Names not appearing

when I receive calls on my Q10 the names do not appear even though they are in my contact list. This happens with calls from within my country (Kenya). I have saved my numbers with +254 being the country international dialling code. Any suggestions? This was not an issue on my previous device BB Bold

http://www.blackberry.com/btsc/KB33480
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Full qualified host name not appearing in url within WSDL generated from PI

Hi
We are on PI711 ( AIX OS ) and are stuck with an issue of the fully qualifed hostname not appearing within WSDL file generated in PI71 for a webservice it exposes using the Integration builder
We changed the host name in exchange profile ( all locations ) from hostname to hostname.companyname.intra and also in the ABAP stack as recommended in all OSS notes.
We use the Integration Directory --> Sender Agreement --> Display WSDL option to generate the WSDL.
Its to be noted that all locations ( including url for WSDL ) have the fully qualified hostname except the url within the WSDL.
Dioes anyone come across this issue/ know which parameters to be updated on the PI server to make the url within the WSDL for the PI webservice to have the fully qualified host name ?

HI Karthik,
As Mentioned by Baskar donu2019t use proposed URL .. while creating WSDL in Id.. but instead provide URL in following format and use it in that place and create WSDL.. details about URL format..
the URL format is fix. and it is simple.
http://host:HTTPPort/XISOAPAdapter/MessagingServlet?channel=party:sendersystem:CC_sender
in above URL provide your sender service component name instead of sender system.
and provide SOAP sender communication channel name in place of CC_sender
provide your PI system host and http name in place of host and https and use this..
for more details about URL..
Propose URL when Configuring Sender SOAP Adpater
soap url
Thanks,
Bhupesh

(Continuity) Caller Id name not appearing in mac

Hi every body
I face problem with some calls, the Caller Id name sometimes not appearing in incoming call for mac (Continuity) only numbers.
Please note that all the calls i get it has name in my contacts and it's already in iPhone and mac contacts app.
Any ideas how to fix it.

Thanks for all your reply,
I found that we have Avaya Definity System with S8700 & found configuration documentation :
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/410364av.pdf
What I found that Avaya side is configured for Qsig ; Basic Supplementary Services is not enabled (System Parameter & Customer options) .
I also found this document ( http://www.svcc.cc.il.us/UserMenu/employees/telephone/images/buttons.pdf Page 362) about Supplementary Service protocol value which most likely change which Qsig Avaya side use.
Once again thank you all , will let you know if things work .

Event name not appearing in calendar

We currently have Novell Groupwise 8 as our email system and we are syncing with the iPad by using the Microsoft Exchange, when creating a new event, the event name does not appear on the calendar?? Event names for previously created events are showing but not a newly created event. On the calendar, the start time of the event shows but not the event name, it appears as a "New Event" not what has been listed in the subject line when the event is created. It is not consistent and I can't figure out what is causing the problem...

this is even weirder - when I backed out of the forum page and re-entered the discussion via the pulldown menu on the left hand side of the support homepage (iCal/then discussion forums link next to the iCal icon), the post message link appears. Coming into the discussions via the support link on the apple homepage, then discussions link under the Mac graphic, doesn't allow me to post....

Artist name not appearing in list

I received a new Ipod Classic 160GB for Christmas. I have transferred some CD's to it and some of the names of the artists are not appearing in the list of names. The albums are there - is there any way to get these to display? Thanks!

... and as well as the helpful answers provided by planb77 and Jeff there is another little trick you could try.
Remove the Compilations heading from the *Main Menu* of your iPod. This will then cause all the artists who only appear on compilation albums to appear on the iPod/music/Artists* list.
To remove the Compilations heading, go to *Settings/Main Menu* and make sure Compilations does not have a tick next to it.
Phil

Name not appearing in Dynamic Stamps

Hi.
When I insert a dynamic stamp, such as reviewed,approved etc, into a pdf my name does not appear as the reviewer/approver.
I am using Adobe pro9 and Windows 7.
Thanks.

Is your copy of Acrobat up to date with version updates?
The current version is 9.5.1.
Have you turned off JavaScript in Acrobat?
Did you create the dynamic stamp?
Have you completed "Identity" category in Acrobat's Preferences?
Do the Dynamic stamps supplied by Adobe work?
What is the code you are using to insert your name?
The code supplied by Adobe for their Dynamic stamps:
event.value = (new Date()).toString();
AFDate_FormatEx("h:MM tt, mmm dd, yyyy");
event.value = "By " + ((!identity.name || identity.loginName != (event.source.source || this).Collab.user) ? (event.source.source || this).Collab.user : identity.name)
+ " at " + event.value;

Domain Names Not Appearing In Drop Down of Data Cleansing Task

For some reason, in several of my DQS data cleansing tasks, the domain names of the knowledge base I choose are not appearing. This is turn leads to an error message stating that "No domain field has been mapped to the input column...".
The task can see the DQS server and it can see the various knowledge bases on that server, but the domains are not appearing.
Has anyone else run into this issue?
Thanks!!
A. M. Robinson

I have just found the same issue.
For me, I believe it is because the domains are only used in matching rules, which the SSIS task does not support. Therefore they are not in the drop down as the SSIS DQS task cannot use them. Only map domains for data correction and you should be ok.

