Name server not updated in development configuration after change of SLD

Hi Guys
Hope you can help me with this one.
We have moved our SLD from one server to another.
After this we changed the name server in NWDI and in NWDS.
In NWDS i removed the development configuration and reimported it, but when I do this, a popup box shows the details of the development configuration and the name server is still the old SLD server. This means that when I start the NWDS I get an error saying that the name server host is unreachable.
Where do I change this?
I found out that the name server is setup in the .confdef file under .dtc\0 in the field called name-server-url. If I change this manually in the file, it works. But if I remove the development configuration and reimport it again, I am taken back to the old name server again.
It seems as if something has to be changed in NWDI, but I can't figure out what.
Can anybody help?
Cheers,
Jacob Vennervald

Hi Jacob,
I would proceed as follows: 
- login to your new SLD 
- go to the technical systems in the landscape area of the SLD 
- in the filter drop down select AS JAVA 
- check if your NWDI has reported to this SLD in the last 12 or 24 hours, you can check this on the "last update" column 
- if your system has reported to this sld the last few hours this is good if not go to the step "change J2ee to new sld" i will descirbe later. 
- remember the name of the system here. it is like sid on dbhostname. 
- got to sld administration (link on top) choose content maintenace in administration 
- in the subset filter select "All with instances" as class set SAP AS JAVA Cluster 
- you should find your system there. click on it. 
- in the new screen find a link in the middle top <nr> associated instances -> click it 
- in the next screen you will see the relationship of the technical system to the rest of the sld data. 
- there should be a topic called "hosted application server" 
- the should be an entry like: system landscape directory: sld on sid on server -> click it 
- here you will see the data for this hosted system. You can find the cim/url definig the SLD you will find the roles. Landscape and name server should assigend and so on here you can chage the SLD url. 
You can although proceed as follows. This as well requieres you nwdi to report and use this sld in j2ee see below if not. 
- on sld startscreen choose landscapes in the landscapes part of sld 
- select landscape type nwdi systems 
- if there is no landscape you can create one 
- in the landscape ypu can assinge systems. The sld should be availabel to choose. 
- once in the landscape you can view the system and you can change the CIM Server url and the roles there aswell its just another view on the content. 
 
you can although check: 
- open name reservation from develpoment part of start screen 
- here you should find a button about enabling or disabling the sld for nwdi usege. this should be of course enabled... 
 
"change J2ee to new sld" Ok and here what to do or to check if you are not sure if your NWDI uses/reports to the new sld. 
- Go to the nwdi server an open Visual admin i asume you are running a 7.0 Di if not let me knoe i can although tell you for CE. 
- ok in VA. select on of your server nodes->services->SLD data supplier. 
- an overview page will show up. 
- select the http settings tab in the lower middle. 
- https settings will tell the j2ee where to report to. Verify the data and change if needed. use the lightinigbolt button on top to transfer data to the sld. have a little patiance if your data is not shown immediately in your sld,. it may take 1-2 minutes until it is shown in the gui. 
- switch to cim client generation tab. those paraemters will tell your j2ee from what sld to read data from. It is important to understand that you may report to one sld but to read from antioher. depending on your sld landscape. The CIm CLient should use the same Sld as your NWDI uses in CMS setting. 
- if all is setup. do a cim client test. 
 
Allright. This is all I know on how the NWDI is integrated in SLD. Hope you can resolve your problem wiht this steps.
 
Have a good time 
Jan

Similar Messages

Data not updated in business entity after change in architectural object

Hi,
A business entity was created from Architectural Object.
When we modify the address in the architectural object, the data is not updated in the business entity.
Is there any solution that make an automatic update for the address in business entity after a change in architectural object ?
Thx for your help.
Regards
Saad

Hi,
I have created new infopackage and ran. Now the following message I have got on the monitor.
"Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
Any more thoughts?
Thanks,
Rao.

Modified by column the user name is not updated

Hi
I am using the client side object model to upload the document in the document library, its working fine, but the modified by column the each user name is not updated, instead of system name is updated for all the
upload.
In the below screen shot where all the documents uploaded by the different users but its show the only the system instead of user name how to solve the issue.

thanks Hemendra
Agrawal
i will
try it another one issue
i cant able to upload the file size >1 MB its showing error."the remote server returned an error (400) bad request."
i tried your previous post but its not working.

