NameFromLastDDL Error during java stored procedure upload...

Hi guys,
I am trying to upload a class to send email within a java stored procedure.
JDeveloper fails to upload the class, and the error message doesn't help me:
I guess the automatically generated SQL statment features a "NameFromLastDDL" argument, but i have no control over that....anybody had this issue before ?
Following, the "ugly" exception:
Error while creating class client/Utils
ORA-06550: line 1, column 91:
PLS-00201: identifier 'NameFromLastDDL' must be declared
ORA-06550: line 1, column 85:
PL/SQL: Statement ignored
java.sql.SQLException: ORA-06550: line 1, column 91:
PLS-00201: identifier 'NameFromLastDDL' must be declared
ORA-06550: line 1, column 85:
PL/SQL: Statement ignored
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:184)
     at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:873)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3076)
     at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4273)
     at oracle.aurora.server.tools.loadjava.ClientClassObject.create(ClientClassObject.java:68)
     at oracle.aurora.server.tools.loadjava.SchemaObject.process1(SchemaObject.java:223)
     at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:530)
     at oracle.aurora.server.tools.loadjava.LoadJava.addClass(LoadJava.java:584)
     at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:434)
     at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:378)
     at oracle.aurora.server.tools.loadjava.LoadJava.addJar(LoadJava.java:717)
     at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:430)
     at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:378)
     at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:347)
     at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:643)
     at oracle.aurora.server.tools.loadjava.LoadJava.processDeferredFiles(LoadJava.java:615)
     at oracle.aurora.server.tools.loadjava.LoadJava.process(LoadJava.java:806)
     at oracle.jdeveloper.deploy.tools.OracleLoadjava.deploy(OracleLoadjava.java:116)
     at oracle.jdeveloper.deploy.tools.OracleLoadjava.deploy(OracleLoadjava.java:46)
     at oracle.jdevimpl.deploy.OracleDeployer.deploy(OracleDeployer.java:97)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:473)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:360)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeployToMostRecent(StoredProcHandler.java:256)
     at oracle.jdevimpl.deploy.StoredProcProfileDt$2.run(StoredProcProfileDt.java:193)
The following operations failed
class client/Utils: creation (createFailed)
oracle.aurora.server.tools.loadjava.ToolsException: Failures occurred during processing
     at oracle.aurora.server.tools.loadjava.LoadJava.process(LoadJava.java:863)
     at oracle.jdeveloper.deploy.tools.OracleLoadjava.deploy(OracleLoadjava.java:116)
     at oracle.jdeveloper.deploy.tools.OracleLoadjava.deploy(OracleLoadjava.java:46)
     at oracle.jdevimpl.deploy.OracleDeployer.deploy(OracleDeployer.java:97)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:473)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:360)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeployToMostRecent(StoredProcHandler.java:256)
     at oracle.jdevimpl.deploy.StoredProcProfileDt$2.run(StoredProcProfileDt.java:193)

I think u dont've previleges to run
the procedure.
<BLOCKQUOTE>quote:<HR>Originally posted by arunr12:
hi I am calling java stored procedure from jdbc. i am getting wierd exceptions:
CallableStatement cstmt = conn.prepareCall("begin SEND_MAIL(?,?,?);end;");
cstmt.setString(1,"[email protected]");
cstmt.setString(2,"Mail from Stored Proc");
cstmt.setString(3,"This is test mail from Oracle8i");
cstmt.execute();
i am getting following Exception:
java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception: java.security.AccessControlException: the Permission (java.util.PropertyPermission * read,write) has not been granted by dbms_java.grant_permission to SchemaProtectionDomain(ISTORE_CUST|PolicyTableProxy(ISTORE_CUST))
ORA-06512: at "ISTORE_CUST.SEND_MAIL", line 0
ORA-06512: at line 1
<HR></BLOCKQUOTE>
null

Similar Messages

Error deploying java stored procedure

Anyway, I've got a really simple java function that takes an XML document in a CLOB as a parameter and simply returns whether or not it's a valid document. Works fine in JDeveloper, but when I try to load it into the database, I get:
Errors in cdh_j_validate:
ORA-29521: referenced name oracle/xml/parser/v2/DOMParser could not be found
The XML Parser is installed on the database and is functioning properly.. I am deploying my Java stored procedure to the same schema that the xml parser was installed into. Any suggestions?
Thanks in advance,
Craig Drabik
null

This is due to a current restriction in the loadjava utility. The following is the excerpt from the Release notes on the subject:
<BLOCKQUOTE>quote:<HR>
Incomplete Deployment to Oracle8i When Using JDBC Thin Driver and Net8 Name-value List (1250825)
In the Connection Manager, it is possible to create a connection to Oracle 8i using the Oracle JDBC Thin driver and Net8 name-value pairs as the connection method. This connection can be viewed in the Database Browser, but deployment will not complete because the loadjava utility requires a database string of the form "@host:port:SID" when using the Oracle JDBC Thin driver.
There are two work-arounds to this problem:
Use the Named Host connection method instead of Net Name-Value Pair when creating this connection type in the Connection Manager.
Use the Oracle JDBC OCI-8 driver instead of the Oracle JDBC Thin driver. To use the Oracle JDBC OCI-8 driver with JDeveloper, please see the section entitled 'Connection Requirements for OCI and Type 2 JDBC Drivers' in the online documentation.
<HR></BLOCKQUOTE>
-- Brian

