Name of the first iPhone

I've gotten two answers and I'm really tired of searching for the true answer so, I came here and I would hope to think the one I get here is right: now, what is the official name of the first iPhone that came out of apple in 2007? Was it just the iPhone? was is called the iPhone 2G? I've never heard it called the iPhone 2G until like a week ago and I've gotten half and half answers from a biased and non-biased question. Never mind that though, just answer the question. PLeAsE

iPhone.
After the iPhone 3G was released being a 3G network compatible iPhone, some called the original iPhone the iPhone 2G since it is not a 3G network compatible phone, but Apple never did. Technically it should be called the iPhone 2.5G in this regard for those concerned since the EDGE network is a 2.5G network.

Similar Messages

  • Just updated my iphone. Now I can se I have two? iCloud accounts? One of them appears on my phone, and I have forgotten the password. When I try to add the other account, I get the message that this account is already added, but with the name of the first

    Just updated my iphone. Now I can se I have two! iCloud accounts? One of them appears on my phone, and I have forgotten the password. When I try to add the other account, I get the message that this account is already added, but with the name of the first account where there is no available password. I have tried several times to reset the password, bun I don't get the information I need - I have no access to email. What can I do?

    Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
    Anything else I could try, or am I doomed!
    All of your help is much appreciated, thanks

  • HT201371 More Apple id's with the same Touch ID possible? I have two Apple ID's, one for buying apps since the first iPhone and later, one for iCloud. Now with my new iPhone 5s, after installation Touch ID is connected to the iCloud one.

    I have 2 Apple ID"s, one for buying app's (since the first iPhone) in the store and another one for operating with iCloud things. Now, after installation/activation of my new iPhone 5s, the Touch ID is connected to the iCloud world. Conclusion, if I like to buy a new app. I still have to fill in the password for the other Apple ID. In the past I asked Apple to may join both, but that seems to be impossible.
    Anyone a solution?

    I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.

  • I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5.  I changed the name of the first library to iPhoto library 1 and now I all my photos are gone.  My operating system is Mavericks.

    I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5.  I changed the name of the first library to iPhoto library 1 and now I all my photos are gone.  My operating system is Mavericks.

    launch iPhoto wile holding down the option key and select the original library - when you create a new library of course it is empty
    And you seriously need to backup your iPhoto library and purchase and install iPhoto '11 version 9.5.x from the App store and download and run the iPhoto library upgraded \then run the new iPhoto - 7.1.5 is not fully compatible with Mavericks
    LN
    PS you also need to update your profile - it states that you have OS X 10.6.8

  • TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

    iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
    as i said i have two iphone 4S,,,,,
    1st one --- has os 5.1
    2nd one has os 6.0
    i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
    but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
    plz reply asap...!!!
    thnxxx in advance!!!

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

    Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

    What are the Variables settings, what is the text file’s content, …?

  • I have a MacBook Pro, how to change the computer name in the "Find Iphone"

    I have a MacBook Pro, how to change the computer name in the "Find Iphone"?

    Thank you for help! I was inattentive reading your answer. The thing which confused me was that I noted in blue. I had to just write in a red box and close the configuration window.

  • Appending multiple *.csv files while retaining the original file name in the first column

    Hi guys it's been awhile.
    I'm trying to append multiple *.csv files while retaining the original file name in the first column, the actual data set is about 40 files.
    file a.csv contains:
    1, line one in a.csv
    2, line two in a.csv
    file b.csv contains:
    1, line one in b.csv
    2, line two in b.csv
    output.csv result is this:
    I would like this:
    a.csv, 1, line one in a.csv
    a.csv, 2, line two in a.csv
    b.csv, 1, line one in b.csv
    b.csv, 2, line two in b.csv
    Any suggestions to speed up my hobbling attempts would be aprieciated
    Thanks,
    -SS
    Solved!
    Go to Solution.

    What you could do is given in the attachment.
    Started with 2 files :
    a.csv
    copy of a.csv
    Both with data :
    1;1.123
    2;2.234
    3;3.345
    Output :
    a.csv;1;1.123
    a.csv;2;2.234
    a.csv;3;3.345
    Copy of a.csv;1;1.123
    Copy of a.csv;2;2.234
    Copy of a.csv;3;3.345
    If you have more questions, just shoot
    Kind regards,
    - Bjorn -
    Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
    LabVIEW 5.1 - LabVIEW 2012
    Attachments:
    AppendingCSV.JPG ‏73 KB

  • Table where the last name and the first anme are stored

    Hi ALL,
    I would like to know the table in which the last name and the first name of the employee gets stored?

    Hi,
    You can use the table PA0002 for first and last name of the employee.
    Please refer the below fields in table PA0002
    First name- PA0002<VORNA>
    Last Name-PA0002<NACHN>
    Second Name-PA0002<NACH2>
    Regards
    Raviiiiiiiiiii

  • Can only print under the name of the first person to sign on to Windows.

    HP 7310 All-In One will only print under the name of the first person to sign on to Windows XP.  If my daughter signed on first and I want to print, I have to log off, go to her name and then I can print.

