Name dos not appear

When i receive a call the name dos not appear because when i saved it in my contact list it has an Area code, and if remove the Area code then the message don’t have the contact name

There are several threads about this. Search the others in case there has already been a solution of some sort

Similar Messages

Some of my contact names are not appearing when they text message me. They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

some of my contact names are not appearing when they text message me. They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

I have this identical problem. For a while my group texts didnt show up on my ipad. Then one day they did, maybe everyone in the group started using the same os version or something. Ever since my first reply to the group there have been complaints of multiple threads. I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time) Everyone in the group has deleted the thread, we've all toggled imessage on/off etc. There still hasn't been a solution.
Any help would be appreciated.
Thanks

Last Approver name in not appearing in the shopping basket

Hi SRM Gurus,
We have Implemented N step Badi for our client .During Post Go Live we are facing this issue
We have created a shopping basket and there are 3 approvers to approve. After the first approvers is approved the name is not appearing in the Shopping basket.
We are in SRM 4.0
Can you tell what could be the reasons
G.Ganesh Kumar

Hi Ganesh,
How you fixed your problem ? Actually i am facing same problem for Bid invitation.
Regards
Abhijeet

Contact name does not appear after upgrading to iOS 5

I recently upgraded to iOS 5 and after doing so, contact name does not appear when someone calls; but text messages the name appears. I have saved all my contacts under +9 format.

This indicates that the phone was carrier locked and had been 'hacked' to unlock it. Updating the phone has re-locked it to the original carrier.
ONLY the carrier it is locked to can authorize unlocking it. Not all do so. Contact the carrier and find out what their policy is.
If it's locked to AT&T, you may as well sell it and buy a new phone. AT&T will not unlock iPhones for any reason.

All my contacts are stored with country code for eg 233 244 123456. Contact names do not appear during incoming calls. Once the country code is removed , names appear. Please help

All my contacts are stored with country code for eg +233 244 123456. Contact names do not appear during incoming calls.
Please help

http://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0

CDs loaded, Artist name does not appear in ARTISTS list

Among all the CDs I've loaded and songs purchased, I have 2 Carly Simon
CDs on my video iPod. However, Carly Simon's name does not appear in my
list of ARTISTS in the Music Menu.
I did a sync with my iTunes list and the songs are indeed loaded.
Why is her name missing from the list and how do I get it back?
It used to be there!
Thanks-

I just found the answer on the discussion board.
In my SETTINGS I had compilations turned on.
When I switched it off, Carly Simon was back in my
ARTISTS list.

Column Name is not appear

Hi Experts,
I have using this query for generate XML File through Store Procedure
Store Procedure Runing Succesful. For using below query Execute whole Store Procedure
Problem Path is Generate but Coloumn Name is not appear in it.
exec [dbo].[ICR_Rpt_Form2Rpt_XML] '20110722', '20110722'
Please help me out.
BR,
Manish Pandey

