Name of the F4 help structures for field SPRAS

Hi experts,
As 'hrpad00fatxt' is the f4 help structure for 'Famst'..... could you give the names of the f4 help structures for the field  'Spras' ??
plz help

H_T002 is the name of search help//
if u know the table in which it(the field) is used...u can ur self find it...just like I checked in T001 table..
There i cliked on the field type spras. there at the bottom right ...u can find the search help...in the search help tab..
Edited by: Rudra Prasanna Mohapatra on Jul 21, 2008 10:29 AM

Similar Messages

  • How do you change a device's name in the sound setting? For example, Let's say I want to change " logo headset" to "log microphone." Please help it's urgent!

    How do you change a device's name in the sound setting? For example, Let's say I want to change " logo headset" to "log microphone." I need to do this in order for Rosetta Stone to recognize my USB Logitech headset. I'm extremely confused. Please, just help.

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
    You can also post in your installed os section of the message board.

  • Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)

    Hi
    In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
    But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
    Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
    There is only one Job Server and the destinations are enabled in it
    There is no Job server for Crystal Reports Job Server
    Do i need to create it and how.

    Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.

  • Is the apple help number for free?

    Is the apple help-number for free?

    Only for 90 days after purchase unless you purchased the extended AppleCare warranty. If you did then it is two years.

  • What are the central organizational structures for the following SAP applic

    What are the central organizational structures for the following SAP applications ?                                   
    a)     FI                              
    b)     SD                              
    c)     MM                              
    d)     CO                              
    thanks
    manoj

    hi,
    Inventry and Finance
    regards,
    varma

  • Help Text for Field Name.....

    Hi Experts,
    In ALV Report there is Feild names like Order No., Qty, etc.
    When the user moves the cursor to the Feild Name i.e. Qty, it should show help text "This Qty is for A-B...".
    How to bring help text for Feild name when the cursor move to feild name ?
    Pl. guide.
    Yusuf

    Hi Shiva,
    There is no field TOLLTIP in SLIS_FIELDCAT_ALV.
    My sintex is :
      w_fcat-col_pos     = 9.
      w_fcat-fieldname = 'FACTOR'.
      w_fcat-seltext_l = 'Stock Value (55 %)'.
      w_fcat-outputlen = 18.
      w_fcat-do_sum = 'X'.
      APPEND w_fcat.
      CLEAR w_fcat.
    Is there any other way becaz there is no field like tooltip?
    Yusuf

  • Search help exit for field name: BANKL (bank number)

    Is there any search exit that can be used on field BANKL to display only some bank based on user defined criteria?
    Regards

    we can create the search help ..
    we dont need to use CMOD or SMOD for this .
    The search help exit are implemented as function module (newly created) . 
    The place for exit in search help is blank but we can assing our exit ( FM created ) into that . Take the F1 help of that in change mode of search help .
    A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
    This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
    A search help exit is called at certain timepoints in the input help process.
    Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
    Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
    well  which search help you want to change. and what changes are needed .?

  • Get  material list for particular equiment no  in the f4 help of component field in the component field.

    hi frnds,
               In the tcode ib02 , we get the bom component list for particular equnr no. now in iw32 we need bom component list in the f4 help o,f component field of the components tab for particular equnr no ,added in the header tab.please help.
    regard rajit.

    Rajit,
    This facility is there in Standard.
    In the components tab click on the List  icon at the bottom menu (see picture below) . You'll be presented the BOM list, Here you double click on the material to be taken into Order. You'll be back to Components page with the material copied into Components list.
    Jogeswara Rao K

  • How to Change the default Search value for Field Role?

    HI,
    I went through numerous threads on how to default the search value , but does not help for my issue. Hence im posting this new thread. Please provide your suggestions on how to achieve this.
    For the Ship-to party field (in item detail )  on webui when i do a F4 help i get the pop up with various search criteria and  for the field Role the default value is "Ship-to party".  which is visible. we need to change this default value to Prospect which is available in drop down.
    The attribute is STRUCT.ROLE  and view BP_HEAD_SEARCH/SearchHelp . The method GET_DQUERY_VALUEHELPS  from the context node class is called to fill the value help for this attribute, but i dont understand how the ship-to party is filled as default. There is no code in this method to default the value.
    The generic GET_V_S_STRUCT method also does not default the Ship-to party on this field.
    I want to understand how this Ship-to party is filled by default and how can i change this to prospect..
    Many Thanks,
    Shaik

