Name issues in Certification SABE201 & SABE301

Hi Team,
Recently I have completed my BOXIR2 SABE201 & SABE301 certifications, my name in both of the Score Cards are showing wrong. I have contacted Pearson VUE but they advised me to contact Business Objects. Not sure whom to contact to amend my name in Score Cards.
Please advice i'm really in panic.
Regards,
Aneel

Hi,
1. http://www.sap.com/services/education/index.epx
2. Choose your Country
3. Click "Contact / Services"
4. Click "Contact"
There you should find a phone number and an email adress.
Regards
-Seb.

Similar Messages

Firefox does not recognize SSL Certificate issuer Entrust Certification Authority – L1K, but Entrust Certification Authority – L1C is ok?

We have a new Entrust SSL Certificate with issuer Entrust Certification Authority – L1K which Firefox does not recognize. Internet Explorer and Chrome are ok.
On a different system we have an Entrust SSL Certificate with issuer Entrust Certification Authority – L1C which is ok with Firefox.

Did you verify that all intermediate certificates are installed on the server?
You can inspect the certificate chain via a site like this:
*http://www.networking4all.com/en/support/tools/site+check/
*https://www.ssllabs.com/ssltest/

Client System health certificate name issue

Hi,
System health certificate is generated using HRA server name for clients system.
There is no event log error for this. Can anyone suggest what can be the issue here.
Thanks,
Sridhar
Sridhar

Hi,
Could you offer more information about your environment? Such as your HRA configuration screenshot, now we assume you are using the intranet enterprise CA, because the HRA
will only request health certificates from the CA configured first in the order, unless that server is unavailable or has been identified as unresponsive, therefore maybe you have configure the incorrect CA order.
You can use the following procedure to modify the priority of CAs used by HRA, or to remove CAs from the HRA configuration. HRA will only request certificates from the first
CA configured in the list, unless that CA has been marked as unavailable.
To configure the order or to delete certification authorities using the Windows interface
1.Open the HRA console.
2.In the console tree, click Certification Authorities .
3.Right-click a CA name in the list of servers. Click Move Up to increase preference for this server in the order. Alternatively, click Move Down to decrease preference for
this server in the order.
4.To delete a CA from the list, right-click the CA name, and then click Delete .
The related KB:
Configure NAP Certification Authority
http://msdn.microsoft.com/en-us/library/cc731916.aspx
More information:
The Cable Guy: DirectAccess with Network Access Protection (NAP)
http://technet.microsoft.com/en-us/magazine/ff758668.aspx
NPS Best Practices
http://technet.microsoft.com/en-us/library/cc755120(v=ws.10).aspx
Certificates and NPS
http://technet.microsoft.com/en-us/library/cc772401(v=ws.10).aspx
Overview of HRA
http://msdn.microsoft.com/en-us/library/cc731872.aspx
Resources for using certificates with NPS and NAP
http://blogs.technet.com/b/nap/archive/2008/12/19/resources-for-using-certificates-with-nps-and-nap.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Office Web Apps Server Name issue with Sharepoint 2013

I have a POC Lab setup for SharePoint/OfficeWebApps with SSL offloading. I am using IIS reverse proxy for my SSL offloader. Most systems can connect to SharePoint and OWA through the Loadbalancer and create documents as desired. The
configuration is as follows:
DNS points:
sharepoint.contoso.com to the reverse proxy address that handles sharepoint.
owa.contoso.com to the reverse proxy address that handles owa.
My OfficeWebApps farm uses an internal and external url of
https://owa.contoso.com and uses ssloffload.
My SPWOPIBinging connects to owa.sharepoint.com (through the reverse proxy) and is configured with the external-https zone.
The name of the OWA server is nyc-owa1.contoso.com.
The issue is as follows:
If I flush my dnscache before connecting to
https://sharepoint.contoso.com, and then use OWA in sharepoint, my client DNS cache will list sharepoint.contoso.com, owa.contoso.com AND nyc-owa1.contoso.com!
Where is is getting the name of the actual owa server?
If I simulate an Internet client that cannot resolve the internal name nyc-owa1.contoso.com, but only the public names of sharepoint.contoso.com and owa.contoso.com, the client cannot successfully edit a new or existing file with OWA, the browser hangs with
Java errors ('SYS' is undefined etc.)
When I add either the real IP address of the server nyc-owa1.contoso.com OR the reverse proxy address for nyc-owa1.contoso.com to a hosts file, the client works normally.
I would like to know how the client is getting the OWA server's name and how to control that behavior.
Thanks for reading this!!
-Scott

