Names and IPs in Airport App
For Airport App: In the the pictures on the Apple web site under Wireless Clients they show names. All I see are Ip addresses. I'm running on an Ipod Touch 3rd gen and looking at other Ipods and Iphones. How do I get names?
Despite the advertisement or picture, It is not possible to display the device names under Wireless Clients in AirPort Utility. Only the MAC address or AirPort ID of the device will be displayed.
Is is possible to have a Client ID or device name displayed under DHCP Clients, but you have to go into each device individually to set this up. Then the Client ID will be displayed along with other data when you select the DHCP Clients tab.
Similar Messages
-
DNS Issues - Can ping server name and IPs but not FQDNs.
Hi All,
Hopefully some one can help me here, I am having an issue where one of my domain attached servers cannot ping any FQDNs in the environment but it can ping the host names and the IPs and look up the host names from a reverse look up.
We have done the following troubleshooting:
Flushed and registered DNS cache.
Restarted the DNS client and net logon services on the effected server
Preformed standard checks and commands such as:
Checked the event logs and found there were warnings for DNS registration.
Compared the DNS settings in the network adapters across the rest of the servers in the environment and found that they were all the same. DNS Suffixes are added in the correct order and are set to register.
Pinging FQDNs which is not giving any results.
Tracert FQDNs which is also not giving any results.
Nslookup which is querying the DNS server directly and giving results as expected
Ran the command which reported successful: dcdiag /test:registerindns /dnsdomain:sub.domain.net /v
Checked and updated the permissions on DNS for the affected server to give the server full control of its own DNS entry.
Replaced the DNS Client service DLL with one from a server that is working as expected.
Also worth noting is that the affected server (as well as every other server in the environment) has 2 NICs, one that communicates with DNS and AD and the other does not have any DNS IPs set.
Not this is not the first time this happened, a reboot fixed the issue before but it seems to be a reoccurring problem now.
If any one can shed some light on this issue I would be grateful.
Regards,
Steve.Hi Steve,
First, we should confirm if this issue is caused by DNS.
When you ping the FQDN, does the server show the correct corresponding IP address?
If no, there should be some error messages. If it is possible, please post the screenshot of this issue.
To check the process about how does server resolve the FQDN, please follow the steps below:
clear local DNS cache with command ipconfig /flushdns
perform the network capture
ping the specified FQDN
Check the DNS traffic
To download Network Monitor, please click the link below:
http://www.microsoft.com/en-hk/download/details.aspx?id=4865
Besides, have you tried to update the NIC driver to the latest version?
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Setting DNS TTL to 0 for specific DNS names and IPs
A company we do business with has a service we are trying to contact over the internet. They have requested that we set the TTL for their DNS and IPs on a specific port to 0. Im having a hard time understanding what they are asking for. I thought that
DNS ttl is generally set by the Registrar. And can you even have ttl on an ip address? That doesnt make any sense tome. They are asking for screen shots of nslookups of 3 ips on port 1443 and they want to see the ttl set to 0. How would I do that on SBS2011/Server2008r2?
Obvously I only want this on the 3 ips and the dns name, I dont want to set the whole DNS infrastructre to a ttl of 0.Sounds screwy to me!
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+ -
How I save name and password of an app in Iphone5?
Saving time with autofill
Following this article might help: [[How do I make Firefox remember my usernames and passwords?]]
As an extra tip, if you still have your old computer around you can sync all your Firefox data on that computer (history, bookmarks, passwords) over to your new one with Firefox Sync. This article will show you how to do it: [[What is Firefox Sync?]] -
Time Capsule won't accept my user name and password for access - Help!
Hi all,
My Time Capsule seemed to stop working one day and I had to do a hard reset with the little button at the back. After that it worked and I restored my wireless network settings but now I can't access the Time Capsules hard drive with Time Machine.
When I try to choose it as my Backup Disk in the Time Machine preferences it says "Enter your user name and password so Time Machine can access the file server "Our Time Capsule" (the name of my time capsule). However, every time I try to enter my password I get "Sorry, you entered an invalid username or password".
