Names.exe does not get installed when installing oracle

Hello Group,
I have installe Oracle 9.2 server on a Windows 2000 SP 4 machine and am configuring this as an oracle names server. The configuration is succesfull, however the service cannot be started 'coz the service is configured to execute the files names.exe from the folder c:\oracle\ora92\bin\names.exe.
However, i have searched twice but this file does not exist on the server. I am not sure if i am missing something.
Any help would be appreciated.
Thanks and Regards,
Ashish

Hello Ashish,
I've got the same problem after installation Oracle 9.2.0.1 for Windows.The file names.exe was missed.
And what is more I installed twice this product and in both cases I could find names.exe in bin directory.
May be I have to set special option for Oracle Names before the installation.
Did you resolve this problem?
Thanks for help.
Andrey

Similar Messages

  • Tried syncing entire music library to ipod but some albums were skipped.  tried click and drag album but device does not get highlighted when i drag album there. any suggestions?

    I tried syncing entire music library to ipod.  some albums were skipped.  tried clicking and dragging but device does not get highlighted when i drag the album to the device. How can I sync album to ipod?  the album is imported and not purchased thru itunes store.

    Does it play in iTunes on the computer? What is the format of the album?
    Right click and select Get Info. Look under File in iTunes 12

  • Workflow initiator does not get workitems when PR Approve rejects.

    Hi,
    Workflow initiators does not get workitems when PR Approve rejects.Is there any thing missing in that .
    Please let me know .
    Regards,
    Gurprit Bhatia
    Edited by: GURPRIT BHATIA on Jan 28, 2009 8:38 AM

    Hi GB,
    In order that the WF initiator gets workitems on PR rejection, you need to assign method 'InfoReleaseRejected' (BO BUS2009) to a task in the PR rejection flow of your WF. If this is done, then check if you have assigned WF Initiator as the Agent in that task.
    Hope this helps.
    Thanks,
    Ajay

  • Applet does not get loaded when viewed in a browser

    Hi,
    I have an applet,which works fine when I use appletviewer to see it. But from the browser, the applet does not get loaded.
    An error appears at the bottom of the browser that load: class not found.
    Any suggestions...please..
    Thank you....
    Pooja

    If you are using Internet Explorer, you should check to see if your browser is set to use Sun's JRE that came with your download of the SDK. (If you didn't install the JRE, you need to go back and run that on your machine. You can check to see if you are using Java's runtime enviornment (JRE) in Internet Explorer by opening IE and going to Tools --> Internet Options... --> and then going to the Advanced tab. Scroll down and make sure the box next to Java Sun "use Java 2 for <applet>" is checked. If that option is not available, you need to install the JRE.
    If that doesn't help, try using the HTML converter that comes with the SDK. It'll take your current HTML page, and you can customize it to force a download and/or usage of the JRE for applet viewing if for your particular browser.
    Hope one of these helps!

  • Sender File Adapter does not get files when there is a large number ( 300)

    We are on XI 7.0 (SAPKB70015)
    We have an issue picking up a large number of files from a particular server. We are trying to pickup the files based on a wildcard e.g. test
    - we can retreive up to 200 files from the same server (using the same config) no problem
    - we can pull lots of files (>3000) files from other servers (using the same config) no problem
    - we can write an mget command (mget test) to reteive the files no problem
    So the only issue is retrieving a large number of files from a parfticular server. We see no errors in the RWB.
    To get this sorted out we need to find the exact commmands that XI executes to attempt to retrieve the files. Can anyone point me in the right direction on how to find this.
    Thanks
    Richard

    It turned out that this was caused by a limitation on the ftp server.
    The file adapter uses the dir command to get a listing of the files matching a specific mask. The dir command does not return any files if there are a large number (the ls command works fine but the file adapter uses dir instead of ls).
    sap told me that 'According to this FTP server is no compliant with RFC 959 and that is
    why DIR command returns an error.'
    We were able to get this resolved by applying a patch on the ftp server.
    Thanks
    Richard

  • "Message Processor" does not get assigned when saving the document.

    Hi folks!
    When creating a support message (SLFN) and saving the document usually the BP of the current user got assigned to the partner funtion "message processor".
    This used to work but does not anymore. Now I cannot find the reason why.
    I think I could achieve this via customizing "Make Settings for Change Transaction Types" and using "Specify Copy of Current User" but I am pretty sure this was not customized before.
    I could use partner determination procedure, too. Access sequence "User" but still I am not sure this was customized before.
    I am using SLFN transaction type service provider scenario (SLFC0001)
    Anyone got an idea?
    Thanks in advance.
    Regards
    Edited by: Christian Kaunzner on Mar 25, 2009 5:15 PM

    Hi Christian,
    did you solve this issue on your own? can you share your experience?
    thanks
    Pedro Rodrigues

  • Task Does not get triggered when User is created through API

    Hi,
    Each new user in our OIM environment is supposed to have a iPlanet account. I have configured the access policy for the same and it works.There is also a process task which needs to be triggered once the user is successfully created in the DS. Following is my issue:
    1.When the new user is created through the admin console, the user is provisioned successfully to DS as well because of the access policy and the task also gets triggered successfully.
    2. There is an approval workflow for another resource, at the end of which a user needs to be created through APIs in OIM. The user gets created successfully in OIM and also get provisionined to DS just like in the above use case. However, the task fails in this case. I see that the task is being triggered from the user's resource profile, but the status is rejected.
    Can someone please tell me why is this happening. I initially though there was some issue with my adapter for the task, but in case 1 it works just fine.
    Following is the exception I get as soon as the iPlanet connector finishes creating the user in DS:
    java.lang.ClassCastException: java.lang.String
    at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSETFIELDSONUSERCREATE.implementation(adpSETFIELDSONUSERCREATE.java:51)
    at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
    Thanks,
    Supreetha

    Hi,
    Have you checked the process data that you are passing to this adapter and check the mapping of process data to the adapter variable. Try to log the value which you get from process data. I got this error when I was trying to use the literal value from process data as "true" for a boolean value. This is a bug. This value is not actually a boolean value. It threw me error too sometimes back. Either you pass the boolean value from adaptor factory as a literal value or change the type boolean both in your code and the adapter.
    OIM works strangely. ;) All the best,
    Manila

  • Window does not get repainted when gains focus.