I'm glad to here that the problem has been fixed. Thank you for sharing your experience here, it will be helpful to other community members who have similar questions.
Cheers,
Steve Fan
TechNet Community Support

Report server name issue

Dear All,
I am stucking with the following problem,
I have deployed my ERP apllication (developed in oracle forms & reports 10g) on oracle apllication server 10g forms & report services. my apllication server has two LAN card. out of two one has been configured with statis IP for web access. but while running report from parameter form i am taking report url from table. table contain report server name as my local server name.
My problem is,
If i am accessing erp from web using static ip and running report then server name is not recognized
because it is my local server name coming from table. so for that every time i need to change report url & replace server name with statis ip in browser addr for web users.
Please guide me what should i do to resolve this issue.
Your reply would be greatly apprecited.
Thanks

If "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials. They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
database. This prevents the double hop.
If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
these stored credentials each time to authenticate to the database engine and query the data. Users running the report are not prompted to provide credentials. With this option you can use an Active Directory or SQL Server account.
In order to access/run the report, a user will need to authenticate to SSRS. There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report. You can also provide
direct links to reports that users click in a document or application. At this point the user is typically still prompted to authenticate to SSRS. You can also programmatically call the report using API's and essentially build a proxy that authenticates
to SSRS and open the report.
Not sure if that answers your question.

Font name issue in Acrobat XI pro

Hi All
While checking the PDF font properties in Acrobat XI it only shows the font family name. Not the full name. In Acrobat X it was perfect. Kindly refer the image below marked in Red. The Actual font name is "Agenda Light Extra Condensed Italic", but the property box shows only Agenda and Italic is hi-lighted. The document font properties shows the correct name. Have any one experienced these kind of issues? Seeing the full font name is very important to me since I am in the position of QC process before print.
Your suggestions are most welcome.
Thanks in advance
arul

What you are actually looking at is the text edit feature which is admittedly not all that robust in terms of how it provides access to fonts.
If you are trying to check the actual font usage for particular text, you should go to Output Preview and change the Preview mode from Separations to Object Inspector. Click on the text you wish to examine and this tools will show you exactly which font is being used to render the text with the full font name, point size, etc.
- Dov