I've already tried several resets of the Time Capsule and I've also tried logging on my computer as the Root user and changing my administrator account password back and forth but no go.
Help! and Thanks.Norman & Harry,
Consider the following:
*_Time Capsule Keeps Asking Me For a Password_*
It will be important to know what is going on, or what you are doing when it asks for the password. Is it asking for a password only when Time Machine attempts a backup? Consider this:
It is NOT your username and password it wants when you try accessing the Time Capsule. (I know... it SAYS "username and password") But it means the Time Capsule's Name and Password.
You will find that by launching Airport Utility.
Select the TC on the left.
Click "Manual Setup".
Click the "Time Capsule" Tab.
You will see "Time Capsule Name:" and "Time Capsule Password".
Make sure “Remember password in keychain" is checked.
That is the information you need to enter when it asks for "username & password."
*I Don’t Remember What My Time Capsule Password Is*
You can see what your current TC password is by going into Keychain.
Open your Keychain and select "login" from the Keychains pane in the top left. Highlight "Passwords" in the Category pane from the lower left.
Sort all the items by Kind. Note everything labeled "Airport...". How many do you have listed? There should only be one "Airport base station password" for each base station that you have active. Also, there should only be one "Airport network password" for each network you have created. If there are more than these, then delete all but the ones with the most recent Modification date.
To see what passwords are being stored, double-click your Time Capsules' entry. A new window will appear.
Put a check beside "Show Password". You may be asked for your own Admin password so enter that.
Now the Password field will display the password you entered into Airport Utility for your Time Capsule
*It Still Won’t Accept the TC Name and Password*
Launch Airport Utility --> Manual Setup.
Select "Disks" in the tool bar above.
Click the "File Sharing" tab.
Is "File Sharing" checked? It should be.
What is selected beside "Secure Shared Disks"? If it says "With Accounts" or "With a Disk Password" then the system will ask you for a password every time it mounts the TC hard disk. If you switch it to "With Time Capsule Password" then use the password you designated earlier in the “Time Capsule" tab. It should only ask you once and then never again - because you had checked "Remember password in keychain".
If you have made any changes then click "Update".
Let us know if this resolves your issue.
Cheers! -
Names and Passwords not saving
I have dowloaded an App but even though i have selected yes to Names and Passwords under settings/safari/Passwords & AutoFill the name and password under the app is not being saved. Other people are not having this same issue
Resolved - it is the priace button that needs to be selected which appears when you select the tabs on the right bottom side of th screen
-
How do I get the user name and password for the Apple Extreme Router to connect to a Slingbox
How do I get the user name and password for the Apple Extreme Router to set up my Slingbox? It will not accept the Apple Extreme Name and password.
The AirPort Extreme does not have a User Name, but it does have a device name and device password, which you may have already tried.
There is also a Wireless Network Name and Wireless Network Password for the AirPort Extreme, which might be what the Slingbox is looking for if you are trying to connect it to your wireless network.
There are no other "user names" or "passwords" on the AirPort Extreme.
You established the device name, device password, wireless network name and wireless network password when you originally configured the AirPort Extreme.
If you cannot remember these, you will need to perform a Soft Rest to reset everything. Follow the instructions in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ -
How to change of NAME and IP after RAC installation.
Hi Friends,
I have a challenge here...Would appreciate if anyone can help me..
I have to install 10.2.0.3 Oracle RAC on windows 2003 server 64 bit.
My issue is now the server names and ips are set and I am going to install the RAC.
But the client need is that after one month, they need to change the names and ips of the servers (a one time change).
Because according to their server naming standards, current production servers are having the acceptable names and ips.
The installation was on a 32 bit OS, so they are facing out of process memory errors. Thats why they are going to 64 bit OS on new servers.
After the new servers are ready, the data will be migrated to new server. After a month, they need to change the names of new servers to that of the old (current production) servers.
Could anybody help me by giving me information about how to change the NAME and IP after a RAC installation ?
Any metalink notes or commands as it is........
Thank you,
Mahesh.Hi,
You can change the IP later but you can not change the hostname of the system.
You have to install CRS freah if you want to change the hostname of the system.