set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[ICR_Rpt_Form2Rpt_xml] @FrmDate nvarchar(50) ,
@ToDate nvarchar(50)   AS
select OINV.Docentry, I.Linenum,
'0' as [Sr.],OINV.U_ICR_WHS as SeriesName,
SeriesName+' '+convert(varchar(50),OINV.Docnum)as [DocumentNo.],
I.Docdate as [Date],
I.ItemCode as ItemCode,
I.ItemName as [ItemName] ,I.BatchNum as [BatchNo],
O.U_ICR_TFFNUM as [TarriffClass],V.Quantity as [Quantity] ,((O.U_ICR_BED/O.U_ICR_STOCK)* V.Quantity) as [Duty] ,
((O.U_ICR_ECESS/O.U_ICR_STOCK)* V.Quantity) as [Edu.Cess],((O.U_ICR_CESS/O.U_ICR_STOCK)* V.Quantity) as [S.H.Cess],
((O.U_ICR_AED/O.U_ICR_STOCK)* V.Quantity) as [SplCVD],O.U_ICR_INVNODATE as [supplierNo.],
O.InDate as [Date1],O.CardName as [Manufacturer],U_ICR_STOCK as [Quantity1],
U_ICR_BED as [Duty1],U_ICR_ECESS as [Edu.Cess1],U_ICR_CESS as [S.H.Cess1] ,
U_ICR_AED as [SplCVD1],U_ICR_ETRYNOOE as [Ent.No.1], U_ICR_PAGEOE as [P/ENo.1]
from OIBT O ,IBT1 I,OINV,NNM1 ,INV1 V ,DLN1 D where D.LineNum=v.BaseLine and
D.TrgetEntry=v.DocEntry and D.ItemCode=v.ItemCode and I.BaseLinnum= D.LineNum and I.BaseEntry=D.DocEntry and
O.whscode=V.whscode and O.U_ICR_STOCK>0 and U_ICR_MODVET ='Y' and
( (I.bASEtYPE=13 and (V.baseType=17 or V.baseType=-1 or V.baseType=23))   or (V.bASEtYPE=20 )) and
OINV.Docentry=V.DocEntry and OINV.Docnum =I.BaseNum   and I.Direction=1 and
O.Itemcode=I.Itemcode and O.BatchNum=I.BatchNum   and NNM1.Series=OINV.Series and I.DocDate between @FrmDate and @ToDate and OINV.docdate between @FrmDate and @ToDate and O.U_ICR_STOCK != 0 and oinv.docentry not in (select baseentry from rin1 where basetype=13) group by OINV.U_ICR_WHS,O.U_ICR_STOCK, OINV.Docnum,OINV.Docentry, I.Linenum, OINV.Docentry,I.BaseNum ,O.U_ICR_INVNODATE,I.Docdate ,I.ItemCode ,I.ItemName ,I.BatchNum ,U_ICR_TFFNUM,U_ICR_SUPPCODE,O.InDate,O.CardName,U_ICR_STOCK,U_ICR_BED,U_ICR_CESS,U_ICR_ECESS,U_ICR_ETRYNOOE ,U_ICR_PAGEOE,V.Quantity,I.LineNum,SeriesName ,U_ICR_AED union select OINV.Docentry, I.Linenum, '0' as [Sr.],OINV.U_ICR_WHS as SeriesName, SeriesName+' '+convert(varchar(50),OINV.Docnum) as [Document No.],I.Docdate as [Date],I.ItemCode as ItemCode,I.ItemName as [ItemName] ,I.BatchNum as [BatchNo],O.U_ICR_TFFNUM as [Tarriff Class],V.Quantity as [Quantity], ((O.U_ICR_BED/O.U_ICR_STOCK)* V.Quantity) as [Duty] ,((O.U_ICR_ECESS/O.U_ICR_STOCK)* V.Quantity) as [Edu.Cess],((O.U_ICR_CESS/O.U_ICR_STOCK)* V.Quantity) as [S.H.Cess],((O.U_ICR_AED/O.U_ICR_STOCK)* V.Quantity) as [Spl CVD],O.U_ICR_INVNODATE as [supplier No.],O.InDate as [Date1],O.CardName as [Manufacturer],U_ICR_STOCK as [Quantity1],U_ICR_BED as [Duty1],U_ICR_ECESS as [Edu.Cess1],U_ICR_CESS as [S.H.Cess1] ,U_ICR_AED as [SplCVD1],U_ICR_ETRYNOOE as [Ent.No.1], U_ICR_PAGEOE as [P/ENo.1]
from OIBT O ,IBT1 I,OINV,NNM1 ,INV1 V,DLN1 D where D.LineNum=v.BaseLine and D.TrgetEntry=v.DocEntry and D.ItemCode=v.ItemCode and I.BaseLinnum= D.LineNum and I.BaseEntry=D.DocEntry and U_ICR_MODVET ='Y' and ( (I.bASEtYPE=15 and V.baseType=15 ) ) and OINV.Docentry=V.DocEntry and V.baseRef =I.BaseNum   and I.Direction=1 and O.Itemcode=I.Itemcode and O.BatchNum=I.BatchNum   and NNM1.Series=OINV.Series and O.WhsCode=V.WhsCode and I.DocDate between @FrmDate and @ToDate and   OINV.docdate between @FrmDate and @ToDate and O.U_ICR_STOCK != 0 and oinv.docentry not in (select baseentry from rin1 where basetype=13) group by OINV.U_ICR_WHS,I.Linenum,OINV.Docentry,I.BaseNum ,O.U_ICR_INVNODATE,I.Docdate ,I.ItemCode ,I.ItemName ,I.BatchNum ,U_ICR_TFFNUM,U_ICR_SUPPCODE,O.InDate,O.CardName,U_ICR_STOCK,U_ICR_BED,U_ICR_CESS,U_ICR_ECESS,U_ICR_ETRYNOOE ,U_ICR_PAGEOE,V.Quantity,I.LineNum,SeriesName ,U_ICR_AED,OINV.Docnum order by OINV.Docentry
for xml path('xml'),type
BR,
Manish Pandey

HT4623 when i go to settings general update settings dose not appear . how can i update my phone

when i go to settings<general< update settings dose not appear
how can i update my software /

Go back to the article you asked this question from, ignore the instructions for updating it wirelessly, scroll down, and follow those for updating it from iTunes on a computer.
(81448)

While connecting to itunes mesgae appears the SIM card inserted in this iphone dose not appear to be supported what to do

while connecting to itunes mesgae appears the SIM card inserted in this iphone dose not appear to be supported what to do

I'm sure someone will reply to one of your two OTHER nearly identical threads.

