Name field is not updating in CRM BP

Hello Experts
We have created a customer in ECC with the Account Group say Z008 (Say Forwarding Agent). The NAME field contains value MY PLC at the time of customer creation through XD01. The customer no is 123
The BDOC is getting generated in corresponding CRM system and also shows the BP with the number 123 and the name as MY PLC.
Issue
When we have changed the customer name in ECC through XD02 and maintain as MY PLC - Update. Again BDOC is generated, and this BDOC contains the change in value as MY PLC - Update. (BDOC is fully processed - green)
But when i open the BP - 123 in CRM, the name still shows as MY PLC only. The "- Update" is not showing in the name field.
Kindly help.
Regards

Hi,
There is no Z-function module in my case. However, I noticed some patterns on the data-> those with the field RUFNM updated in R/3 will not get updated. Any possible reason for this?
Btw, we are not in ECC6 environment yet. (only 4.6C for R/3 and 3.0 for CRM)
In fact, I have another similar issue -> BP cannot even get updated in CRM if Industry Code in R/3 is filled.
Appreciate advice in this area...
Thanks.
alice.

Similar Messages

Nokia E52 Message Sender Name Field is not updated...

Nokia E52 Message Sender Name/Field is not updated automatically on Firmware 054.003!
Issue 1: Message Sender Name/Field is not updated automatically after changes made in contacts.
e.g. Message send by Mr. A is displayed in inbox, however when same contact changed to Mrs. AB in contacts does not update sender name/field inside inbox. Sender name remains Mr. A physically on handset. However the changes made to contacts and Message Sender Name/Field is updated automatically on use of Nokia PC Suite 7.1.60.0 and Nokia Ovi Suite 3.0.0.290 but not on phone.

Thanks for sharing the answer here, it is really helpful for others with the similar issue.
Qiao Wei
TechNet Community Support

A contract modified in IS-U not updated at CRM

Hi!!!
I'm try to update the data of crm contract from sap isu contract, but isn't works fine, the status and the description of CRM contract for example is not updated. The Bdoc SI_CONTRACT is generated correctly, and the Badi's DOWNLOAD on ISU and CRM are enhanced with the fields, but the info is not updated in crm when initial load is launched or when a move-out it's do it in isu.
Can you help me please?
Regards,
David

Hi,
Please tick the below checklist and tell me if they are set:
1. Goto R3AC4. Is entry for object class BUPA present in the List. If not, add a new entry: Object class BUPA, RFC destination (destination of ISU)
2.goto transaction SMOEAC and check if ISU site is subscribed is for BUPA_MAIN. If not, please do the same.
3. Change and save a BP and check the status of the BDOC. Is it green? if not, let me know.
4. goto ISU transaction SM30. table CRMRFCPAR. Is RFC destination for CRM maintained. If not, please do the same.
Let me know if these things are in place.
Best Regards
Kaushal

Vendor field not updated in CRM pricing condition table

Hi,
We have maintained condition table with Material and Vendor fields in ECC and table is active
After replicating this table from ECC to CRM, vendor field not updated in table and it is inactive.
There is any mapping settings required to update vendor field in CRM table from ECC.
Please help me out to solve this issue
Regards
kishore kumar

hi, the data field of vendor is a standard one or custimizing one?
I remeber there is a data mapping setting in CRM, for condition field. If you want to mapping a ERP standard field to a CRM custmizing one, you need to setting your rule in it. Maybe you can find it in SM30 view.
I can't login a CRM system now, so sorry for not offer your the view name.

Values not updated in CRM ,CRM_BADI_BUPA_MOBILE_CHANGE for Sybasemobile

Hi All,
We are unable to make changes in CRM
Implemented the Change BADI CRM_BADI_BUPA_MOBILE_CHANGE (For language and timezone fields).
please check my previous post.
Implementing CRM_BADI_BUPA_MOBILE_CHANGE for Sybasemobile
On mobile made changes for these fields ,checked in DOE ,CE structures ,they are not updated with new values.
checked the FM CRM_BUPA_MOBILE_CHANGE ,BADI is getting triggerd.
How the dat flows ..mobile->doe ->crm ?(for update values)?
Thanks,
Anitha.