    We had a same requirement of defaulting Sales org and division in search criteria for a specific value.
    this can be doen by redefining "DO_PREPARE_OUTPUT" method in IMPL class for the respective view.
    See the code:
    METHOD do_prepare_output.
    *CALL METHOD SUPER->DO_PREPARE_OUTPUT
    **  EXPORTING
    **    iv_first_time = ABAP_FALSE
      DATA:
        lr_qs TYPE REF TO cl_crm_bol_dquery_service.
    * Get current query object
      lr_qs ?= me->typed_context->search->collection_wrapper->get_current( ).
      IF iv_first_time = abap_true.
        lr_qs->clear_selection_param_values( ).
        lr_qs->delete_empty_selection_params( ).
    *   if l_sales_orgs is initial.
        CALL METHOD lr_qs->insert_selection_param
          EXPORTING
            iv_index     = '1'
            iv_attr_name = 'SALES_ORG'
            iv_sign      = ' '
            iv_option    = 'EQ'
            iv_low       = 'O 50000514'.
    *   endif.
    *   if l_dist_chan is initial.
        CALL METHOD lr_qs->insert_selection_param
          EXPORTING
            iv_index     = '2'
            iv_attr_name = 'DISTR_CHAN'
            iv_sign      = ' '
            iv_option    = 'EQ'
            iv_low       = '01'.
    * endif.
    Hope this will help..
    THanks & Regards,
    Amit

  • How to show the "SIA name" in the CMC screen(s) for administration ( BI 4.1 SP5)

    When logging on to "BI4" (cmc) we have several options.
    First option: the web page for the login.
    Our system has 3 SIA's ( DEV , TEST , PROD ), three Tomcat "web app servers" with respective urls
    DEV is a simple one: everything on one machine.
    (exceptions: databases in Oracle, IFRS / OFRS are NAS mapped to D:/something on the BI4-DEV server)
    TEST is separated:
    tomcat on an application server (url:bi4-web-test) ,
    one "management server" BI4-MAN-TEST for SIA,
    a "processing server" BI4-PRO-TEST for the processing services.
    PROD is much like test, only more processing servers on extra machines
    BUT
    logging on to CMC, at either one of these 3 URLs : http:/<siaservername>/BOE/CMC/ ,
    I still have the option: "Server:" ( BI4-DEV , BI4MAN-TEST, BI4MAN-PROD : three different "manager" or SIA names)
    So starting from BI4-DEV, I can log on to BI4-PROD
    My problem: the URL shown in the browser navbar now does NOT tell me any more at which server I am working. The url only shows where I logged in.
    Is it possible to SHOW the ACTUAL SERVER somewhere - say next to the logged-in user name ?
    Instead having a page header showing:
    ... <preferences> ... Welcome, Administrator
    I imagine it showing:
    ... <preferences> ... Welcome, Administrator ON <SIA>
    Is this at all possible ?
    In Boxi 3.1 we could modify the "header layout" for InfoView. Users would see our company logo, their login name ... but we never did that for boxi 3.1 "CMC"
    Now in BI4.1 , with the much more complicated setup, we want to do that.
    I did not find it in the "Administrators' Guide" .... yet.
    Hans Rens,
    Brussels

    ( long reply)
    Thank you for this First step.
    Though reading through your reply, I understand that my question was not clear.
    On the (Launchpad) LOGIN page, I see the company name. That page thus was “customized”
    On the CMC login page, we didn’t customize it. We judged that “Administrators know what they are doing”
    and that “ICT personnel can live with reading the SAP logo instead of company logo/name/colours”
    BUT
    Once logged in to the CMC, every “internal page” (the menu, the Universes page, the Applications page, the Users and Groups – page … ) have a uniform header saying :
    Welcome: HANREN | Preferences | | Log Off
    (yes, HANREN is the name of the BI User logged on)
    I would like to make it something like :
    Welcome: HANREN | BI4MAN-PROD | Preferences | | Log Off
    Where the red name is “the name of the SIA, a.k.a. “manager server” for the (prod) cluster. (or test cluster – and when nothing is showing, we will know “this is DEV” because we “did not customize that one” )
    WHY ?
    At login, everybody KNOWS where he is logging in to, because you need to supply the SERVER NAME
    But further on, working in two (or more) browser windows / tabs, one needs a way to find “where I am”.
    This goes fine, when logging in to DEV on the DEV URL, then opening a second window and logging in to the TEST URL and on the test sia.
    But SWITCHING from one window to another tab … a small indicator would be very helpful.
    Lucky escape ?
    We did have a problem recently, were two admins were loggin on / off to the different systems, looking for differences to correct something … but nobody wanted to “correct” a system that was working well.
    It was quite frustrating to find out that it was “very easy” to think I was working on system1 (in the url) while actually connected to the system3(sia)
    OK, we saw that in time, before the problem from system3 had been “implemented” on system1, instead of applying the solution (settings of working system1) to the faulty system3.
    But the stress of the error found, the search for solutions “asap” … has to be counted in. If there is a simple way to “know” where one is working, instead of having to “guess” , human mistakes can be brought to a minimum.
    This morning I tested again: it is perfectly possible, to open 3 browser windows on exactlu the same URL, then open 3 DIFFERENT CMS logins : one on prod, another on test, a third one with my colleagues login also on test … and the navigation bar will NOT show who is adding user groups in which system.
    Thank you for the first step hint, though. I’ll add it to our documentation.
    It is a little different in BI 4.x than in our boxi-3.x setup )

  • What is the new data structure for .RTM files in LV8?

