Name of Smartform used in FI??

Please, can anybody tell me a name of an smartform used in a some standard FI program???
And tell me the name of the program too please.
Thank you!

Even you can implement SMARTFORM ,if you can configure form name in SPRO Transaction.
Most of the FI Forms will be save under T001F Table
or
You can configure if you use below transaction :
Customer statement : OB96 Transaction
Cheque printing : FBZP Transaction
Dunning form : Smartforms. Dunning
Please ask Functional guy about configuration if you do not know how to configure or Post the question in FI forum
Thanks
Seshu

Similar Messages

Table used for displaying print/program name of smartforms

Hi All,
I need the table name which is used to display the print/program name for smartforms.
Thanks & Regards,
Santosh

check TNAPR , or tcode NACE .
regards
prabhu

How to attach logos in smartforms using standard text??

logos in smartforms using standard text

Hi,
After going into SO10>Menu Bar->Include->Graphics-->Select the logo you have to include that in the standard text. ->save->Activate.
IN the smartform.
Create a Logo Node and fill the information in the right side under general attributes.
Name---Standard text name.
Object
Id.
You can upload the logo using SE78.
Thanks,
Sree.

Hi..how we enter standard text for smartform using include text

hi
guru
..how we enter standard text for smartform using include text..
i know only using so10 we write text..
in smartform it asking text-object
text-id,
so what values we should give to get text

Hi,
Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
Regards,
Shafivullah Mohammad

Trying to delete file from trash but get this: The operation can't be completed because the item "File name" is in use. All other files delete except this one. Please help

Trying to delete file from trash but get this: The operation can’t be completed because the item “File name” is in use. All other files delete except this one. Please help

Maybe some help here:
http://osxdaily.com/2012/07/19/force-empty-trash-in-mac-os-x-when-file-is-locked -or-in-use//

How to send multiple files with it's original name over HTTPS using one CC?

I am working on a File to HTTPs scenario. It is in production and working fine. Currently we send only one file and I have hard coded the name in the communication channel in the header fields. Now we have to send more files with different names and I want to use only one receiver channel instead of many. We need to send the files with their original names.
I used the ASMA in the sender File Adapter and I see the FileName in the dynamic configuration under http://sap.com/xi/XI/System/File name="FileName".
I know we can use a UDF in message mapping and get the value and put it in HEADERFIELDONE. But we don't want to use mapping as the files are huge and we don't want to insert XML tags in the payload.
So how do I put the Filename from the DynamicConfiguration to the HTTP header field as FileName without using mapping? Are there any settings?
Can I put something in the PROLOG or can I use any other module in the File Sender Adapter or is there any other option?
Any help is appreciated.
Thanks
Sai

See my blog:
/people/stefan.grube/blog/2009/06/19/unknown-use-case-of-dynamicconfigurationbean-store-file-name-to-jms-header-without-mapping
You have to put the configuration in sender channel, as HTTP adapter does not allow modules.
For the second module, put values related to HTTP adapter.

My 3GS will not accept my correct password and user name to start using the Cloud. It just spins while "verifying."

My 3GS will not accept my correct password and user name to start using the Cloud. It just spins while "verifying." How can I make it stop so I can activate iCloud ?

try using @me.com instead of your service address, i mean hotmail or yahoo or else, thanks.

Display data in smartforms using report

hi,
i want to display data from smartform using report.
i have a preview buttons in report when i select preview buttons displays in smarts
regards
amit