Folio producer not updating folios on app after publishing folios

Folio producer not updating folios on app after publishing folios, before May updates it used to update my folios right away, it's been 2 days and my folios has not been published or updated. please help

yes I did, i even unpublished the folios adn then published them again, i made them public when publishing and it still doesn't make the updates on the app, on the folio producer it shows the latest files and that the updates request was sucessfull. But istill no updtes on app,
please help

Update of project planning after change in activity type

Hello Experts,
we are doing manual activity input planning ( CJ40 ) via customer report per year equal to project dates.
This means if we change activity plan price ( KP26 ) in future years, we need to recalculate the planned values in project system.
If we manually change values in CJ40 after changes in KP26 the system calculates the new monetary value in background
Example: Planned on project 10 Hrs a 20€ = 200€ // change price of activity type to 30€ // Plan 1 additional hour in CJ40: Monetary value changes to 11 Hrs a30€ = 330€ and posts +1 Hr with +130€ price difference.
Is there a opinion to adjust/update the monetary value after changes in KP26 without changing plan values?
Thanks

Hi Frank,
I am not sure what kind of project cost planning you are using. Usually it is either direct WBS cost planning with CJR2 or cost roll up from Network Activities and Orders or ECP.
The system will take AType price relevant for the period. If you have 100 hours with price 20 for Year N and 50 hours with price 30 for Year N+1, the planned cost will be 2000 + 1500 = 3500.
CJ40 is the Overall Planning, but you still can select a year (as a period). In the Overall view you have no button for Activity Input, it will show up only when you select a year.
Regards,
Paulo

When Photoshop opens it says "Welcome John". My name is not John. How can I change this?

When Photoshop opens the welcome screen says "Welcome John". My name is not John. How can I change this?

Hello Gene,
I am just a single account holder. However I looked under Help as you suggested and it said I was signed in with a strange e-mail address.
I signed out and then signed in agani with my own e-mail address and it now has my correct name.
Very weird, but thank you for pointing me in the right direction.
Tog

Problem with ios certificate server not updating the CRL

Hi all,
The background is that i'm currently setting up a DMVPN solution with the ipsec tunnels between the spokes created using certificates.
I'm using a cisco 877 as the CA server (its running 12.4(6)T5) to provide the certificates to the spoke routers. This part is working fine - the spokes can request a certificate and get one issue all well and good.
The problem is on the CA, the CRL lifetime is set to 24 hours but the CA is not updating the CRL so when the spokes look for the revocation list (as set in their trustpoint) they are reporting an error that the CRL is out of date and won't connect.
If is do a '#sh crypto pki server' it lists a 'CRL NextUpdate timer. this has a timestamp that is 24 hours after the last certificate was revocked. The only way i can get the CRL to be re-generated is to revoke a certificate.
So, my question is, have i missed something here? I thought the CA would automatically generat a new CRL file every 24hours.
Can anyone help?
thanks.

Hi Mark (?)
this seems to match this bug:
CSCsy95838    IOS CA: CRL not updated, update timer no started
However it does not mention if 12.4(6)T5 is affected, only that it was found in 12.4(15)T3 and resolved in 12.4(15)T10 and other more recent releases.
I would suggest trying the latest 12.4(15)Tx, 15.0(1)Mx or 15.1(4)Mx release if you can.
I supposed you've though of it, but just in case: as a workaround you can disable the CRL check on all the DMVPN routers, obviously they will still allow connections from routers with a revoked spoke.
As a (temporary?) replacement for a CRL, you could use a "certificate ACL" with which you can kind of create a "manual local CRL" :
crypto pki certificate map certACL 10
   serial-number ne
   serial-number ne
   etc.
crypto pki trustpoint myTP
   match certificate certACL
(note the "ne" stands for "not equal" so you are permitting any certificate whose serial number is not listed)
Obviously you would have to configure (and maintain!) this on each router participating in the DMVPN so this is cumbersome, but I suppose if you don't often revoke certs it might be an option.
hth
Herbert
If this post answers your question, please click the "Correct Answer" button

SAP Installation Server not patching client pc's after patching itself

Hi
We have setup Installation Server and used it to deploy SAP GUI successfully to client pc's. We encountered a problem in trying to update the installation server with patch level 22. After the patch SAP reported that numerous files or folders were missing on the installation source. Also the client pc GUI's would then display a message saying that a newer version of the GUI was available and would prompt for a response. "Yes" would appear to reinstall the GUI and would give an error afterwards and a "no" would do nothing, only asking to reinstall the next time round.
We tried to remove the installation server and reinstall it using a different share name. After removing the old share the client GUI's would no longer prompt but also do not update correctly. We again tried to reinstall the installation server to the old share name and although the clients do not prompt, they also do not update; plus the installation server still shows a patch 22 as being applied!
Is there any way to roll back the installation server completely (i.e. before the patch level)? If not what could I check to make sure that the installation server at least updates the client GUI's correctly?