Contact names not appearing in texts or when calls recieved

I got off a plane from the UK to the US (this was a return trip, i'm from the US on Verizon) and when I turned my iPhone 4S back on, all of the contact names (who are in my Contacts) disppeared from emails, texts and my phone log. A friend told me to "Import SIM Contacts" but that didn't do anything. I deleted all of my texts hoping that when I sent new texts and recieved calls names would appear, however they still are not. Is there anything I can do other than take it to the Genius Bar?

I didn't have the problem when returning from International, but I did have the problem right after my new Verizon iphone was set up last week.
After reading some of the posts in the support forum, I first edited my contacts to include the +1 in front of the phone numbers (this may have been an unnecessary step, and it certainly was an annoying one).
Second, I used the *228 set up feature, closed the phone, contacts and text functions on the phone, then turned the phone off and back on, and it seemed to fix the problem for the most part. I think if you search the forum for *228, you will find posts that have the full sequence of steps to follow..
I have other issues with my phone, but at least this one seems cleared up for now.

Contact names not appearing in group text

When sending a group text the contact names do not appear but the phone numbers do, is there a way to change this? Phone is a Z30 STA100-5

I didn't have the problem when returning from International, but I did have the problem right after my new Verizon iphone was set up last week.
After reading some of the posts in the support forum, I first edited my contacts to include the +1 in front of the phone numbers (this may have been an unnecessary step, and it certainly was an annoying one).
Second, I used the *228 set up feature, closed the phone, contacts and text functions on the phone, then turned the phone off and back on, and it seemed to fix the problem for the most part. I think if you search the forum for *228, you will find posts that have the full sequence of steps to follow..
I have other issues with my phone, but at least this one seems cleared up for now.

Please help! Artist names not appearing in ipod after syncing!

Hey there everyone, I really really need some help with this problem that I have now had for 2 months. I have this problem on 3 different ipods so I know it is not a problem with the ipod, it is with itunes.
My itunes library is in perfect order and set up how I want it to be when in my ipod, e.g, every song has the artist, album and song name in the correct places in the 'get info' tab, and appears in the correct places in the itunes library.
However, when I synchronise my ipod with itunes, the artist tab in the ipod consistently says 'no artists'. However, the songs are in the songs tab and albums in the albums tab, but it doesn't register the artists. Because of this I can't search for the artists I want.
I have spoken to apple numerous times and they haven't been able to tell me what is wrong with it. I'm at my wits end with this and so greatly appreciate any help or advice anyone can give.
Things I have tried so far include, changing ipods, selecting all as part of a compilation, deleting the music from itunes and then putting back into itunes. None of this has worked.
Please help
Thanks

*When I rip CD's onto iTunes and then upload them onto my iPod some of them DON'T APPEAR ON THE 'ARTIST' section of my iPod Nano.*
There are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song has no album name associated with it or 2) the song is marked as part of a compilation.
If tracks are missing an Album name in the Info tab, this information needs to be filled in. The no album one is a bit quirky as the songs will appear under certain circumstances (for instance I read somewhere that if you have at least two tracks with different album names the rest will appear), however the simplest remedy is just add None or Miscellaneous to all the blanks in place of a title. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod
Also if the tracks are ticked in the Get Info>Info tab as part of a compilation, they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Setting "Compilations" on your iPod main menu prevents you getting lots of single artist entries when you load an album by various artists.

Record set file names not appearing ?

Could anyone tell me why the file names for the record sets that I'm creating don't show up. The "lightning bolts" representing the data show up under the rs name and it appears within the code, but the file names are not next to the bolts as expected ?
Thank you,
Fred...

Hello PZ,
Thanks for jumping in and trying to help. Sorry for my ignorance when
it comes to this as I am just diving into the world of data bases
using php and mysql. I believe I was referring to the created "table
set name" and the "fields" within them (see bottom) . In the bindings
panel the lightning bolts appear under the created table set, but the
name of the table set is not appearing and these highlighted file
names "fields" that should be next the lightning bolts to identify
them are not appearing. These names , and so on
appear in the code but not in the bindings panel next to the lightning
bolts to help me identify which one I am choosing .
The php page is working the way I want but I have to go through the
process of elimination to figure out which "field" e.g
I'm choosing when placing them in a table in my dreamweaver page. I
hope I am explaining myself properly and thank you very much again for
your efforts.
Fred...
Here is the code I'm talking about and a picture of the database I'm
getting them from.
Year built
Floors
Address
Elevator
Doorman
Gym
Contact
Pets
Parking
Fireplace
Phone:
Email:
Description:
buildingID     propName     address     neighborhood     phone     email     floors     do orman
elevator     pets     yearBuilt     propPic     inParking     outParking     fireplace
description     gym
               14     BC670     280 East 2nd Street     Downtown     2125559876     [email protected]
     6     0     0     0     1977     BC670.jpg     0     0     0     Located between Avenues C and D at
Houston Street ...     0

IMovie Folder Names Not Appearing

Hi,
iMovie has scanned my Aperture library but the folder/project names are not appearing in iMovie. Any idea why this has happened?