    We have software that translates our LV
    program to another language.  Part of that software package reads RTM
    files, decodes them, replaces text, and resaves them.  That code is
    broken for menus that are saved in LV8+, however.  What is the new data
    structure?
    The simple attached zip file has vi's which
    are not ours but serve to illustrate the point.  If it's run on an
    older RTM file, it correctly outputs and XML version of it, on newer
    RTM files it just throws an error.
    -- This is the second time I posted this.  I was curious what the Solution? icon did on somebody elses post and I apparently marked the whole thread as solved (there should really be an undo on that feature btw --
    Attachments:
    RunTime_Menu_to_XML.zip ‏33 KB

    Hi Thomas,
     What error are you getting when running the program?  I was actually able to run it without errors in LV 8.6.  
    There are ways to programmatically read and customize RTM files in LabVIEW.  I hope that the following links will help:
    http://zone.ni.com/reference/en-XX/help/371361B-01/lvhowto/customizing_shortcut_menus_programm/
    http://digital.ni.com/public.nsf/allkb/17803AA31C8C07C986256CFD0080D609?OpenDocument
    Cheers, 
    Marti C
    Applications Engineer
    National Instruments
    NI Medical

  • Name of the standard FM called for displaying address in Smartform.

    Hi all..
    Wat is the name pf the standard FM that is called wen we use address in smartform,inputting the address number...
    Regards
    Rudra

    Hi,
    if we Inclue Address in Address Node, System reads address data directly from the data base tables.
    Inserting addresses:
    One can use the address node to insert an address into the form. This guarantees that the address is formatted according to the postal rules of the sender country.
    1) To create an address node , call the context menu for that node in the tree structure that one wants to contain the text and choose create->text
    2) Enter a name for the node and a description
    3) Determine the address type on the general attributes tab
    4) For organizational addresses one has to specify the address number, for any other one has to specify the person number and the address number
    5) In the box additional addresses one can maintain other attributes to specify how to display the address
    Addresses are printed using the ADDRESS_INTO_PRINTFORM function module.
    To enable the ADDRESS_INTO_PRINTFORM function module to call existing versions of an address for print output, the application program has to transfer the address number for address type 1, or the address number and person number for address types 2 and 3, to the function module or to SAPscript/SAP Smart Forms.
    If SAPscript/SAP Smart Forms are used for printing, the address number (or address number and person number) is to be specified here as a parameter. The ADDRESS_INTO_PRINTFORM function module then controls internally which version of an address is printed:
    In the standard system, printing of address versions is only supported for Japan. Besides the default version, the versions Kanji (K) or International (I) can also be printed.
    follow these links for brief information.
    http://www.sap-press.com/downloads/h955_preview.pdf
    Regards,
    Omkar.

  • How to get the limited help manual for CS4

    CS4
    When I click the help button on Encore CS4 I get something besides the normal help.
    It only seems to be Encore where that happens.
    Premiere
    AfterEffects both go to the online help manual but not Encore.
    When clicking help I get this sorry guff:
    http://www.adobe.com/support/encore/?trackingid=DYNPX
    And I see no way to get to the regular manual from there.
    (Encore seems the only one of CS4 Production Premium that gets this type of help page)
    I want this kind of manual page (This is for Premiere CS4):
    http://help.adobe.com/en_US/PremierePro/4.0/index.html?trackingid=DYNQG
    Like the one available for Encore CS5:
    http://help.adobe.com/en_US/encore/cs/using/index.html:

    Yes, this is inconvenient.
    To confirm and add just a bit, when you click "help" in CS4 Encore, your browser first goes here:
    http://help.adobe.com/en_US/EncoreDVD/4.0/search.html?AH_ION=true
    which is redirected to this next page (which is a very general Encore help page with a primary link only to CS5 encore help):
    http://www.adobe.com/support/encore/?trackingid=DYNPX
    You want to go here:
    http://help.adobe.com/en_US/EncoreDVD/4.0/
    Option 1: put a shortcut on your desktop for the last link.
    Option 2: From the page you go to, click on CS5 help, then when you get there, use the little link at the bottom right to switch to CS4.
    I'm not sure who handles these issues.  I wonder if Todd Kopriva will visit and tell us if I use his name in this post?  It seems to me that once he had a method for redirecting something, but I didn't find anything in a quick search.

  • Display vendor name in the additional costs details for the PO

    Hi,
    I was wandering if there is any possibility to display vendor's name in the additional costs detail in the conditions tab in PO.
    As for standard, only the vendor number is shown.
    Regards.

    Hi,
    It is not possible to view the name of vendor there in "Addiitonal Data" screen for the condition type.

  • About downloading and installing the Adobe Help Manager for CS6

    Because the Adobe help manager essentially ceased functioning as part of my Adobe CS6 installation I had to uninstall it. Now I am having great difficulty to locate the Adobe Help Manager on any of the Adobe download sites. Although I have the Adobe media disks for CS6, I don't want to reinstall the entire suit just to get back the Help manager

    There is no other way. AHM only comes with teh suite install.
    Mylenium

Maybe you are looking for