Name prefix reservation invalid

Hi All,
I've created a name prefix reservation on my sld to be used in nem DC created by NWDS with success. After that I decided to change the nomenclarure so I've deleted the name prefix and created it again. Since the recreation any name prefix is created but the checkbox valid is't checked making it unusable in NWDS.
With some further tests I've detected that this only happens when I create a name prefix reservation with purpose "used in generator".
Any ideis what the cause is ?
I'm using Netweaver CE 7.1 EHP1 (SP3).
Thanks in advance.
Edited by: Luis Pereira on Feb 10, 2011 11:18 AM

Hi Luis,
could you please rephrase your question for better understanding ?
Thank you!
Regards,
Ervin

Similar Messages

In R12 how to change concurrent output/log file name prefix?

how to change concurrent output/log file name prefix?

but i want to change change concurrent output/log file name prefix?You cannot, and I believe it is not supported for all concurrent requests -- Please log a SR to confirm this with Oracle support.
Thanks,
Hussein

Want field and table name for RESERVED coloum in MMBE

Hi ,
        There is a RESERVED coloum in MMBE and     I want this   * RESERVED* coloum in MB52   .
       I got to know that Field related to this RESERVED coloum is BDMNG coming from table RESB .
       To confirm the field and table I checked the value in BDMNG by putting join on MARA and RESB where MATNR = BAUGR.
        But I got value in BDMNG is 50 and in MMBE it is .228 for that material.
           Please tell me field and table name for RESERVED coloum. and hoe to join MARA and RESB to get exact result.
Thanks and Regards,
Ranu

Hi,
Mara-matnr is not equal to Resb-matnr and it shows no record if i do like this.
But Mara-matnr is equal to Resb-baugr, and it gives me 1 record .But porblem is that i dint get BDMNG field matching with mmbe RESEVERD coloum.

Plugin Register Error - Assembly file name is in invalid format. Only file name is allowed.

Hi,
when I add a step in a plugin registered in disk using the 2013 or 2011 tool for CRM 2013. it got a error as below.
Assembly file name is in invalid format. Only file name is allowed.
Anyone know this? thank you.
Detailed log as below
Unhandled Exception: System.ServiceModel.FaultException`1[[Microsoft.Xrm.Sdk.OrganizationServiceFault, Microsoft.Xrm.Sdk, Version=6.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]: Assembly file name (LoyaltyEngine.CRM.Main.Plugin.dll) is in invalid
format. Only file name is allowed.
Detail: <OrganizationServiceFault xmlns="http://schemas.microsoft.com/xrm/2011/Contracts" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<ErrorCode>-2147204719</ErrorCode>
<ErrorDetails xmlns:a="http://schemas.datacontract.org/2004/07/System.Collections.Generic" />
<Message>Assembly file name (LoyaltyEngine.CRM.Main.Plugin.dll) is in invalid format. Only file name is allowed.</Message>
<Timestamp>2014-12-31T05:16:55.9984484Z</Timestamp>
<InnerFault>
    <ErrorCode>-2147204719</ErrorCode>
    <ErrorDetails xmlns:a="http://schemas.datacontract.org/2004/07/System.Collections.Generic" />
    <Message>Assembly file name (LoyaltyEngine.CRM.Main.Plugin.dll) is in invalid format. Only file name is allowed.</Message>
    <Timestamp>2014-12-31T05:16:55.9994483Z</Timestamp>
    <InnerFault i:nil="true" />
    <TraceText i:nil="true" />
</InnerFault>
<TraceText i:nil="true" />
</OrganizationServiceFault>
Server stack trace:
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at Microsoft.Crm.Tools.Libraries.RegistrationHelper.RegisterStep(CrmOrganization org, CrmPluginStep step)
   at Microsoft.Crm.Tools.PluginRegistration.StepRegistrationViewModel.btnRegister_Click(Object sender, EventArgs e)
Dynamics CRM Consulting

Hi,
Have you checked the below links.
http://mscrmdeveloper.wordpress.com/2014/09/04/problems-adding-step-to-disc-based-plugin-assembly/
http://gustafwesterlund.blogspot.com/2014/05/issues-with-new-plugin-registration-tool.html
Hope this Helps!!!
Thanks,
Prasad
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

The item couldn't be saved because the file name "Movies" is invalid.

When opening Quicktime Player OSX10.6.8 and clicking File-New Audio Recording or New Video Recording the audio or video recording window pops up.
However, when I click on record in that window I the following error message pops up:
"The item couldn’t be saved because the file name “Movies” is invalid."
Any tips how to fix this?
Thanks.