WSDL, custom datatypes, fault element name issues

Hello all,
I am having a LOT of problems with BEAs webservices. I am posting
this here in the hope that someone can help me and tell me what I am
doing incorrectly. I am running
WebLogic Server 7.0 SP1 Mon Sep 9 22:46:58 PDT 2002 206753
WebLogic XMLX Module 7.0 SP1 Mon Sep 9 22:54:41 PDT 2002 206753
Background:
My goal is to make my company's product web services aware. I take an
EJB, try to run it through the standard ant tasks and generate a web
services accessible EJB. Sounds pretty easy, but complex types seem
to make this quite difficult.
I have been able to create a web service accessible EJB (only since
7.0.1), but I am quite unhappy with the quality of what I am able to
produce.
I have a datatype which acts as a key, but it does not follow the
javabeans idiom - i.e. it does not have a default constructor or
accessor methods and I am not in the position to change it. I have
created a codec for this class which works and an xml schema (both by
hand). Its name is AgentKey. I have also had to use the autotyper to
create codecs and typemapping entries for java.util.Properties,
I can connect using the WebLogic classes and I am now trying to
interact using MS Excel and Apache's Axis as my test clients.
Issues:
My first question deals with generating a client. There seem to be
two ways to generate a client. Firstly via the <client> subtask of
<servicegen><service>, the second way via <clientgen> task. Since I
am using a custom data type (AgentKey) I have to manually insert the
AgentKey schema into the web-services.xml file generated by
servicegen. When I try to generate a client via the
servicegen/service/client task there is no opportunity for me to
insert this datatype schema information and I therefore get the
following messages (lots of them, but I'm only including one):
[servicegen] WARNINIG: Unable to find a javaType for the xmlType:['java:net.agentis.apml.runtime']:AgentKey.
Make sure that you have registered this xml type in the type mapping
[servicegen] Using SOAPElement instead
BTW: I am also receiving the same problem with java.util.Properties.
BTW: WARNING is misspelt
If I attempt to generate a client class via the <clientgen> task, I
need to supply either a wsdl or ear file as a parameter. I cannot
supply a wsdl file because I haven't deployed the EAR yet (and I don't
want to until the EAR has the client classes in it), and I can't
supply the EAR because I want the ear to include the client classes.
It is a bit of a catch 22 situation. Is there a solution I can't see?
NOTE: it would be very, very nice if you added a schemaMapping
attribute to the <servicegen/service> task so the web-services.xml
file didn't have to be manually hacked. Something similar to the
typemapping attribute already in the servicegen/service task would do
it.
My next problem deals with the validity of the WSDL. I am seeing that
the WSDL created has exceptions defined multiple times. I saw a
message from Manjo saying that it looked like a bug. I agree and
would like to get a copy of the patch. On a more significant note,
when is either SP2 or 7.1 due for release?
Another problem with the WSDL (once you have cleansed the multiple
exception messages) is that the fault elements of the
binding/operation elements require names and they don't have any. For
example, this is straight from the deployed EJB WSDL file:
<binding name="ExampleAgentPortSoapBinding" type="tns:ExampleAgentPort">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="serviceWithPrimitiveDatatypes">
<soap:operation soapAction="" style="rpc"/>
<input>
<soap:body use="encoded" namespace="http://sillyurl.com/reallysilly"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
<output>
<soap:body use="encoded" namespace="http://sillyurl.com/reallysilly"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
<fault>
<soap:body use="encoded" namespace="http://sillyurl.com/reallysilly"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</fault>
</operation>
<operation ...
The schema definition at http://schemas.xmlsoap.org/wsdl/ says the
fault element require a name attribute:
<complexType name =" tBindingOperationFault">
<complexContent>
<extension base="wsdl:tExtensibleDocumented">
<attribute name="name" type="NCName" use="required"/>
</extension>
</complexContent>
</complexType>
The name of the fault should be the same name as the fault in the
portType definition. In my example the name is "AgentisException" as
evidenced by this snippet:
<portType name="ExampleAgentPort">
<operation name="serviceWithPrimitiveDatatypes">
<input message="tns:serviceWithPrimitiveDatatypes"/>
<output message="tns:serviceWithPrimitiveDatatypesResponse"/>
<fault name="AgentisException" message="tns:AgentisException"/>
</operation>
Once these changes have been made then the WSDL will validate. Are
there plans to fix these bugs?
On a different note, when I try to interact with a method that uses a
custom data type, such as AgentKey, via the "WebLogic Webservice
standard testing home page" the custom data type without a default
constructor cannot be rendered correctly. For instance, the AgentKey
value is:

<agentKey/>
Since I can't deploy a valid WSDL, I can't get either Axis or Excel to
connect to my web services.
When I attempt to invoke Axis' (beta 1.1) wsdl2java I recieve the
following message.
java.io.IOException: ERROR: Fault is missing a name= attribute in operation
"serviceWithPrimitiveDatatypes", in binding {http://sillyurl.com/reallysilly}ExampleAgentPortSoapBinding.
This seems understandable considering the issues I mentioned earlier.
Unfortunately Excel doesn't really give me anything to go with. If I
type in the WSDL URI then it will give me a list of methods I can
invoke, but if I try to add the service I get the very unhelpful "The
Web Service References Tool could not generate the requested code.
Any changes that were made to your project have been rolled back."
Any help with those two issues would be greatly appreciated also.
One final issue is that I cannot seem to fix is taskdef'ing
<servicegen> properly from Ant. I can do the actual taskdef but then
it cannot find classes from within the weblogic.jar. If I run the
setExamplesEnv.cmd first the I don't need to do the taskdef and
everything works fine. Has anyone else had this issue? (we can't run
that command on our clients desktops before we build our build scripts
- anyway, I've put it down to one of those weird Ant classpath
issues.)
In summary:
Problems I can see and would like some help on are:
- multiple exception messages
- fault operations with no name
- the ability to generate client code with complex data types before
the EAR is deployed.
Could the product team add
- a clean way to add in schema datatypes without having to manually
hack the web-services.xml file.
I know this has been quite a long email, but it has been months in the
making. Anyone's time would be greatly appreciated.
Mark Mansour
Agentis Software
[email protected]

