Name Dialing and Find button in Device Profile

I have two questions.
1. How do I enable "Name Dialing" option in CUCM 8.6, I dont have that option in End user Configuration.
2. How do I have "FIND" button next to Phone Button Templet in Device Profile configuration window.
Thanks

Name dialing not even sure where you got that screenshot, I also don't have it
Find is only available when you have so many phone button templates and they cannot be shown in the dropdown.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

Finding Orphaned User Device Profiles for EM

HI Everyone
I want to clean up CUCM and get rid of orphaned device profiles and I wanted to know is there a function in CUCM that will allow me to do this or some sort of CLI command that I can use to get the excess profiles out of the system. Thanks in advance for the help and have a great day and I look forward to the answer.
Eric

I've been waiting for someone to post the command that I would use from the CLI so I googled it and I did find a site called UC Guerrilla and they talked about it but they didn't show what commands to use.

Nokia 5800 Dialer and Contact Button Not Working

Before i updated the phone software, i avoid it by using the contacts bar home screen theme; the contact button and dialer seem to work only in that layout, which i didn't mind. But now, after the update, and since there no other way to access the dialer im kinda screwed...$300 phone with no that can't dial how embarrassing
If anyone know the cause or cure for this problem plz help

hey that happens to me too I'm so **bleep**, did you fixed yours?
chieftank wrote:
Before i updated the phone software, i avoid it by using the contacts bar home screen theme; the contact button and dialer seem to work only in that layout, which i didn't mind. But now, after the update, and since there no other way to access the dialer im kinda screwed...$300 phone with no that can't dial how embarrassing
If anyone know the cause or cure for this problem plz help
chieftank wrote:
Before i updated the phone software, i avoid it by using the contacts bar home screen theme; the contact button and dialer seem to work only in that layout, which i didn't mind. But now, after the update, and since there no other way to access the dialer im kinda screwed...$300 phone with no that can't dial how embarrassing
If anyone know the cause or cure for this problem plz help

How to find an older device on my itunes account and transfer to a new computer

I had an itunes account on my laptop and my laptop broke how can I transfer my itunes account to a new computer and find my old devices on it?

What are you talking about?
An account is just a username and password with which you purchase content.
You can sign into your account from any computer/device with itunes.
It has always been very basic to always maintain a backup copy of your computer. Use your backup copy to put your content on your new computer.
If for some reason you have failed to maintain a backup copy, not good, then you can redownload some itunes purchases in some countries.
Download previous purchases from the iTunes Store - Support - Apple
No idea what you mean by "find my old devices on it"

Bat multiple BLF with User Device Profiles

Has anyone able to BAT in multiple Speed Dial/BLF into a user device profile. I have CUCM 7.1 and trying to BAT in a line with multiple SD/BLF for the other buttons. I get this error
Error : Missing key in referenced table for referential constraint (informix.fk_blfspeeddial_fknumplan).
I checked my phone template and it has 1 line with 5 SD/BLF
My phone type is 9951
Thanks

Juergen,
Do your fields look like this?
Busy Lamp Field Label 3
Busy Lamp Field Label ASCII 3
Busy Lamp Field Destination 3
Busy Lamp Field Directory Number 3
J. Nelson
J. Nelson
2303 in INTERNAL-PT
Nurse
Nurse
4062 in INTERNAL-PT
Library
Library
4017 in INTERNAL-PT
B. Hipsher
B. Hipsher
4092 in INTERNAL-PT
C. Kirkland
C. Kirkland
8246 in INTERNAL-PT
L. Stoner
L. Stoner
2040 in INTERNAL-PT
South Lounge
South Lounge
2637 in INTERNAL-PT
Ginger W
Ginger W
6043 in INTERNAL-PT
K. Jaffie
K. Jaffie
4609 in INTERNAL-PT
L. Cornwall
L. Cornwall
2755 in ES-ClassRm-PT
NA Counselor
NA Counselor
2123 in ES-ClassRm-PT
S. Brigman
S. Brigman
8262 in INTERNAL-PT
D. Sorden
D. Sorden
8205 in INTERNAL-PT
J. Brandel
J. Brandel
8105 in INTERNAL-PT
J. Brandel
J. Brandel
8105 in INTERNAL-PT
S. Pebley
S. Pebley
5512 in INTERNAL-PT
S. Pebley
S. Pebley
5512 in INTERNAL-PT
Wanda B
Wanda B
6072 in INTERNAL-PT

How can I sync my photo contents in iPhoto on my iMac to my new iPAD's iPhoto? I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but I cannot find "phone button" under Device name on iTunes page. Please help! Thanks!