The only legit source for ios 6 is from itunes.
Open itunes, connect iphone.
Does it prompt you to update?
How did you update to 5.1.1 three days ago? There is no legit way to do this at all. You can ONLY update to the latest available which was ios 6 three days ago.

While installing CUCM 9.0.1.1000-37 on Vmware Workstation 8.0 m getting default gateway name/address is invalid or gateway is.

Hi,
while installing CUCM 9.0.1.1000-37 on Vmware Workstation 8.0 m getting default gateway name/address is invalid or gateway is not properly configured. Can any1 help me to get out of this issue.
Want to install CUCM 9.0 on Vmware Workstation 8.0..

Er... is there a chance your network is not properly configured? Can you please shed some light on the details of your network?
By the way, I doubt that CUCM would ever be able to start up in VMWare Workstation.
G.

"Planning object structure name 9ADCBAS is invalid"

Hello
New SCM 5.0 system
I'm trying to enter any Planning Object Structure and get the same issue as above.
I have had a look at this link Planning object structure name 9ADPBAS is invalid but the suggestion of activating all BW content doesn't seem to have resolved the issue. I have activated all InfoObjects in the Admin Workbench.
Any help would be appreciated
Thanks
SC

Hi
Following several responses from our BASIS team, and OSS providing support we have resolved this issue, by completing the following;
1.     Installation of Notes
Installation of a series of notes (see below) along with all related notes and patches identified within these notes.
     1019055
     1005848
2.     Activation of BI Content
     Ensure that the batch program BI_TCO_ACTIVATION has completed successfully (otherwise run manually)
     Activation of Characteristics
Transacation RSA1
BI Content
Select Infoobjects by Infoarea
Unassigned Nodes --> Unassigned Characteristcs
Drag and Drop Unassigned chaaracteristics to Collected Objects
Click on Install and save as Local object.
     Activation of Key figures
Transacation RSA1
BI Content
Select Infoobjects by Infoarea
Unassigned Nodes --> Unassigned Characteristcs
Drag and Drop Unassigned chaaracteristics to Collected Objects
Click on Install and save as Local object.

Planning object structure name 9ADPBAS is invalid

i am trying to access the DP planning book but then it pops up with this error "Planning object structure name 9ADPBAS is invalid".
can anyone tell me as to why is this happening and is there a way to resolve it.
Thank you in advance.
suresh garg

Hi Somnath,
We are on SCM 5.0 and face a similar issue
After the installation the standard MPOS - 9ADPBAS and the Planning Area 9ADP01 are not initialized.
This is even before the custom planning areas and MPOS is transported.
Is there an installation issue here or is it normal for this to remain inactive after the installation ?
I also read a previous note by you on a similar issue ( 9ADPBAS) that said -
Can you check what is the entry against your user name in transaction Assign User to Planning Book (/SAPAPO/SDPPLBK). Make sure that against transaction /SAPAPO/SDP94 the planning book and one of the data views of the planning book are correctly mentioned. If not add the entry and save while exiting. Next time you open Interactive Demand Planning the error should not come.++
This is assuming that the planning book / data view you are trying to access is not linked to Planning Object Strcuture 9ADPBAS "
Is there a way to rectify this while setting up the system ?
Or
Should we go by setting up the user in the trasaction (/SAPAPO/SDPPLBK)
Or
Is there any other option.
Please advice.
Regards,
Liz

Site name) uses an invalid security certificate. The certificate is not trusted because no issuer chain was provided. (Error code: sec_error_unknown_issuer)

I am working with Firefox 35.0 I get the security certificate error message of site name) uses an invalid security certificate. The certificate is not trusted because no issuer chain was provided. (Error code: sec_error_unknown_issuer).
This happens on each page that I go to. I can pull the page up with no problem with Explorer. Please Help. I don't have any security software that would be stopping or scanning SSL.

Check the date and time and time zone in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
Check out why the site is untrusted and click "Technical Details" to expand this section.
If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the <b>issuer of the certificate</b>.
You can see more Details like intermediate certificates that are used in the Details pane.
If <b>"I Understand the Risks"</b> is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.

Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example,\ /).

I recently upgraded to a new Macbook Air running Lion, from my 2007 white Macbook running Snow Leopard. I had Office for Mac 2004 on the 2007, but had to upgrade to Office for Mac 2011 to be compatible with Lion on the Air. Now when I try to open my documents on the Air that were saved under Office 2004 on the old computer, I get the following message: Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example,\ /).
Any suggestions? Thank you.

Ha,ha,ha.....I figured it out. But for anyone else who's having this problem, it seems that while Office 2004 allowed dates in this format: 00/00/00, Office 2011 doesn't like it at all. I just changed the format in the document names to 00-00-00 and all is well. Documents are opening beautifully!

