Name of my theme collection is wrong

why is my name wrong as shown for my theme collections ??? ....it should be ; wayne146, but is shown as; wyne146, .... the "a" is missing from the proper spelling of my name ???? ..... why's that ?????

For the home WI-FI network. I need to unlock it so I can use the internet on the phone off the broadband network. I was in my friends house and when I connected to her WI-FI it asked for a password to allow me to run my phone off their broadband. When I selected their network it asked for as password which i entered and unlocked it. This is not happening for me on mine home broadband ??

Similar Messages

  • How do i discovery the name of the theme is installed currently in my browser?

    how do i discovery the name of the theme is installed currently in my browser?

    Perfect solution... the path provided led me to the name of the theme !
    Thanks for your quick response,
    excellent insight and clear instructions...
    '''''''Muchas, machas gracias ...'''''''

  • What is the name of the theme song from Sleeper Cell American Terror

    Believe me if anybody out there knows the answer to this one, you would be a genius. I have looked on Itunes, I have even gone to the sleeper cell message boards. No one responded. I don't know how many of you have seen the second season of Sleeper Cell but it opens with a theme song that has a pulsating belly dancing kind of song. It doesn't last long but I went to itunes and put in Sleeper Cell but as I listened to each sample, the song is not there.
    Does ANYONE out there know the name of the Theme song that is the first thing that opens the show?
    Thank you so much if anyone knows. I just want to put it on my ipod? and dance my head off.

    Hi. I do thank you very much but the theme song is not on this soundtrack.
    The song I'm referring to is played immediately as the first episode is introduced. It doesn't play for long but it's so cool, I must have it for my ipod.
    You would think there would be someplace on the internet that has it listed as THEME SONG FOR SLEEPER CELL AMERICAN TERROR. I've listened to all the tracks and haven't identified it yet.
    I'm stumped.
    Maybe you have more experience than I have. I even wrote to Paul Haslinger and asked him for the name of this theme and how I could download it.
    I'm so dumb some times. I know all about itunes and finding stuff and this is one darn song that I can't find.
    Oh dear.
    thanks anyway,
    Melody

  • Names on Keynote themes

    When you open the theme chooser in Keynote the themes there all have their names listed below them and on the sample slide. I have made a couple of custom slides, but when they show up in the chooser the name only appears below them. Is there a way to have the name of a custom theme show up on the sample slide?

    If the problem is still there, try booting into the Safe Mode.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application uninstaller. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About

  • When I try to "Get Track Names" or "Get Album Art," the wrong info or no info is retrieved

    I'm using the latest iTunes and Lion OS.
    I have many songs from long ago (not downloaded from iTunes) which have incorrect album names, etc., and I want to clean them up, but when I enter the correct info and select "Get Album Art" or "Get Track Names," either nothing is found or the incorrect information is returned, respectively.
    For example, I have a song:
    Artist: James Taylor
    Album: Greatest Hits
    Name: Mexico
    It does not have the associated Album Art, nor does it have the rest of the information like Track, Year, etc.  It just has the Track Name, Album Name and Artist Name.  I want to update this to show that it is from the original Album, "Gorilla," so I right-click and select Info, and I fill in the Album Name as "Gorilla." When I right-click and select "Get Album Art," it tells me: "Artwork for "James Taylor - Gorilla" could not be found - though it exists in iTunes. When I right-click and select "Get Track Names," the item is updatd, and now it reads:
    Artist: America
    Album: Mellow Rock Hits Of The 70s: Summer Breeze
    Name: A Horse With No Name
    When I rename everything to "James Taylor," "Mexico," and "Gorilla," and select either "Get Album Art" or "Get Track Names," I get the exact same thing: no album artwork found, and it renames it to America.
    What is happening?  What am I doing wrong?  Do I have the wrong expectations of the two right-click options?

    I don't think CDDB and iTunes Store is the same.  The CDDB gets information for CDs only (not collections of tracks made from a CD) and uses CD features such as track lengths (exact, which could be modified by a fraction of a second when you make a MP3) track count, etc. It doesn't use any information such as artist, track name. From what Mike Johnson12 was saying it seems that ITMS uses the base tag information to identify the track fully.
    I have never used iTunes Store to label a track so I can't provide information there. I have no idea what criteria it uses, but for other id3 tag application and iTunes, by "exact" we mean exact.  Letter case is important, and I have even found that sometimes font can make a difference.
    For album artwork I do a Google search, then restrict the finds to images and select the best quality I can find. This is also the biggest in terms of file size so I only attach the image to one file in a track. When playing iTunes on the computer it displays that image for all tracks in that album.