We did some tests again to try piece together what happened. The only thing that seems to have happened is that someone had removed the installation package that the clients were using although we can't be sure if that was the problem.
We were about to reinstall on the share when we decided to try to update the patch level once more. The strange thing seems that after we patched the Installation Server to level 23 the clients were responding correctly to the IS again! Since then they have been able to update with seemingly no issues.

BAPI_SALESORDER_CREATEFROMDAT2 is not updating the ITEM Qty after Free ITEM

Hi,
I am using BAPI_SALESORDER_CREATEFROMDAT2 to create a order.We have customization for populating a FREE ITEM for a Order ITEM.
Now the Problem is that .....if I am passing more then one Material as ITEM it is not updating the next ITEM Qty and also not populating FREE ITEM afterwords first one.
Please help me.
Regards
Ricky

Hi,
Find below the code :
read table i_table_t into lwa_table_s index 1.
if sy-subrc eq 0.
*Order Header
    lwa_ord_head_in-doc_type          = 'ZSO'.
    lwa_ord_head_in-sales_org         = '1000'.
    lwa_ord_head_in-distr_chan        = '10'.
    lwa_ord_head_in-division          = '10'.
    lwa_ord_head_in-req_date_h        = lwa_table_s-delivery.
*Order Header Update
    lwa_ord_head_inx-doc_type         = 'X'.
    lwa_ord_head_inx-sales_org        = 'X'.
    lwa_ord_head_inx-distr_chan       = 'X'.
    lwa_ord_head_inx-division         = 'X'.
    lwa_ord_head_inx-req_date_h       = 'X'.
    lwa_ord_partners-partn_role       = 'AG'.
    lwa_ord_partners-partn_numb       = lwa_table_s-sold_to.
    append lwa_ord_partners to lt_ord_partners.
    if lwa_table_s-ship_to is initial.
      lwa_ord_partners-partn_role     = 'WE'.
      lwa_ord_partners-partn_numb     = lwa_table_s-sold_to.
      append lwa_ord_partners to lt_ord_partners.
    else.
      lwa_ord_partners-partn_role     = 'WE'.
      lwa_ord_partners-partn_numb     = lwa_table_s-ship_to.
      append lwa_ord_partners to lt_ord_partners.
    endif.
    lt_table_it_t = lwa_table_s-zsd_table_it_t.
    loop at   lt_table_it_t into lwa_table_it_s.
      lwa_ord_items_in-material      = lwa_table_it_s-matnr.
      lwa_ord_items_in-plant         = wa_table_s-plant.
      lwa_ord_items_in-target_qty    = lwa_table_it_s-qty.
      lwa_ord_items_in-comp_quant    = lwa_table_it_s-qty.
      append lwa_ord_items_in to lt_ord_items_in.
      lwa_ord_items_inx-material     = 'X'.
      lwa_ord_items_inx-plant        = 'X'.
      lwa_ord_items_inx-target_qty   = 'X'.
      lwa_ord_items_inx-comp_quant   = 'X'.
      lwa_ord_items_inx-updateflag   = 'I'.
      append lwa_ord_items_inx to lt_ord_items_inx.
Schedule Line Information
      lwa_schedule_lines-sched_line = 'X'.
      lwa_schedule_lines-req_date    = lwa_table_s-date_del.
      lwa_schedule_lines-date_type   = '1'.
      lwa_schedule_lines-req_qty     = lwa_table_it_s-qty.
      append lwa_schedule_lines to lt_schedule_lines.
      lwa_schedule_lines_x-updateflag = 'I'.
      lwa_schedule_lines_x-sched_line = 'X'.
      lwa_schedule_lines_x-req_date   = 'X'.
      lwa_schedule_lines_x-date_type = 'X'.
      lwa_schedule_lines_x-req_qty    = 'X'.
      append lwa_schedule_lines_x to lt_schedule_lines_x.
    endloop.
Here I am getting First Item and it's free configured Item perfectly for the Qty 1.
But when I pass more then 1 Qty or Multiple ITEMS it is not populating other respective free configured ITEMS with them.Also IT is not updating the other ITEM Qty other the first one.
For Example:
Item No      ITEM            Qty           .......
10             ITEM1           1 EA        ..........
20             FREE1          1 DAY     ..........
30             ITEM2            0             ..........
40             ITEM3            0             .........
In above example After 30 and 40 two Free ITEM should be generated with 1 Day and for Qty 1 EA
Regards
Ricky

Deactivation date is not updating in Asset Master after retirement (ABAON)

Dear Experts,
Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation). Below is the asset and class:
Asset name: Maruti Baleno
Asset Class: Vehicles
Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
Thanks,
Francis.J