Install iTunes 10.4.1 install error - The Folder Path "File Name" contains an invalid character

Upgraded computer from XP Prof 32-Bit to Windows 7 Ultimate 64-Bit (Upgrade package, performed Custom Install).
Attempt to install iTunes 10.4.1 for 64-Bit. Receiving the following error/problem:
The Folder Path "File Name on my external drive" contains an invalid character
I click ok and then get this:
The Installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system could not be modified, Please run the installer again, or click Finish to exit.
Any fixes for this?

Sorry, one of us is not managing to be clear enough.
Does the message read The Folder Path "File Name on my external drive" contains an invalid character or perhaps The Folder Path "<some path name here>" contains an invalid character?
If so, then the problem might be just what it says it is with the path name in question... Either way if you list the path given in the error message in a reply to this thread it might provide a clue for anyone tying to help with the problem.
You could try downloading the installer to C:\iTunesSetup.exe in case that helps.
tt2

Deploying libraries containing VI names that are invalid as filenames

When using "Deploy TestStand System" I get the following error:
"Error Code:1052
Could not process LabVIEW VIs. Fix any broken VIs before rebuilding. LabVIEW error:
C:\TestStand Deployment\Image\target\SupportVIs\Guardian 1000 Status?.vi"
The problem is apparently the invalid character "?" when attempting to save the VI as a file, but this is the name of the VI in the instrument library for the Quadtech instrument.
Are there any solutions to this problem or will I have to manually fix all VI names in the library (and be forced to change all references to the VIs as well)?
Best regards
Poul Anker Ersly

Poul,
The easiest fix is to go to the LabVIEW options and change the SubVI Location from SupportVIs to SupportVIs.llb. This change will put all of the support VIs into an llb which will allow the ? as a valid character.
The disadvantage of using an llb is that an installer treats it as a single file. This is a problem if you want to create multiple installers containing test VIs.
-Rick Francis

Shared Services - Cluster name specified is invalid

I'm trying to give a user access to run a calc script (11.1.2) -when I go into Shared Services to launch "assign access control" I get the message "Cluster name [Essbase: MyServer name:1] specified is invalid". How do I correct this? or am I going about this the wrong way?
Thanks,
Paul

You can use grant Maxl command.
grant execute 'Sample'.'Basic'.'nu' to user 'admin';
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?maxl_grant.html
Is Essbase working fine? Which url are you using to launch Shared Services?
Regards
Celvin
http://www.orahyplabs.com

CMP table name using reserved keyword

Hello,
I am migrating an existing application from JBoss to WebLogic.
One of the issues that came up is that there are three tables
named User, Transaction, Identity which in case of SQL Server
happen to be reserved keywords. In JBoss descriptors we used
to escape those names with square brackets and it worked fine.
I can not seem to find a way to make it work in WebLogic. If
I escape them as mentioned, the appc compilation fails. If I
don't - the application fails to deploy not being able to find
those tables.
There must be a way to specify that the app server should
escape those table names. Can You help?
Klaus

Hello. Thx for response.
I have tried something like
exec 'INSERT INTO "tuser"."dam.test.db::tuser.procedures.search_result" SELECT '''||table_name||''' AS TABLE_NAME, '||column_name||' AS ID, SCORE() AS SCORE FROM '||table_name||' WHERE contains(*, '''||keyword||''', fuzzy(0.5))';
but here i have "tuser"."dam.test.db::tuser.procedures.search_result" created before the execution. What i really want is to make it as a local variable. Something like:
DECLARE schema_name NVARCHAR(300) := 'tuser';
indexed_tables = SELECT DISTINCT "TABLE_NAME" FROM "SYS"."FULLTEXT_INDEXES" WHERE "SCHEMA_NAME" = :schema_name ;
but i can not transform the top 'exec ...' statement into 'result = SELECT ...' because it always says that it can not pass the scalar value into the 'FROM ...' part.

Extension Name space is invalid.

I am using flashbuilder 4.7 with AIR SDK 15.0 on adding ANE i got following error.
Process terminated unexpectedly.
The content cannot be loaded because there was a problem loading an extension: Error: Extension namespace is invalid for C:\Users\New\Adobe Flash Builder 4.7\.metadata\.plugins\com.adobe.flexbuilder.project.ui\ANEFiles\SampleTest\win32\sampleO utput.ane
I have ensured Extension Id are same in Extension.xml and discripter file.

In the output message, you have a space in the ANE file name, "sampleO utput.ane". Check to see the path to the ANE is correct, including the filename.

Name prefix reservation invalid

Similar Messages

Maybe you are looking for