Hi siva,
Thanks for the information.
data : ls_address TYPE bapibus1006_address,
CALL FUNCTION 'BUPA_ADDRESS_READ_DETAIL'
      EXPORTING
        iv_partner           =ls_ce_bupa_hdr-partner
        iv_xaddress           = 'X'
      IMPORTING
        es_address            = ls_address
      EXCEPTIONS
        no_partner_specified = 1
        no_valid_record_found = 2
        OTHERS                = 3.
loop at ce_bupa_header into ls_ce_bupa_hdr.
    IF ls_ce_bupa_hdr-FIELD_NAME = 'LanguageKey'.
      ls_address-languiso = ls_ce_bupa_hdr-FIELD_VALUE.
    elseIF ls_ce_bupa_hdr-FIELD_NAME = 'ZTIME_ZONE'.
      ls_address-time_zone = ls_ce_bupa_hdr-FIELD_VALUE.
    endif.
      endloop.
CALL FUNCTION 'BUPA_ADDRESS_CHANGE'
EXPORTING
     IV_PARTNER                      =ls_ce_bupa_hdr-partner
      IV_PARTNER_GUID                 =
      IV_ADDRNUMBER                   =
      IV_ADDRGUID                     =
IS_ADDRESS                      =
       IS_ADDRESS_X                    =ls_address
      IV_DUPLICATE_MESSAGE_TYPE       =
      IV_ACCEPT_ERROR                 = ' '
U mean to say this?.
Will try executing and come back.
Thanks.
Anitha.

File Path and Name field does not display correct path

We are using Crystal 2008 along with VS 2005. We embed the special "File Path and Name" field inside our report and it displays the correct path when viewed inside Crystal reports:
C:\Program Files\reports\Chart.rpt
When run through the web and viewed in the DHTML viewer, the file name and path appear as follows:
C:\Windows\TEMP\Chart {02152A43-3339-4C03-A50A-E281E1D391AF}.rpt
How can this be corrected?
Thanks in advance for any assistance.

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

Aggregate value of a transient field is not updated from cache

Hello together,
A view object has a transient field which display the count of records from a view accessor. In the EO for the view object ( of the view accessor) opearations on rows are perfomed from a different view object, this changes are not reflected in the transient field value.
I know is not very clear,here is sample:
Woker VO
-Worker EO
Worker2Department VO
-Worker2Department EO
Department VO
-Deparment EO
-workerCount: WorkersCounterViewAccesor.count("WorkerID")
WorkerCounter VO
-Worker EO
-Worker2Department EO
attribute binding: DepartmentID
If from Worker2Department records are deleted or inserted, the value of workerCount is not updated.
I've try to executeQuery on each view object,without success. I've notice that the WorkerCounter VO is having always the same records count after Worker2Department VO is updated.
If the method getDBTransaction().postChanges() is invoked, then the data is correctly fetched but then there are different other problems, and i would like to avoid using of postChanges().
My question is: why when rows are inserted/removes into/from a view object the changes are not visibile on different view objects declared for the same entiy object? Or how to make sure that the changes from an entity object are reflected in each view object that are using it?
Thank you a lot,
Bogdan

Hi,
If you place the 0WBS_ELM_EX in the ODS ,either in the key field or in the data field , you can find it as a charecteristic in the report and you can drag it into the rows.
To reflet the changes that you made to the masterdata , you need to run the attribute change run every time you load the data .
regards,
haritha

Form with report, update field in the form = field is not updated in table

Hi,
I have a form with report. On Primary Key in the report is a link to the form. I select one row in the form by choosing the link in the report. Then I update a field in the form and press "Save". I see the success message "Action processed" and I'll be back in the report. I see the field in the report with it's old content. It is not updated. I don't understand why. Can anybody help me?
Thanks Daniela

Daniela,
Is the form field source set to the proper database column? It's either not properly defined or your Save button and the builtin update process have somehow become disconnected. Check to make sure that the Save button is set to perform an Update in the database operations setting.
Earl

Org Structure not updating in CRM Correctly

Hi Experts,
We have an issue with their ALE transfer of the HR Org Structure (from the HR box) to the structure in the CRM box.
It is (apparently) randomly not updating certain details. Org units and their relationships which are changed in ECC are not getting replicated into CRM. The relations with the parent node are not flowing to CRM in most of the cases.
e.g. a position change won't come or new org assignment.
Every time we are pulling using PFAL for missing relations and new assignments but client is not happy with the persistent issue.
Can anyone give me any assistance on what else I should be looking at to troubleshoot random missing data in the ALE process?
Many thanks in advance.
Vijay

Hi Maggi,
We are using HRMD_ABA. .. is that what u r asking..?
Please let me know if you need more details.
Thank you..
Vijay

BUDAT and TPARTDOCNO field is not updating in HRPAD25 table

Hi,
I am facing one weird issue where in HRPAD25 table field BUDAT and TPARTDOCNO is not updating for corresponding ADATNR of HRP1001 table.
Due to this when I am doing course follow -upi(marking attendance) system is throwing an error.
Kindly help ,why this is happening
Regards,
Sadaf