  • Part of portal theme being displayed wrong...

    Hi,
    when loading Webdynpro iViews lige "Personal Data" and "address" under ESS the Theme is not correct.
    Rule collection and themes has been doubled checked so that is fine.
    When taking a view source on one of the iViews the source code illustrates the problem as part of the CSS is wrong:
    The link to sap_tradeshow below is the wrong one. In the portal that is working, this is linking to the correct theme.
      <link rel="stylesheet" type="text/css" href="../../../resources/sap.com/tcwddispwda/global/SSR/themes/sap_tradeshow/ur/ur_ie6.css">
      <style type="text/css">
        .hidden
      </style>
    Does anyone know if there is other places where the theme can be affected??

    Hello,
    Please check the sap note 1446099.
    The application uses the default sap standard theme
    as fall back, if the webdynpro styles have a newer version number than the
    styles in the custom theme that comes with the portal.
    Please check the version of WD style sheets as mentioned in the
    above note. If the portal stylesheet version is lower than the
    webdynpro stylesheets,
    then adjust the stylessheets of the SAP portal by applying the
    suitable sca file mentioned in the same note
    Regards,
    Sowmya

  • SCCM collection Query - Wrong output

    Hi 
    We are working on Creating Dynamic SCCM collection which get populated based on following two condition
    1) Belongs to a Test OU in AD
    2) Doesn't have scom agent installed
    We have been trying to work out why following query doesn't populate collection with correct object instead populate by every object that exist in this OU. Seems like condition after AND is totally ignored. is there anything I am doing wrong here
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_SERVICE on SMS_G_System_SERVICE.ResourceID =
    SMS_R_System.ResourceId where SMS_R_System.SystemOUName = "AD.local/Servers/DEV/Test" and SMS_G_System_SERVICE.DisplayName != "Microsoft Monitoring Agent"
    Where as below query is working and condition after AND is calculated and collection get populated with right objects.
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_SERVICE on SMS_G_System_SERVICE.ResourceID =
    SMS_R_System.ResourceId where SMS_R_System.SystemOUName = "AD.MONASH.EDU/Managed/Servers/DEV/OCIO/SplunkTest" and SMS_G_System_SERVICE.DisplayName = "Microsoft Monitoring Agent"
    We tried with different combination such as "not like", "is null" etc etc. seems to us that as soon as we try have negative criteria after AND that criteria has been ignored.
    To my little knowledge of SQL query, condition after AND is not optional and has to meet, if it doesn't query should return no value.
    is this same with SCCM collection query? will appreciate if some one can shade some light here.
    Thank you in advance. 

    Thank you All for the reply
    Our End Goal is to be able to automate software/configuration deployment based on criteria we set. SCOM is first of the rank if you like and we want this to be hands off approach so when a server move into certain OU based on criteria server get populated
    into SCCM collection and SCCM pushes out software/configuration packages out to the server.
    but having said that if we have to create two collection to satisfy our two criteria than most likely we will need number of collections depending on numbers and types of criteria. This will make managing collection and their relationship more challenging
    and not sure if that is the path we want to take. This will need to be discussed through unless we find better solution.
    Thank you again

  • School photo with 25 kids and I have been able to name 17 on them - but the remaining 8 faces I am unable to name. I go through the process (done it thousand of times) and type in the name and it sticks, I close the photo and reopen I

    I have a photo with 25 faces.  I have named 17 with no problem but the remaining 8 names I am unable to make them stick.  I go through the process (have done it thousands of times) and no luck.  I have shut down the computer, I have unplugged it, I have turned iPhoto off and nothing will allow me to name these remaining photos.  I type in the name and click RETURN and the name holds, I close the photo and bring it back and the name is gone. I have done this dozen of times - still no luck.  I have a few other photos of groups and the same thing is happening with just a few of the faces.  All the faces are clear, same size and no different in clarity than the other faces.  I have tried changing the size of the "box" around the photo to name it - still no luck.
    I am on the ground floor so I can not throw the computer out the window.