I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help! Thanks!
I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto. However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD.
So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info. That means no syncing....
I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
I am puzzled. I appreciate for your advice and help.
Thank you!

It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side :

Find monitor instance name , device name , resolution and frequency of multiple monitors (VGA and HDMI)

hi,
In my system multiple monitors are connected (VGA and HDMI). In need to know the
monitor instance name , device name , resolution and frequency of each monitor.. any solution?
i used wm class 'WmiMonitorConnectionParams' to determine Video output technology connection type and InstanceName.
But i didn't get the device name , resolution and frequency of each monitor.??
There are other wmi class like :
WmiMonitorBrightnessEvent
WmiMonitorConnectionParams
WmiMonitorRawEEdidV1Block
WmiMonitorListedFrequencyRanges
WmiMonitorDigitalVideoInputParams
WmiMonitorAnalogVideoInputParams
WmiMonitorID
WmiMonitorBrightnessMethods
WmiMonitorBasicDisplayParams
WmiMonitorColorCharacteristics
WmiMonitorDescriptorMethods
WmiMonitorListedSupportedSourceM…
WmiMonitorBrightness
WmiMonitorColorXYZinCIE
WmiMonitorSupportedDisplayFeatures
WmiMonitorBasicDisplayParams
Win32_VideoController
Win32_VideoConfiguration
Win32_VideoSettings Win32_DisplayControllerConfiguration
Win32_DisplayConfiguration
But unable to determine monitor having its corresponding values? please help me to find a solution .
is there any other method to get multi monitor details?
thank you

Hi sumith,
I read some documents about WmiMonitorConnectionParams class, it should be able to get the video putput technology by the D3DKMDT_VIDEO_OUTPUT_TECHNOLOGY enumeration.
D3DKMDT_VIDEO_OUTPUT_TECHNOLOGY enumeration
So what happens when you are using WmiMonitorConnectionParams class? What prevent you? Anyway, please see a example of using WmiMonitorConnectionParams class, maybe you could get some hints on it.
http://stackoverflow.com/questions/10085900/querying-wmi-for-d3dkmdt-video-output-technology
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am using an original iPad that originally belonged to my wife. iTunes and Find My iPad recognize this device as Sally Fanta's iPad. How do I change the device name to John Fanta's iPad

I am using an original iPad that originally belonged to my wife. iTunes and Find My iPad recognize this device as Her iPad. How do I change the device name to My iPad

Look at this link.
Giving your former iPad to a spouse or family member: the quick guide
http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
 Cheers, Tom

Firefox will not open and my profile name changes, after I creat a new profile it works until I try to open again

Firefox version 16.0.2 was working I have used FF for years. A few days ago it started to run very slow opening web sites. Then this morning when I tried to open it I saw a progress bar that looked like the kind I see after an update has been applied but FF never opened.
I rebooted my windows 7 64 bit and tried again, nothing FF would not open and I got no error message.
So I opened the profile manager and only found a default profile not the one I created last year with my name. I created a new profile and browsed to my old profile folder. FF opened and ran fine until I closed it and later tried to open it again then I kept getting an error box telling me that FF had crashed and asked if I wanted to send a report and restart, I did but no good it still would not open.
I ran the profile manager again and found my profile had changed name to a bunch of numbers. I delete that profile but kept the folder then made a new one and that worked. I shut it down again and once again I get the We're sorry error box.
By the way I had set the profile manager to open when FF loads and it is not opening so the problem is before it gets to that command.

First I already have my view set to show everything so that is not the problem.
But I just tried opening "Computer" from the start button then type in profiles.ini in the address bar and hit enter. The profile manager opened with my profile listed. I selected it and hit start firefox and it opened as it should.
I closed it again and tried to open it from the shortcut in my task bar and I got the Sorry window.
But then I tried to open it from the short cut you get when you press the start button and program list and it work!
I went back to my desk top and tried the short cut on the desk top and it worked.
So I deleted the short cut on the task bar and created a new one and it worked.
I rebooted the computer and tried again and the task bar shortcut works and has the right profile.
So it seems that the problem is that the short cut was corrupted and was causing the error that caused the program to fail to open.
I had no idea a shortcut could do that. In the past I have had short cut stop working but never do what this one did.
I still have no idea where the profiles.ini is.

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

How to use Device Profiles and Viewing Conditions Profile in Photoshop Elements 11?