Dear Atif Farooq,
In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
200 Retirement without revenue
210 Retirement with revenue
When am trying to update manually below error appearing in AS02
Deactivation not possible. Dep.area 15 has acquisition values
Message no. AA296
Diagnosis
You cannot deactivate, since acquisition values are still present in depreciation area 15.
Procedure
Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
The above asset procured in the year of 2009 and same has been retired 2009.
Thanks,
Francis J

Customer name is not updating in Organization model

Hi All,
One employee is created with the name "test customer" in ECC and it is assigned to organization model in CRM. After that the the employee name is changed fom test customer to __customer test. Now same changes is updating in CRM but not updating in Organization model?
can you plz tell me why the employee is not updating in Organization model?
Edited by: prajesh24 on Jun 16, 2011 11:08 AM
Edited by: prajesh24 on Jun 16, 2011 11:32 AM

Hi
The changes to the business partner data flows through the middleware in run time.
But if you assigned the user with some initial name as XYZ. Then change the name of the business partner to X1Y1Z1, then you need to remove the earlier entry in the name of XYZ and assign the new entry X1Y1Z1 manually.
As a standard, it will not update the name in the organisational data in CRM.
Hope this will be helpful.
Regards

Develop changes not reflected in Exported files after changing PCs?

Hi,
I recently upgraded to a new laptop so installed LR3 on the new laptop. I them imported the Catalog etc.
When I browse of a folder of my library (that I developed on the old laptop just before the upgrade) I initially see the undeveloped picture but after a second or so it updates the picture to reflect my develop changes made previously. So, it appears the import has worked succesfully etc.
However, I then tried to export a selection of these pictures to a new location so that I could isolate and upload to a photo printing site. Once the export was complete I noticed that the jpg files exported to the new folder do NOT contain the develop changes I made.
I am a bit stumped now - I know that before changing Laptops I had exported some of these photos from the same folder (to burn to cd and send to a friend) the exported files definitely reflected the develop changes.
Can someone please help me understand what has gone wrong?
Many Thanks in advance for any replies

Thanks for the response and apologies for my late reply - been away for a few days.
I checked the output format and it was set to JPG - not Original.
But I think the problem was down to my mixing up my catalogs - I normally have my catalog on a NAS drive with a SUBST drive letter and with a backup on the local drive every now and then.
I think I may have opened the wrong catalog (the local one) - still dont understand how the changes I made were still refelected when viewing the file in LR3 - weird!
Thanks again!

I downloaded an Adobe plug in and it will not update my computer even after a restart.

I downloaded an Adobe plug in and it will not update in my computer even after a restart. Any ideas?

to do an up-date you will need the original app. Then you can up-date

Delivery block not updated in sales order after released VKM3

Hi all,
I am facing below error
after released credit block throuh VKM3 also i am unable to delivery becasue it is not updated still block exist in sales order level.
i made all nacessary settings for that and also i tried through VKM1 but this tcode through error no poosible entries.
Thanks in advance
Srinivasa

hi,
check the following steps of assignment you did right or not
1)first check in t- code FD32 U assigned authorization person & each credit limit U shud assign
an authorization person along with credit limit
2) check - conditon records with KRML output is there or not
please read standard SAP config help as a check point doc.[Credit mgmt|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf]
Let me know if it is soling your issue...
rgards,
rajeev

TestStand not updating th description after using the edit substep

I've created numerous custom steps in TestStand. None of them will update the description after I use the edit substep and change some of that steps properties. As an example, I have the following step description...
str(Step.Channel.DeviceName)
After I use the edit substep, which changes step.Channel.DeviceName, the description does not update. However, if I then open the properties menu for that item and either select "OK" of "Cancel" to leave the property window, it then updates to the correct values. Placing down a new step will also force the description to update. While this is not functionally causing any problems, it would be nice if the descriptions updated immediatly.

Hey Dillon,
The reason it doesn't update is because the sequence editor doesn't know that the sequencefile has changed so it doesn't know to redraw that window. You can force it to redraw the window by calling the method IncChangeCount from the PropertyObjectFileClass. If you increment the change count it should automatically update the description as soon as your edit substep completes. Also a piece of advice, in the future if you have TestStand questions, you can probably get a quicker answer to them by posting on the TestStand forums, even if it is using the TestStand API in another programming environment like LabVIEW or CVI. Hope this helps!
Message Edited by Patrick P. on 12-06-2006 06:38 PM
Pat P.
Software Engineer
National Instruments

Name server not updated in development configuration after change of SLD

Similar Messages

Maybe you are looking for