Hi Mark,
From your base post:
My next problem deals with the validity of the WSDL. I am seeing that
the WSDL created has exceptions defined multiple times. I saw a
message from Manjo saying that it looked like a bug. I agree and
would like to get a copy of the patch. On a more significant note,
when is either SP2 or 7.1 due for release?I would recommend starting here with support since getting valid WSDL seems to be the root of most of
your issues.
Concerning the upcoming release, I believe it is scheduled for late this quarter; contact Michael
([email protected]) for more information.
Also, at the bottom of this post:
I would just like to see an automated way to do this (I've had to write my own
utility to do this for me :(Does the autotype ant task help in this situation? Have you taken a look at this?
http://e-docs.bea.com/wls/docs70/webserv/anttasks.html#1080062
Thanks,
Bruce
Mark Mansour wrote:
Hiya Bruce,
I will try and get some time to follow this up with the support people too.
In response:
Problems I can see and would like some help on are:
- multiple exception messages
In your client code, you can set the following property to avoid the exceptionmessages so that the typemapping
registry can be setup.
//dont parse wsdl till we set the typemapping
System.setProperty( "weblogic.webservice.servicenamechecking","false" );
This is not a client issue. The WSDL is generating incorrect WSDL. Here is a
little snippet :
<message name="AgentisException" >
<part name="AgentisException" xmlns:partns="http://www.w3.org/2001/XMLSchema"
type="partns:string" />
</message>
<message name="setTraceLevel" >
<part name="agentKey" xmlns:partns="java:net.agentis.apml.runtime" type="partns:AgentKey"
/>
<part name="intVal" xmlns:partns="http://www.w3.org/2001/XMLSchema" type="partns:int"
/>
</message>
<message name="AgentisException" >
<part name="AgentisException" xmlns:partns="http://www.w3.org/2001/XMLSchema"
type="partns:string" />
</message>
As you can see the AgentisException is defined twice (in my real WSDL it is redefined
every time a method has the AgentisException in its interface (which in my case
is 5 times))
- fault operations with no nameI believe the fault issues that you have raised have been addressed in the upcomingrelease that will be
available for beta testing shortly. Contact [email protected] if you
want to participate in the beta.
great. Is there any ETA on the final release date?
- the ability to generate client code with complex data types before
the EAR is deployed.
There is an example to show how to do this: http://dev2dev.bea.com/direct/webservice/dyncmplx.zip
Unfortunately this doesn't solve my problem. I still don't have an EAR or WSDL
file from which I can generate a client to be included in the final EAR file that
gets deployed to the server. My original post explains this a bit better.
Could the product team add
- a clean way to add in schema datatypes without having to manually
hack the web-services.xml file.
Take a look at http://dev2dev.bea.com/direct/webservice/wswa.html#qz50 and others
in this area.
This was more in reference to the building of the web services in the first place
rather than registering custom datatypes at runtime. The manual procedure is
documented at http://edocs.bea.com/wls/docs70/webserv/customdata.html#1058102,
I would just like to see an automated way to do this (I've had to write my own
utility to do this for me :(
Hope this helps,
Bruce
Thanks Bruce.
Mark

File name issue in mail adapter attachement.