Error on Java Stored Procedure

I am trying to create a Java Stored Procedure that I will be calling via a trigger on the OP metadata. I have deployed my Java code, created a PL/SQL procedure "AS LANGUAGE JAVA" etc, and verified that the procedure works in a schema on the same instance where the OP schema resides. However, when I try to run the same code in the 'PORTAL30' schema, I get an exception:
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: Root of all Java exceptions
ORA-06512: at "PORTAL30.TEST_METHOD", line 0
ORA-06512: at line 1
Now my procedure does to some wacky stuff like run commands in the DOS shell, but I've granted the same set of permissions to both schemas, and it works in one but not in the PORTAL30.
Is there something 'special' about PORTAL30 that I should be aware of when it comes to calling Java Stored Procedures?
Thanks!
- John Emmer

What is the full error message?
This cannot be setARRAY error.
To connect to Oracle database use this syntax:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
oConn = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:XE", "<user>", "<user password>");
where
"jdbc:oracle:thin:@localhost:1521:XE" is a JDBC syntax
 where "localhost" is Oracle server name or IP address
 1521 is a port number of the listener on oracle server (localhost)
 XE is a database service
<user> is existing user name - schema owner for your procedure
<user password> is a password for <user>Example:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
oConn = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:XE", "SCOTT", "TIGER");
...HTH
Thomas

Error loading Java Stored Procedure

When I attempt to deploy a java stored procedure using JDeveloper I get the following error: "ORA-29545: badly formed class: User has attempted to load a class (TestingJava.Testerama) into a restricted package. Permission can be granted using dbms_java.grant_permission(<user>, LoadClassInPackage...". I have attempted to grant the proper permissions but get a "java.lang.SecurityException: policy table update" error. The user granting the permissions has the Java_Admin role. What do I do?
null

I think u dont've previleges to run
the procedure.
<BLOCKQUOTE>quote:<HR>Originally posted by arunr12:
hi I am calling java stored procedure from jdbc. i am getting wierd exceptions:
CallableStatement cstmt = conn.prepareCall("begin SEND_MAIL(?,?,?);end;");
cstmt.setString(1,"[email protected]");
cstmt.setString(2,"Mail from Stored Proc");
cstmt.setString(3,"This is test mail from Oracle8i");
cstmt.execute();
i am getting following Exception:
java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception: java.security.AccessControlException: the Permission (java.util.PropertyPermission * read,write) has not been granted by dbms_java.grant_permission to SchemaProtectionDomain(ISTORE_CUST|PolicyTableProxy(ISTORE_CUST))
ORA-06512: at "ISTORE_CUST.SEND_MAIL", line 0
ORA-06512: at line 1
<HR></BLOCKQUOTE>
null

Error calling Java Stored Procedure

hi I am calling java stored procedure from jdbc. i am getting wierd exceptions:
CallableStatement cstmt = conn.prepareCall("begin SEND_MAIL(?,?,?);end;");
cstmt.setString(1,"[email protected]");
cstmt.setString(2,"Mail from Stored Proc");
cstmt.setString(3,"This is test mail from Oracle8i");
cstmt.execute();
i am getting following Exception:
java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception: java.security.AccessControlException: the Permission (java.util.PropertyPermission * read,write) has not been granted by dbms_java.grant_permission to SchemaProtectionDomain(ISTORE_CUST|PolicyTableProxy(ISTORE_CUST))
ORA-06512: at "ISTORE_CUST.SEND_MAIL", line 0
ORA-06512: at line 1
null

I think u dont've previleges to run
the procedure.
<BLOCKQUOTE>quote:<HR>Originally posted by arunr12:
hi I am calling java stored procedure from jdbc. i am getting wierd exceptions:
CallableStatement cstmt = conn.prepareCall("begin SEND_MAIL(?,?,?);end;");
cstmt.setString(1,"[email protected]");
cstmt.setString(2,"Mail from Stored Proc");
cstmt.setString(3,"This is test mail from Oracle8i");
cstmt.execute();
i am getting following Exception:
java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception: java.security.AccessControlException: the Permission (java.util.PropertyPermission * read,write) has not been granted by dbms_java.grant_permission to SchemaProtectionDomain(ISTORE_CUST|PolicyTableProxy(ISTORE_CUST))
ORA-06512: at "ISTORE_CUST.SEND_MAIL", line 0
ORA-06512: at line 1
<HR></BLOCKQUOTE>
null