    Im wondering why my post hasn't been answered yet.  I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him.  I can understand why my phone couldn't be replaced because of the small crack.  I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems)  but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update.  I dont think it is fair to have to pay that as well. In addition,  because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm.  Verizon has cut this off.  Im very dissatisfied and I have been a customer of Verizon for 13 years.  Im hoping for a response this time.

  • HT2305 Since updating my laptop from Windows Vista to Windows 7, my Ipod Shuffle, 3rd generation does not recognize last 3 playlist names; it calls them out as "playlist 3, playlist 4 -- even though in the panel the names are showing just fine. The music

    I have recently updated my laptop from Windows Vista to Windows 7. I have just added three new playlists to my Ipod Shuffle, 3rd generation. On the panel in ITunes in view on the computer, all looks fine and music plays. However, after syncing a million times, when clicking to "hear" the playlists, the voice will call out all the old playlists just fine - except for the 3 new ones I've added; it calls them out as "playlist 3, playlist 8, or "purchased". All software for the ITunes has been updated as of the moment. Why would switching from Vista to Windows 7 cause this frustrating issue? All help appreciated.

    From page 23 of your iPod's User Guide: http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
    If VoiceOver is disabled in iTunes, you hear an abbreviated menu of playlists in numbered order, but not by name (for example, “Playlist 1, Playlist 2,” and so on).
    So you'll want to make sure VoiceOver is enabled to correct this.
    B-rock

  • How to arrange contacts in my Addess Book starting with the last name, re-doing them all at once, not individually. (I have 910 names in my Address Book).

    This is a new computer. I see that my addresses have been arranged so that they read from the first name -- i.e. Jimmy Brown comes under 'J', not 'B'. I should like to put them all so that they read from the last name, first. I can do this individually but very much hope that there is a way that I can do ALL of them in ONE go? There are 910 addresses! Thank you very much, Frederica

    First step is to set the address book to show last name and then the first.
    Open the Address Book
    Select View-Show Name As-Last, First
    Then click on the column header labeled NAME to sort on that column.

  • How to get LOGO as well as Company name in apex theme 4

    Hi There,
    I am using theme 4 for apex 4.0.2.
    I have to have logo as well as company name both, but when I select Image den it shows only image in dashboard and when i select text den it shows only company name.
    How to get both logo as well as company name?
    Thanks for your help.
    Regards,
    Pushpesh Pallav.

    Pushpesh Pallav wrote:
    Hi There,
    I am using theme 4 for apex 4.0.2.
    I have to have logo as well as company name both, but when I select Image den it shows only image in dashboard and when i select text den it shows only company name.The word is spelled "then", not "den".
    How to get both logo as well as company name?Select text, then include HTML referencing the image in the text:
    <div class="logo">
      <img src="#WORKSPACE_IMAGES#logo.png" alt=""> Company Name
    </div>The image <tt>src</tt> URI used depends on the image location, which you have neglected to specify.

  • I just downloaded iOS 8 on my iPad air. This has caused the file names of all of my PDFs in iBooks to revert to their original file name when I downloaded the file, not the custom file names I gave them after downloading the files. In the list of fil

    PDF file names changed with iOS 8

    Further to above
    Progress Notable!
    But before I outline the details, I wish to apologise to APPLE for laying the blame at their doorstep for loosing or misplacing those PDFs I have on the iPad 1, when I set up my iPad Air , by restoring from the backup of iPad 1, thus copying all data from the old to the new.
    NOT REALLY THEIR FAULT AT ALL
    Because a lot of the many PDFs had the same name, ie PDF.pdf, probably my fault more than anybody else's, so I can't blame APPLE for that. Just goes to show one should be a little more precise in creating these portable documents.
    No wonder the poor program " lost its' marbles" when doing the updating and conversion/transfer.
    However, I was able to recover most of them by personal email, and extracting and RENAMING the PDFs as I located them in their new home.
    Those PDFs that we're locked an thus not email-able , I will deal with by
    Viewing
    Photoeing (if that's how you spell it).
    And re-building the PDF from the photos, in unlocked format, after transferring these files either by Bluetooth or Wi-Fi, from the old to the new iPad.
    So all is not lost, and I am thankful that my cautious approach to this matter in the first place, gave me the ability for this successful recovery.
    That's my story and I'm sticking to it.
    I hope this little story of my saga/experience may prove helpful to others yet to cross the chasm of updating.
    Regards to all, including APPLE.
    NICE STUFF YOU MAKE.