Contact names do not appear when composing an email

When I click to compose an email, names of my contacts do not appear when I start typing ...only email addresses...and they look shaded out. I have gone into contacts and confirmed that names are all correct, and looked through other discussions, but usually this seems to happen with text messages. I don't ahve a problem with the contact names appearing when I text...only when I try to compose a message. Its very annoying because I don't always remember people's email - I'd like to just start typing their name and ahve the contact appear. Iphone 5.

Hi there basecampmason,
I would recommend force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W.

When i tried to add new contact in my ip5, the keyboard to key in the name did not appear. Pls help.

When someone called me, i tried to add his phone number into my contact, but the keyboard did not appear when i wanted to key in the names or other details.

Hi, tenangaku.
Thank you for visiting Apple Support Communities.
I would recommend closing all applications in multitasking and power cycling the device.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H.

Artist name does not appear in artist list but album name is in album list - Ipod Classic 160gb

For an album I have imported onto my iPod from iTunes, the album name is in the Album list but the Artist name is not on the Artist list. I have tried deleting the album from the iPod and re-adding from ITunes but the same result. It is a single artist album, so the artist name is exactly the same for each track; all the tracks are there. Big nuisance as I use artist name a lot to find specific albums.

ecb31 wrote:
this did not work for me,
Possibly because your problem (you say) was the album name. The original post was about the artist name and is therefore a different problem.
ecb31 wrote:
...I had to fill in the Album for each song, then it showed on my ipod, for ones I did ot know, I just put bloody apple.
Huh?
Let me get this right, you had lots of songs without the album name in them, so you filled in the album name yourself - if you knew the album name. If you didn't know the album name, you then entered the same text on all the rest of those songs. So now, you must have a lot of songs all on the same album, even though they're not meant to be - and - you've put text in to a lot of your songs that will remind you forevermore, of just how unhappy you are.
Well! &
My question to you is; where did you get the songs from, that they came without the correct information in them?
If you imported them from a CD, iTunes will go and get the information for you.
If you bought the songs from the iTunes Store, or another music retailer, the information is in the digital file that you purchased.
How therefore, does so much of your music appear to be incomplete?
Am I missing something, or have you simply failed to explain the porblem properly?

SMARTFORM Printing: Invoice header company name does not appear

Hi Experts,
I have a problem with the invoice SMARTFORMS whereas when the invoice exceeds more than 1 page, the company name at the left topmost part of the form doesn't appear. The window that contains this should only appear in the first page and when I'm printing an invoice of more than 1 page, the company name doesn't appear in the print-out.
Any idea what would be the problem? or how to resolve this? Thanks in advance
Best Regards,
Kurtt

Hi Experts,
Thanks for taking time to help on this. Yes indeed it is appearing on the first page only. The problem is that the text element that contains the company name in that window doesn't appear if the invoice exceeds 1 page.
Let say if the invoice to be printed has 2 pages then the company name doesn't appear.
But if there's only 1 page to be printed, the company name appears.
No condition specified in the text element nor in window.
Any idea? Thanks!
Best Regards,
Kurtt

When receiving a call on my iPhone 4s the contact name does not appear

when receiving a call on my iphone 4s the conact name does not appear

This should fix it:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again to verify that it's fixed.

Problem with Calendar and drag and drop a name to a Time spot with palm desktop. Full name does not appear only last name.

Im having a problem with the palm desktop. When in “Contacts” and I list (LastName,First name) and then I move to the Calendar and drag and drop a name to a Time spot Only the LAST name of the Person appears. How can I fix this so that I can see there full name ?
Also when If list (Company,Last Name) then go to calendar Some of my contacts are out of order but if I drag and drop them into the calendar day the full name appears. Is there any why of fixing this ? Or having it work properly ?
Im running XP pro
Palm Desktop Version 4.1.4
Post relates to: Treo 680 (Rogers)
Message Edited by corrado on 07-21-2008 08:55 AM

Any Idea how to fix the problem that I am getting when using the (Company,Last Name) and the contacts being out of order in the calander ? I have some last names starting with A then it goes to D then a B then a stack more A and none of then have a Company field filled out in them in them...
Thanks for looking into that for me but it seems really stange to offer the option but not put in the first name in the calander when you drage the name over. I hope this is fixed in the future. Can anyony sugest another desktop platform I can use if I cant fix my problem with the (Company,Last Name) problem?
Post relates to: Treo 680 (Rogers)

Name dos not appear

Similar Messages

Maybe you are looking for