Error while deploying a Java Stored Procedure using JDeveloper

Hi,
I was going thru the Oracle By Example article: "Developing SQL and PL/SQL with JDeveloper". (http://www.oracle.com/technology/obe/obe9051jdev/ide1012/plsqlobe/obeplsql.htm)
One of the items in this article is - "Creating and Deploying a Java Stored Procedure"
I was able to create a java class, compile it. Created a deployment profile. created a pl/sql wrapper. While trying to deploy the java stored procedure, I am getting the following error:
Invoking loadjava on connection 'hr_conn' with arguments:
-order -resolve -thin
errors : class package1/mypackage/JavaStoredProc
ORA-29521: referenced name java/lang/StringBuilder could not be found
The following operations failed
class package1/mypackage/JavaStoredProc: resolution
oracle.aurora.server.tools.loadjava.ToolsException: Failures occurred during processing
     at oracle.aurora.server.tools.loadjava.LoadJava.process(LoadJava.java:863)
     at oracle.jdeveloper.deploy.tools.OracleLoadjava.deploy(OracleLoadjava.java:116)
     at oracle.jdeveloper.deploy.tools.OracleLoadjava.deploy(OracleLoadjava.java:46)
     at oracle.jdevimpl.deploy.OracleDeployer.deploy(OracleDeployer.java:97)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:474)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:361)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:285)
     at oracle.jdevimpl.deploy.StoredProcProfileDt$Action$1.run(StoredProcProfileDt.java:383)
#### Deployment incomplete. #### Oct 27, 2005 1:38:56 PM
Appreciate your help on this..

I am using Jdeveloper 10.1.3 Early Access Version. JDK comes with it. I also have another JDK on my machine (JDK1.4.2_09)

Error while executing java stored procedure from a pl/sql procedure

We have a requirement where we need to execute JAVA code stored in an Oracle database (Java Stored Procedure). This code uses some JAR files which we have already loaded without any errors in the database.
The class file was also loaded in the database without any errors. But when we execute the method of this class (JAVA code), it gives the following error:
ORA-29532: Java call terminated by uncaught Java exception:
java.lang.NoClassDefFoundError
Is there any way of debugging the code and getting to know where exactly the problem is? Or, any tool/software available for doing the same.
Any pointers would be of great help!
Thanks in advance

Hi Uday,
My guess is that there is a problem with your java stored procedure that is causing the "ExceptionInInitializer" error to be thrown. According to the javadoc:
is thrown to indicate that an exception occurred during
evaluation of a static initializer or
the initializer for a static variable
Since I didn't see any of your code in your post, I can't help you much more, I'm afraid. Perhaps if you would provide some more details, I may be able to help you some more. I think the following details would be helpful:
1. Complete error message and stack trace you are getting.
2. The section of your java code that you think is causing the problem.
3. Oracle database version you are using.
Good Luck,
Avi.

While executing java stored procedure i got an error

I have used this command to load java source into data base
loadjava -user ENCORA/ENCORA C:\framework\Packages\testdevelopement\HOST.java
but while executing i got an error.
SQL> create or replace function run_cmd(p_cmd in varchar2) return number
2 as
3 language java
4 name 'HOST.RunThis(java.lang.String[]) return integer';
5 /
Function created.
SQL> create or replace procedure RC(p_cmd in varchar2)
2 as
3 x number;
4 begin
5 x := run_cmd(p_cmd);
6 end;
7 /
Procedure created.
SQL> set serveroutput on size 1000000
SQL> exec dbms_java.set_output(1000000)
PL/SQL procedure successfully completed.
SQL> exec rc('/usr/bin/ps -ef');
BEGIN rc('/usr/bin/ps -ef'); END;
ERROR at line 1:
ORA-29540: class HOST does not exist
ORA-06512: at "ENCORA.RUN_CMD", line 0
ORA-06512: at "ENCORA.RC", line 5
ORA-06512: at line 1
can any one suggest me how can i resolve this problem?

Hi Uday,
My guess is that there is a problem with your java stored procedure that is causing the "ExceptionInInitializer" error to be thrown. According to the javadoc:
is thrown to indicate that an exception occurred during
evaluation of a static initializer or
the initializer for a static variable
Since I didn't see any of your code in your post, I can't help you much more, I'm afraid. Perhaps if you would provide some more details, I may be able to help you some more. I think the following details would be helpful:
1. Complete error message and stack trace you are getting.
2. The section of your java code that you think is causing the problem.
3. Oracle database version you are using.
Good Luck,
Avi.

Error while executing Java Stored Procedure.