design the smartform as per ur need and get the function module generated by smartform and pass it to ur report programas below..
case sy-ucomm.
when 'smartform'.
pass the f.m that is generated by system in smartforms
       CALL FUNCTION '/1BCDWB/SF00000265'
    EXPORTING
    ARCHIVE_INDEX              =
    ARCHIVE_INDEX_TAB          =
    ARCHIVE_PARAMETERS         =
    CONTROL_PARAMETERS         =
    MAIL_APPL_OBJ              =
    MAIL_RECIPIENT             =
    MAIL_SENDER                =
    OUTPUT_OPTIONS             =
    USER_SETTINGS              = 'X'
      DATE_L                     = s_fkdat-low
      DATE_H                     = s_fkdat-high
      PLANT_L                    = s_werks-low
      PLANT_H                    = s_werks-high
IMPORTING
    DOCUMENT_OUTPUT_INFO       =
    JOB_OUTPUT_INFO            =
    JOB_OUTPUT_OPTIONS         =
    TABLES
      IFINAL                     = ifinal1[]
EXCEPTIONS
    FORMATTING_ERROR           = 1
    INTERNAL_ERROR             = 2
    SEND_ERROR                 = 3
    USER_CANCELED              = 4
    OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endcase.

Iomega UltraMax 4Q PLUS the following message appears: The operation can not be completed because the item "FILE NAME" is in use. "

Help, I need to solve. No speculation please bomas or attempts to restart, confirm that the HD is formatted for MAC and etc. .....
Whenever I try to copy my files from my HDD Western Digital 2T for my new Iomega UltraMax 4Q PLUS the following message appears: The operation can not be completed because the item "FILE NAME" is in use. "
I can not stand it anymore ...
I need to work and not temnho more space on my machine.
Scenario - iMac11, 10.6.8 + WD + 2 + 2T 4T Iomega UltraMax Plus, formatted for both Mac and connected via Firewire 800
Trying to copy the message aborts the copy - "The operation can not be completed because the item" FILE NAME "is in use."

Hello,
As I said earlier, properly formatted for Mac.
Mac OS Extended (Journaled)
This HD is formatted for MAC factory, but I even did a few times in my attempts I can say that this is entirely correct formattingwith it - Mac OS Extended (Journaled)

Problems copying iTunes folder to an external hard drive - "The operation can't be completed because the item FILE NAME is in use"

Hi,
I have been trying to back up my iTunes folder from my MacBook hard drive over to a new LaCie external hard drive. However, whenever I try to do it at some point during the copying I keep getting the warning "The operation can’t be completed because the item FILE NAME is in use". Each time I have tried it, it is always a different file name that comes up and at different points of the copying. Following the warning, the copying stops and cannot be restarted.
I tried copying the iTunes folder to another Lacie external hard drive that I have, and it worked fine so I am guessing that it maybe something wrong with the hard drive.
I've been trying various approaches all day and can't seem to get anywhere with it - all very frustrating, so any help would be much appreciated!
Thanks.

If you don't have other backup data on it, reformatting external drive could solve the problem.

The operation can't be completed because the item "folder name" is in use

Hi everyone,
I think this is quite a common issue but I don't find it really easy to find a solution.
I have a folder containing a folder and no files on a server that I cannot delete, for the life of me.
Whether I use shortcuts or drag the main folder to the bin, I have the same result "The operation can't be completed because the item "secondary folder name" is in use". This folder is just 1 year old so, obviously, I have restarted the computer more than once since then which means that the folder is NOT in use.
I'd like to clean up a bit and remove some stuff and this is bugging!
Hope someone can help me.
Thanks in advance!

If you don't have other backup data on it, reformatting external drive could solve the problem.

How can i send an e-mail to several mail adress typing a group name, similar procedure used un gmail

IN IPAD AIR How can i send an e-mail to several mail adress typing a group name, similar procedure used un gmail wich is very frendly

Before all these updates, one used to be able to create a Group (such as Buddy List), then send emails by clicking on that Group Name. Has not worked for a long time now, though. I wish they would bring it back.