    Hi All,
    I have a JFrame, on clciking on button the processing takes some time to execute.In this time some other window(eg. commnad promp) overlaps JFrame.After this if I minimize the command prompt, nut the Jframe doesnt get repainted.
    Can any one help me to repaint Jframe.
    THanks in advace
    cheers

    A time-consuming process should not be performed by code that is executing on the UI event dispatch thread because it blocks all event and paint handling. Run your time consuming process in a separate thread, i.e.,
    myButton.addActionListener(new ActionListener()
    {  public void actionPerformed (ActionEvent ev)
       {  new Thread()
          {  public void run ()
          }.start();

  • My iphone does not get recognised when i plug in my phone to my laptop

    seems since i backed up to icloud
    how can i get back to computer back up as now no options available

    Looks like you'll have to visit your next Apple Store or contact Apple to get it serviced. Apple - Support - Service Answer Center

  • SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

    Hi,
    Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
    SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
    also it gets installed through sccm when the machine is set to english language, 
    Thank you
    Tanoj
    OSLM ENGINEER - SCCM 2007 & 2012

    Hi Friends,
    we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
    i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
    some errors which sccm reports display are 
    11171
    10008
    10021-
    17031 - 
    1602 - User Cancelled installation
    113 - No more internal file identifiers available
    10070 - File handle reference is no longer available
    10050 - A socket operation encountered a dead network
    11170  - The task sequence manager could not successfully complete execution of the task sequence
    i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
    Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
    is there a way to cut short the Task seq and keep it simple ?
    right now its like this 
    1. checking for prerequisite : checks for OS Name and OS version
    2. installs PGP Bootgaurd Bypass
    3. System Restart
    4. Installing Windows 7 Service Pack 1
    5. Final Restart
    6. uninstall PGP Bootgaurd Bypass
    Regards
    Tanoj
    OSLM ENGINEER - SCCM 2007 & 2012

  • After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

    After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
    During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

    I had the same problem and found the solution here:
    https://discussions.apple.com/thread/3189272

  • OKI 5500n driver does not get installed......

    I tried it on Macbook Pro intel and MacPro xenon.
    in os 10.5.3 the printer just stopped working!!!
    When I install the new driver from oki.com It appears that is is getting installed properly but I can not find the driver. I created a separate folder but still does not get installed!!!!
    Please help!!!

    I just got this working, after calling Okidata at 1-800-oki-data as someone suggested. I had tried installing all the drivers from the oki web site which apparently was not the best thing to do.
    The final procedure that worked was:
    1) Move Library/Printers/Okidata folder to trash and empty trash
    2) Move all other folders in that Library/Printers directory, EXCEPT for PPDs) to a temporary directory on the desktop
    3) Reboot
    4) Install OSX5C5500E driver
    5) Open System Preferences/Print&Fax
    6) Click + to add a a printer
    7) IGNORE THE OKI PRINTER THAT APPEARS THERE
    8) Select "More Printers"
    9) Under Oki USB, a printer driver will show up - choose that one.
    10) Print - it works now!
    11) Move other printer drivers back into Library/Printers
    12) Enjoy using Okidata printer rather than buying lots of HP ink.

  • I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication ra

    I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication range a month from now?

    The CC version will not activate with your perpetual CS6 license. Download the version from here:
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    Your number should work with this version.

  • 0PS_C02 update rules are not getting activated when i install 4rm BI conten

    Hi All,
    In BI Dev. sys for PS module-  Project System - Dates 0PS_C02 cube-  update rules are not getting activated when i install from the business content and its giving the error  " IC=0PS_C02 IS=0PS_DAT_PRJ error when checking the update rules                Message no. RSAU461" .
    I deleted the inactive update rules(6 nos) and installed again from BI Content, then the same issue raising.
    Can anyone help me out as i stuck up with this to move to go-live.
    Thanks,
    Sakali

    Hi Vassu,
    here are some of the reasons for getting error in update rules activation.
    1. Check the formula or routines that are used in Update rules and check is there any syntax errors.
    2. check whether the mappings are correct or not.
    3. check the info objects which ur used for mapping are in active or not..
    (or) if the info object may be deleted which ur using for mappings.
    Thanks
    Sai Chand.

  • My itunes does not get the names of all tracks which i import.

    When i import a cd into itunes, it does not get any track names. Why is this.
    Also, itunes does not connect to the music store. It tells me that i should check my connection etc etc. Are these problems related, and what can i do to fix it?

    Let me guess, did you just install/upgrade iTunes?
    If so, then it's surely your security software (firewall, web accelerator, privacy filters, etc) that is blocking iTunes.
    The iTunes "upgrade" is actually an uninstall, then total new install, of iTunes and QuickTime. Many security packages such as Norton, Zone Alarm, Google Web accelerator, McAfee, PCillin (...the list is long) see this new iTunes install as a malicious threat, and block out the previous settings without telling you.
    Go to your security software vendor's website and see if they have directions for allowing iTunes & QT back in the list of programs allowed to access the internet.

Maybe you are looking for