Hi,
When I'm trying to execute my java stored procedure i'm getting the following error:
ORA-29532: Java call terminated by uncaught Java exception: java.lang.ExceptionInInitializerError
Does anybody has idea why this error comes and how can be resolved.
Thanks in advance.
Uday

Hi Uday,
My guess is that there is a problem with your java stored procedure that is causing the "ExceptionInInitializer" error to be thrown. According to the javadoc:
is thrown to indicate that an exception occurred during
evaluation of a static initializer or
the initializer for a static variable
Since I didn't see any of your code in your post, I can't help you much more, I'm afraid. Perhaps if you would provide some more details, I may be able to help you some more. I think the following details would be helpful:
1. Complete error message and stack trace you are getting.
2. The section of your java code that you think is causing the problem.
3. Oracle database version you are using.
Good Luck,
Avi.

Calling the Java Method in PL/SQL Java Stored procedure errors out

Hi,
I could not find a suitable thread to post my PL/SQL question so iam posting it here.........
I have written a java class by name XYZ which has a method ABC for which there are 9 arguements being passed and its a VOID method.
This java class has been loaded into ORACLE using DBMS_JAVA.LOADJAVA pkg, Now this class is being called in the oracle as a JAVA Stored procedure...... When ever im trying to call the procedure it throws the following error
ORA-29531: no method
*Cause:    An attempt was made to execute a non-existent method in a
Java class.
*Action:   Adjust the call or create the specified method.
The code snippet as follows
JAVA CODE:
Class xyz
public static void Abc (String hostName,
int port,
String serviceURL,
String soapAction,
int timeOut,
String wsUser,
String wsPasWd,
String keyStore,
String keyStorePasWd)
//method implementation
JAVA STORED PROCEDURE:
create OR REPLACE procedure ABC_JAVA_SP_CALL
(p_hostname in varchar2, p_port in number, p_serviceurl in varchar2, p_soapaction in varchar2, p_timeout in number, p_wsuser in varchar2, p_wspasswd in varchar2, p_ks_path in varchar2, p_ks_passwd in varchar2)
as
language java
name 'xyz.Abc(java.lang.String, int, java.lang.String, java.lang.String, int, java.lang.String, java.lang.String, java.lang.String, java.lang.String)';
When i try to call
declare
p_hostname varchar2(100);
p_port number;
p_serviceurl varchar2(100);
p_soapaction varchar2(100);
p_timeout number;
p_wsuser varchar2(100);
p_wspasswd varchar2(100);
p_ks_path varchar2(100);
p_ks_passwd varchar2(100);
begin
//SP which returns the values for the required parameters.
comppkg.getvcsinfo(
p_hostname,
p_port ,
p_serviceurl,
p_soapaction,
p_timeout,
p_wsuser,
p_wspasswd,
p_ks_path,
p_ks_passwd
Layer7_icengc_ws_tes(p_hostname,
p_port ,
p_serviceurl,
p_soapaction,
p_timeout,
p_wsuser,
p_wspasswd,
p_ks_path,
p_ks_passwd);
end;
This thing ends up with
29531. 00000 - "no method %s in class %s"
*Cause:    An attempt was made to execute a non-existent method in a
Java class.
*Action:   Adjust the call or create the specified method.
Im not understanding what wrong am i doing
pls help
Edited by: madhusudan on Feb 12, 2013 8:07 PM

Hello,
there is the forum {forum:id=65} for questions about using Java within Oracle.
Regards
Marcus
Edited by: Marwim on 13.02.2013 07:56
I could not find a suitable thread to post my PL/SQL question so iam posting it here.........You got the hint to the correct forum alread in another thread {message:id=10837976}
And if you think this is not related to Java but PL/SQL, then you should ask in {forum:id=75}

Out of memory error when calling a java stored procedure multiple times

Trying to run a PL/SQL loop calling a java stored procedure, I get the following error:
"ORA-04030: out of process memory when trying to allocate 262188 byte callheap,ioc_allocate free)"
(with some other error lines).
The stored procedure does two major things:
1) Open a socket to communicate with a server, of which it queries some data.
2) Use JDBC (with the default DB connection it has, as a stored procedure) to write the results to a table.
All socket connections, statements, etc. are properly closed and all memory should be garbage collected between each call.
Can anyone offer an explanation or additional checks to make? I'm quite sure the code isn't causing the problem, since I've tried running it as a stand alone application (outside of Oracle) and didn't have any problems.
Thanks.