  • Newb -- Changing the name of a Theme...?

    I have a theme which I am using called "Revolution" (ver 7.0.3).
    The title "Revolution Main" revolves around a photo at the centre.
    How can I change the "Revolution Main" text to something else?
    Thanks,,

    Select the title (click once) and it will turn light blue and then double click to bring up the inspector.
    Click Here
    A word of caution directly from iDvd's Help Menu ....
    About using special characters in a DVD name
    Some keyboard characters (such as $ or &) cannot be used in the name of a DVD. (“Name” refers to the name you give the DVD disc, not the title of the iDVD project.) The only characters that can be used are the numbers from 0 to 9, the uppercase and lowercase characters A to Z, and the underscore (_) for spaces. Lowercase letters are saved as uppercase.
    If you include any other characters in the disc’s name, they are ignored. If you include spaces in a disc’s name, they are replaced with underscore characters (for example, “My Disc” becomes “MY_DISC”).

  • Network Analysis Module (NAM) port-adapter not collect data

    Hi,
    i have an issue for collect data on adapter 1, that don´t collect data but see that adapter 2 if collect data on module 4.
    monitor session 1 source vlan 102 rx
    monitor session 1 destination analysis-module 4 data-port 1
    monitor session 2 source vlan 106 rx
    monitor session 2 destination analysis-module 4 data-port 2
    I reconfigured newly monitor and continues with that issue. Always ok by data-port 2.
    - show version Cisco 6513
    Cisco IOS Software, s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXH7, RELEASE SOFTWARE (fc3)
    . show version NAM
    NAM application image version: 3.5(1b)
    - sh module
    Ports Card Type                              Model           
    8  Network Analysis Module                WS-SVC-NAM-2
    Hw    Fw           Sw           Status
       2.0   7.2(1)       3.5(1b)      Ok
    Any idea or cuestion?

    Hi,
    I see web GUI that is active 2 monitor session with Destination Module 4.
    Active SPAN Sessions
    Monitor Session
    Type
    Source - Direction
    Dest. Port
    Dest. Module
    Status     
    1
    vlan
    (106) - Rx
    4/7
    4 (local)
    active
    2
    vlan
    (102) - Rx
    4/8
    4 (local)
    active
    Select a SPAN session, then take an action
    Create
    Save
    Add Dest. Port 1
    Add Dest. Port 2
    Edit
    Delete
    But don´t see data about DATA PORT 1, but if see data about DATA PORT 2
    Data Source:
    Most Active Applications (bytes/sec)         No data available
    Most Active Hosts (output bytes/sec)Total hosts      90 (Network)   No data available
    Protocol Suites No data available
    Server Response Times (msec)          No data available
    Any ideas?

  • EWA Report collect the wrong data

    Hi all
    Our EWA Report can not collect data perfectly
    It says that
    When we checked the log files of the archive runs, we detected that your archive strategy does not follow the SAP archive recommendations.
    In the time period from 28.04.2009 to 25.05.2009 , we noticed the following problems:
    - There was neither a successful archive run nor a successful off-line backup on Friday 22.05.2009
    - There was neither a successful archive run nor a successful off-line backup on Thursday 21.05.2009
    - There was neither a successful archive run nor a successful off-line backup on Wednesday 20.05.2009
    - There was neither a successful archive run nor a successful off-line backup on Tuesday 19.05.2009
    - There was neither a successful archive run nor a successful off-line backup on Monday 18.05.2009
    There are 5 working days without successful archive run this week.
    In fact, the backup run smoothly, for that period. I think the system read the wrong period. On 5 May - 6 May 2009, backup error but from 7 May until now, backup run smoothly
    FYI : On 8 Mei 2009 we restart our production system
    The saposcol and sapccmsr run already
    but when I hit OS07N, there is no data on casapdb system, error "Partner casapdb_CAP_32 not reached (reading table)
    Can anybody help to to solve my problem?
    thanks
    regards,
    Della

    well for backups as you say.....
    SAP looks for offline backups every day and since you are not doing offline backups,so it says an error during EWA report,so you must not be too much concerned on backup error in EWA report,
    what wrong data is EWA collecting apart from this
    Rohit

Maybe you are looking for