In trying to get to grips with the Colour management aspects of PSE11, I have encountered the following problems:
Having selected "Display" a sequence of clicks (Change display settings -> Advanced settings -> Colour Management -> Colour Management tab -> Colour Management)
gives a screen which includes the headings:
Device Profile and Viewing Conditions Profile.
1. Device Profile. Besides sRGB and ARGB, the profile list includes the profiles for all of the Epson papers. (I have an Epson Stylus Photo PX810FW).
I changed the Profile to an Epson Grayscale, this was accepted within the menu, but there are no changes from normal when I viewed the image on the Windows screen or within
PSE11. ("normal" is sRGB or ARGB).
I thought it worth a try to test that, if I wanted the display image to closely represent what I would get on a particular Epson paper, this may be a way to do it.(I suspected this approach because I have never
seen it in the literature!).
So what is the purpose of all of the paper Profiles appearing in the Display listing?
2. The Viewing Conditions Profile has also several options. I have tried to find the criteria for choosing one rather than the other, but failed to find any information. Can anyone help? I seek general guidance
rather than the details of the Profiles.
As a seperate question:
Selecting Image on the PSE11 menu across the top of the displayed image, and then Convert Colour Profile, I tried this process on an image, converting tiff to sRGB. When saved there was an extra asterisk in the saved title but in this case,
the file was still labelled tiff and there was no change in the number of Mbs. If a conversion has taken place, how is one to know? Does saving a tiff file as jpeg change its colour profile? When is it useful to use this feature?
Many thanks to all responders!

Addressing your second question, you are confusing two different things.
tiff is an image file format, as is jpeg, as is psd, as is png, as are dozens (if not hundreds, http://en.wikipedia.org/wiki/Image_file_formats) of other formats.
A colour profile represents the colour characteristics of devices so that, for example, displays know how to display the colours, printers know how to print them.
Image files MAY, but do not have to, contain colour profiles.
For details:
http://help.adobe.com/en_US/creativesuite/cs/using/WS52323996-D045-437d-BD45-04955E987DFB. html
http://en.wikipedia.org/wiki/Color_management#Color_profiles
http://en.wikipedia.org/wiki/ICC_profile
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Where in gods name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but thats is. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC

Where in god’s name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but that's it. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC. On either PCs. Both are logged in and both are registered for homesharing. however because apple keeps updating and moving things around for no reason there appears to be no way of accessing the homsharing button in the latest version of itunes. the website refers to " Once set up, all the libraries from your computers you've enabled Home Sharing on will show up in the SHARED area of iTunes:" well I have searched all over in the recent itunes versions and there is no "shared area" to be found.
Please find the attachment of a screen cap of my itunes.
If anyone can help by telling me where it has been moved to or if it even still exists that would be much appreciated.

Welcome to the Apple Community.

What is the name of the folders which are your backup of Itunes library? I am recovering from a virus, have no workable desktop in Win XP, but can search and find files and folders. I would like to move these backup files to a new computer

what is the name of the folders which are the backup of Itunes library? I am recovering from a virus, have no workable desktop in Win XP, but can search and find files and folders. I would like to move these backup files to a new computer, authorize it and sync with Iphone 3Gs and Ipod 5th gen.
I

I second the whole iTunes folder approach.
If for some reason you have split the media folder from the library files then the media folder needs to restored to the same path it used to have while the library files can be copied into the music folder of your new profile.
If in dobut, backup up the entire Documents and Settings folder before wiping the infected drive, but be selective about what you restore as many viruses drop active components capable of reinfecting the compuer in the temp folders and internet caches. It is much easier to backup more than you need than to discover after the fact that you no longer have access to some vital project you'd been storing in a folder on the desktop.
tt2

HT204368 I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

NovaRiddle wrote:
I am having trouble pairing my iPhone4 with bluetooth device. ...
Depends on the device...
Have a look here for Supported Bluetooth Profiles
http://support.apple.com/kb/HT3647

Point and find and energy profiler for N900?

hi are there any plans on a N900 version of point and find or energy profiler as i used them alot on my n95 i wound love to use them on my N900? many thanks
Nokia N900 v3.2010.02-8.203.1 RX-51

hi are there any plans on a N900 version of point and find or energy profiler as i used them alot on my n95 i wound love to use them on my N900? many thanks
As this is a users forum you need to contact Nokia/Ovi Store contact button top of the page .
jje

Name Dialing and Find button in Device Profile

Similar Messages

Maybe you are looking for