Hi,
Verify that the database parameters are set correctly.
EA

Missing Defines Error in Simple Java Stored Procedure

Anyone have any suggestions on what might be causing the unusual behavior described below? Could it be a 10g java configuration issue? I am really stuck so I'm open to just about anything. Thanks in advance.
I am writing a java stored procedure and am getting some SQLException's when executing some basic JDBC code from within the database. I reproduced the problem by writing a very simple java stored procedure which I have included below. The code executes just fine when executed outside of the database (10g). Here is the output from that execution:
java.class.path=C:\Program Files\jEdit42\jedit.jar
java.class.version=48.0
java.home=C:\j2sdk1.4.2_04\jre
java.vendor=Sun Microsystems Inc.
java.version=1.4.2_04
os.arch=x86
os.name=Windows XP
os.version=5.1
In getConnection
Executing outside of the DB
Driver Name = Oracle JDBC driver
Driver Version = 10.1.0.2.0
column count=1
column name=TEST
column type=1
TEST
When I execute it on the database by calling the stored procedure I get:
java.class.path=
java.class.version=46.0
java.home=/space/oracle/javavm/
java.vendor=Oracle Corporation
java.version=1.4.1
os.arch=sparc
os.name=Solaris
os.version=5.8
In getConnection
We are executing inside the database
Driver Name = Oracle JDBC driver
Driver Version = 10.1.0.2.0
column count=1
column name='TEST'
column type=1
MEssage: Missing defines
Error Code: 17021
SQL State: null
java.sql.SQLException: Missing defines
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:158)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.OracleResultSetImpl.getString(Native Method)
at OracleJSPTest.test(OracleJSPTest:70)
Here is the Java code:
// JDBC classes
import java.sql.*;
import java.util.*;
//Oracle Extensions to JDBC
import oracle.jdbc.*;
import oracle.jdbc.driver.OracleDriver;
public class OracleJSPTest {
private static void printProperties(){
     System.out.println("java.class.path="+System.getProperty("java.class.path"));
     System.out.println("java.class.version="+System.getProperty("java.class.version"));
     System.out.println("java.home="+System.getProperty("java.home"));
     System.out.println("java.vendor="+System.getProperty("java.vendor"));
     System.out.println("java.version="+System.getProperty("java.version"));
     System.out.println("os.arch="+System.getProperty("os.arch"));
     System.out.println("os.name="+System.getProperty("os.name"));
     System.out.println("os.version="+System.getProperty("os.version"));
private static Connection getConnection() throws SQLException {
     System.out.println("In getConnection");
Connection connection = null;
// Get a Default Database Connection using Server Side JDBC Driver.
// Note : This class will be loaded on the Database Server and hence use a
// Server Side JDBC Driver to get default Connection to Database
if(System.getProperty("oracle.jserver.version") != null){
          System.out.println("We are executing inside the database");
          //connection = DriverManager.getConnection("jdbc:default:connection:");
          connection = new OracleDriver().defaultConnection();
}else{
     System.out.println("Executing outside of the DB");
     DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
     connection = DriverManager.getConnection("jdbc:oracle:thin:@XXX.XXX.XXX.XX:XXXX:XXXX","username","password");
DatabaseMetaData dbmeta = connection.getMetaData();
System.out.println("Driver Name = "+ dbmeta.getDriverName());
System.out.println("Driver Version = "+ dbmeta.getDriverVersion());
return connection;
public static void main(String args[]){
     test();
public static void test() {
     printProperties();
Connection connection = null; // Database connection object
try {
     connection = getConnection();
     String sql = "select 'TEST' from dual";
     Statement stmt = connection.createStatement();
ResultSet rs = stmt.executeQuery(sql);
     ResultSetMetaData meta = rs.getMetaData();
     System.out.println("column count="+meta.getColumnCount());
     System.out.println("column name="+meta.getColumnName(1));
     System.out.println("column type="+meta.getColumnType(1));
     if(rs.next()){
          System.out.println(rs.getString(1));
} catch (SQLException ex) { // Trap SQL Errors
     System.out.println("MEssage: " + ex.getMessage());
     System.out.println("Error Code: " + ex.getErrorCode());
     System.out.println("SQL State: " + ex.getSQLState());
     ex.printStackTrace();
} finally {
try{
if (connection != null || !connection.isClosed())
connection.close(); // Close the database connection
} catch(SQLException ex){
ex.printStackTrace();
Message was edited by:
jason_mac

Jason,
Works for me on Oracle 10.1.0.3 running on Red Hat Enterprise Linux AS release 3 (Taroon).
Java code:
import java.sql.*;
* Oracle Java Virtual Machine (OJVM) test class.
public class OjvmTest {
public static void test() throws SQLException {
    Connection conn = DriverManager.getConnection("jdbc:default:connection:");
    PreparedStatement ps = null;
    ResultSet rs = null;
    try {
      ps = conn.prepareStatement("select 'TEST' from SYS.DUAL");
      rs = ps.executeQuery();
      if (rs.next()) {
        System.out.println(rs.getString(1));
    finally {
      if (rs != null) {
        try {
          rs.close();
        catch (SQLException sqlEx) {
          System.err.println("Error ignored. Failed to close result set.");
      if (ps != null) {
        try {
          ps.close();
        catch (SQLException sqlEx) {
          System.err.println("Error ignored. Failed to close statement.");
}And my PL/SQL wrapper:
create or replace procedure P_J_TEST as language java
name 'OjvmTest.test()';And here is how I execute it in a SQL*Plus session:
set serveroutput on
exec dbms_java.set_output(2000)
exec p_j_testGood Luck,
Avi.