Hi Sadaf
Are you using the LSO transactions to book the person on the course ?
Please do not use TEM transactions i.e. PSV1, PVCT etc. for trainings.
Pl refer
Follow Up Course - Dump - ERP Human Capital Management - SCN Wiki
Regards
Chetan Bajaj

Reference field is not updating in VBAK table

Hi Experts,
I am using SD_SALESDOCUMENT_CREATE bapi for Credit Memo Creation .
but the field XBLNR is not updating in the table vbak.
Kindly help me to sort out this issue.
Thanks in advance.
In which field i should pass the value to update in the table vbak.
Regards,
Ajay.
Edited by: srinivasan12345 on Nov 14, 2011 9:21 AM

Hi,
follow this,may help u..
Re: Credit Memo Creation
thanks & regards.

Edit in datasheet field is not updated in real time

Hello,
I have SharePoint 2007, a list viewed in Edit in DataSheet and a workflow attached to the list which updates a field FirstTitle in the list when the item is created.
The problem is that, while in Edit in Datasheet view, the field FirstTitle is not updated in real time so the workflow starts again and again because the field is still viewed as empty. The users keep receiving the error message "Your changes conflict
with those made concurrently by another user" (the other user being actually themselves). So they have to exit Edit in Datasheet and enter again in order to have FirstTitle field refreshed and that is annoying and totally unproductive.
I tried from SharePoint designer different checks, I used different actions like wait until item is changed and then stop but nothing worked. Is there any workaround to this ?
Thanks in advance,
Teddy
Able was I ere I saw Elba

Thanks for sharing the answer here, it is really helpful for others with the similar issue.
Qiao Wei
TechNet Community Support

Tax field is not updated in COPA documents

Hi
There is a Value field for Tax is not updated in COPA documents due to missing configuration in KE4I. Now the tax field is updatating properly after completed the configuration in KE4I.
But we have couple of COPA documents which are generated (source ) through SD billing. And we have entered proper condition type in Sales order. It is calculating the Tax amount based on condition type in sales order.
Now we want to update the Tax value filed information into COPA documents . Please let me know the procedure to update the Tax value field in COPA documents.
Thanks
Richa

Hi,
reverse/repost the docs again to CO-PA using KE4S.
best regards, Christian

Field value not updated in Dialog Programming

Hi experts
          My problem is when i change the field value in dialog programming, the text value is not updated, its showing the same value what exist in database.
   I have done coding as follows, what i need to change in coding, Pls give me the suggestion.
PROCESS BEFORE OUTPUT.
MODULE STATUS_1200.
PROCESS AFTER INPUT.
CHAIN .
    FIELD : zrecpt-zrno.
    MODULE vali_zrno ON CHAIN-INPUT.
ENDCHAIN.
module header_data10.
MODULE STATUS_1200 OUTPUT.
    SET PF-STATUS 'ZRECT'.
    SET TITLEBAR 'ZRECT'.
ENDMODULE.
MODULE vali_zrno INPUT.
if zrecpt-zrno is not initial.
    select single * from zrecpt
                    where zrno = zrecpt-zrno.
endif.
ENDMODULE.
MODULE header_data10 INPUT.
CLEAR : it_zrecpt.
REFRESH : it_zrecpt.
MOVE-CORRESPONDING zrecpt TO it_zrecpt.
APPEND it_zrecpt.
ENDMODULE.
Thanks in advance.
Regards
Rajaram

Hello...
IN PAI,,
You were not updating into any database..
you were just appending to an internal table...
now either move the internal table values to the database ...
or you can simply move from the values entered...[text boxes ]
pls chk.....

Date of Last.Del field is not updated in EKEK table

Hello All,
We have one date update problem for one Scheduling agreement, the field is LFDKD (Date of Last.Delivery) in the table EKEK -Header Data for Scheduling Agreement Release and this date hasnt been updated only for one SA since 2008 , it remains as it is like 18.02.2008, but the date of last field (LWEDT) is updated correctly till date. So due to this problem , the SA release is sent to the vendor through EDI and the date of last delivery is sent wrongly in 2008 date even though after that many goods receipt has been done for this SA. Any idea why it didnt get update till date ?
Thanks in Advance
Benny

Hello Benny,
Please check if the following notes can help :
1337084 Release header contains doc. date instead of delivery date
1309001 Incorrect date for last goods receipt in sched. agreement
Regards,
Mauro

Name field is not updating in CRM BP

Similar Messages

Maybe you are looking for