for non service PO's there is no withholdingtax calculated. In standard sap PO's.Tax will be calculated for both service POS and non service PO's. Can any guide me wh