No method found error when calling java stored procedured

hi:
i am rather confused about this. i have written several
java stored procedures and all of them work fine. but when i tried another one , the error message 'no method found 'occurs
when i call the procedure from sqlplus.
it' s a simple procedure . but it's very strange and happens
from time to time
my compile shell as following
javac -classpath $ORACLE_HOME/jdbc/lib/classes12.zip GenFiles.java
$ORACLE_HOME/bin/loadjava -u zw/zw@aixtest GenFiles.class
and
my definition as following
create or replace procedure files(chargeCyckeID varchar2, cycleStart varchar2,cycleEnd varchar2,
loginName varchar2, filePath varchar2, start1 number, end1 number, step number)
AS LANGUAGE JAVA
NAME 'GenFiles.genFile(String , String , String , String , String , int , int , int )';
and my java code is here :
import java.sql.*;
import java.io.*;
import oracle.jdbc.driver.*;
public class GenFiles{
 public static void main(String[] args){
 04UU<F7QV\FZ#,V\FZ?*J<#,V\FZ=aJx#,5GB<C{#, ND<~B7>6#,Pr:E?*J<#,Pr:E=aJx#,2=3$#(Iz3IND<~5D<GB<J}#)
 public static void genFile(String chargeCycleID, String cycleStart, String cycleEnd, String loginName, String filePath, int start, int end, int step){
 try{
 String sqllist = "select customer_id,contract_code, usercode,ani,ord,"
 + " agent_code,linkman, customer_name , postcode,paymethod_category_id ,"
 + " ltrim(to_char(cost,'999999990.99')) cost,call_duration,from listani_file where ord> ? and ord<? order by contract_code";
 String sqlcalls1 = "select a.ani || ',' || a.PASS || ',' || to_char(a.START_TIME,'yyyy-mm-dd hh24:mi:ss') stime || ',' || trunc(a.CALL_DURATION/60)||':'||ltrim(to_char(mod(a.CALL_DURATION,60),'09')) CALL_DURATION || ',' || ltrim(to_char((CALL_AMOUNT/ceil(CALL_DURATION/60)),'999999990.99')) RATE || ',' || ltrim(to_char(a.CALL_AMOUNT,'999999990.99')) CALL_AMOUNT"
 +" from call_fact_mind a "
 +" where a.usercode=?"
 + " and a.ani=? "
 + " and a.period_key<='" + end + "'"
 + " and a.period_key>='" + start + "'"
 + " and a.charge_flag='Y' "
 + " and a.CALL_DURATION>6"
 + " and a.CALL_AMOUNT>0"
 +" order by a.period_key";
 String sqlcalls2 = "select a.ani || ',' || a.PASS || ',' || to_char(a.START_TIME,'yyyy-mm-dd hh24:mi:ss') stime || ',' || trunc(a.CALL_DURATION/60)||':'||ltrim(to_char(mod(a.CALL_DURATION,60),'09')) CALL_DURATION || ',' || ltrim(to_char((CALL_AMOUNT/ceil(CALL_DURATION/60)),'999999990.99')) RATE || ',' || ltrim(to_char(a.CALL_AMOUNT,'999999990.99')) CALL_AMOUNT "
 + " from call_fact_mind a "
 + " where a.usercode=?"
 + " and a.period_key<='" + end + "'"
 + " and a.period_key>='" + start + "'"
 + " and a.charge_flag='Y' "
 + " and a.CALL_DURATION>6"
 + " and a.CALL_AMOUNT>0"
 +" order by a.period_key";
 Connection con = new OracleDriver().defaultConnection();
 try{
 int i = start;
 //8y>]2=3$Q-;7
 while( true){
 if( i>=end ) break;
 genFile(con, i , i+step, chargeCycleID, loginName, filePath, sqllist, sqlcalls1, sqlcalls2);
 i += step;
 }catch(Exception ex){
 }finally{
 if( con != null) con.close();
 }catch(Exception exx){}
 8y>]2=3$Iz3IND<~
 private static void genFile(Connection con, int start, int end, String chargeCycleID, String loginName, String filePath, String sqllist, String sqlcalls1, String sqlcalls2) throws Exception{
 PreparedStatement ps1 = null;
 PreparedStatement ps2 = null;
 PreparedStatement ps3 = null;
 ResultSet rs1 = null;
 ResultSet rs2 = null;
 String fileName = filePath + System.getProperty("file.separator") + start + "_" + end + ".txt";
 BufferedWriter writer = null;
 try{
 writer = new BufferedWriter(new FileWriter(fileName));
 ps1 = con.prepareStatement(sqllist);
 ps2 = con.prepareStatement(sqlcalls1);
 ps3 = con.prepareStatement(sqlcalls2);
 ps1.setInt(1, start);
 ps1.setInt(2, end);
 rs1 = ps1.executeQuery();
 //Iz3Ibuffer,V;SPR;6(<GB<J12EP4HkND<~
 StringBuffer strBuffer = new StringBuffer();
 int i =0;
 //Q-;7:OM,=a9{</
 String preContractCode = "";
 String currentContractCode = "";
 while( rs1.next()){
 currentContractCode = rs1.getString("contract_code");
 if( rs1.getString("ani") == null){
 ps2.setString( 1, rs1.getString("usercode"));
 rs2 = ps2.executeQuery();
 }else{
 ps1.setString(1, rs1.getString("usercode"));
 ps1.setString(2, rs1.getString("ani"));
 rs2 = ps1.executeQuery();
 //Hg9{3vOVPB5D:OM,:E#,<SHk:OM,OnM7,contract_costJG:OM,On7QSC
 if( ! preContractCode.equals(currentContractCode)){
 //TZG0Cf<SHk?UPP
 strBuffer.append("\r\n");
 String contractHead = "\"1\"" + ",\"" + rs1.getString("linkman") + "\",\"" + rs1.getString("customer_name")
 + "\",\"" + rs1.getString("contract_code") + "\",\"" + rs1.getString("agent_code")
 + "\",\"" + chargeCycleID + "\",\"" + rs1.getString("contract_cost") + "\"";
 strBuffer.append(contractHead);
 while( rs2.next()){
 if( i<1000){
 i++;
 strBuffer.append("\"2\"" + rs2.getString(1));
 }else{
 String str = strBuffer.toString();
 writer.write(str, 0, str.length());
 strBuffer = new StringBuffer();
 strBuffer.append(rs2.getString(1));
 i = 1;
 //<SHk7QSC:O<F
 if( rs1.getString("ani") == null){
 String trail = "\"2\"" + ",\"" + "ani: " + "\",\"" + rs1.getString("ani") + "\",\"" + "Total Amount: " + "\",\"" + rs1.getString("cost") + "\"\r\n";
 strBuffer.append(trail);
 }else{
 String trail = "\"2\"" + ",\"" + "usercode: " + "\",\"" + rs1.getString("usercode") + "\",\"" + "Total Amount: " + "\",\"" + rs1.getString("cost") + "\"\r\n";
 strBuffer.append(trail);
 preContractCode = currentContractCode;
 writer.close();
 rs2.close();
 }catch(Exception ex){
 }finally{
 if( rs1 != null) rs1.close();
 if( rs2 != null) rs2.close();
 if( ps1 != null) ps1.close();
 if( ps2 != null) ps2.close();
i need your help!
regards
daniel wang