Please let us know which IP you want to change.
You can see the metalink Note.276434.1 for VIP or VIP hostname change.
Regards,
KK -
How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility? My company is using an Airport Extreme in our office now and I want to prevent other employees from messing with the network/settings. Is there a way to place a password on the settings to allow only the admin to access the network name and password?
Hi - you have will have to change the device passwords on all the base stations and then don't give them to anyone except the administrators and tell them not to save them on their computers that use the older versions of the Airport Utility - for the newer versions like the mobile apps, as soon as you enter the pasword it is saved and is visible in the advanced pane along with the network password - so if anyone gets a hold of your iPad or iPhone, they can edit the whole network - I have this same issue with my networks in the office and it is inconvenient but doable - I hope this helps
-
My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.
Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks. -
I just bought a MacBook Pro, and need to d/l my photos from my memory card reader. iphoto keeps coming up as the app to use, but the column on the left says "No name, and shows 0 photos on the black screen. How do I view the photos on the reader?
Did it... When I clicked on "No name", a file folder came up and, I forgot to put MacBook Pro in the name bar... That was it! Maybe someone else can use this post Hopefully...
-
I need help, I want to download the app called 'popcorn time' from online. I know it has no side effects because my friend has used this app for a number of years on her mac computer. I found it on the internet and have nearly downloaded it but my security system won't let me I followed the instructions to get the security system to make an exception for this app but at the end of the instructions it has a log-in pop up that says "OS X is trying to allow an item to always run. Type an administrator's name and password to allow this." I don't know what it means by an administrators name and password I typed my apple ID but this didn't work. I checked if i had the right password and i did and i have tried it multiple times but it still doesn't work this is very frustrating and I need to fix it
Answered in the other thread you posted in:
i am trying to download new software and my mac keeps asking for the administrator name and password... i enter my apple…
Please don't post in more than one place. It can lead to people wasting their time answering a question which has already been answered elsewhere. -
Trying to update my apps on the iPhone 3. When I type in user name and password, I get the message "Cannot connect to iTunes Store" How can I connect?
I have the same problem. Any suggestions?
-
hello guys ..when i try to update any applecation..it puts the first user a ccount and it ask the password which i dont know it cause im not the first user of this i pad ,,,,so how can i changebit to update apps dute to my account name and password???
please answer meDelete all apps that were purchased with the former ID and renown load or purchase them with your ID.
-
I changed user names and apps won't update, please help?
Can anyone help me, I recently changed my username and email on my iphone, ipad and imac, but the iphone apps are not updating since is asking me for the old user name and password, which I don't remember. Thank you.
Purchased items are forever tied to the Apple ID that they were purchased with. If you don't remember the Password, log onto Manage your Apple ID, and click on Reset Password: Apple - My Apple ID
If you don't remember your Security Questions, contact Apple Support to have them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB
Maybe you are looking for
-
ITunes won't open after upgrading to OSX Mavericks
I've just upgraded to Mavericks on my Macbook Pro and after completing the installation iTunes 11.1.2 will not open any more. When I try to open iTunes the software name shows in the upper right corner as normal, but a blank box with an "ok" button p
-
Telling ID CS5 to seek a linked file in the current folder
For at least 5 years (and all the versions of ID), I've been unable to set up a link on text or a graphic that, when clicked, will open another PDF, because I want Acrobat Reader to look for the new PDF file in the same folder/directory as the curren
-
How do i create a new category in iBooks
When I select the Categories view in iBooks for Mac OS X I can see several categories listed in the left pane of the window. How do I create a new category, and how do I move a PDF file into the new category, or any existing category?
-
Sluggish performance and slow visio image loading in Acrobat Reader
I have created a pdf file with the Adobe PDF-"printer" from an original Word document. The Word document contains image components from Visio, which have been copy-pasted into the Word document (for instance a UML diagram). While the performance in W
-
Dear Team, I have implemented OBIA 7964 for HRA. Some reports throw the error Graphing engine is not responding.A fatal error occurred while processing the request. The server responded with: java.lang.NumberFormatException. It is not happened all re