HI all,
i built a scenario proxy to mail in which the data will be sent as attachement to the mail id coming from proxy it self.
I added the transform bean and xi mail adapter bean correctly..
The scenario is working fine without errors...
however the issue is. i have given the file name in for module key :
Transform = Transform.ContentDisposition = attachement;filename="xyz.csv"
but while testing the attachement is coming as "untitled.txt"
i need the attachement to be named as "xyz.csv" only.
where went wrong ...please give ur inputs.
Thanx.

Hi Kiran
Then there is no need to use Transformation bean for this
In Mapping map the mail package Content_type field with
text/plain;name="xyz.csv"
and select mail package and keep attachments in receiver mail adapter
This will work
Thanks
Gaurav

IMessage contact names issue

When receiving a notifcation from iMessage, the contact name does not appear. The notification only shows the Apple ID or the phone number of the person messaging me. However, in the iMessage app itself, the contact names correctly appear in the left side bar. This issue only occurs when receing a notifcation.
In addition, when viewing messages in a group thread, contact names do not appear besides individaul messages. Thus, it is impossible to distingush who sent what message in a group thread. Still, the contact names of all those in the group message correctly appears in the left side bar.
The contacts app correctly stores the contact information for the people who are messaging me, so it is not an issue with me not having the correct contact information. I'm unsure of what casued this issue, since it appered somewhat spontaneously after correctly working for over a year.

Hi,
In the View Menu > Messages > Show as Pictures and Names
If the Buddy lists you have are not on show or are not the highlighted window AND the Messages window itself is not the highlighted/focused window then some of this Menu woill be greyed out.
In this Picture the main Messages window is the focused one and therefore the Buddy List related ones are greyed out.
8:50 pm Thursday; March 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

IMovie File Name Issues

I am creating a slideshow in iMove 9.0.2 by taking RAW photo files, converting them to JPEG's in Aperture 3, then dragging the JPEG's into an iMovie project. I deleted a photo from the iMovie slideshow project by selecting the thumbnail in the project, then hitting the Delete button. I also deleted the source photo from Aperture.
I then took the master RAW file of the deleted photo, gave it a different name, then assigned another RAW photo file the same name as the original deleted file. Imported the new photo into Aperture, and dragged it into iMovie. Instead of the new photo appearing in the project, iMovie still displays the old photo. When I perform a "Control/Reveal In Finder" command on the incorrect thumbnail in iMovie, it leads to the proper photo in the Finder. Aperture is also correct. Only iMovie is having issues. Is there any way to correct this prolem?

First a basic question: Is the external drive formatted as Mac OS Extended?
iMovie can't properly save to other formats and you may have trouble copying files via the Finder, too, if the drive is not Mac OS Extended.
iMovie HD now stores its project folder as a "package". You can see the old iMovie 1-4-style folder structure by control-clicking (or right-clicking) the project package. Maybe the offending file is hiding there. ...but you really should not change the filenames -- the project should copy without such tweaks!!

Changing Mailserver Name Issues?

I have an older server doing both email and web and I plan to split the services across a couple of boxes and limit this box to just doing email. So far it has used the same domain name like foo.bar.com for both the address of the email and webservers. I have arranged to get foomail.bar.com working and pointed at the same box and I have the SSL cert creating and working. It's my plan to notify the users of the change and push out the new certificate and eventually change foo.bar.com to point to the webserver box instead.
What's the easiest way to make this transition while my users will be using and mix of both names? Can I change the mailserver setting to foomail right away and make foo a virtual server or vice-versa? Is there a better way?
Any input appreciated,
=Tod

I have to admit that is my first inclination - although experience tells me that the frequency of emails to users seems to have little effect on their awareness of these things. Unfortunately the main reason we run our own mailserver is because some of our least technically proficient users have been on some version of our mailserver literally for years. So I was hoping to make the change via a virtual server at first to give everyone time to try it out and handhold our problem users through the process.
The other issue is that we are in an environment where the DNS is handled by other powers that be which makes timing an exact change-over a little more difficult. (But the trade-off is that they are very good and I don't have to worry about DNS.)
Switching gears a little is there any easy way to direct any emails that might go to the new server under the old name short of doing the email forwarding thing for every account? Users are supposed to use @bar.com but some still sometimes use (or have used) @foo.bar.com and when the mailserver becomes @foomail.bar.com I'm sure some mail will still go to the new @foo.bar.com which will no longer be a mailserver.
Obviously I could run mail and do a vacation message warning system but is there a way to set-up forwarding or redirecting without setting up all the user accounts from the current server?
Thanks,
=Tod