Hi again, Daniel,
I'm only guessing here, but unless you've made lots of mistakes when
you copied your code to your post to the forum, your method signatures
don't match. The definition of "genFile" in your java class is quite
different to what you wrote in your PL/SQL wrapper.
Also, you have defined "genFile" to be a private method -- I think it
needs to be public.
Also, I think the "main" method doesn't need to be in the "GenFiles"
class -- perhaps you should remove it.
Also, I think in your PL/SQL wrapper you need to use fully qualified
names, so use "java.lang.String" and not just "String".
Lastly, I think you should use the "-force" and "-resolve" flags
with the "loadjava" command.
Good Luck,
Avi.

[b]Java Stored Procedure generating ora-932 in Oracle 9i [/b]

Hi ,
I have written a Java Stored procedure. And I have written a wrapper function as bellow
FUNCTION "GENERATE_AC_EXCEL_REPORT_FN"
( refCursorCall VARCHAR2, fromDate Date, ToDate Date,
nsn VARCHAR2, period varchar2, site VARCHAR2,
vendor VARCHAR2, spotbuyType VARCHAR2, dataType, VARCHAR2 )
return number
as LANGUAGE java
NAME 'accountingExcelReports.excelPrinter( java.lang.String, java.sql.Date, java.sql.Date, java.lang.String,java.lang.String , java.lang.String,
java.lang.String, java.lang.String , java.lang.String) return int';
This function returns 1000 upon successful execution.
This used to execute fine in Oracle 8.1.7.
We installed Oracle 9i recently.
Server version is 9.2.0.2.1.
Jserver version is 9.2.0.2.0 .
Now The function call works fine for the first time. And When execute it for sencond time in the same Session,
The program is erring out saying inconsistent data typpes.
This is happening during passing parameters.
SQL> select
2 generate_ac_EXCEL_report_fn('Period', to_date('7-1-2002','MM-DD-YYYY'),
3 to_date('7-31-2002','MM-DD-YYYY'), NULL,
4 NULL, NULL, NULL, 'ALL' ,'SPOTBUY') from dual;
GENERATE_AC_EXCEL_REPORT_FN('PERIOD',TO_DATE('7-1-2002','MM-DD-YYYY'),TO_DATE('7-31-2002','MM-DD-YYY
1000
SQL> select
2 generate_ac_EXCEL_report_fn('Period', to_date('7-1-2002','MM-DD-YYYY'),
3 to_date('7-31-2002','MM-DD-YYYY'), NULL,
4 NULL, NULL, NULL, 'ALL' ,'SPOTBUY') from dual;
select
ERROR at line 1:
ORA-00932: inconsistent datatypes: expected IN Conversion failed
And upon further testing, i noticed this happens when the dates are passed. If date parameters are nulled out, Then the program executes perfectly any number of times.
The same program worked fine in Oracle 8.1.6
Any ideas?
Please help.
Thanks,
Srinivas