Thank you

Contacts' name not appearing when called locally while travelling !!!

iPhone 3G 3.0
When called locally abroad during travel the contact name does not appear. I have stored all my numbers in Int'l format.
Is there a fix / tool to sort out this issue?

I used to experience this. What I do now is store multiple versions of the same number, with and without the country codes. Mostly I use the country code version to dial out, while the phone uses the non-country code version to ID in-coming calls.
For example, Contact "Buddy #238" may have two phone numbers, even though he really has just the one:
78 (555) 123-1234, and
(555) 123-1234
I'd use the first to call out, but the in-coming calls may tend to show up as the second. Coming to think of it, which of the two number formats does your caller ID display when your friends call? Does any of this seem applicable at all? If you notice a different format for in-coming calls, just add that number to the existing contact(s).

Contact names not appearing on iphone 6

Yesterday I noticed when I received a call the person's name did not appear. Well today in my favorites- no names just phone number.And in my Contacts there are quite a few missing. I did do Backup Assistant yesterday as I was prompted to do so. Never had a problem before when i ran backup assistant.
Any ideas of what I can do to fic this problem?

Hi Sandy1624,
Thank you for visiting Apple Support Communities.
It sounds like some Contacts are missing after backing up your iPhone. I know it can be frustrating when data is unexpectedly lost.
If you're using iCloud contacts, you may want to log on to iCloud.com to make sure the contacts are correct there. If so, use these steps to re-sync your contacts on your iPhone:
Turn iCloud Contacts off and back on
Tap Settings > iCloud.
Turn Contacts off.
You can choose Delete from My [device] if your data exists at icloud.com/contacts and on one or more of your devices. Otherwise, choose Keep on My [device].
Wait a few minutes, then turn Contacts back on.
From:
Get help using iCloud Contacts - Apple Support
If your Contacts were only on your iPhone, it may be necessary to restore the data from your backup. See this article for more help with restoring from a backup:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
All the best,
Jeremy

Vendor Name not appearing in NWDS

Hi,
We have successfully installed and made necessary post-installation steps, configurations in our NWDI system. Product, software unit, Software component were created in the SLD and Name Prefixes were also defined. I have also created users for developers in NWDI and SLD, and assigned them with role NWDI.Developer. But when the developers login they could successfully login with an error message login failed and import configuration. when we import this configuration into Developers NWDS and try to create a new DC only sap.com vendor appears and no other vendor is displayed.
What could be the issue and where i have lost? Kindly suggest on this
regards,
Anand

Hi Anand,
1.Click on Home link to enter SLD Home. Click on Technical Landscape link under Landscape.
2.Select Web AS Java and click on New Technical Landscape button.
3.Technical System Wizard will appear. Select Web AS Java and click on Next button
4.Enter the following configuration for Technical System and click on Finish.
5.Web AS ABAP: None (Standalone J2EE)
System Name (SID): J2E
System Home: <Machine Name>
6.Choose System Landscape Directory as the Technical System Type and click on New Technical System.
7. Select System Landscape Directory as the Technical System Type and click on Next.
8. Enter the following configuration for Technical System and click on Finish.
Web AS Java: <instance name> on <machine name>
Roles: Landscape Server & Name Server both selected.
CIM Server URL: http://<Machine Name>:<port>/sld/cimom
Object Server: <Machine Name>
after that go sld home page
--> select name Reservation
Choose Define Namespace Prefix
Define following prefix:
Name Category = Development Component Name
Namespace Prefix = example.org/tech
Purpose = Used By Developer (default)
Owner = <user currently logged in>
Description = can be empty
Choose button create.
Define second prefix:
Name Category = Development Component Name
Namespace Prefix = example.org/appl
Purpose = Used By Developer (default)
Owner = <user currently logged in>
Description = can be empty
Choose button create.
After this Go devinf page and select systemLandscape and select the updateCMS page.
Now go to the IDE and check that Sap name server appear on the IDE.
Now its has been solved 100%.
Please give me reward points,if its help to u
Thanks,
Regards,
Mutyal

Names not appearing

Similar Messages

Maybe you are looking for