Oracle Connector User-Name Issue: "Claude La User"

Folks - I have an Oracle Collaboration Suite User who has no issue connecting
to the calendar server via the "Windows Oracle Calendar Client" Application or via the
Calendar-Server Web-Interface: He has a somewhat unique 3-part name: We'll
call him "Claude La User".
However we've tried a 1001 combinations with "connector" & it simply
cannot find any user with this or some combo of his account name:
The Oracle Calendar client application happily accepts "Claude La User", but no such luck
with "Connector: Similarly, no such luck with any variation or combinations of that name:
Ex;
ClaudeLa User, Claude LaUser, Claude User, La User, User La Claude, etc., etc.
Any thoughts?

You could try entering a caret "^" character in the space. OC often doesn't like spaces within a first or last name. The native client is more adept at dealing with it. If that doesn't work, try the account's UID.

Vendor change name issue

I have a problem, we have a vendor named vendorA. In one day, vendorA changed their name to vendorB. Then my colleague change the name on vendor master. I would like to know it is better create a new vendor code or modify the exist one? Since we still issue PO after changed the vendor name, that means all PO related to this vendor, including new name and old name. If i create a new vendor code for new name, is it possible to transfer the to new vendor code, credit old vendor code, debit new vendor code. Thanks!

Hii,
Do not change Name of the exesting vendor into new name , it is better to create a new vendor code unless it will be difficult for you to scrutiny of vendor data.
Create a new vendor code & then find out the data which needs to be booked in new vendor code.
For this , you have to pass two seprate entires by using intermidiary account
For Eg.
if old vendor having credit balance
Old Vendor a/c   Dr.
     to Intermidiary a/c
& then
Intermidairy a/c   Dr
     to New Vendor a/c
Note : In both the entried you have to use one common profit center
Regards,
Umesh

Persistence of "type ahead" error / display name issue

Apple Mail 3.6
the "from" in the list view shows name
the "from" in the preview pane shows name name
in other words if the username was: [email protected]
in the From / Subject / Date Recieved / Mailbox
Apple Mail 3.6 shows: testuser
in the Preview Pane
shows: testuser user
where in the world did this extra stuff come from ? I cant seem to purge this.
Ive already:
a. deleted the envelope file
b. rebuilt mailboxes
c. threw three tokens into the wishing well
May be germane: I dont maintain a "me" card in addressbook. Not sure if this is relevant.
- and the issue persists

enable debugging in your publishing options to identify the line in your code, where the error occurs.
i suppose its here where your code goes wrong:
var myRnd:Number = int (Math.random()*dmuiot.length);
var dmut:MovieClip = new dmuiot[myRnd];

Host server name issue

I have installed Weblogic 7.0 on Windows 2000
server name = mb_sarah1
server ip = 192.168.27.35
application name = sarah
In a Servlet, I try to get an Object (that I've put earlier) in the
Session
When I use the url http://192.168.27.35:7001/sarah, all is good
When I use the url http://mb_sarah1:7001/sarah, the Object that I get
is null
I've changed nothing expect the url for accessing the Web Application
in the Adress Field of my Web Browser
Thanks.

DNS lookup is configured as outlined in the previous reply. But, looking at your /etc/hosts file:
10.103.10.125 ; oen11g.grid.com oen11g I would remove the semicolon.
Btw, the hosts file is also somewhat different in Linux since it puts the name of the server at the same line of localhost.
The Oracle installer expects it there.. e.g.: 127.0.0.1 gird.example.com grid localhost.localdomain localhost
You can use e.g. export ORACLE_HOSTNAME=grid.example.com to work-around the issue.

Name issues in Certification SABE201 & SABE301

Similar Messages

Maybe you are looking for