Hi Srinivas,
you shouldn't be calling conn.close() and its not needed when using Server Side Internal driver. If you are calling conn.close, then .....
extract from JDBC user guide
If you do call the close() method, be aware of the following:
All connection instances obtained through the defaultConnection() method, which actually all reference the same connection object, will be closed and
unavailable for further use, with state and resource cleanup as appropriate. Executing defaultConnection() afterward would result in a new connection
object.
Even though the connection object is closed, the implicit connection to the database will not be closed.
http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/java.920/a96654/advanc.htm#1001042
Elango.

ResultSet from Java Stored Procedures

Hi,
How do I obtain a resultset from a Java Stored Procedure?
My stored procedure, deployed in Oracle8i, has Database package as sample.Have published setConnection() and getDept() methods.
Code for Java Stored Procedure:
package SPPackage;
import java.sql.*;
public class StoredProcApplication {
protected static Connection connection = null;
protected static Statement stmt = null;
protected static ResultSet res = null;
public static void setConnection() throws SQLException {
connection = new oracle.jdbc.driver.OracleDriver().defaultConnection();
public static void getDept(Object[] obj) throws SQLException {
if (connection == null) {
setConnection();
if (stmt == null) {
stmt = connection.createStatement();
if (res == null) {
res = stmt.executeQuery("select * from DEPT");
obj[0] = res;
Code for TesterApplication :
package SPPackage;
import java.sql.*;
public class TesterApplication {
private static final String URL = "jdbc:oracle:thin:@sandeep:1521:oracle8i";
private static final String userId = "sandeep";
private static final String password = "sandeep";
private Connection connection;
private CallableStatement stmt;
private ResultSet res;
public void setConnection() throws ClassNotFoundException,SQLException {
Class.forName("oracle.jdbc.driver.OracleDriver");
connection = DriverManager.getConnection(URL,userId,password);
public void getResultFromSP() throws SQLException {
//prepare to call the stored procedure
stmt = connection.prepareCall("{call sample.getDept(?)}");
//register the OUT parameters
stmt.registerOutParameter(1,Types.OTHER);
//execute the query
stmt.execute();
ResultSet res = (ResultSet)stmt.getObject(1);
while (res.next()) {
System.out.print(res.getInt(1) + " | " );
System.out.print(res.getString(2) + " | " );
System.out.print(res.getString(3) + " \n " );
public TesterApplication() throws SQLException,ClassNotFoundException {
try {
setConnection();
getResultFromSP();
} finally {
if (res != null) { res.close(); res = null; }
if (stmt != null) { stmt.close(); stmt = null; }
if (connection != null) { connection.close(); connection = null; }
public static void main(String[] args) {
try {
TesterApplication ta = new TesterApplication();
} catch (Exception e) {
System.err.println("Error while executing stored procedure " + e.getMessage());
e.printStackTrace();
When I run the TesterApplication, I get the following exception :
java.sql.SQLException: Invalid column type: get_internal_type
at oracle.jdbc.dbaccess.DBError.check_error(Compiled Code)
at oracle.jdbc.driver.OracleStatement.get_internal_type(Compiled Code)
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameter(Compiled Code)
Also, if I want to execute the ResultSet in the stored proc itself, and return the values as Arrays of int[], and String[], how do I do it?By default the you can populate only int[0], String[0] , i.e. only one value!!!
if my statement is unknown, i.e, it might return a combination of updates and resultsets, how do I go about processing the result?
Please advise!!
TIA
Sandeep
null

Hi kkirk,
I found the post you mentioned.Well it dates back to November 1999 - "Problem returning resultset or ARRAY from java stored proc" by Stuart Popejoy ([email protected]).Too bad, it is still not solved!!
I am not very good at PL/SQL.However, it would still be helpful, if you could post the code here, or at my email address.
Meanwhile, I was trying this during the week-end.There seems to be a glimmer of hope!!
Let me know, if this makes sense :
CallableStatement cs = connection.prepareCall("begin open ? for select * from dept; end");
try {
cs.registerOutParameter(1,OracleTypes.CURSOR);
ResultSet res = ((OracleCallableStatement)cs).getCursor(1);
while (res.next()) {
//get the values
} catch (Exception e) {
e.printStacktrace();
However, I am getting an exception trace
Error while executing stored procedure Invalid column type: getLong
java.sql.SQLException: Invalid column type: getLong
at oracle.jdbc.dbaccess.DBError.check_error(Compiled Code)
at oracle.jdbc.driver.OracleStatement.getLongValue(Compiled Code)
Not quite sure why this is happening!!
TIA,
Sandeep
null

NameFromLastDDL Error during java stored procedure upload...

Similar Messages

Maybe you are looking for