    If this did not work then the account used to install was probably one that is a User with Admin rights and not the System Administrator account. Below is a link that gives you information on accessing the Admin account.
    http://windowsxp.mvps.org/admins.htm
    Your other option is to simply install the printer software under each users login.
    Dave M.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution.
    I am an HP employee.

  • When sending an email to multiply recipiants, using address autocompletion, all the address boxes convert to the name in the first box

    I use Thunderbird for my email. When sending an email to multiple recipients, I use autocompletion from my local address book. When I select an additional recipient, the name initially appears correctly in the address box. Each time I drop down to add another recipient, the names in each box all revert to the name in the first box. I've used Thunderbird for 2 years and this just started today. Also, the cursor and names in the address box appear now in red instead of black. Hopefully you can solve this problem.
    Thank you,
    bradoc

    There are some evil bugs in the current version of Thunderbird. You may find it works better if you click with the mouse, or move down with the arrow keys and click or use tab. IIRC, there's an issue with use of the Enter key. Or maybe the other way round ; please experiment. It's one of those frustrating bugs that seems to affect everyone but me.
    You can download older versions here:
    https://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/
    I believe 31.2.0 is free of this particular issue. 24.6 seems to be a popular choice for those who dislike recent changes in the Composition window UI.

  • Apple mail incorrectly promotes my name to the first position in the To: field

    I'm not sure how long this has been happening, but I recently noticed that my email address is always promoted to the first position of the "To:" field on messages that I receive. This is NOT a welcome feature. Why? Because the order of recipients that the sender addressed the message to is relevant context to understanding, and properly handling the message. Promoting my name to the first position in the To: field eliminates this context, making it seem as if I am the primary person that the sender expects a response from (one possible reason for addressing it to me first).
    Apple, you need to respect the content formatting choices of email messages. Maybe your interaction designers thought this would make me feel more special? More important? Not sure, but what it actually does, is it makes me have to look at the raw message source in order to find out whether or not I'm at the top of the list. This is a mis-step in the way you present email messages. I hope you will reconsider the design and go back to showing my name in the order entered by the sender.

    I have this problem too with my Macbook Air. Mail opens automatically every time my laptop sleeps. I actually just asked about this in my own thread. However, it is not causing my apps to freeze.

  • What did the first iPhone look like

    My friend thinks the iPhone 3G was the first iPhone ever and I need proof that there was an iPhone before that please help with any photos or documentation from apple that shows that there was and original iPhone. Apparently all the evidence on the Internet is fake according to my friend.

    "Apparently all the evidence on the Internet is fake according to my friend."
    Your friend is wrong.

  • I've just been offered the first iphone (1st Generation) which was released some time ago, in which and what way will I be underhanded.

    I've just been offered the first iphone (1st Generation) which was released some time ago, in which and what way will I be underhanded as the price range is very handsome.

    mirameahora wrote:
    You will get no use out of this phone and wont be able to use itunes either
    I don't know why you say that. Many people are still quite happily using first-generation iPhones. They are very limited in the carrier support - EDGE only as Tim said - and the apps available are few now, but the phones still work and serve their original purpose.
    That said, I certainly wouldn't buy one. Used iPhone 3G and even 3GS units are available quite affordably and are much more flexible.
    Regards.

  • What is the name of the first cluster transport adapter?

    Hi,
    I am new to Solaris and just entering to clusters. pardon if asking any question that is already answered.
    I am installing Sun Cluster on 2 X v120 boxes and i have two interfaces eri0 and eri1 on each box.
    I gace connected eri0's to a Switch and eri1's using crossover cable.
    eri0's are configured for 10.10.7.xxx and eri1's are in 176.16.0.xxx
    this was done because I was not able to telnet on network adaptors connected using crossover cable when they were configured for 10.10.7.x.
    Now the problem is while installing sun cluster using scinstall, I am asked for Cluster Transport Adaptor name.
    The script will not work is I give eri0 or eri1, it says,
    Adapter "eri0" is already in use as a public network adapter
    Adapter "eri1" is already in use as a public network adapter.
    These are the only two adaptors I have and dont know hoe to proceed further.
    Now the question are...
    1. Do I need to configure virtual adaptors like eri1:1, eri1:2 or is there any trick that I have misssed?
    2. What is the common IP for which the cluster will respond once configured? Is it the IP of First Node or do I need to provide any other IP?
    Thanks in advance for the help.
    Regards,
    Ramesh.

    Hi,
    the problem starts with the special call so scsi reservations, not with the scsi disk.
    vmware server talks in their documents how to make a bus virtual tu support scsi reservations, no chance with the worstations.
    You may have to "disable" failfast panics by hashing out
    /usr/cluster/lib/sc/cmm_ctl -d -f in the cluster start methods.
    I am not specific here by intent, because then you are vulnerable to split brain, amnesia, ...
    This is totally unsupported and may work, but making mistakes will corrupt your data. If it works fine, treat it with extreme care.
    For the quorum problems the quorum server helps, so You then have to start an other vm on your machine to be the quorum server.
    For demonstration purpose I am personally using single node clusters and found them sufficient.
    I have heard, that the description in the vmware server guide enables scsi2 reservations only, so you are stuck to 2 node clusters, or you have to change the reservation type which is only doable in SC3.2.
    Kind Regards
    Detlef

Maybe you are looking for