System Log Event ID 4321 every 30 seconds, system name conflict for a name not in use

-- Symptom --
System event log shows an error with event ID 4321 every 30 seconds:
The name "pac-1 :2d" could not be registered on the interface with IP address 172.20.51.206. The computer with the IP address 172.20.21.2 did not allow the name to be claimed by this computer.
-- Environment --
OS: Windows 7 x64 Enterprise
Network: Enterprise domain
DHCP: Yes
WINS: via DHCP
-- Additional information --
This computer was set up from an image. The image was built with the system being named 'pac-1'. This system's name was changed to 'pac-11' before (or possibly shortly after) joining the domain and now has a completely different name, and there
is no system on the network with the name 'pac-1' (there are 'pac-3', and other numbers, but no 'pac-1')
I have renamed the system with no change to the frequency of the error, and I cannot find 'pac-1' in the registry anywhere except for strings located in HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\LANDesk\Inventory\LogonHistory\Logons that list prior logons.
I've done my google research and have found great information for plenty of other people's situations, just not this one. Any helpful advice is welcome.
Thank you!

c0lorless wrote:
-- Symptom --
System event log shows an error with event ID 4321 every 30 seconds:
The name "pac-1 :2d" could not be registered on the
interface with IP address 172.20.51.206. The computer with the IP
address 172.20.21.2 did not allow the name to be claimed by this
computer.
-- Environment -- OS: Windows 7 x64 Enterprise
Network: Enterprise domain
DHCP: Yes
WINS: via DHCP
-- Additional information -- This computer was set up from an image. The image was built with the
system being named 'pac-1'. This system's name was changed to
'pac-11' before (or possibly shortly after) joining the domain and
now has a completely different name, and there is no system on the
network with the name 'pac-1' (there are 'pac-3', and other numbers,
but no 'pac-1')
I have renamed the system with no change to the frequency of the
error, and I cannot find 'pac-1' in the registry anywhere except for
strings located in
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\LANDesk\Inventory\LogonHistory
\Logons that list prior logons.
I've done my google research and have found great information for
plenty of other people's situations, just not this one. Any helpful
advice is welcome.
Thank you!
I'd check my WINS server's registration entries, if they contain an
entry with that NETBIOS name. If the machine with the ip-address
172.20.21.2 is not your WINS server you need to check, what services
etc. are running on that machine. Also look if the domain/workgroup
name, which is used by this machine is correct and identical to all
other machines.
Wolfgang

How to find Mobile device OS name and version using Flex?

is there anyway to get device information like OS name and version using flex 4.5.1 or 4.6 SDK. i am developing a project in Flex which needs to identify the end user mobile platform like Android, iOS.. and its version like Android means 2.1,2.2,etc..
Anyone can help me on this?

I don't know that there is a proprietary driver. In fact, I'm sure there isn't because I never installed one. I figured there was some code file somewhere that dealt with keyboards. Yes, I have dealt with the developer, they say to tell Apple there is a problem. I have been putting it off and waiting to update since 10.6.3, so the problem is getting a little old. Do I even know there is a problem? I'm not sure what this means. I do know that when I update my operating system past 10.6.2 my keyboard no longer works, and I have to use a stock Apple keyboard to run a time machine reinstall. Why else would I be going through this?

Sun would like your help with the "System Name Already In Use" error

A couple of users have reported getting an erroneous "System Name Already in Use" error when re-registering a system after a fresh Solaris re-install. We'd like your help in tracking down this problem.
The scenario is this:
* Install Solaris 10 and register with updatemanager,
* Wipe out the installation and re-install Solaris.
* re-register with updatemanager.
The system erroneously reports that the system name is already in use. It is supposed to detect a duplicate registration of the same system.
We have not been able to reproduce this error in our lab.
If this has happened to you, would you let us know at [email protected]?
Here are the things that we would like to ask of you:
* If you run "updatemanager -debug" if will create a log file /tmp/basicreg<timestamp>.log.
* Details on the exact hardware you have (make/model/configuration).
* Details on the steps you took to get to the bad state. REALLY detailed!
Thanks!
Based on what we know now, we believe you can work around the issue by either:
* Changing the host name and re-registering.
* Creating a different user account and registering the host to that account.
Some previously-posted workarounds are known NOT to work:
* Wait 24 hours and try again.
* Do some "ccr" incantations and try again.

Hi,
Can you drop me an email as i am a sun employee and i will be able to check if the swup frontline team have received any support cases on this issue and then we can work with you directly to resolve the issue.
Scott Wallace

Name of Smartform used in FI??

Similar Messages

Maybe you are looking for